Re: [QGIS-Developer] QGIS builds source for qtwebkit?

[Alexandre Neto via QGIS-Developer]

One more question,

Are there any plans to use the new sources? There's only a pre-release by now, 
but at least it's active.

Thanks,

On Mon Jun 19, 2023, 07:51 AM GMT, Alexandre Neto 
 wrote:
> Hi Jürgen!
>
> Thanks you very much.
>
> Alex
>
> A domingo, 18/06/2023, 21:09, Jürgen E. Fischer via QGIS-Developer 
> mailto:qgis-developer@lists.osgeo.org>> 
> escreveu:
>> Hi Alex,
>>
>> On Fri, 16. Jun 2023 at 13:39:26 +, Alexandre Neto via QGIS-Developer 
>> wrote:
>> > Are we (actually Jürgen) building qtwebkit from source? what is the source 
>> > that is being used. At conda-forge we were using the link below, which was 
>> > removed from qt.io  > site.
>> >
>> > http://download.qt.io/snapshots/ci/qtwebkit/5.212/1600955993/src/submodules/qtwebkit-opensource-src-5.212.tar.xz
>> >  
>> > 
>> >  
>> > > >  
>> > >
>>
>> The recipe is at
>>
>> https://github.com/jef-n/OSGeo4W/blob/master/src/qtwebkit/osgeo4w/package.sh 
>> 
>>
>> so the package was built with:
>>
>> https://github.com/qtwebkit/qtwebkit/releases/download/qtwebkit-5.212.0-alpha4/qtwebkit-5.212.0-alpha4.tar.xz
>>  
>> 
>>
>>
>>
>> Jürgen
>>
>> --
>> Jürgen E. Fischer norBIT GmbH Tel. +49-4931-918175-31
>> Dipl.-Inf. (FH) Rheinstraße 13 Fax. +49-4931-918175-50
>> Software Engineer D-26506 Norden https://www.norbit.de 
>> 
>> QGIS release manager (PSC) Germany IRC: jef on Libera|OFTC
>> ___
>> QGIS-Developer mailing list
>> QGIS-Developer@lists.osgeo.org 
>> List info: https://lists.osgeo.org/mailman/listinfo/qgis-developer 
>> 
>> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-developer 
>> ___
QGIS-Developer mailing list
QGIS-Developer@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-developer
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-developer

Re: [QGIS-Developer] QGIS builds source for qtwebkit?

[Alexandre Neto via QGIS-Developer]

Hi Jürgen!

Thanks you very much.

Alex

A domingo, 18/06/2023, 21:09, Jürgen E. Fischer via QGIS-Developer <
qgis-developer@lists.osgeo.org> escreveu:

> Hi Alex,
>
> On Fri, 16. Jun 2023 at 13:39:26 +, Alexandre Neto via QGIS-Developer
> wrote:
> > Are we (actually Jürgen) building qtwebkit from source? what is the
> source that is being used. At conda-forge we were using the link below,
> which was removed from qt.io  site.
> >
> >
> http://download.qt.io/snapshots/ci/qtwebkit/5.212/1600955993/src/submodules/qtwebkit-opensource-src-5.212.tar.xz
> <
> http://download.qt.io/snapshots/ci/qtwebkit/5.212/1600955993/src/submodules/qtwebkit-opensource-src-5.212.tar.xz
> >
>
> The recipe is at
>
>
> https://github.com/jef-n/OSGeo4W/blob/master/src/qtwebkit/osgeo4w/package.sh
>
> so the package was built with:
>
>
> https://github.com/qtwebkit/qtwebkit/releases/download/qtwebkit-5.212.0-alpha4/qtwebkit-5.212.0-alpha4.tar.xz
>
>
>
> Jürgen
>
> --
> Jürgen E. Fischer   norBIT GmbH Tel. +49-4931-918175-31
> Dipl.-Inf. (FH) Rheinstraße 13  Fax. +49-4931-918175-50
> Software Engineer   D-26506 Norden
> https://www.norbit.de
> QGIS release manager (PSC)  Germany IRC: jef on Libera|OFTC
> ___
> QGIS-Developer mailing list
> QGIS-Developer@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-developer
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-developer
>
___
QGIS-Developer mailing list
QGIS-Developer@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-developer
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-developer

Re: [QGIS-Developer] QGIS builds source for qtwebkit?

[Jürgen E . Fischer via QGIS-Developer]

Hi Alex,

On Fri, 16. Jun 2023 at 13:39:26 +, Alexandre Neto via QGIS-Developer wrote:
> Are we (actually Jürgen) building qtwebkit from source? what is the source 
> that is being used. At conda-forge we were using the link below, which was 
> removed from qt.io  site.
> 
> http://download.qt.io/snapshots/ci/qtwebkit/5.212/1600955993/src/submodules/qtwebkit-opensource-src-5.212.tar.xz
>  
> 

The recipe is at

https://github.com/jef-n/OSGeo4W/blob/master/src/qtwebkit/osgeo4w/package.sh

so the package was built with:

https://github.com/qtwebkit/qtwebkit/releases/download/qtwebkit-5.212.0-alpha4/qtwebkit-5.212.0-alpha4.tar.xz



Jürgen

-- 
Jürgen E. Fischer   norBIT GmbH Tel. +49-4931-918175-31
Dipl.-Inf. (FH) Rheinstraße 13  Fax. +49-4931-918175-50
Software Engineer   D-26506 Nordenhttps://www.norbit.de
QGIS release manager (PSC)  Germany IRC: jef on Libera|OFTC


signature.asc
Description: PGP signature
___
QGIS-Developer mailing list
QGIS-Developer@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-developer
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-developer

Re: [QGIS-Developer] QGIS builds

[Rudi von Staden]

On Wed, 8 Aug 2018 at 23:47, Nyall Dawson  wrote:

> > I have the build environment set up from scratch on a new computer, and
> I'm getting the same error building mdalprovider in the master branch
> (C:\OSGeo4W64\bin\hdf5.dll : fatal error LNK1107: invalid or corrupt file:
> cannot read at 0x2F0).
>
> I've seen this too. I haven't had time to investigate a proper fix, so
> in the meantime I just edit src/providers/mdal/CMakeLists.txt and
> remove all mention of HDF5. That gets the build working temporarily.
>

Thanks, that worked. I also encountered an issue with `synccrsdb` (MSB6006
cmd.exe exited with code -1073741515). In case anyone else comes across
that, the solution was to copy crssync.exe from 'OSGeo4W64\apps\qgis-dev'
to 'C:\OSGeo4W64\bin'. It's probably in one of the other osgeo4w packages,
but I haven't figured out which one yet.

Rudi
___
QGIS-Developer mailing list
QGIS-Developer@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-developer
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-developer

Re: [QGIS-Developer] QGIS builds

[Nyall Dawson]

On Thu, 9 Aug 2018 at 07:23, Rudi von Staden  wrote:
>
> I have the build environment set up from scratch on a new computer, and I'm 
> getting the same error building mdalprovider in the master branch 
> (C:\OSGeo4W64\bin\hdf5.dll : fatal error LNK1107: invalid or corrupt file: 
> cannot read at 0x2F0). Is there maybe a problem with hdf5.dll from osgeo4w? 
> I've tried downloading the source from 
> https://support.hdfgroup.org/ftp/HDF5/releases/hdf5-1.8/hdf5-1.8.11/src/ and 
> building it, but even then I run into "CPack Error: Error when generating 
> package: HDF5".
>
> Has nobody else had any issues with hdf5.dll? Are the instructions for 4.1 at 
> https://github.com/qgis/QGIS/blob/master/INSTALL still accurate?

I've seen this too. I haven't had time to investigate a proper fix, so
in the meantime I just edit src/providers/mdal/CMakeLists.txt and
remove all mention of HDF5. That gets the build working temporarily.

Nyall



>
> Kind regards,
> Rudi
>
> On Thu, 26 Jul 2018 at 10:34, Rudi von Staden  wrote:
>>
>> Hi all,
>>
>> I'm trying to build qgis from source, but I'm getting a linking error in 
>> `mdalprovider`:
>>
>> C:\OSGeo4W64\bin\hdf5.dll : fatal error LNK1107: invalid or corrupt file: 
>> cannot read at 0x2F0
>>
>>
>> I have successfully built qgis before, so any idea why this would be causing 
>> a problem now?
>>
>> As background, I'm trying to build a particular pull request to help with 
>> testing. The steps I took were:
>>
>> 1. git fetch origin pull/7396/head:rastercalc
>> 2. git checkout rastercalc
>> 3. delete directory build-qgis-test-x86_64 (in QGIS/ms-windows/osgeo4w)
>> 4. run configonly.bat
>> 5. run OSGeo4W-dev.bat (which executes `call 
>> C:\Users\rudi_000\Source\Repos\QGIS\ms-windows\osgeo4w\msvc-env.bat x86_64`)
>> 6. run devenv from command prompt
>> 7. open qgis.sln
>> 8. build
>>
>> I have tried cleaning and rebuilding mdalprovider, but get the same result. 
>> It could be that just repeating the process described above would resolve 
>> the issue (from point 3.), but since it takes several hours to build (I'm 
>> building on a pretty old laptop) I thought I'd ask in case I'm doing 
>> something wrong in the process.
>>
>> Thanks,
>> Rudi
>>
> ___
> QGIS-Developer mailing list
> QGIS-Developer@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-developer
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-developer
___
QGIS-Developer mailing list
QGIS-Developer@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-developer
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-developer

Re: [QGIS-Developer] QGIS builds

[Rudi von Staden]

I have the build environment set up from scratch on a new computer, and I'm
getting the same error building mdalprovider in the master branch
(C:\OSGeo4W64\bin\hdf5.dll : fatal error LNK1107: invalid or corrupt file:
cannot read at 0x2F0). Is there maybe a problem with hdf5.dll from osgeo4w?
I've tried downloading the source from
https://support.hdfgroup.org/ftp/HDF5/releases/hdf5-1.8/hdf5-1.8.11/src/
and building it, but even then I run into "CPack Error: Error when
generating package: HDF5".

Has nobody else had any issues with hdf5.dll? Are the instructions for 4.1
at https://github.com/qgis/QGIS/blob/master/INSTALL still accurate?

Kind regards,
Rudi

On Thu, 26 Jul 2018 at 10:34, Rudi von Staden  wrote:

> Hi all,
>
> I'm trying to build qgis from source, but I'm getting a linking error in
> `mdalprovider`:
>
> C:\OSGeo4W64\bin\hdf5.dll : fatal error LNK1107: invalid or corrupt file:
> cannot read at 0x2F0
>
>
> I have successfully built qgis before, so any idea why this would be
> causing a problem now?
>
> As background, I'm trying to build a particular pull request to help with
> testing. The steps I took were:
>
> 1. git fetch origin pull/7396/head:rastercalc
> 2. git checkout rastercalc
> 3. delete directory build-qgis-test-x86_64 (in QGIS/ms-windows/osgeo4w)
> 4. run configonly.bat
> 5. run OSGeo4W-dev.bat (which executes `call
> C:\Users\rudi_000\Source\Repos\QGIS\ms-windows\osgeo4w\msvc-env.bat x86_64`)
> 6. run devenv from command prompt
> 7. open qgis.sln
> 8. build
>
> I have tried cleaning and rebuilding mdalprovider, but get the same
> result. It could be that just repeating the process described above would
> resolve the issue (from point 3.), but since it takes several hours to
> build (I'm building on a pretty old laptop) I thought I'd ask in case I'm
> doing something wrong in the process.
>
> Thanks,
> Rudi
>
>
___
QGIS-Developer mailing list
QGIS-Developer@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-developer
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-developer

Re: [QGIS-Developer] QGIS builds

[Rudi von Staden]

>
> 1. git fetch origin pull/7396/head:rastercalc
>

Sorry, I fetch from upstream, not origin.

Rudi
___
QGIS-Developer mailing list
QGIS-Developer@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-developer
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-developer