I have imported a set of drone pictures to QGIS. They show the streets
in my subdivision. I want to "record" the cracks in the pavement to be
able to compare them over time. I want to be able to segment the
streets in arbitrary lengths. For each segment, I want to "draw" the
cracks (in layers) to
Hey Dave,
whats up?
Sent you a raster and steps to reproduce. No answer?
Am 13.12.19 um 17:22 schrieb qgis-u...@stripfamily.net:
On 12/13/2019 8:20 AM, Dave Gardiner wrote:
> Hi
>
> I just can't find a suitable one in New zealand
>
> Dave
The SRTM covers New Zealand. This website
On vendredi 13 décembre 2019 13:01:36 CET malcolm wrote:
> The proj definition below is what I am using to convert data using PostGIS
> from NAD83 to WGS84 in a separate application. This creates data that
> matches what is transformed from ArcMap using the ITRF00 transformation
> (which is
On vendredi 13 décembre 2019 12:00:23 CET malcolm wrote:
> Question on how QGIS chooses its transformations. I am assuming it is from
> some proj defaults?? I want to know because I do not see the current
> NAD83<>WGS84 transformation (ITRF00) which is used by HAZUS and Esri. Is
> there any way to
It seems another user has a very similar problem:
QGIS 3: Python doesn't find gdal module
https://gis.stackexchange.com/questions/344713/qgis-3-python-doesnt-find-gdal-module
--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
Question on how QGIS chooses its transformations. I am assuming it is from
some proj defaults?? I want to know because I do not see the current
NAD83<>WGS84 transformation (ITRF00) which is used by HAZUS and Esri. Is
there any way to add this upstream so it is used if not by default at least
as an
On 12/13/2019 8:20 AM, Dave Gardiner
wrote:
Hi
I just can't find a suitable one in New zealand
Dave
The SRTM covers New Zealand. This website provides a fairly
friendly interface to download 30M SRTM DEM tiles.
Molto interessante! lo provo!
--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user
Non ho una risposta per il tuo caso specifico ma per importare in QGIS
2.18.23 un file TIN con formato .xyz ho fatto così :
1) ho utilizzato “Crea un vettore da file di testo testo delimitato” ,
specificando tutti i file *.*.
2) ho selezionato il file .xyz, “Delimitatori personalizzati
Hello,
I found that if the table contains geometry in 3D with SRID 2154, QGIS can't
add the geometry in the table.
If the geometry is 2D, it's ok.
Still, I don't understand why I don't have the PRIMARY KEY column not filled
whereas it is defined in the database...
And why QGIS tells me that the
Hi,
Try an input and output paths without spaces or accents. Is your z value a int
or float rather than a string (text)?
Nicolas
> Le 13 déc. 2019 à 02:50, Dave Gardiner <2dave.gardi...@gmail.com> a écrit :
>
> I see them all and every one I use fails. Take the TIN Interpolation for
> example
Thanks again Alessandro, it's quite a problem for me.
Best, N.
--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info:
Hi,
it is resolved in QGIS master and QGIS 3.10.1 (See this issue report for
reference https://github.com/qgis/QGIS/issues/28914)
Best regards
Matthias
On 12/13/19 11:55 AM, Alejandro Chamizo de Castro wrote:
Muy buenas,
llevo ya tiempo teniendo problemas con el botón "mover selección
Hi Nick,
I've just checked the ticket https://github.com/qgis/QGIS/issues/32740
the issue was fixed but it was not backported to 3.10.x (it still not
backported, I'll see if I can do it).
In any event it won't be available until the next point release.
On Fri, Dec 13, 2019 at 12:02 PM Nick
Thanks Alessandro, it was merged and closed. I'll reopen it and add the
comment there.
Best,
Nick.
--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info:
> Require all granted
> >
> >
> > ErrorLog ${APACHE_LOG_DIR}/map-error.log
> > LogLevel warn
> > CustomLog ${APACHE_LOG_DIR}/map-access.log combined
> >
> > And the permissions look good:
> > ls -l /hom
Muy buenas,
llevo ya tiempo teniendo problemas con el botón "mover selección arriba del
todo" de la tabla de atributos, no realiza la función, si no recuerdo mal,
desde las versiones 3.0. Actualmente continuo con ese problema con la
versión 3.8 Zanzibar.
¿Es un problema general de estas
On Fri, Dec 13, 2019 at 11:44 AM Nick Hopton wrote:
> Version 3.10.1 arrived here during the week. Sad to say it would appear
> that
> the WMS problem persists. Could anyone confirm this?
>
> Should I report this as a bug too?
>
No, if you already reported the original issue please add a
Version 3.10.1 arrived here during the week. Sad to say it would appear that
the WMS problem persists. Could anyone confirm this?
Should I report this as a bug too?
Best,
Nick.
--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
Version 3.10.1 arrived here during the week. Sad to say it would appear that
the WMS problem persists. Could anyone confirm this?
Should I report this as a bug too?
Best,
Nick.
--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
Hi All,
I've changed the configuration fro :
FcgidInitialEnv QGIS_AUTH_DB_DIR_PATH "/tmp/qgisserver"
FcgidInitialEnv QGIS_AUTH_PASSWORD_FILE "/tmp/qgisserver/qgis-auth.db"
The qgisserver Folder inside tmp belongs to www-data and for tje test I set
the permission to 777 :
ls -l /tmp/
drwxrwxrwx 2
Hi,
To me it looks like the server cannot create the path to store its
credentials:
ERROR: Auth db directory path could not be created
Could you probably check permissions if the server is allowed to write
there?
regards
Werner
On Fri, Dec 13, 2019 at 10:03 AM Arnaud Vandecasteele
wrote:
>
Hi Alessandro,
Indeed there is no db file created.
I've checked the link you gave me, but I don't know what to with this. Am I
suppose to execute something ?
Best,
Arnaud
Le ven. 13 déc. 2019 à 12:50, Alessandro Pasotti a
écrit :
>
>
> On Fri, Dec 13, 2019 at 9:17 AM Arnaud Vandecasteele
>
On Fri, Dec 13, 2019 at 9:17 AM Arnaud Vandecasteele
wrote:
> Hi Etienne,
>
> Thanks for your help.
> As suggested, I change the config for :
>
> FcgidInitialEnv DISPLAY ":99"
> FcgidInitialEnv QGIS_SERVER_LOG_LEVEL "0"
> FcgidInitialEnv QGIS_SERVER_LOG_STDERR "1"
>
Hi Etienne,
Thanks for your help.
As suggested, I change the config for :
FcgidInitialEnv DISPLAY ":99"
FcgidInitialEnv QGIS_SERVER_LOG_LEVEL "0"
FcgidInitialEnv QGIS_SERVER_LOG_STDERR "1"
FcgidInitialEnv QGIS_AUTH_DB_DIR_PATH
mhm, not a single one works? can you send me a sample of your points?
Am 13.12.19 um 08:50 schrieb Dave Gardiner:
I see them all and every one I use fails. Take the TIN Interpolation for
example for which my input was:
Vector Layer = Vertices (this is the layer with the extracted vector
26 matches
Mail list logo
