Re: [Qgis-user] QGIS installation problem with Mac OSX 10.8.4 and some Qt4 Modules
Hello, I removed everything from homebrew which could cause problems for a QGIS installation. I just left bison and expat in homebrew, for sqlite I was not sure if I can leave it (see below the brew list). Then I installed the required components according the install instruction, Qt 4.8.5, your frameworks (gdal complete) and postgres+postgis extension, spatialindex 1.8.1and sip 4.14.7. I got stacked installing PyQt 4.10.2. This program looks for sip 4.14.6 which is the old (previous) installation (see below). My interpretation is that the sip 4.14.7 installation was not good, although there was no error message. Any idea? Thank you Marcel Marcels-iMac:PyQt-mac-gpl-4.10.2 Marcello$ python2.7 configure.py -d /Library/Python/2.7/site-packages -b /usr/local/bin -n /usr/local/Qt4.8/qsci -v /usr/local/share/sip/PyQt4 Determining the layout of your Qt installation... This is the GPL version of PyQt 4.10.2 (licensed under the GNU General Public License) for Python 2.7.2 on darwin. Type '2' to view the GPL v2 license. Type '3' to view the GPL v3 license. Type 'yes' to accept the terms of the license. Type 'no' to decline the terms of the license. Do you accept the terms of the license? yes Found the license file pyqt-gpl.sip. Checking to see if the QtGui module should be built... Checking to see if the QtHelp module should be built... Checking to see if the QtMultimedia module should be built... Checking to see if the QtNetwork module should be built... Checking to see if the QtDBus module should be built... Checking to see if the QtDeclarative module should be built... Checking to see if the QtOpenGL module should be built... Checking to see if the QtScript module should be built... Checking to see if the QtScriptTools module should be built... Checking to see if the QtSql module should be built... Checking to see if the QtSvg module should be built... Checking to see if the QtTest module should be built... Checking to see if the QtWebKit module should be built... Checking to see if the QtXml module should be built... Checking to see if the QtXmlPatterns module should be built... Checking to see if the phonon module should be built... Checking to see if the QtAssistant module should be built... Checking to see if the QtDesigner module should be built... Checking to see if the QAxContainer module should be built... Checking to see if the dbus support module should be built... DBus v1 does not seem to be installed. Qt v4.8.5 free edition is being used. Qt is built as a framework. SIP 4.14.6 is being used. The Qt header files are in /usr/include. The shared Qt libraries are in /Library/Frameworks. The Qt binaries are in /Developer/Tools/Qt. The Qt mkspecs directory is in /usr/local/Qt4.8. These PyQt modules will be built: QtCore, QtGui, QtHelp, QtMultimedia, QtNetwork, QtDBus, QtDeclarative, QtOpenGL, QtScript, QtScriptTools, QtSql, QtSvg, QtTest, QtWebKit, QtXml, QtXmlPatterns, phonon, QtDesigner. The PyQt Python package will be installed in /Library/Python/2.7/site-packages. PyQt is being built with generated docstrings. PyQt is being built with 'protected' redefined as 'public'. The Designer plugin will be installed in /Developer/Applications/Qt/plugins/designer. The QScintilla API file will be installed in /usr/local/Qt4.8/qsci/api/python. The PyQt .sip files will be installed in /usr/local/share/sip/PyQt4. pyuic4, pyrcc4 and pylupdate4 will be installed in /usr/local/bin. Embedding sip flags... Generating the C++ source for the QtCore module... sh: /usr/local/Cellar/sip/4.14.6/bin/sip: No such file or directory Error: Unable to create the C++ code. Marcels-iMac:PyQt-mac-gpl-4.10.2 Marcello$ sip -V 4.14.7 Marcels-iMac:PyQt-mac-gpl-4.10.2 Marcello$ which sip /usr/local/bin/sip Marcels-iMac:PyQt-mac-gpl-4.10.2 Marcello$ brew list atk cairo expat gdbmghostscript gsl imagemagick latex2rtf libpng little-cms2 pixman sqlite autoconfcheck fontconfig gdk-pixbuf giflib gtk+intltoollibcrocolibrsvg lzlib pkg-config xz automakecmake freetypegeosglib harfbuzzjbig2declibffi libtiff ossp-uuid proj bison doxygen freexl gettext graphicsmagick icu4c jpeglibgeotiff libtool pango readline Am 05.07.2013 um 19:22 schrieb William Kyngesburye wokl...@kyngchaos.com: On Jul 5, 2013, at 12:01 PM, Marcel Stadelmann wrote: Thank you for answering. In the meantime i got a step forward. I can successfully cmake qgis (see below), but when i do make -j 8 it gives quite a lot of errors. The errors look i. e. like this: [ 56%] Generating moc_qgsabout.cxx In file included from
Re: [Qgis-user] Crash: merge shapefiles
Merge shapes from SAGA GIS (which can be used via Sextante) is quite fast, even with large shapefiles. On Fri, Jul 5, 2013 at 10:25 PM, Giovanni Manghi giovanni.man...@faunalia.pt wrote: Hi, As I've got loads of shapefiles, to define the .prj for each is not realistic (VectorDataManagement ToolsDefine Current Projection). I've looked for a bulk process to create these but without luck Do I need prj files if so, how can I create a load of them? in QGIS master you can use SEXTANTE to batch process files, so you can use the reproject layer tool, and get a copy of your shapes with a proper .prj Then to merge the shapes you can use QGIS, but I agree that is very (very) slow for large shapes or large number of shapes. The faster tool/code I tested is http://gistncase.blogspot.pt/2012/05/python-shapefile-merger-utility.html and it would be very nice to use it to replace the actual python code of the merge shapefiles qgis tool, see http://hub.qgis.org/issues/7208 cheers -- Giovanni -- ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] [Qgis-developer] SEXTANTE adaptation to new SAGA version
Thanks Victor for the great work with SEXTANTE. In Arch Linux distribution is available the SAGA GIS v2.1.0 update to be installed from AUR repositories. https://aur.archlinux.org/packages/saga-gis/ Thanks, Samuel Mesa. 2013/7/4 Victor Olaya vola...@gmail.com Hi all SAGA 2.1.0 has just been released. The current version of SEXTANTE in master has been now adapted to work with SAGA 2.1.0, and raster algorithms will not work with any other version. Please, update your SAGA executables if using the latest master version, since now 2.1.0 is the target version. The only algorithm adapted so far is the raster export one, which, for SEXTANTE, was the most important one that had been modified, since it blocks all other raster algorithms. Other algorithms might have changed, but they are not adapted yet. If you find something that was working before and now it doesn't, please report. Also, if there are new algorithms, feel free to suggest them to be added to SEXTANTE as well, describing their syntax, if possible, to help us do it. Windows users, please notice that the Osgeo4W installer still ships with SAGA 2.0.8, so you will need to install SAGA 2.1.0 manually and change the SAGA path in SEXTANTE. This will be updated soon, so it's just a temporary issue Thanks for your help Victor ___ Qgis-developer mailing list qgis-develo...@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-developer -- --- .~. / v \ //\\ /( )\ ^`~'^ ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] [Qgis-developer] SEXTANTE adaptation to new SAGA version
Does anyone know if there's a ppa for Linux Ubuntu 12.04 available with SAGA GIS 2.10? On Sat, Jul 6, 2013 at 3:22 PM, samuelm...@gmail.com samuelm...@gmail.comwrote: Thanks Victor for the great work with SEXTANTE. In Arch Linux distribution is available the SAGA GIS v2.1.0 update to be installed from AUR repositories . https://aur.archlinux.org/packages/saga-gis/ Thanks, Samuel Mesa. 2013/7/4 Victor Olaya vola...@gmail.com Hi all SAGA 2.1.0 has just been released. The current version of SEXTANTE in master has been now adapted to work with SAGA 2.1.0, and raster algorithms will not work with any other version. Please, update your SAGA executables if using the latest master version, since now 2.1.0 is the target version. The only algorithm adapted so far is the raster export one, which, for SEXTANTE, was the most important one that had been modified, since it blocks all other raster algorithms. Other algorithms might have changed, but they are not adapted yet. If you find something that was working before and now it doesn't, please report. Also, if there are new algorithms, feel free to suggest them to be added to SEXTANTE as well, describing their syntax, if possible, to help us do it. Windows users, please notice that the Osgeo4W installer still ships with SAGA 2.0.8, so you will need to install SAGA 2.1.0 manually and change the SAGA path in SEXTANTE. This will be updated soon, so it's just a temporary issue Thanks for your help Victor ___ Qgis-developer mailing list qgis-develo...@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-developer -- --- .~. / v \ //\\ /( )\ ^`~'^ ___ Qgis-developer mailing list qgis-develo...@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-developer ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] No data in attribute table using GPS module on PC tablet
I'm using QGIS GPS module on PC tablet (MOTION COMPUTING F5t) under Windows 7. It works fine ! But I don't get any attribute data in attribute table. I didn't find any ticket on that point in QGIS wiki. Thanks by advance for any answer or idea. Christophe TUFFERY Ingénieur de recherche Chargé de l'acquisition des données archéologiques descriptives Direction Scientifique et Technique Service Méthodes et Qualité Inrap - 7 rue de Madrid - CS 50008 - 75008 PARIS Til.: 01-40-08-81-03 www.inrap.fr http://www.inrap.fr/ ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] QGIS installation problem with Mac OSX 10.8.4 and some Qt4 Modules
yeah, there was an old sipconfig.pyc in /usr/local/lib/python2.7/site-packages/ (the results of your instructions see below). After deleting sipconfig.pyc, the python configuration passed, but then i got stacked while make -j 8. The following failures appeared: g++ -c -pipe -fPIC -O2 -Wall -W -DNDEBUG -DSIP_PROTECTED_IS_PUBLIC -Dprotected=public -DQT_NO_DEBUG -DQT_CORE_LIB -I. -I/Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/qpy/QtCore -I/usr/local/include -I/System/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7 -I/mkspecs/macx-g++ -I/Library/Frameworks/QtCore.framework/Headers -I/usr/include -F/Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/qpy/QtCore -F/Library/Frameworks -o sipQtCoreQXmlStreamNamespaceDeclaration.o sipQtCoreQXmlStreamNamespaceDeclaration.cpp /Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/QtCore/sipQtCoreQPyNullVariant_5.cpp:301: error: too many initializers for ‘sipClassTypeDef’ make[1]: *** [sipQtCoreQPyNullVariant_5.o] Error 1 make[1]: *** Waiting for unfinished jobs /Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/QtCore/sipQtCoreQXmlStreamReader.cpp:1856: error: too many initializers for ‘sipClassTypeDef’ /Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/QtCore/sipQtCoreQXmlStreamWriter.cpp:1198: error: too many initializers for ‘sipClassTypeDef’ /Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/QtCore/sipQtCoreQXmlStreamEntityResolver.cpp:282: error: too many initializers for ‘sipClassTypeDef’ make[1]: *** [sipQtCoreQXmlStreamReader.o] Error 1 make[1]: *** [sipQtCoreQXmlStreamWriter.o] Error 1 make[1]: *** [sipQtCoreQXmlStreamEntityResolver.o] Error 1 /Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/QtCore/sipQtCoreQXmlStreamEntityDeclaration.cpp:409: error: too many initializers for ‘sipClassTypeDef’ /Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/QtCore/sipQtCoreQXmlStreamNotationDeclaration.cpp:349: error: too many initializers for ‘sipClassTypeDef’ make[1]: *** [sipQtCoreQXmlStreamEntityDeclaration.o] Error 1 /Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/QtCore/sipQtCoreQXmlStreamNamespaceDeclaration.cpp:341: error: too many initializers for ‘sipClassTypeDef’ make[1]: *** [sipQtCoreQXmlStreamNotationDeclaration.o] Error 1 make[1]: *** [sipQtCoreQXmlStreamNamespaceDeclaration.o] Error 1 make: *** [all] Error 2 Am 06.07.2013 um 17:16 schrieb William Kyngesburye wokl...@kyngchaos.com: yeah, something for the old sip was not deleted... try this: start python2.7, then: import sipconfig sipconfig.__file__ Marcels-iMac:PyQt-mac-gpl-4.10.2 Marcello$ python Python 2.7.2 (default, Oct 11 2012, 20:14:37) [GCC 4.2.1 Compatible Apple Clang 4.0 (tags/Apple/clang-418.0.60)] on darwin Type help, copyright, credits or license for more information. import sipconfig sipconfig.__file__ '/usr/local/lib/python2.7/site-packages/sipconfig.pyc' This should tell you where pyqt configure is finding sip. You can also get the details of that sipconfig: from sipconfig import _pkg_config _pkg_config from sipconfig import _pkg_config _pkg_config {'default_mod_dir': '/Library/Python/2.7/site-packages', 'default_bin_dir': '/System/Library/Frameworks/Python.framework/Versions/2.7/bin', 'platform': 'macx-g++', 'sip_version_str': '4.14.6', 'universal': '', 'sip_version': 265734, 'sip_config_args': '--destdir=/usr/local/Cellar/sip/4.14.6/lib/python2.7/site-packages --bindir=/usr/local/Cellar/sip/4.14.6/bin --incdir=/usr/local/Cellar/sip/4.14.6/include --sipdir=/usr/local/share/sip', 'default_sip_dir': '/usr/local/share/sip', 'sip_mod_dir': '/usr/local/Cellar/sip/4.14.6/lib/python2.7/site-packages', 'sip_bin': '/usr/local/Cellar/sip/4.14.6/bin/sip', 'sip_inc_dir': '/usr/local/Cellar/sip/4.14.6/include', 'py_conf_inc_dir': '/System/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7', 'deployment_target': '', 'py_lib_dir': '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/config', 'arch': '', 'py_version': 132866, 'py_inc_dir': '/System/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7'} On Jul 6, 2013, at 3:16 AM, Marcel Stadelmann wrote: Hello, I removed everything from homebrew which could cause problems for a QGIS installation. I just left bison and expat in homebrew, for sqlite I was not sure if I can leave it (see below the brew list). Then I installed the required components according the install instruction, Qt 4.8.5, your frameworks (gdal complete) and postgres+postgis extension, spatialindex 1.8.1and sip 4.14.7. I got stacked installing PyQt 4.10.2. This program looks for sip 4.14.6 which is the old (previous) installation (see below). My interpretation is that the sip 4.14.7 installation was not good, although there was no error message. Any idea? Thank you Marcel Marcels-iMac:PyQt-mac-gpl-4.10.2 Marcello$ python2.7 configure.py -d /Library/Python/2.7/site-packages -b /usr/local/bin -n /usr/local/Qt4.8/qsci -v /usr/local/share/sip/PyQt4
Re: [Qgis-user] QGIS installation problem with Mac OSX 10.8.4 and some Qt4 Modules
make sure to delete the corresponding /usr/local/lib/python2.7/site-packages/sipconfig.py file, just to make sure. And any other sip and pyqt files and folders left there. Also, try compiling without the -j 8 flag (it will take a lot longer to compile), sometimes too much parallel compilation can confuse make. Or use a smaller number for -j. If you still get the pyqt compile error, it's beyond me, might want to try the pyqt mailing list. On Jul 6, 2013, at 11:07 AM, Marcel Stadelmann wrote: yeah, there was an old sipconfig.pyc in /usr/local/lib/python2.7/site-packages/ (the results of your instructions see below). After deleting sipconfig.pyc, the python configuration passed, but then i got stacked while make -j 8. The following failures appeared: g++ -c -pipe -fPIC -O2 -Wall -W -DNDEBUG -DSIP_PROTECTED_IS_PUBLIC -Dprotected=public -DQT_NO_DEBUG -DQT_CORE_LIB -I. -I/Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/qpy/QtCore -I/usr/local/include -I/System/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7 -I/mkspecs/macx-g++ -I/Library/Frameworks/QtCore.framework/Headers -I/usr/include -F/Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/qpy/QtCore -F/Library/Frameworks -o sipQtCoreQXmlStreamNamespaceDeclaration.o sipQtCoreQXmlStreamNamespaceDeclaration.cpp /Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/QtCore/sipQtCoreQPyNullVariant_5.cpp:301: error: too many initializers for ‘sipClassTypeDef’ make[1]: *** [sipQtCoreQPyNullVariant_5.o] Error 1 make[1]: *** Waiting for unfinished jobs /Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/QtCore/sipQtCoreQXmlStreamReader.cpp:1856: error: too many initializers for ‘sipClassTypeDef’ /Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/QtCore/sipQtCoreQXmlStreamWriter.cpp:1198: error: too many initializers for ‘sipClassTypeDef’ /Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/QtCore/sipQtCoreQXmlStreamEntityResolver.cpp:282: error: too many initializers for ‘sipClassTypeDef’ make[1]: *** [sipQtCoreQXmlStreamReader.o] Error 1 make[1]: *** [sipQtCoreQXmlStreamWriter.o] Error 1 make[1]: *** [sipQtCoreQXmlStreamEntityResolver.o] Error 1 /Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/QtCore/sipQtCoreQXmlStreamEntityDeclaration.cpp:409: error: too many initializers for ‘sipClassTypeDef’ /Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/QtCore/sipQtCoreQXmlStreamNotationDeclaration.cpp:349: error: too many initializers for ‘sipClassTypeDef’ make[1]: *** [sipQtCoreQXmlStreamEntityDeclaration.o] Error 1 /Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/QtCore/sipQtCoreQXmlStreamNamespaceDeclaration.cpp:341: error: too many initializers for ‘sipClassTypeDef’ make[1]: *** [sipQtCoreQXmlStreamNotationDeclaration.o] Error 1 make[1]: *** [sipQtCoreQXmlStreamNamespaceDeclaration.o] Error 1 make: *** [all] Error 2 Am 06.07.2013 um 17:16 schrieb William Kyngesburye wokl...@kyngchaos.com: yeah, something for the old sip was not deleted... try this: start python2.7, then: import sipconfig sipconfig.__file__ Marcels-iMac:PyQt-mac-gpl-4.10.2 Marcello$ python Python 2.7.2 (default, Oct 11 2012, 20:14:37) [GCC 4.2.1 Compatible Apple Clang 4.0 (tags/Apple/clang-418.0.60)] on darwin Type help, copyright, credits or license for more information. import sipconfig sipconfig.__file__ '/usr/local/lib/python2.7/site-packages/sipconfig.pyc' This should tell you where pyqt configure is finding sip. You can also get the details of that sipconfig: from sipconfig import _pkg_config _pkg_config from sipconfig import _pkg_config _pkg_config {'default_mod_dir': '/Library/Python/2.7/site-packages', 'default_bin_dir': '/System/Library/Frameworks/Python.framework/Versions/2.7/bin', 'platform': 'macx-g++', 'sip_version_str': '4.14.6', 'universal': '', 'sip_version': 265734, 'sip_config_args': '--destdir=/usr/local/Cellar/sip/4.14.6/lib/python2.7/site-packages --bindir=/usr/local/Cellar/sip/4.14.6/bin --incdir=/usr/local/Cellar/sip/4.14.6/include --sipdir=/usr/local/share/sip', 'default_sip_dir': '/usr/local/share/sip', 'sip_mod_dir': '/usr/local/Cellar/sip/4.14.6/lib/python2.7/site-packages', 'sip_bin': '/usr/local/Cellar/sip/4.14.6/bin/sip', 'sip_inc_dir': '/usr/local/Cellar/sip/4.14.6/include', 'py_conf_inc_dir': '/System/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7', 'deployment_target': '', 'py_lib_dir': '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/config', 'arch': '', 'py_version': 132866, 'py_inc_dir': '/System/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7'} - William Kyngesburye kyngchaos*at*kyngchaos*dot*com http://www.kyngchaos.com/ History is an illusion caused by the passage of time, and time is an illusion caused by the passage of history. - Hitchhiker's Guide to the Galaxy ___ Qgis-user mailing list Qgis-user@lists.osgeo.org
Re: [Qgis-user] QGIS installation problem with Mac OSX 10.8.4 and some Qt4 Modules
I use Xcode 4.6.3 Cmake QGIS didn't work. First GDAL was not found. After including -D GDAL_CONFIG=/Library/Frameworks/GDAL.framework/Versions/1.10/unix/bin/gdal-config it was found, but other errors occurred (see below). What could it be? Marcels-iMac:build Marcello$ cmake -D CMAKE_INSTALL_PREFIX=~/Applications \ -D CMAKE_BUILD_TYPE=MINSIZEREL -D ENABLE_TESTS=FALSE \ -D WITH_INTERNAL_SPATIALITE=FALSE -D WITH_PYSPATIALITE=FALSE \ -D SPATIALINDEX_LIBRARY=/usr/local/lib/libspatialindex.dylib \ -D SPATIALINDEX_INCLUDE_DIR=/usr/local/include/spatialindex \ -D QWT_LIBRARY=/usr/local/qwt-6.0.2/lib/libqwt.dylib \ -D QWT_INCLUDE_DIR=/usr/local/qwt-6.0.2/include \ -D BISON_EXECUTABLE=/usr/local/bin/bison \ -D GDAL_CONFIG=/Library/Frameworks/GDAL.framework/Versions/1.10/unix/bin/gdal-config \ .. -- QGIS version: 1.9.0 Master (10900) -- Found GRASS: /Applications/GRASS-6.4.app/Contents/MacOS (6.4.2) -- Found Proj: /usr/local/lib/libproj.dylib -- Found GEOS: /usr/local/Cellar/geos/3.3.8/lib/libgeos_c.dylib -- Found GDAL: /Library/Frameworks/GDAL.framework/Versions/1.10/unix/lib/libgdal.dylib (1.10.0) -- Found Expat: /usr/local/lib/libexpat.dylib -- Found Spatialindex: /usr/local/lib/libspatialindex.dylib -- Found Qwt: /usr/local/qwt-6.0.2/lib/libqwt.dylib (6.0.2) -- Found Sqlite3: /usr/lib/libsqlite3.dylib -- Found PostgreSQL: /usr/local/pgsql-9.2/lib/libpq.dylib -- Touch support disabled -- Found QScintilla2: /usr/local/lib/libqscintilla2.dylib (2.7.2) -- Pedantic compiler settings enabled -- Found Python executable: /usr/bin/python -- Found Python version: 2.7.2 -- Found Python library: -framework Python -- Found SIP version: 4.14.6 -- Found PyQt4 version: 4.10.2 -- Found QScintilla2 PyQt4 module: 2.7.2 fatal: Not a git repository (or any of the parent directories): .git fatal: Not a git repository (or any of the parent directories): .git -- Found GSL: -L/usr/local/Cellar/gsl/1.15/lib -lgsl -lgslcblas -- txt2tags not found - disabled CMake Error: The following variables are used in this project, but they are set to NOTFOUND. Please set them or make sure they are set and tested correctly in the CMake files: SPATIALITE_LIBRARY linked by target qgis_core in directory /Users/Marcello/Downloads/Quantum-GIS-master/src/core linked by target offlineeditingplugin in directory /Users/Marcello/Downloads/Quantum-GIS-master/src/plugins/offline_editing -- Configuring incomplete, errors occurred! Am 06.07.2013 um 18:54 schrieb William Kyngesburye wokl...@kyngchaos.com: Could be a small problem with SIP 4.14.7 and Mt Lion (sorry, I'm on Lion, but it's annoying that a minor update is sensitive to system version). If 4.14.6 works, that's OK, but good to know for updating the INSTALL doc. What version of Xcode do you have? Marcels-iMac:build Marcello$ xcodebuild -version Xcode 4.6.3 Build version 4H1503 On Jul 6, 2013, at 11:46 AM, Marcel Stadelmann wrote: there was a PyQt4 folder, which I deleted, but it didn' help. Also compiling without -j 8 did not help. I tried now with sip-4.14.6 and it worked. I could successfully install PyQt 4.10.2. I will later continue the QGIS installation. Thank you very much for your help. Marcel Am 06.07.2013 um 18:15 schrieb William Kyngesburye wokl...@kyngchaos.com: make sure to delete the corresponding /usr/local/lib/python2.7/site-packages/sipconfig.py file, just to make sure. And any other sip and pyqt files and folders left there. Also, try compiling without the -j 8 flag (it will take a lot longer to compile), sometimes too much parallel compilation can confuse make. Or use a smaller number for -j. If you still get the pyqt compile error, it's beyond me, might want to try the pyqt mailing list. On Jul 6, 2013, at 11:07 AM, Marcel Stadelmann wrote: yeah, there was an old sipconfig.pyc in /usr/local/lib/python2.7/site-packages/ (the results of your instructions see below). After deleting sipconfig.pyc, the python configuration passed, but then i got stacked while make -j 8. The following failures appeared: g++ -c -pipe -fPIC -O2 -Wall -W -DNDEBUG -DSIP_PROTECTED_IS_PUBLIC -Dprotected=public -DQT_NO_DEBUG -DQT_CORE_LIB -I. -I/Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/qpy/QtCore -I/usr/local/include -I/System/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7 -I/mkspecs/macx-g++ -I/Library/Frameworks/QtCore.framework/Headers -I/usr/include -F/Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/qpy/QtCore -F/Library/Frameworks -o sipQtCoreQXmlStreamNamespaceDeclaration.o sipQtCoreQXmlStreamNamespaceDeclaration.cpp /Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/QtCore/sipQtCoreQPyNullVariant_5.cpp:301: error: too many initializers for ‘sipClassTypeDef’ make[1]: *** [sipQtCoreQPyNullVariant_5.o] Error 1 make[1]: *** Waiting for unfinished jobs /Users/Marcello/Downloads/PyQt-mac-gpl-4.10.2/QtCore/sipQtCoreQXmlStreamReader.cpp:1856: error: too many
Re: [Qgis-user] QGIS installation problem with Mac OSX 10.8.4 and some Qt4 Modules
This is very strange, cmake should be finding all the frameworks (GEOS, PROJ, SQLite/Spatialite) and not other libraries. You have to explicitly set a cmake variable so it doesn't prefer frameworks over libraries. Maybe cmake is misbehaving - what is your cmake version? On Jul 6, 2013, at 5:33 PM, Marcel Stadelmann wrote: I use Xcode 4.6.3 Cmake QGIS didn't work. First GDAL was not found. After including -D GDAL_CONFIG=/Library/Frameworks/GDAL.framework/Versions/1.10/unix/bin/gdal-config it was found, but other errors occurred (see below). What could it be? Marcels-iMac:build Marcello$ cmake -D CMAKE_INSTALL_PREFIX=~/Applications \ -D CMAKE_BUILD_TYPE=MINSIZEREL -D ENABLE_TESTS=FALSE \ -D WITH_INTERNAL_SPATIALITE=FALSE -D WITH_PYSPATIALITE=FALSE \ -D SPATIALINDEX_LIBRARY=/usr/local/lib/libspatialindex.dylib \ -D SPATIALINDEX_INCLUDE_DIR=/usr/local/include/spatialindex \ -D QWT_LIBRARY=/usr/local/qwt-6.0.2/lib/libqwt.dylib \ -D QWT_INCLUDE_DIR=/usr/local/qwt-6.0.2/include \ -D BISON_EXECUTABLE=/usr/local/bin/bison \ -D GDAL_CONFIG=/Library/Frameworks/GDAL.framework/Versions/1.10/unix/bin/gdal-config \ .. -- QGIS version: 1.9.0 Master (10900) -- Found GRASS: /Applications/GRASS-6.4.app/Contents/MacOS (6.4.2) -- Found Proj: /usr/local/lib/libproj.dylib -- Found GEOS: /usr/local/Cellar/geos/3.3.8/lib/libgeos_c.dylib -- Found GDAL: /Library/Frameworks/GDAL.framework/Versions/1.10/unix/lib/libgdal.dylib (1.10.0) -- Found Expat: /usr/local/lib/libexpat.dylib -- Found Spatialindex: /usr/local/lib/libspatialindex.dylib -- Found Qwt: /usr/local/qwt-6.0.2/lib/libqwt.dylib (6.0.2) -- Found Sqlite3: /usr/lib/libsqlite3.dylib -- Found PostgreSQL: /usr/local/pgsql-9.2/lib/libpq.dylib -- Touch support disabled -- Found QScintilla2: /usr/local/lib/libqscintilla2.dylib (2.7.2) -- Pedantic compiler settings enabled -- Found Python executable: /usr/bin/python -- Found Python version: 2.7.2 -- Found Python library: -framework Python -- Found SIP version: 4.14.6 -- Found PyQt4 version: 4.10.2 -- Found QScintilla2 PyQt4 module: 2.7.2 fatal: Not a git repository (or any of the parent directories): .git fatal: Not a git repository (or any of the parent directories): .git -- Found GSL: -L/usr/local/Cellar/gsl/1.15/lib -lgsl -lgslcblas -- txt2tags not found - disabled CMake Error: The following variables are used in this project, but they are set to NOTFOUND. Please set them or make sure they are set and tested correctly in the CMake files: SPATIALITE_LIBRARY linked by target qgis_core in directory /Users/Marcello/Downloads/Quantum-GIS-master/src/core linked by target offlineeditingplugin in directory /Users/Marcello/Downloads/Quantum-GIS-master/src/plugins/offline_editing -- Configuring incomplete, errors occurred! - William Kyngesburye kyngchaos*at*kyngchaos*dot*com http://www.kyngchaos.com/ The equator is so long, it could encircle the earth completely once. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] QGIS installation problem with Mac OSX 10.8.4 and some Qt4 Modules
Current stable was 2.8.11 (what I have) until a few days ago. 2.8.11.2 was released Jul 3. I don't see any changes in the latest release or in master that might cause this behavior. 2.8.11.2 still works for me, but I don't have anything in /usr/local that would confuse it. On Jul 6, 2013, at 6:00 PM, Marcel Stadelmann wrote: Am 07.07.2013 um 00:53 schrieb William Kyngesburye wokl...@kyngchaos.com: This is very strange, cmake should be finding all the frameworks (GEOS, PROJ, SQLite/Spatialite) and not other libraries. You have to explicitly set a cmake variable so it doesn't prefer frameworks over libraries. Maybe cmake is misbehaving - what is your cmake version? where can I check the cmake version? I downloaded the master branch just a few hours ago. On Jul 6, 2013, at 5:33 PM, Marcel Stadelmann wrote: I use Xcode 4.6.3 Cmake QGIS didn't work. First GDAL was not found. After including -D GDAL_CONFIG=/Library/Frameworks/GDAL.framework/Versions/1.10/unix/bin/gdal-config it was found, but other errors occurred (see below). What could it be? Marcels-iMac:build Marcello$ cmake -D CMAKE_INSTALL_PREFIX=~/Applications \ -D CMAKE_BUILD_TYPE=MINSIZEREL -D ENABLE_TESTS=FALSE \ -D WITH_INTERNAL_SPATIALITE=FALSE -D WITH_PYSPATIALITE=FALSE \ -D SPATIALINDEX_LIBRARY=/usr/local/lib/libspatialindex.dylib \ -D SPATIALINDEX_INCLUDE_DIR=/usr/local/include/spatialindex \ -D QWT_LIBRARY=/usr/local/qwt-6.0.2/lib/libqwt.dylib \ -D QWT_INCLUDE_DIR=/usr/local/qwt-6.0.2/include \ -D BISON_EXECUTABLE=/usr/local/bin/bison \ -D GDAL_CONFIG=/Library/Frameworks/GDAL.framework/Versions/1.10/unix/bin/gdal-config \ .. -- QGIS version: 1.9.0 Master (10900) -- Found GRASS: /Applications/GRASS-6.4.app/Contents/MacOS (6.4.2) -- Found Proj: /usr/local/lib/libproj.dylib -- Found GEOS: /usr/local/Cellar/geos/3.3.8/lib/libgeos_c.dylib -- Found GDAL: /Library/Frameworks/GDAL.framework/Versions/1.10/unix/lib/libgdal.dylib (1.10.0) -- Found Expat: /usr/local/lib/libexpat.dylib -- Found Spatialindex: /usr/local/lib/libspatialindex.dylib -- Found Qwt: /usr/local/qwt-6.0.2/lib/libqwt.dylib (6.0.2) -- Found Sqlite3: /usr/lib/libsqlite3.dylib -- Found PostgreSQL: /usr/local/pgsql-9.2/lib/libpq.dylib -- Touch support disabled -- Found QScintilla2: /usr/local/lib/libqscintilla2.dylib (2.7.2) -- Pedantic compiler settings enabled -- Found Python executable: /usr/bin/python -- Found Python version: 2.7.2 -- Found Python library: -framework Python -- Found SIP version: 4.14.6 -- Found PyQt4 version: 4.10.2 -- Found QScintilla2 PyQt4 module: 2.7.2 fatal: Not a git repository (or any of the parent directories): .git fatal: Not a git repository (or any of the parent directories): .git -- Found GSL: -L/usr/local/Cellar/gsl/1.15/lib -lgsl -lgslcblas -- txt2tags not found - disabled CMake Error: The following variables are used in this project, but they are set to NOTFOUND. Please set them or make sure they are set and tested correctly in the CMake files: SPATIALITE_LIBRARY linked by target qgis_core in directory /Users/Marcello/Downloads/Quantum-GIS-master/src/core linked by target offlineeditingplugin in directory /Users/Marcello/Downloads/Quantum-GIS-master/src/plugins/offline_editing -- Configuring incomplete, errors occurred! - William Kyngesburye kyngchaos*at*kyngchaos*dot*com http://www.kyngchaos.com/ Earth: Mostly harmless - revised entry in the HitchHiker's Guide to the Galaxy ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user