On 23/01/2014 11:20, Rich Mellor wrote:
I have 3 replacement rollers left in stock
See
http://www.sellmyretro.com/offer/details/Replacement-Sinclair-QL-~~-ZX-Microdrive-Rollers-2630
I have also been speaking with Louis Siedelmann who got these made about
making some more
Rich
I am looking at laser-cutting some felt pads - it's highly accurate... If I
have the dimensions of the rollers, I can also make some.
On Fri, Jan 24, 2014 at 1:54 PM, Stephen Usher st...@lingula.org.uk wrote:
On 23/01/2014 11:20, Rich Mellor wrote:
I have 3 replacement rollers left in stock
On 24/01/2014 19:54, Stephen Usher wrote:
Still, at least the MICE ROM and mouse still works fine, as you can see...
Or you would have if the list had not stripped the attachment.
But you can see here:
http://www.lingula.org.uk/~steve/images/QL-mice.jpg
Steve
Steve,
If you need some cartridges to use as part of the display - let me know and I
can let you have some of my better ones - I have a few which seem to be in good
condition - although not sure how long they will last. One suggestion is to
apply glue to the felt pad before it splits - has
On 24/01/2014 20:07, Rich Mellor (RWAP) wrote:
Steve,
If you need some cartridges to use as part of the display - let me know and I
can let you have some of my better ones - I have a few which seem to be in good
condition - although not sure how long they will last. One suggestion is to
apply
I just measured on an unopened cartridge (until now) and the pad is 4mm
long, 3mm deep, and 1.5mm high.
The microdrive capstan is 5.0 mm high, 6.0 mm diameter, with a 1.75mm hole,
on Samsung built microdrives.
Dave
On Fri, Jan 24, 2014 at 2:19 PM, Stephen Usher st...@lingula.org.uk wrote:
On
As an FYI, I have obtained from 3M some of the correct material for audio
felt pads, of the type they supplied to BASF and TDK. It even has their
adhesive backing :) I'll laser cut it into 4x3mm pieces and mail 10 out to
anyone who wants them for $2, £3, €3.60...
I'll post payment details in a
