I have made a little circuit board with a Lithaium battery holder that
will fit in place of the old SGC battery.
The curcuit board is made from Verobaord, so look a little rough, I am
looking into making a proper PCB, sine there is only 2 tacks and 6 pads,
it should be quite easy. Maube a DIY
Hi Derek,
That would be a good idea to get it made as a proper PCB - many of the
batteries are now reaching the end of their shelf life
Rich
Derek Stewart wrote:
I have made a little circuit board with a Lithaium battery holder that
will fit in place of the old SGC battery.
The curcuit
Dear John,
I replaced two batteries both on a GC and a SGC of a friend of mine thanks
to a standard CR2032 3V lithium battery which the Italian QL hardware expert
Romaldo Parodi, was able to get with presoldered pins on it. Then it was
quite easy to solder a small additional wire to reach the two
