Paul Holmgren wrote:
> I found a 9 pin to 9 pin cable, I think I need to locate a 9pin to 25pin
> to use PC-Link???
>
>
I just dug mine out and the cable that came with mine is a 9 to 25 pin.
I have a 25-9 adapter on mine and I recall using it on a PC with 9
pin ports. I can ohm out my cable
Paul Holmgren wrote:
> I just dug out one of my Z88's, and discovered that I have part of the
> PC-link hardware/software.
>
> IF I recall rightly, I need some software to load into a PC??
>
> Have the cable and the Z88 Eprom, still rooting around for the docs,
> (its been too many years)
>
> If
I found a 9 pin to 9 pin cable, I think I need to locate a 9pin to 25pin to use
PC-Link???
--
Paul Holmgren
Hers: http://in09.endcancer.org/goto/Cindy.Holmgren
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
I just dug out one of my Z88's, and discovered that I have part of the PC-link
hardware/software.
IF I recall rightly, I need some software to load into a PC??
Have the cable and the Z88 Eprom, still rooting around for the docs, (its been
too many years)
If I should fail to locate the PC sof
I used to use mine a mdv3_ on my QL..Not very useful when I had twin
3.5 drives, I just did it because I could!
Regards
Andy Barber,
Absolutely, it was all part of the pioneering spirit in those days!
I vaguely remember that when I tried my Spectrum microdrives with a QL
they ended up facing
I used to use mine a mdv3_ on my QL..Not very useful when I had twin 3.5
drives, I just did it because I could!
Regards
Andy Barber,
24 Milk Street, Sundridge, BROMLEY, BR1 5AD, UK.
LL +44 20 8402 3385 ~ M +44 791 883 4739
From: Rich Mellor
To: ql-us...@q-v-
