Re: [Ql-Users] German Minerva ROM
Derek, Id be very interested in your old all 03a if you would part with it... Enviado do meu Tele-Movel On Mar 6, 2017 10:20 AM, "Derek Stewart" wrote: > On 06/03/17 12:49, Marcel Kilgus wrote: > >> Hi all, >> >> I create a German version of the Minerva ROM, in case anybody is >> interested: >> >> https://www.kilgus.net/2017/03/05/german-minerva-rom/ >> >> I also briefly discuss a cheap EEPROM programmer that I ordered from >> China. Suffice to say, I'm very satisfied. >> >> Cheers, Marcel >> >> ___ >> QL-Users Mailing List >> >> Hi Marcel, > > I have had a Minipro TL866CS for a long time and works very well. > > It does have problems with very old eproms, not being in the Eprom > Programmer Database. > > But something like a Winbond W26C512 EEPROM, works very nicely. > > I might be retiring my Hilo Systems ALL03A MSDOS based programmer in the > future. > > -- > Regards, > > > Derek > ___ > QL-Users Mailing List > ___ QL-Users Mailing List
Re: [Ql-Users] German Minerva ROM
Ralf Reköndt wrote: > Ah, a good idea. I have elsewhere on disk a Minerva (not the latest version) > which was patched by Martin Berndt with german key layout (not so > important), with b/w colours of #1 and #2 (also not so important) but with > autostart at F1, not F2 (a bit more important). Ah right, that is annoying, too. I haven't tried it yet, but looking at the source there is a byte at address $042F in the ROM. Currently it's $08 and the meaning is documented in the source: * bit(s) value meaning * 0 0 do the full memory test * 1 skip the memory test for a quick reset * 1 0 scan rom slots * 1 skip the rom slots, unexpand the m/c * 2 0 normal establishment of memory size * 1 take the upper memory limit below as gospel! * 3 0 monitor mode * 1 tv mode * 4 0 wait for f1-f4 selection * 1 skip the f1-f4 selection * 5-6 0..3extend supervisor stack by 0K, 8K, 16K or 24K * 7 0 set single screen * 1 set dual screens * 8-130..63 extra blocks of 64k between last screen and system vars * 14-31 upper limit on memory (0 = no limit) * (Note that the top bits of d1 are unlikely to ever make sense as memory!) One could for example patch a $11 into it to get - skip memory test - monitor mode - no wait for F1/F2 (actually there will still be a tiny wait of 32ms, so keys can still be pressed) Use any hex editor to change. Marcel ___ QL-Users Mailing List
Re: [Ql-Users] German Minerva ROM
Ah, a good idea. I have elsewhere on disk a Minerva (not the latest version) which was patched by Martin Berndt with german key layout (not so important), with b/w colours of #1 and #2 (also not so important) but with autostart at F1, not F2 (a bit more important). Cheers...Ralf - Original Message - From: "Marcel Kilgus" Hi all, I create a German version of the Minerva ROM, in case anybody is interested: https://www.kilgus.net/2017/03/05/german-minerva-rom/ I also briefly discuss a cheap EEPROM programmer that I ordered from China. Suffice to say, I'm very satisfied. Cheers, Marcel ___ QL-Users Mailing List
Re: [Ql-Users] German Minerva ROM
I'm rather fond of the AtTiny85 myself, I have to admit. :-) Cheers, Norm. On 6 March 2017 13:26:59 GMT+00:00, Marcel Kilgus wrote: >Derek Stewart wrote: >> I have had a Minipro TL866CS for a long time and works very well. >> >> It does have problems with very old eproms, not being in the Eprom >> Programmer Database. > >Yes, I had to disable the "ID check" flag to read one of my old EPROMS >and haven't tried to burn one yet. Might try this evening just for >fun, but a 10-pack of EEPROMs is somewhere on its way between here and >China, so I probably don't need those going forward anyway ;-) > >Read out the some GAL16V8s and burned some ATTINY chips so far, all >worked flawlessly. So far I'm a really happy camper with this thing. > >Cheers, Marcel > >___ >QL-Users Mailing List -- Sent from my Android device with K-9 Mail. Please excuse my brevity. ___ QL-Users Mailing List
Re: [Ql-Users] German Minerva ROM
Derek Stewart wrote: > I have had a Minipro TL866CS for a long time and works very well. > > It does have problems with very old eproms, not being in the Eprom > Programmer Database. Yes, I had to disable the "ID check" flag to read one of my old EPROMS and haven't tried to burn one yet. Might try this evening just for fun, but a 10-pack of EEPROMs is somewhere on its way between here and China, so I probably don't need those going forward anyway ;-) Read out the some GAL16V8s and burned some ATTINY chips so far, all worked flawlessly. So far I'm a really happy camper with this thing. Cheers, Marcel ___ QL-Users Mailing List
Re: [Ql-Users] German Minerva ROM
On 06/03/17 12:49, Marcel Kilgus wrote: Hi all, I create a German version of the Minerva ROM, in case anybody is interested: https://www.kilgus.net/2017/03/05/german-minerva-rom/ I also briefly discuss a cheap EEPROM programmer that I ordered from China. Suffice to say, I'm very satisfied. Cheers, Marcel ___ QL-Users Mailing List Hi Marcel, I have had a Minipro TL866CS for a long time and works very well. It does have problems with very old eproms, not being in the Eprom Programmer Database. But something like a Winbond W26C512 EEPROM, works very nicely. I might be retiring my Hilo Systems ALL03A MSDOS based programmer in the future. -- Regards, Derek ___ QL-Users Mailing List
Re: [Ql-Users] German Minerva ROM
Hi Marcel, > I create a German version of the Minerva ROM, in case anybody is > interested: > > https://www.kilgus.net/2017/03/05/german-minerva-rom/ Thanks! Very good idea! Peter ___ QL-Users Mailing List
Re: [Ql-Users] German Minerva ROM
On Mon, 6 Mar 2017, at 12:49 PM, Marcel Kilgus wrote: > Hi all, > > I create a German version of the Minerva ROM, in case anybody is > interested: > > https://www.kilgus.net/2017/03/05/german-minerva-rom/ > > I also briefly discuss a cheap EEPROM programmer that I ordered from > China. Suffice to say, I'm very satisfied. > > Cheers, Marcel > Nice, using in German might force me to improve my knowledge :-) Graeme ___ QL-Users Mailing List
Re: [Ql-Users] QL/E v3.16 (Codename "Snow white swan", Edition 1702) is out now!
Urs Koenig (QL) wrote: > More info and download here: > http://sinclairql.net/repository.html#QLE Good job, thanks. It just seems to contain so much software that I can only briefly test a small part of it :-o Marcel ___ QL-Users Mailing List
[Ql-Users] German Minerva ROM
Hi all, I create a German version of the Minerva ROM, in case anybody is interested: https://www.kilgus.net/2017/03/05/german-minerva-rom/ I also briefly discuss a cheap EEPROM programmer that I ordered from China. Suffice to say, I'm very satisfied. Cheers, Marcel ___ QL-Users Mailing List
Re: [Ql-Users] uQLx and TCP/IP stack documentation
On 05/03/17 20:13, Peter Graf wrote: Dilwyn Jones wrote: I've created a new page in the Documents part of my website, dedicated to information about the TCP/IP stack included with emulators such as QPC2, uQLx, SMSQmulator and QemuLator. Thank you. Just for clairifcation: There is no TCP/IP stack included with any of these emulators. They are just mirroring the socket interface of the host computer to the emulated side. Peter ___ QL-Users Mailing List Hi Peter, When you say the TCP/IP socket interface is mirrored in an emulator, is that full range of TCP/IP ports. This would make life easier for porting over existing Internet software. The demonstration of the TCP/IP at the QLis30 in Edinburgh, is the TCP/IP stack the full implementation? -- Regards, Derek ___ QL-Users Mailing List