Dastardly auto-complete got me again!
Dave
On Fri, Jun 15, 2012 at 5:50 PM, Marcel Kilgus ql-us...@mail.kilgus.net wrote:
Dave Park wrote:
(reposted from wrong list address - apologies if dupe)
Don't worry, wasn't a list address but my personal one. Thanks for the
heads-up, pity I don't
On Tue, Jun 19, 2012 at 12:10 PM, Tony Firshman t...@firshman.co.uk wrote:
Lee Privett wrote, on 19/Jun/12 17:56 | Jun19:
This isn't the guy I suppose?
http://soundcloud.com/per-witte
No.
The QL Per has a pony tail, and is never to be seen without a small cigar!
He is on this page:
On Sat, Jun 23, 2012 at 4:43 AM, Tony Firshman t...@firshman.co.uk wrote:
and mine has arrived.
Two problems - no spare SD card and no suitable monitor (8-)#
I am told capacitor C6 (by the power socket) can break off - I will secure
mine with carpenter's hot glue.
The best working
I replied with I'd be glad to arrange help. Please continue the
sequence AH, JM, __, __.
I figure a !one_of_us would be lost at that.
Dave
On Mon, Jun 25, 2012 at 10:22 AM, John Taylor j_taylo...@btinternet.com wrote:
I received copy of the mail from John.
The senders address is John's,
On Mon, Jun 25, 2012 at 12:41 PM, Tony Firshman t...@firshman.co.uk wrote:
Dave Park wrote, on 25/Jun/12 16:38 | Jun25:
I replied with I'd be glad to arrange help. Please continue the
sequence AH, JM, __, __.
I figure a !one_of_us would be lost at that.
Good one. I am not sure even I can
This is a Bulgarian company that has, shall we say, very poor customer
relations?
On Fri, Jun 29, 2012 at 7:54 AM, SIMON BALDERSON
s.balder...@btinternet.com wrote:
Just seen this in Everyday Practical Electronics July issue. It's an
ARM-based product that's fully open source and runs
On Tue, Jul 3, 2012 at 8:15 AM, Tony Firshman t...@firshman.co.uk wrote:
Yes in theory at 700ma plus usb devices, but
http://www.raspberrypi.org/phpBB3/viewtopic.php?f=63t=6050 finds 210ma max.
The GPIO header looks great. Other that power and ground it looks
user-definable. I must see if
I tried writing a game over the past few months - a block pushing
puzzle game - but unfortunately the range of different performing
systems out there, I couldn't assure it would work on all, or on any
original hardware. This was a big problem for me so I shelved it.
I will support this game by
There is one issue to consider: CF cards greater than 64GB are usually
LBA28 which won't work on QubIDE. A few smaller cards also insist on
LBA28 instead of LBA24 and do not fall back to LBA24.
Anything that you're unsure of, maybe google to check if it will run
in a Cobalt Raq 3 or 4, or a
On Wed, Oct 17, 2012 at 1:27 PM, QL-MyLink (f/fh)
q...@mylink.adsl24.co.uk wrote:
Norman said -
This is true, however, a number of the floppies in the drive (some
older, some newer than some of the affected ones) still work and still
have the data. At least, I can read them.
On Sat, Nov 24, 2012 at 5:40 PM, jms1 j...@supanet.com wrote:
On 2012-11-24 11:01, George Gwilt wrote:
On 24 Nov 2012, at 07:38, Wolfgang Lenerz wrote:
his is just to let you know that the SMSQE licence will be changed.
From the SMSQE licence, we will move towards a (new) BSD style
On Sun, Nov 25, 2012 at 7:56 AM, Wolfgang Lenerz w...@scp-paulet-lenerz.com
wrote:
I'm cautiously optimistic.
Dave
__**_
http://en.wikipedia.org/wiki/**BSD_licenseshttp://en.wikipedia.org/wiki/BSD_licenses
It will be like this:
Copyright (c) 1989-2012,
My hope and wish is that everyone has a better 2013 than 2012.
Dave
On Wed, Jan 2, 2013 at 9:32 AM, QL-MyLink (f/fh)
q...@mylink.adsl24.co.ukwrote:
Frank said -
May I be the first to wish the entire QL community a very happy new
year!
Thank you Frank; and may I be the first to thank
On Mon, Jan 14, 2013 at 10:27 AM, extdgl42 externa...@earthlink.net wrote:
Doug LaVerne 37830 USA
BTW, I have an extensive list upcoming of freebies for anyone willing to
pick up, southern USA (e.g. five Black Boxes still in original packing
boxes). No shipping, pickup only; likely someone
I've made plans with Doug and we've worked out a date for me to pick up the
items.
I'm looking forward to it. ROAD TRIP!
Dave
On Wed, Jan 16, 2013 at 6:52 PM, Timothy Swenson swenso...@sbcglobal.netwrote:
On 1/15/2013 11:10 PM, extdgl42 wrote:
Dave gets first dibs.
Like there will be a
No snow here in Austin, TX yet. Expecting a high of 18C or 19C...
Dave
On Fri, Jan 18, 2013 at 7:28 AM, Dilwyn Jones
dil...@evans1511.fsnet.co.ukwrote:
Interesting listening to Jeremy Vine program on radio 2 and the arguments
about
sissy teachers and closed schools and all that (I didn't
What is the state of QL emulation on the Pi, anyway?
I see lots of people playing with it, but no real co-operation or results ;)
Dave
On Fri, Jan 18, 2013 at 9:08 AM, Dilwyn Jones
dil...@evans1511.fsnet.co.ukwrote:
Subject: [Ql-Users] It's not a QL on a Raspberry Pi yet, but .
Just
No answers, but that does sound very prototypey...
Does it boot at all? Is it an Iss. 5 PCB?
On Mon, Jan 28, 2013 at 3:33 PM, paul paulh...@ameritech.net wrote:
Many a moon ago Mr. Koenig started asking me for the pertinent poo
about the PM version QL I still have. I finally got it out and
On Fri, Feb 1, 2013 at 5:47 AM, Bryan Horstmann b...@newlan.org wrote:
Thank you very much Wolfgang. It will take me a little time to get my
head round this, and work out the sequence. To get Xchange to full display
size perhaps I need to change the native laptop screen to a differnt
Hi all,
I made it home safely a little before midnight last night, after 2,661
miles on the road. The trip took four days, averaging 625 milers a day. I
achieved 31.7 mpgs out of a car designed to get 23 mpgs freeway. :)
I have a small haul of goodies. Some will be retained for use, and a couple
The version he downloaded was the latest version at the time he downloaded
it, unless you're deliberately. Oh God!
;)
Dave
On Tue, Feb 12, 2013 at 2:12 PM, Wolfgang Lenerz w...@wlenerz.com wrote:
Le 12/02/2013 21:10, Geoff Wicks a écrit :
I had already noted the site was back up.
I
Hi all,
If Petri Pellinen is still on the list, could they email me privately
please?
I'd very much like to talk to you :)
Dave
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
I believe you guys are in violent agreement.
On Sun, Mar 3, 2013 at 8:55 AM, Ralf Reköndt ralf.rekoe...@t-online.dewrote:
As Syntax Next Medium Pro was designed in 2000, it can't be the font. I
have an original Syntax font, be sure it *is* the font used by Sinclair.
- Original Message
I found this: http://en.wikipedia.org/wiki/Syntax_(typeface)
And this: http://www.fontpalace.com/font-download/Syntax/
Fun times!
Dave
On Sun, Mar 3, 2013 at 9:37 AM, Dave Park plasticu...@gmail.com wrote:
I believe you guys are in violent agreement.
On Sun, Mar 3, 2013 at 8:55 AM, Ralf
On Sun, Mar 3, 2013 at 7:29 PM, paul paulh...@ameritech.net wrote:
On 3/3/2013 3:07 PM,
ql-users-request@lists.q-v-d.**comql-users-requ...@lists.q-v-d.comwrote:
Message: 1
Date: Sun, 3 Mar 2013 10:54:24 -0600
From: Dave Park
plasticu...@gmail.com
To: ql-us...@q-v-d.com Subject
On Mon, Mar 4, 2013 at 9:10 AM, tobias.froesc...@t-online.de
tobias.froesc...@t-online.de wrote:
Separately, does anyone have the datasheets for the MC1377P - I can't find
them anywhere...
Dave
Dave,
anything wrong with this one:
http://www.futurlec.com/Motorola/MC1377P.shtml
Hi all,
Mostly copied over from qlforum.co.uk, so if you read it there, sorry for
the redundancy!
Today I ran a loop on an unexpanded QL in monitor mode (US model, has weird
interrupts) and then with a 68EC020, a GC and a SGC.
100 PRINT DATE$
110 FOR loop = 0 to 10 : NEXT loop
120 PRINT
.
Ian Burkinshaw
- Original Message -
From: Dave Park plasticu...@gmail.com
To: ql-us...@q-v-d.com
Sent: Friday, March 08, 2013 10:20 PM
Subject: [Ql-Users] [QL-Users] Something I have been playing with...
Hi all,
Mostly copied over from qlforum.co.uk, so if you read it there, sorry
with a wire wrapped 68020 in the side.. Should be a blast from the 80's
And yes I would be very interested in seeing your work... regards John A
PSanyone fiddling with the 68881?
--- On Sat, 9/3/13, Dave Park plasticu...@gmail.com wrote:
From: Dave Park plasticu...@gmail.com
Subject: Re
Hi :)
On Sat, Mar 9, 2013 at 1:15 PM, Urs Koenig (QL) q...@bluewin.ch wrote:
Dave wrote:
Meanwhile, I am very interested in the 68020 adapted Thors. Does anyone
on-list have one? Mine's a Thor XVI (with video issues, but that's
another
thread) so it just has a 68000@8MHz, though I am
The Gold Card and Super Gold Card are quite different in this respect.
The custom logic on the GC and SCG that I have are both Altera chips that
max out at 50MHz, which gives a top CPU speed of 25 MHz. However, the SGC
clocks the CPU at 24MHz, probably because that frequency allows faster
memory
:
EP1810LC-20T
A9119
Yellow gold card with just the name Gold Card. Not working.
Will look at my super goldcard eventually.
F.
On 2013-03-10, at 13:53, Dave Park wrote:
Hi everyone,
I was wondering if you could take a minute out of your day to help us?
We're trying to solve a problem
Hi all,
With this post, after many years of using the
*plasticu...@gmail.com*address, I am changing over to using the
*d...@sinclairql.com* address.
As I start supplying hardware to the community, my relationship with it
changes, and I think the old email address is unprofessional and would like
Hi all,
I have assembled the remaining stock of TF Services' MPlane. These are a
great upgrade if you're using a less reliable backplane.
Mplane is a low profile backplane to allow three QL expansions and the
original motherboard or Aurora to be fitted in a case. It was originally
designed for
...@yahoo.co.ukwrote:
It's probably the sparkle that's blocking their view of the markings ;)
--- On Mon, 11/3/13, Dave Park plasticu...@gmail.com wrote:
From: Dave Park plasticu...@gmail.com
Subject: Re: [Ql-Users] [QL-Users] Data collection on (S)GCs
To: ql-us...@q-v-d.com
Date: Monday, 11
to
a separate connector. No separate power supply and no capacitors and all
worked well the whole time. I am a bit unsure why it should take such
things to make it work.
Cheers...Ralf
- Original Message - From: Dave Park
Hi all,
I have assembled the remaining stock of TF Services' MPlane
On Tue, Mar 12, 2013 at 3:36 PM, Tony Firshman t...@firshman.co.uk wrote:
Also provided is a standard ROM slot as an alternative when using Aurora,
which doesn't have the standard connector. When used with Aurora, this ROM
slot is fitted facing towards the case back, allowing access through
written
on it.
Arnold
From: Dave Park d...@sinclairql.com
To: ql-us...@q-v-d.com
Sent: Tuesday, 12 March 2013, 19:47
Subject: Re: [Ql-Users] [QL-Users] Data collection on (S)GCs
Hi everyone,
Thanks for the great response. Here are the results :)
CHIP
Excellent :) Enjoy it.
On Thu, Mar 14, 2013 at 4:12 AM, arnold.cla...@talk21.com wrote:
Hi Dave,
I dont use it much now, but when I do, it seems to be ok.
Arnold.
From: Dave Park d...@sinclairql.com
To: ql-us...@q-v-d.com
Sent
;)
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
port on it.
It's pretty neat. It's nearer GC than SGC speed right now but I'm working
on that.
On Sat, Mar 16, 2013 at 3:26 PM, Thierry Godefroy ql.us...@free.fr wrote:
On Sat, 16 Mar 2013 11:16:42 -0500, Dave Park wrote:
Hi all,
It's been mentioned that vanilla QDOS/Minerva doesn't run
http://www.q-v-d.demon.co.uk/smsqe.htm
:O No more QL todays?!
Peter
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL
. Please excuse my brevity.
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk
be deprecated.
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
in MPlanes and battery holders and
a few fun prototypes/samples right now!
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
, which is typically less than half the cost?
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
to see QL Today go. If you read QL Today and you're not a member
of Quanta, use the subscription money to join before we lose yet another
essential yet diminishing resource.*
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing
.
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
I find some irony in that a thread about the demise of QL Today has
degenerated into a conversation of violent agreement about grammar!
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk
of this list.
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
, a maxed out Trump Card, $137.50 and, oh yes, MPlanes for
$40...
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Ooops, yes, I did forget to type the pound signs... :)
Sorry!
£255 and £137.50 respectively.
On Tue, Mar 26, 2013 at 11:14 AM, Mark Martin storycraf...@gmail.comwrote:
On Tue, Mar 26, 2013 at 11:04 AM, Dave Park d...@sinclairql.com wrote:
Also, pop in to SellMyRetro.com and check
no subscription renewal.
François Van Emelen
__**_
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/**smsqe.htmhttp://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
, and incredibly small, but can run
anything you can plug in, including hard drives, floppies, etc. More on
that later.
Hope everyone has a great week!
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v
, so recursively re-enter the Ignore procedure ...)
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http
and to everyone involved in the magazine and
DVD.
George
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http
://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
/**smsqe.htmhttp://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
actually attend - if just for the sunny weather and 6th Street ;)
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
this, although I believe there
isn't much need for such a budget. This is mostly a volunteer time kind of
thing for all parties.
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
, Oct 24, 2013 at 1:25 PM, Lee Privett lee.priv...@gmail.com wrote:
Not so well on iOS devices by my experience, however that may have been a
one off.
On 24 Oct 2013 18:44, Dave Park d...@sinclairql.com wrote:
Skype is the only stable mass market video platform that allows multiple
callers
:
Video on iPad didn't work for me
On 24 Oct 2013 19:36, Dave Park d...@sinclairql.com wrote:
I have used Skype on iOS 3 thru 7 on iPhones 2, 4, 4s and 5, without
problems. I *have* had one set of problems with Skype due to skype's own
server issues, but that was in 2008 and has not recurred
today is the
last chance to place your order, if you still want it:
http://smsq.j-m-s.com/
Best regardsJochen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d
in January. I would be happy to give the £20 saved as a contribution to the
cost of a hall,
Best Wishes,
Geoff
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
MB default, can not be used on an
unexpanded QL at all. This won't change.)
Peter
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
. It's only that for this prototype, I've used the PLCC44
version, with PLCC44 socket. Production boards may have the VQ64, or TQ100
version (cheaper).
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy
Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
still think there is
a place for online articles if anyone is interested.
If we work hard we can make the 30th QL year something to be proud of as
Dave Park suggested,
Best Wishes,
Geoff
www.gwicks.net/justwords.html
___
QL-Users Mailing
Like I said, sinclairql.com is offline ;)
On Sat, Jan 4, 2014 at 12:19 PM, Derek Stewart de...@q40.de wrote:
Hi Dave,
I tried to access sinclairql.com, it does not seem to be available.
Regards,
Derek
On 04/01/14 17:32, Dave Park wrote:
I installed a few CMS systems offline
is cancelled for *any* reason, the pledge(s) must be
returned *immediately*.
*List of pledges:*
*Sandy Electronics / Dave Park£150*
If anyone else would like to add to this pledge list, please simply add
their name and pledge, then repost. If they have additional or different
conditions
Please discuss the proposed show in the other thread - this thread is
strictly for pledges and discussion of funding.
On Sun, Jan 5, 2014 at 12:44 PM, Ralf Reköndt ralf.rekoe...@t-online.dewrote:
OK, I would prefer Eindhoven.
- Original Message - From: Dave Park d...@sinclairql.com
, DougL externa...@earthlink.net wrote:
USD200 let me xlateto pounds/xlate say tomorrow.
Doug L. 37830 USA
QL Foreverr
Sent from my U.S. Cellular® Android phone
Mark Martin storycraf...@gmail.com wrote:
On Sun, Jan 5, 2014 at 12:39 PM, Dave Park d...@sinclairql.com wrote:
I offer
Hehe, ok. Thank you even more!
Currently:
Sandy Electronics / Dave Park£150
Mark Martin £ 30
Petri Pellinen £ 50
Doug L £150
TOTAL£380
I
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
. This
will be an open standard. If any party intends to make a motherboard or
expansion that uses the new standard, they can use it royalty free and
without obtaining consent. I, Dave Park, will maintain the standard, and
will take requests for designation of available pins by mounting a
discussion like
ie A20 - 23 on
pins C15 - C18.
Cheers,
Malcolm
On 14/01/2014 11:45, Dave Park wrote:
A proposal for an extension of the J1 expansion connector to three rows.
The intent is for it to be backwards compatible with all traditional
64-pin
expansion cards.
The purpose of the 96-pin
is interested and would like to know more, please contact me
privately by email. Compensation includes subsidized early access to
hardware.
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
a
serial EEPROM.
Obviously, we're at the very earliest stages of development, so it's quite
easy to change direction at this time.
Are you interested in open sourcing the work you've done?
Dave
On Tue, Jan 21, 2014 at 3:12 AM, Peter pg...@q40.de wrote:
On 20 Jan 2014 at 20:05, Dave Park
?
Or something else?
On Tue, Jan 21, 2014 at 3:22 PM, Dave Park d...@sinclairql.com wrote:
Hi Peter,
In all cases, I would like to go for compatibility with other systems.
Drivers are a huge obstacle, so any kind of progress is a head start.
I did a quick read of the datasheet, and I can see
between different systems (emulators, Atari, QL...).
Thanks
Best regards
Davide
-Messaggio originale-
Da: ql-users-boun...@lists.q-v-d.com
[mailto:ql-users-boun...@lists.q-v-d.com] Per conto di Dave Park
Inviato: martedì 21 gennaio 2014 03:06
A: ql-us...@q-v-d.com
Oggetto: [Ql-Users
to do it yourself.
Peter
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
of years ago they were fine.
:-/
Still, at least the MICE ROM and mouse still works fine, as you can see...
Steve
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
in a couple of days.
Dave
On Fri, Jan 24, 2014 at 2:28 PM, Dave Park d...@sinclairql.com wrote:
I just measured on an unopened cartridge (until now) and the pad is 4mm
long, 3mm deep, and 1.5mm high.
The microdrive capstan is 5.0 mm high, 6.0 mm diameter, with a 1.75mm
hole, on Samsung built
-
30-years-since-the-announcement-of-an-important-computing-product/
4 bit intel processor?!
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
List
http://www.q-v-d.demon.co.uk/smsqe.htm
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
___
QL-Users Mailing List
http
need to do it yourself.
Not that expensive. But the MAC number can always be reused from an old
(and broken) ethernet card, or like.
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d
/qpc/downloads.html to get it.
The package contains QPC2 v4.01 and the latest SMSQ/E 3.18.
Cheers, Marcel
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
heatsink, that could
sometimes be a problem. That was why we changed the design to have a
switching power supply. Others solved the problem by moving the heatsink
to outside the case, so it was still inefficient, but the heat was already
outside.
--
Dave Park
Sandy Electronics, LLC
d...@sinclairql.com
of data recovery.
Datum: Fri, 31 Jan 2014 15:03:52 +0100
Von: Stephen Usher st...@lingula.org.uk
An: ql-users@lists.q-v-d.com
On 31/01/14 13:41, Dave Park wrote:
On the earlier version that had the long slotted heatsink, that could
sometimes be a problem. That was why we changed the design
voltage regulator. Even my latest
Mouse version had it.
Cheers...Ralf
- Original Message - From: Dave Park
That was why we changed the design to have a
switching power supply.
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk
???
Cheers...Ralf
- Original Message - From: Stephen Usher
On 31/01/14 14:11, Dave Park wrote:
All versions used the Sinclair-style case (we thought they looked neat,
and
Sinclair was almost giving them away).
Does it have a round yellow, green or orange sticker on it?
I'll
101 - 200 of 324 matches
Mail list logo
