Hi, SMSQ/E 3.31 boots OK on my Q60. Just MenuConfiged keyboard language from english to german and still boots OK. Sorry can't reproduce the problem. Duncan On Sun, Nov 12, 2017 at 12:19 PM, Peter Graf via Ql-Users < email@example.com> wrote: > Hi, > > the original SMSQ/E 3.31 Q40 boots here on my Q60/80 with LRESPR. > > But if I do even the slightest configuration with MENUCONFIG, it crashes > on boot. Just language settings, nothing else. > > Can anyone with Q60 reproduce this problem? > > All the best > Peter > ___ > QL-Users Mailing List > ___ QL-Users Mailing List
smsqe is required for 16 bit colours so 33 is the answer On Sat, Nov 11, 2017 at 6:48 PM, Giorgio Garabello via Ql-Users < firstname.lastname@example.org> wrote: > The question is: on q40 with 16 bit mode color if i type print Disp_type > what i see? 1 or 33? > > Il 11 nov 2017 18:50, "Peter Graf via Ql-Users"
> ha scritto: > > Am 11.11.2017 um 17:58 schrieb Giorgio Garabello via Ql-Users: > > 64 – 24-bit colour mode (no hardware supports this at the time of > writing) > > Hmmm... was there _software_ support at the time of writing? > > > DISP_TYPE > > The DISP_TYPE function is used to find the type of display. For the Q40, > > there are two values that may be returned. > > 0 Original ST QL emulator (this value is returned on QL based hardware). > > *1 16 bit colour mode.* > > The Q40 supports both original QL hardware modes and 16 bit highcolour. > It depends on what you select. > > Peter > > > > ___ > QL-Users Mailing List > ___ > QL-Users Mailing List ___ QL-Users Mailing List
Hi Peter, the version of menuconfig I have is 3.36 and is dated 2003. I have configured both the keyboard and message language from English to German - still boots OK. And then the same from german to french and it boots normally and finally French back to English and it boots OK. The version of menuconfig on Dilwyn's site is 3.34 Cheers Duncan On Mon, Nov 13, 2017 at 10:21 AM, pgraf--- via Ql-Users < email@example.com> wrote: > Hi Duncan, > > thanks for trying. > > > SMSQ/E 3.31 boots OK on my Q60. Just MenuConfiged keyboard language from > > english to german and still boots OK. Sorry can't reproduce the problem. > > Did you only change the keyboard, or also general language? > > Would be great if you can tell something about your MENUCONFIG > version also. My version from Dilwyn Jones' site at > > http://www.dilwyn.me.uk/config/index.html > > seems from 1999. Not sure that is up to date. > > Peter > > ___ > QL-Users Mailing List > ___ QL-Users Mailing List
Hi Wolfgang, Fantastic news for Qx0 users, many thanks. Duncan On Sun, Dec 10, 2017 at 2:04 PM, Wolf via Ql-Users
wrote: > Hi all, > > SMSQE 3.32 is out now. > > Below is a swmall account of what has changed. > > - Bugfixes: > There are various bugfixes for network drive names resolution. > QPC & SMSQmulator use the correct SQRT replacement routines. > QPC better handling of removable drives. > > Additional features: > > - Filesystem for FAT16 disks of up to 256 MiB (currently only ysed in Q68). > > - Filesystem for QUBide drives. > > - Q40/Q60: > It is now possible to use IDE hard disks formatted with FAT32 and contining > QXL.WIN "drives" (see explanation in the extras_new directory). > The purpose of this is to allow easier data exchange between the Qx0 and > the rest of the QL world : Adapters exist which will plug into the Q40 IDE > connector and can read SDHC memory cards. If you format such a card on > FAT32, you can exchange QXL.WIN drives easily! You can, of course, also use > a FAT32 formmated hard disk with QXL.WIN files on it0 > DISP_MODE command for Qx0 introduced. > Please note that this version cannot be burned into an EPROM. > > - Q68 > Q68 version of SMSQE introduced. > > Find it at > > http://www.wlenerz.com/smsqe/ > > > Have fun. > > Wolfgang > ___ > QL-Users Mailing List > ___ QL-Users Mailing List
Sorry to hear that. Best wishes for a speedy recovery. Duncan On Fri, Oct 20, 2017 at 9:00 AM, Derek Stewart via Ql-Users < firstname.lastname@example.org> wrote: > There will be a slight delay in the availability of the Q68, which I > stated in a previous message to be available on 09/10/2017 > > I have had medical problems, I went into hospital on 22/9/17, to have a > throat operation. This should of been a one day operation. > > But there was a problem with the procedure they used and I ended up having > a Tracheotomy Tube inserted into my airway to keep me alive. > > I stayed in The Royal Liverpool Hospital Intensive Care Unit for 12 days > attached to a ventilator, which was assisting my breathing. > > The tube was removed and I was discharged home, to the care of a visiting > District Nurse. The nurse changes the dressings daily. > > I have been home for 2 weeks and just now, starting to regain my strength > and concentration. > > There was a notice posted on the QL Forum, regarding the delay, which > obviously did not get to everyone. > > The new date will be 06/11/2017. > > Here is the link to the notice: > > http://www.qlforum.co.uk/viewtopic.php?f=2=2120#p19180 > > I am sorry for the delay, I will try to update everyone on a regular basis. > > With regards to availability of the Q68. I have created a list of people > who showed interest in date order. Which I will contact to arrange the sale > of the Q68. > > -- > Regards, > > Derek > -- > Regards, > > Derek > ___ > QL-Users Mailing List > ___ QL-Users Mailing List