Has anybody got this program working and if so how did they do it?
We have tried it and all we get is an error message *** Supercharged
Basic halted after line 3 ***
John
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
On 2014-02-09 16:23, jms1 wrote:
Has anybody got this program working and if so how did they do it?
We have tried it and all we get is an error message *** Supercharged
Basic halted after line 3 ***
John
___
QL-Users Mailing List
It works on q-emulator - what are you trying to run it on?
One of the problems with the original version was that it used a file called
'con' which SMSQ/e and Minerva don't like. I think that has been renamed in the
distribution from Dilwyn's site.
Rich
On February 9, 2014 at 4:28 PM jms1
Concept 3D now available as freeware
A 3D graphics package, written by the late Robert Fingerle and published by US
software house Tesseract Software.
Prior to his death, the author gave permission for the software to be freely
released for the QL.
The software is configured for microdrive,
I have the manual, but it's been a couple of years since I've seen it
and I need to dig a bit to find it.
When I do, I will scan it and make it available.
Tim Swenson
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
I scanned my manual of Concept 3D a while back. It is quite big though; 70MB in
size. If someone can handle files that big, I can send it right away. If not I
can try to rescan it at a lower quality setting.
I am looking forward to play with that software again. My original microdirve
died
There should be a way to lower the resolution without doing a rescan.
Please check out ImageMagick. It supports batch process of image files.
It is portable and I've used it on both Windows and Linux.
http://www.imagemagick.org/
There is a -density option so that dpi can be changed.
Tim
While we're on the subject of manuals, etc.
I have a fair amount of free time, so I am willing to re-typeset manuals
and clean up any graphics/charts/etc... I'm sure I can do a bit better than
some of the OCRd manuals out there.
Dave
On Mon, Feb 3, 2014 at 7:59 PM, Timothy Swenson
On 02/03/2014 06:10 PM, Dave Park wrote:
I have a fair amount of free time, so I am willing to re-typeset manuals
and clean up any graphics/charts/etc...
I'm sure we've all done that. I've got some that I retyped and/or
formated. Maybe someone (with lots of free time :-) ) should volunteer
PROTECTED]
Sent: Saturday, December 17, 2005 4:07 AM
Subject: Re: [ql-users] Concept 3D
On Fri, 16 Dec 2005 09:14:47 +0100, [EMAIL PROTECTED]
[EMAIL PROTECTED] wrote:
Very good idea. A pity that an author has lost his source code. In which
language is it written?
He does not remember, but when
On Sat, 17 Dec 2005 10:17:59 +0100, Ralf Reköndt
[EMAIL PROTECTED] wrote:
WHAT? He does not remember? Can't really understand this. What was the
time
of writing? As long as the program does not do dirty things, it would run
under the emulators. But I didn't believe.
Concept 3D was written
On Fri, 16 Dec 2005 09:14:47 +0100, [EMAIL PROTECTED]
[EMAIL PROTECTED] wrote:
Very good idea. A pity that an author has lost his source code. In which
language is it written?
He does not remember, but when I saw it being developed I'm pretty sure it
was in SuperBasic and he compiled it.
Timothy Swenson wrote:
One of the few QL programs that was written in the US and sold in the UK
is Concept 3D, a 3D wire frame graphics program, written by Robert
Fingerlee. I don't know who sold it, but like other dealers, the rights
to the original program might not be back in the hands
One of the few QL programs that was written in the US and sold in the UK
is Concept 3D, a 3D wire frame graphics program, written by Robert
Fingerlee. I don't know who sold it, but like other dealers, the rights
to the original program might not be back in the hands of the Author.
Back
14 matches
Mail list logo