Re: [Ql-Users] QLiberator and QLOADREF

[Dilwyn Jones via Ql-Users]

Just a quick note that strictly, Adrian didn't say yes to RPM - I think 
they had forgotten that utility but he said he would dig out all of his 
old disks and see what software and sources (when he returns to New 
Zealand in the next few days) and see what he can access.
OK - if the opportunity arises can you ask him about RPM? I'll leave it 
there as I think it's pretty useless until I get time to scan the manual.



I have v1.9 of QLOAD and v1.3 of QREF - were they the last versions?
Just checked now, yes that's what I uploaded. Obviously, if anyone knows of 
a more recent version, please send to me and I'll make available.


Dilwyn 


___
QL-Users Mailing List

Re: [Ql-Users] QLiberator and QLOADREF

[Dilwyn Jones via Ql-Users]

Good news The sources are also available?
As yet, no, we do not have the sources. But it will be great if Ian Stewart 
or Adrian Soundy can find those too.


I do have a printed manual for QLOAD/QREF but not had time to OCR the 4 
pages yet. Will do that as soon as I get time.


The manuals for the compilers were already on my hard disk. I can't remember 
who scanned them, I think the one for QLib 3 was by Adrian Ives, but I'm not 
100% sure, not sure who did the one for QLib 1.


Dilwyn 


___
QL-Users Mailing List

Re: [Ql-Users] QLiberator and QLOADREF

[Dilwyn Jones via Ql-Users]

Certainly they're the most recent versions I have, I *think* that's what was 
uploaded (I hope!) - it was all done in such a hurry!!!


Dilwyn

-Original Message- 
From: RWAP Software via Ql-Users

Sent: Tuesday, June 13, 2017 6:52 PM
To: ql-us...@q-v-d.com
Subject: Re: [Ql-Users] QLiberator and QLOADREF

Just a quick note that strictly, Adrian didn't say yes to RPM - I think
they had forgotten that utility but he said he would dig out all of his
old disks and see what software and sources (when he returns to New
Zealand in the next few days) and see what he can access.

I have v1.9 of QLOAD and v1.3 of QREF - were they the last versions?

Rich Mellor RWAP Software www.rwapsoftware.co.uk www.sellmyretro.com

On 2017-06-13 18:43, Dilwyn Jones via Ql-Users wrote:

Rich Mellor has been able to secure permission for the Liberation
Software range of compilers and utilities to be released as freeware.

So I have made available copies of the version 1 compiler and manual
(formerly known as Budget QLiberator) and version 3.36 compiler and
manual on a new QLiberator page on my website. The version 1 compiler
has less demanding requirements and can run on lower specification QL
systems.

Also available is the modified runtimes, patched for the problem where
the ERNUM and ERLIN error returns can be reversed in the standard
compiler runtimes if you use the RNUM and ERLIN functions in your
programs.

Additionally, an enhanced patch program for the compiler, allowing the
heap area to be made larger than the 512K limit of the original
software.

The QLOAD and QREF utilities are also available. QLOAD/QSAVE provide
tokenised fast load and save programs for SuperBASIC (not needed in
SBASIC as it has its own version of the QLOAD and QSAVE extensions).
QREF is a BASIC programming utility for SuperBASIC and SMSQ/E,
allowing you to list variables, procedures, functions etc, plus a
QFIND utility to locate a name within a program. A patch program is
supplied to patch the standard QREF to work with the new binary and
hexadecimal format constants in SBASIC (values preceded by % or $). A
manual for this utility will follow when I've had time to OCR it).

Finally, RPM is a Resident Program Manager, for creating resident
files from extensions, SuperBASIC programs, QLiberator object and
other executable programs, and some data files. A manual for this will
also follow once I've had time to OCR it.

We are very grateful to Ian Stewart and Adrian Soundy of Liberation
Software for letting us make these great programs available.

Download them all from the new QLiberator page on my website at
http://www.dilwyn.me.uk/qlib/index.html or at
http://www.greybeardz.com/qlib/index.html

___
QL-Users Mailing List

___
QL-Users Mailing List

---
This email has been checked for viruses by AVG.
http://www.avg.com 


___
QL-Users Mailing List

Re: [Ql-Users] QLiberator and QLOADREF

[RWAP Software via Ql-Users]

Just a quick note that strictly, Adrian didn't say yes to RPM - I think 
they had forgotten that utility but he said he would dig out all of his 
old disks and see what software and sources (when he returns to New 
Zealand in the next few days) and see what he can access.


I have v1.9 of QLOAD and v1.3 of QREF - were they the last versions?

Rich Mellor RWAP Software www.rwapsoftware.co.uk www.sellmyretro.com

On 2017-06-13 18:43, Dilwyn Jones via Ql-Users wrote:

Rich Mellor has been able to secure permission for the Liberation
Software range of compilers and utilities to be released as freeware.

So I have made available copies of the version 1 compiler and manual
(formerly known as Budget QLiberator) and version 3.36 compiler and
manual on a new QLiberator page on my website. The version 1 compiler
has less demanding requirements and can run on lower specification QL
systems.

Also available is the modified runtimes, patched for the problem where
the ERNUM and ERLIN error returns can be reversed in the standard
compiler runtimes if you use the RNUM and ERLIN functions in your
programs.

Additionally, an enhanced patch program for the compiler, allowing the
heap area to be made larger than the 512K limit of the original
software.

The QLOAD and QREF utilities are also available. QLOAD/QSAVE provide
tokenised fast load and save programs for SuperBASIC (not needed in
SBASIC as it has its own version of the QLOAD and QSAVE extensions).
QREF is a BASIC programming utility for SuperBASIC and SMSQ/E,
allowing you to list variables, procedures, functions etc, plus a
QFIND utility to locate a name within a program. A patch program is
supplied to patch the standard QREF to work with the new binary and
hexadecimal format constants in SBASIC (values preceded by % or $). A
manual for this utility will follow when I've had time to OCR it).

Finally, RPM is a Resident Program Manager, for creating resident
files from extensions, SuperBASIC programs, QLiberator object and
other executable programs, and some data files. A manual for this will
also follow once I've had time to OCR it.

We are very grateful to Ian Stewart and Adrian Soundy of Liberation
Software for letting us make these great programs available.

Download them all from the new QLiberator page on my website at
http://www.dilwyn.me.uk/qlib/index.html or at
http://www.greybeardz.com/qlib/index.html

___
QL-Users Mailing List

___
QL-Users Mailing List

Re: [Ql-Users] QLiberator and QLOADREF

[Giorgio Garabello via Ql-Users]

Good news The sources are also available?

Il 13 giu 2017 19:46, "Dilwyn Jones via Ql-Users" 
ha scritto:

> Rich Mellor has been able to secure permission for the Liberation Software
> range of compilers and utilities to be released as freeware.
>
> So I have made available copies of the version 1 compiler and manual
> (formerly known as Budget QLiberator) and version 3.36 compiler and manual
> on a new QLiberator page on my website. The version 1 compiler has less
> demanding requirements and can run on lower specification QL systems.
>
> Also available is the modified runtimes, patched for the problem where the
> ERNUM and ERLIN error returns can be reversed in the standard compiler
> runtimes if you use the RNUM and ERLIN functions in your programs.
>
> Additionally, an enhanced patch program for the compiler, allowing the
> heap area to be made larger than the 512K limit of the original software.
>
> The QLOAD and QREF utilities are also available. QLOAD/QSAVE provide
> tokenised fast load and save programs for SuperBASIC (not needed in SBASIC
> as it has its own version of the QLOAD and QSAVE extensions). QREF is a
> BASIC programming utility for SuperBASIC and SMSQ/E, allowing you to list
> variables, procedures, functions etc, plus a QFIND utility to locate a name
> within a program. A patch program is supplied to patch the standard QREF to
> work with the new binary and hexadecimal format constants in SBASIC (values
> preceded by % or $). A manual for this utility will follow when I've had
> time to OCR it).
>
> Finally, RPM is a Resident Program Manager, for creating resident files
> from extensions, SuperBASIC programs, QLiberator object and other
> executable programs, and some data files. A manual for this will also
> follow once I've had time to OCR it.
>
> We are very grateful to Ian Stewart and Adrian Soundy of Liberation
> Software for letting us make these great programs available.
>
> Download them all from the new QLiberator page on my website at
> http://www.dilwyn.me.uk/qlib/index.html or at
> http://www.greybeardz.com/qlib/index.html
>
> ___
> QL-Users Mailing List
>
___
QL-Users Mailing List

Re: [Ql-Users] QLiberator and QLOADREF

[Marcel Kilgus via Ql-Users]

Dilwyn Jones via Ql-Users wrote:
> Rich Mellor has been able to secure permission for the Liberation Software
> range of compilers and utilities to be released as freeware.

Wow, Rich, that is pretty cool news. Good work!

Cheers, Marcel

___
QL-Users Mailing List