Re: [Ql-Users] Qdos/Sms reference manual
Splendid! It all works now. Thank you! :) Per On 11/06/2018 07:36, Wolf via Ql-Users wrote: Hi all, new version on the site, should keep bookmarks etc..., thanks, Per, for pointing that out. Wolfgang ___ QL-Users Mailing List ___ QL-Users Mailing List
Re: [Ql-Users] Qdos/Sms reference manual
Hi all, new version on the site, should keep bookmarks etc..., thanks, Per, for pointing that out. Wolfgang ___ QL-Users Mailing List
[Ql-Users] Qdos/Sms reference manual
Hi all, the updated Qdos/Sms reference manual (v. 4.4) is now on my site. Have fun! Wolfgang ___ QL-Users Mailing List
[Ql-Users] QDOS/SMS reference manual 4.1
Hi all, a small error was corrected in the assembler example in section 10.9 of the manual. The new version of the manual is on my website: (www.wlenerz.com/QLStuff) Have fun Wolfgang ___ QL-Users Mailing List
Re: [Ql-Users] QDOS/SMS reference manual
Hi Marcel, I really wanted the manual on Kindle, which was completed prior to the updates of the PDF version. I may convert the manual to epub or kindle format. I did think of trying write an ereader for the QL, but never really got off the drawing board. Regards Derek -Original Message- From: "Marcel Kilgus" <ql-us...@mail.kilgus.net> Sent: 03/07/2016 20:13 To: "ql-us...@q-v-d.com" <ql-us...@q-v-d.com> Subject: Re: [Ql-Users] QDOS/SMS reference manual Wolfgang Lenerz wrote: > Derek Stewart has done an enormous job in redoing the QDOS/SMS reference > manual. > > You can find it on my website > > www.wlenerz.com/QLStuff. This is really well done, thank you very much Derek. I actually was halve-way through converting it myself when Wolfgang mentioned Derek was already on the job, so I stopped. But I know what amount of work that must have been, very commendable! All the best, Marcel ___ QL-Users Mailing List ___ QL-Users Mailing List
Re: [Ql-Users] QDOS/SMS reference manual
Wolfgang Lenerz wrote: > Derek Stewart has done an enormous job in redoing the QDOS/SMS reference > manual. > > You can find it on my website > > www.wlenerz.com/QLStuff. This is really well done, thank you very much Derek. I actually was halve-way through converting it myself when Wolfgang mentioned Derek was already on the job, so I stopped. But I know what amount of work that must have been, very commendable! All the best, Marcel ___ QL-Users Mailing List
[Ql-Users] QDOS/SMS reference manual
Hi all, Derek Stewart has done an enormous job in redoing the QDOS/SMS reference manual. You can find it on my website www.wlenerz.com/QLStuff. Have fun Wolfgan ___ QL-Users Mailing List
Re: [Ql-Users] QDOS / SMS,Reference Manual ebook
Hi Wolfgang, Of course I mistaken said Section 5.3, when it should be Section 5.2 So the possible changes for Section 5.2 end Paragraph could read: correction The IOF.FLSH and IOF.CHEK commands are subtly different: IOF.FLSH ensures that all write operations are complete, whereas IOF.CHEK ensures that all write and read operations (including prefetches) are complete. Not all drivers will implement this trap, e.g. for ram disks where this will just go to a MOVEQ 0,D0 and an RTS) /correction Does Regards, Derek On 13/05/15 07:00, Wolf wrote: Hi, I'm pretty sure that Marcel is right here (as usual). IOB.TEST makes no sense, this just checks whether there is still some input, not whether i/o/ operations are complete, so this must be IOF.CHEK. However, I had a (very quick, sorry) look at the sources and you can find the following in iod_iox_vector_asm ;+++ ; Directory Device check slave blocks ; ; d6 c p drive / file number ; a0 c p channel block ; a3 c p linkage block ; a4 c s definition block ; ; status return standard ;--- iox_chek jmp iox_flsh ; just flush So at least here, test just calls flush AFAIK, though, noting actually uses that. OTOH, not all drivers will implement this trap (I *** believe*** this might be the case, e.g. for ram disks where this will just go to a moveq 0,d0 and an rts) since you're redrafting the manual, you might want to add a little rider in this respect. Wolfgang On 05/12/2015 09:52 PM, Marcel Kilgus wrote: derek wrote: Hi, I just looked in the SMSQ/E sources and can not fond IOF.TEST. Is the statement in Section 5.3 correct? If not how should read. As I wrote I'm pretty sure they meant to write IOF.CHEK Marcel ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm * German - detected * English * German * Italian * Spanish * Swedish * French * English * German * Italian * Spanish * Swedish * French javascript:void(0); Not all drivers will implement this trap, E. G. for RAM disks where this will just go to a moveq 0, D0 and on RTS) ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] QDOS / SMS,Reference Manual ebook
Hi, The SMSQ/E sources say: iof.posv equ$44 ; set file POSition to Virtual address whatever that may be. I know of nothing that implements that. Wolfgang On 13/05/2015 11:59, George Gwilt wrote: According to Norman Dunbar’s wiki D0=$44 was reserved for rename, but not implemented. George ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] QDOS / SMS,Reference Manual ebook
Unless anybody knows what IOF.TEST is defined as I will find out and issue an update. According to Norman Dunbar’s wiki D0=$44 was reserved for rename, but not implemented. George QDOS Companion book (Andrew Pennell) says the same thing. Dilwyn ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] QDOS / SMS,Reference Manual ebook
Actually all #3 traps are implemented at the discretion of the device driver, so it's always just a documentation of what they should do, not necessarily of what they are actually doing ;-) IOF.FLSH and IOF.CHEK don't make sense for RAM discs, for example, there is nothing to flush, it's all just in RAM anyway. So they just say all right, did it and be done with it. I for one don't think this needs to be mentioned separately. Cheers, Marcel Derek Stewart wrote: Hi Wolfgang, Of course I mistaken said Section 5.3, when it should be Section 5.2 So the possible changes for Section 5.2 end Paragraph could read: correction The IOF.FLSH and IOF.CHEK commands are subtly different: IOF.FLSH ensures that all write operations are complete, whereas IOF.CHEK ensures that all write and read operations (including prefetches) are complete. Not all drivers will implement this trap, e.g. for ram disks where this will just go to a MOVEQ 0,D0 and an RTS) /correction Does Regards, Derek ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] QDOS / SMS,Reference Manual ebook
Hi Derek, Looks good to me. Wolfgang Of course I mistaken said Section 5.3, when it should be Section 5.2 So the possible changes for Section 5.2 end Paragraph could read: correction The IOF.FLSH and IOF.CHEK commands are subtly different: IOF.FLSH ensures that all write operations are complete, whereas IOF.CHEK ensures that all write and read operations (including prefetches) are complete. Not all drivers will implement this trap, e.g. for ram disks where this will just go to a MOVEQ 0,D0 and an RTS) /correction Does Regards, ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] QDOS / SMS,Reference Manual ebook
Hi Derek, I have already produced a ODT version in Libre Office, but does not have the corrections, format changes to the Trap listing into tables and interlinking of the sections. Could you let me have that? It possible to make the corrections to the manual and convert it to HTML and put online as a WIKI file for users to update and correct. Sure, I think so. Would this contravene any copyright? I really don't believe so. AFAIK, Jochen Merz did give permission for this to be e-published and I don't believe there were any restrictions in the format allowed. Regards Wolfgang ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] QDOS / SMS,Reference Manual ebook Reader
Hi, I am wondering if QL version of an Epub text reader is possible. Epub uses Zip hold all the files with the config files. A HTML Reader is required, maybe using Prowess HTML Reader or Lynx... Or maybe write fro scratch in SBASIC which should be fast enough. Regards, Derek On 13/05/15 09:49, Derek Stewart wrote: Hi, I have just tried unzipping the epub file to a directory, all the HTML linked pages seem to link crrectly in a web browser (Firefox) So when all the correction have been made a WIKI version could be produced. I have converted all the TRAP and Vector Tables to HTML tables, which size is depentan on the scree. Assuming viewing the manual on a mobile phone with small screen area may still format correctly, though I have to test this, I ideally wanted on a Kindle. Regards, Derek On 13/05/15 09:12, Derek Stewart wrote: Hi Wolfgang, I am really only putting the manual into epub/mobi format so that I can have it on a ereader for reference when trying to problem in assembley language. I have already produced a ODT version in Libre Office, but does not have the corrections, format changes to the Trap listing into tables and interlinking of the sections. It possible to make the corrections to the manual and convert it to HTML and put online as a WIKI file for users to update and correct. Would this contravene any copyright? Regards, Derek On 13/05/15 07:00, Wolf wrote: Hi, I'm pretty sure that Marcel is right here (as usual). IOB.TEST makes no sense, this just checks whether there is still some input, not whether i/o/ operations are complete, so this must be IOF.CHEK. However, I had a (very quick, sorry) look at the sources and you can find the following in iod_iox_vector_asm ;+++ ; Directory Device check slave blocks ; ; d6 c p drive / file number ; a0 c p channel block ; a3 c p linkage block ; a4 c s definition block ; ; status return standard ;--- iox_chek jmp iox_flsh ; just flush So at least here, test just calls flush AFAIK, though, noting actually uses that. OTOH, not all drivers will implement this trap (I *** believe*** this might be the case, e.g. for ram disks where this will just go to a moveq 0,d0 and an rts) since you're redrafting the manual, you might want to add a little rider in this respect. Wolfgang On 05/12/2015 09:52 PM, Marcel Kilgus wrote: derek wrote: Hi, I just looked in the SMSQ/E sources and can not fond IOF.TEST. Is the statement in Section 5.3 correct? If not how should read. As I wrote I'm pretty sure they meant to write IOF.CHEK Marcel ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] QDOS / SMS,Reference Manual ebook
Hi, I'm pretty sure that Marcel is right here (as usual). IOB.TEST makes no sense, this just checks whether there is still some input, not whether i/o/ operations are complete, so this must be IOF.CHEK. However, I had a (very quick, sorry) look at the sources and you can find the following in iod_iox_vector_asm ;+++ ; Directory Device check slave blocks ; ; d6 c p drive / file number ; a0 c p channel block ; a3 c p linkage block ; a4 c s definition block ; ; status return standard ;--- iox_chek jmp iox_flsh ; just flush So at least here, test just calls flush AFAIK, though, noting actually uses that. OTOH, not all drivers will implement this trap (I *** believe*** this might be the case, e.g. for ram disks where this will just go to a moveq 0,d0 and an rts) since you're redrafting the manual, you might want to add a little rider in this respect. Wolfgang On 05/12/2015 09:52 PM, Marcel Kilgus wrote: derek wrote: Hi, I just looked in the SMSQ/E sources and can not fond IOF.TEST. Is the statement in Section 5.3 correct? If not how should read. As I wrote I'm pretty sure they meant to write IOF.CHEK Marcel ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] QDOS / SMS,Reference Manual ebook
Hi Wolfgang, I am really only putting the manual into epub/mobi format so that I can have it on a ereader for reference when trying to problem in assembley language. I have already produced a ODT version in Libre Office, but does not have the corrections, format changes to the Trap listing into tables and interlinking of the sections. It possible to make the corrections to the manual and convert it to HTML and put online as a WIKI file for users to update and correct. Would this contravene any copyright? Regards, Derek On 13/05/15 07:00, Wolf wrote: Hi, I'm pretty sure that Marcel is right here (as usual). IOB.TEST makes no sense, this just checks whether there is still some input, not whether i/o/ operations are complete, so this must be IOF.CHEK. However, I had a (very quick, sorry) look at the sources and you can find the following in iod_iox_vector_asm ;+++ ; Directory Device check slave blocks ; ; d6 c p drive / file number ; a0 c p channel block ; a3 c p linkage block ; a4 c s definition block ; ; status return standard ;--- iox_chek jmp iox_flsh ; just flush So at least here, test just calls flush AFAIK, though, noting actually uses that. OTOH, not all drivers will implement this trap (I *** believe*** this might be the case, e.g. for ram disks where this will just go to a moveq 0,d0 and an rts) since you're redrafting the manual, you might want to add a little rider in this respect. Wolfgang On 05/12/2015 09:52 PM, Marcel Kilgus wrote: derek wrote: Hi, I just looked in the SMSQ/E sources and can not fond IOF.TEST. Is the statement in Section 5.3 correct? If not how should read. As I wrote I'm pretty sure they meant to write IOF.CHEK Marcel ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] QDOS / SMS,Reference Manual ebook
Dilwyn, Derek: There’s no mentioning of an IOF.TEST anywhere in the SMSQ/E 3.21 sources. Tobias Am 12.05.2015 um 21:10 schrieb Derek Stewart de...@q40.de: Hi Dilwyn, I have not looked at my paper copy of the manual, just used the PDF version. According to the PDF version: IOF.POSA D0=$42 IOF.POSR D0=$43 as you stated, there is no entry for D0=$44 I have a look at my hard copy version of SMS Technical Manual. There is no mention of a IOF.TEST, even though the same page in Section 5.3 refers to IOF.TEST I looked in the older QDOS Technical Manual, nothing like IOF.TEST This is looking like a major fault in the documentation, I suppose the best way to resolve this is to look at the SMSQ/E Sources and determine what the missing Trap call should be. Unless anybody knows what IOF.TEST is defined as I will find out and issue an update. Regards, Derek On 12/05/15 17:23, Dilwyn Jones wrote: In my printed copy of Jochen's QDOS/SMS Reference Guide, iof.posa and iof.posr also have the same key (d0=$42, whereas iof.posr should be $43 All the other $4x trap #3s are defined leaving only $44, which must be iof.test Dilwyn -Original Message- From: Rich Mellor Sent: Tuesday, May 12, 2015 4:56 PM To: ql-users@lists.q-v-d.com Subject: Re: [Ql-Users] QDOS / SMS,Reference Manual ebook That is great - any contributions to correct errors in the text are of course welcome, so that they can be incorporated into the free online version of the manual! On 12/05/2015 16:32, Derek Stewart wrote: I have been converting the QDOS/SMS Reference Manual PDF manual to work on my Kindle, using Sigil to convert the screen copied text to epub - mobi. This for my reference. I have nearly finished and corrected some obvious mistakes. However, there is a little problem in the manual: Section 5.2 File I/O, Page 3, Last Paragraph: quote The IOF.FLSH and IOF.TEST commands are subtly different: IOF.FLSH ensures that all write operations are complete, whereas IOF.TEST ensures that all write and read operations (including prefetches) are complete. /quote I can not find any reference to IOF.TEST Should this be IOB.TEST ? Regards, Derek ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] QDOS / SMS,Reference Manual ebook
I thought there was already an online version - or is it just pdf? On May 12, 2015 at 8:09 PM Derek Stewart de...@q40.de wrote: Hi Rich, I am using Sigil to edit the epub file, which formats each page pr section into a series of HTML files and uses ZIP compression to produce the final epub file. Which is how I produced the SBASIC Reference Manual Ebook, I dumped the HTML web pages into Sigil and after a little reformatting produced a nice ebook for my Kindle. Sigil can merge all the HTML pages into a single HTML file. So I suppose a web version is possible, on the assumption the detail can be corrected. Regards, Derek On 12/05/15 16:56, Rich Mellor wrote: That is great - any contributions to correct errors in the text are of course welcome, so that they can be incorporated into the free online version of the manual! On 12/05/2015 16:32, Derek Stewart wrote: I have been converting the QDOS/SMS Reference Manual PDF manual to work on my Kindle, using Sigil to convert the screen copied text to epub - mobi. This for my reference. I have nearly finished and corrected some obvious mistakes. However, there is a little problem in the manual: Section 5.2 File I/O, Page 3, Last Paragraph: quote The IOF.FLSH and IOF.TEST commands are subtly different: IOF.FLSH ensures that all write operations are complete, whereas IOF.TEST ensures that all write and read operations (including prefetches) are complete. /quote I can not find any reference to IOF.TEST Should this be IOB.TEST ? Regards, Derek ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm Rich Mellor RWAP Software www.rwapsoftware.co.uk www.sellmyretro.com ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] QDOS / SMS,Reference Manual ebook
derek wrote: Hi, I just looked in the SMSQ/E sources and can not fond IOF.TEST. Is the statement in Section 5.3 correct? If not how should read. As I wrote I'm pretty sure they meant to write IOF.CHEK Marcel ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] QDOS / SMS,Reference Manual ebook
Derek, I can not find any reference to IOF.TEST Should this be IOB.TEST ? I think youre right! No reference to IOF.TEST in the Smsq sources, only IOB.TEST. Dilwyn, In my printed copy of Jochen's QDOS/SMS Reference Guide, iof.posa and iof.posr also have the same key (d0=$42, whereas iof.posr should be $43 Youre right about iof.posr, but this has already been corrected in later additions. All the other $4x trap #3s are defined leaving only $44, which must be iof.test I dont think youre right about this. Trap#3, code $44 is set to iof.posv (set position to virtual address). See the keys_qdos_io include file in the sources. Per On 12/05/2015 17:32, Derek Stewart wrote: I have been converting the QDOS/SMS Reference Manual PDF manual to work on my Kindle, using Sigil to convert the screen copied text to epub - mobi. This for my reference. I have nearly finished and corrected some obvious mistakes. However, there is a little problem in the manual: Section 5.2 File I/O, Page 3, Last Paragraph: quote The IOF.FLSH and IOF.TEST commands are subtly different: IOF.FLSH ensures that all write operations are complete, whereas IOF.TEST ensures that all write and read operations (including prefetches) are complete. /quote I can not find any reference to IOF.TEST Should this be IOB.TEST ? Regards, Derek ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm . ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] QDOS / SMS,Reference Manual ebook
Derek Stewart wrote: I can not find any reference to IOF.TEST Should this be IOB.TEST ? No, doesn't make sense. I guess they meant IOF.CHEK. Marcel ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] QDOS / SMS,Reference Manual ebook
Hi Rich, I am using Sigil to edit the epub file, which formats each page pr section into a series of HTML files and uses ZIP compression to produce the final epub file. Which is how I produced the SBASIC Reference Manual Ebook, I dumped the HTML web pages into Sigil and after a little reformatting produced a nice ebook for my Kindle. Sigil can merge all the HTML pages into a single HTML file. So I suppose a web version is possible, on the assumption the detail can be corrected. Regards, Derek On 12/05/15 16:56, Rich Mellor wrote: That is great - any contributions to correct errors in the text are of course welcome, so that they can be incorporated into the free online version of the manual! On 12/05/2015 16:32, Derek Stewart wrote: I have been converting the QDOS/SMS Reference Manual PDF manual to work on my Kindle, using Sigil to convert the screen copied text to epub - mobi. This for my reference. I have nearly finished and corrected some obvious mistakes. However, there is a little problem in the manual: Section 5.2 File I/O, Page 3, Last Paragraph: quote The IOF.FLSH and IOF.TEST commands are subtly different: IOF.FLSH ensures that all write operations are complete, whereas IOF.TEST ensures that all write and read operations (including prefetches) are complete. /quote I can not find any reference to IOF.TEST Should this be IOB.TEST ? Regards, Derek ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] QDOS / SMS,Reference Manual ebook
Hi, I just looked in the SMSQ/E sources and can not fond IOF.TEST. Is the statement in Section 5.3 correct? If not how should read. Regards, Derek Original message From Marcel Kilgus ql-us...@mail.kilgus.net Date: 12/05/2015 20:26 (GMT+00:00) To ql-us...@q-v-d.com Subject Re: [Ql-Users] QDOS / SMS,Reference Manual ebook Dilwyn Jones wrote: In my printed copy of Jochen's QDOS/SMS Reference Guide, iof.posa and iof.posr also have the same key (d0=$42, whereas iof.posr should be $43 All the other $4x trap #3s are defined leaving only $44, which must be iof.test Actually $44 is defined as iof.posv in the sources, but I'd venture a guess that no driver on earth ever implemented it. Marcel ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] QDOS / SMS,Reference Manual ebook
In my printed copy of Jochen's QDOS/SMS Reference Guide, iof.posa and iof.posr also have the same key (d0=$42, whereas iof.posr should be $43 All the other $4x trap #3s are defined leaving only $44, which must be iof.test Dilwyn -Original Message- From: Rich Mellor Sent: Tuesday, May 12, 2015 4:56 PM To: ql-users@lists.q-v-d.com Subject: Re: [Ql-Users] QDOS / SMS,Reference Manual ebook That is great - any contributions to correct errors in the text are of course welcome, so that they can be incorporated into the free online version of the manual! On 12/05/2015 16:32, Derek Stewart wrote: I have been converting the QDOS/SMS Reference Manual PDF manual to work on my Kindle, using Sigil to convert the screen copied text to epub - mobi. This for my reference. I have nearly finished and corrected some obvious mistakes. However, there is a little problem in the manual: Section 5.2 File I/O, Page 3, Last Paragraph: quote The IOF.FLSH and IOF.TEST commands are subtly different: IOF.FLSH ensures that all write operations are complete, whereas IOF.TEST ensures that all write and read operations (including prefetches) are complete. /quote I can not find any reference to IOF.TEST Should this be IOB.TEST ? Regards, Derek ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm -- Rich Mellor RWAP Services Specialist Enuuk Auction Programming Services www.rwapservices.co.uk ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] QDOS / SMS,Reference Manual ebook
I have been converting the QDOS/SMS Reference Manual PDF manual to work on my Kindle, using Sigil to convert the screen copied text to epub - mobi. This for my reference. I have nearly finished and corrected some obvious mistakes. However, there is a little problem in the manual: Section 5.2 File I/O, Page 3, Last Paragraph: quote The IOF.FLSH and IOF.TEST commands are subtly different: IOF.FLSH ensures that all write operations are complete, whereas IOF.TEST ensures that all write and read operations (including prefetches) are complete. /quote I can not find any reference to IOF.TEST Should this be IOB.TEST ? Regards, Derek ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
