I would check your Mac dns at this point
> Il giorno 30 gen 2021, alle ore 13:03, Steve Linberg
> ha scritto:
>
> My apologies, everyone… tcpserver status code 256 apparently means that the
> client did not gracefully terminate the connection? So something is timing it
> out after 60 second
My apologies, everyone… tcpserver status code 256 apparently means that the
client did not gracefully terminate the connection? So something is timing it
out after 60 seconds. I tried a different client and a test message went right
through, so it appears to be a client-side issue (Apple Mail on
What is your local dns? Check also your /etc/hosts
> Il giorno 30 gen 2021, alle ore 12:48, Steve Linberg
> ha scritto:
>
> Thanks Eric, I changed from 8.8.8.8 to 1.1.1.1, but no difference… still a
> one-minute delay in the same place:
>
> 2021-01-30 15:45:02.015947500 tcpserver: pid 2233
Thanks Bill… I’m not running a local DNS. And regular nslookups from the
command-line are instantaneous, if that’s significant, using either 8.8.8.8 or
1.1.1.1, so I’m not sure that DNS is the issue here unless a different modality
would explain it; as I mentioned to Eric, I tried 1.1.1.1 and it
Thanks Eric, I changed from 8.8.8.8 to 1.1.1.1, but no difference… still a
one-minute delay in the same place:
2021-01-30 15:45:02.015947500 tcpserver: pid 2233 from 24.62.203.29
2021-01-30 15:45:02.016782500 tcpserver: ok 2233 MYHOST:104.236.46.99:587
:24.62.203.29::56627
--
One problem I ran into is that I was using djbdns as a forward online
caching relay to 1.1.1.1, but had problems with SpamAssassin. Some of the
SpamAssassin failed do to the black list lookups seeing it come from and
overused address (1.1.1.1).
To work around this, I set the resolv.conf to 1.1.1.
Try a different dns server
On 1/30/21 12:25 PM, Steve Linberg wrote:
Greetings all. I’ve been running qmail on my servers and vms for about
20 years and it’s mostly worked great, but I’m having a thumper of a
slowdown problem on my current setup and I can’t get to the bottom of
it… any help ap
Greetings all. I’ve been running qmail on my servers and vms for about 20 years
and it’s mostly worked great, but I’m having a thumper of a slowdown problem on
my current setup and I can’t get to the bottom of it… any help appreciated.
The environment is a very lightly-used private VM running ce
