Hello,
I had the same problems. Also after the:
yum --disablerepo=qmt-current update
I reboot the system and httpd won't start. After removing the line:
Include /etc/httpd/conf/squirrelmail.conf
httpd will start without any problems.
regards, Peter
Op 11-8-2020 om 02:59 schreef Gary Bowling:
you need to run yum clean all then run the command below.
Remo
> On Aug 12, 2020, at 10:17 PM, ChandranManikandan wrote:
>
> Hi Eric,
>
> I have run this command yum --disablerepo=qmt-current update clamav for
> update clamav,
> But error showing below.
>
> Error downloading packages:
>
Hi Eric,
I have run this command yum --disablerepo=qmt-current update clamav for
update clamav,
But error showing below.
Error downloading packages:
clamav-lib-0.102.4-1.el7.x86_64: [Errno 256] No more mirrors to try.
clamav-filesystem-0.102.4-1.el7.noarch: [Errno 256] No more mirrors to
Found the script and ran it. Appears to have cleaned up a few
things and created the log directories/files. So thanks for that.
I assume that's a "one time run" thing and now it's all set to
just yum update for the future?
No, didn't know about that. Guess I need to go back and read the
list :)
Do I need to run it?
Gary
On 8/10/2020 8:54 PM, Eric Broch wrote:
Did you use the script I put on github?
On
Yes Remo, not a clamav thing. Just something that happened when I
updated my machine. Just added it in case anyone else had the same
problem.
I also have now found that "mailman" was also enabled when I
updated my machine. I started
Did you use the script I put on github?
On 8/10/2020 6:26 PM, Gary Bowling wrote:
Thanks Eric, that worked a charm.
However, the update busted httpd. Turns out the httpd.conf file had
this at the end.
Include /etc/httpd/conf/squirrelmail.conf
But that file no longer exists. Since it
That should not depend on clamav
Remo
> Il giorno 10 ago 2020, alle ore 17:26, Gary Bowling ha scritto:
>
>
>
>
> Thanks Eric, that worked a charm.
>
>
>
> However, the update busted httpd. Turns out the httpd.conf file had this at
> the end.
>
>
>
> Include
Thanks Eric, that worked a charm.
However, the update busted httpd. Turns out the httpd.conf file
had this at the end.
Include /etc/httpd/conf/squirrelmail.conf
But that file no longer exists. Since it does exist in
add --disablerepo=qmt-current
On 8/10/2020 5:57 PM, Gary Bowling wrote:
Just tried "yum updating" my server. I recall some notes back and
forth about updating clamav since we're moving to the epel version.
Just want to make sure I don't screw something up.
Below is what I got when I
Just tried "yum updating" my server. I recall some notes back and
forth about updating clamav since we're moving to the epel
version. Just want to make sure I don't screw something up.
Below is what I got when I tried to update. I think what I
Does It really stayed without an answer?
On 04/10/2012 14:19, Mike Tirpak wrote:
I upgraded clamav a couple of days ago and everything went fine.
Clamav would catch everything with a virus attached inside a zip
file. Over the past two days, I've gotten two emails that have zip
files with
I upgraded clamav a couple of days ago and everything went fine. Clamav
would catch everything with a virus attached inside a zip file. Over
the past two days, I've gotten two emails that have zip files with
viruses inside them. Is there a tweek I should do with the new version
of clam?
Hi Amin,
yes it managed to download the correct version of the rpm
but it failed while rebuilding, now also im getting an error on
sandbox. please check the error below. I still have the old version
of clamav. anybody managed to upgrade their clamav, directly please
post steps or
Hi,
Im trying to upgrade clamav using the qtp-newmodel script, but
it's not upgrading; im still stuck at clamav version 0.96.0 instead of
0.96.1. What i've noticed is that the script is still downloading
the old rpm. Has someone managed to upgrade their clamav? and how?
thanks.
frank
hi frank
type qtp-newmodel in command line
and follow the on screen instructions
regards
NIshant Amin
On Thu, Aug 12, 2010 at 9:12 AM, Frank Ombech fomb...@gmail.com wrote:
Hi,
Im trying to upgrade clamav using the qtp-newmodel script, but
it's not upgrading; im still stuck at clamav
To: qmailtoaster-list@qmailtoaster.com
Subject: RE: [qmailtoaster] Clam-AV and backups
Clam will take care of itself. The process freshclam sees to that.
For your backups, if you plan on backing up to disk, it's easy, just set
a cron job to run qtp-backup. That grabs the entire QMT, mail, support
files
us by telephone at
(574) 266-2500 and delete the original message.
From: Phil Leinhauser [mailto:p...@teqknow.com]
Sent: Wednesday, May 20, 2009 12:17 PM
To: qmailtoaster-list@qmailtoaster.com
Subject: RE: [qmailtoaster] Clam-AV and backups
Clam will take care
Greetings list!
I just installed Qmail on a Centos 5.3 distro running on a virtual host.
With the install scripts, does Clam-AV update defs and install
automatically? For backups, what's a good program to use? I would
probably be backing up to disk. Thanks!
David Burke, PC Technician
Clam will take care of itself. The process freshclam sees to
that.
For your backups, if you plan on backing up to disk, it's
easy, just set a cron job to run qtp-backup. That grabs the entire
QMT, mail, support files and database. It currently puts the backup
into the root folder but you can
Hi David,
For backups, there is already installed the qtp-backup scrip.
I use this to do a daily backup, to the default /backup folder.
I then scp the backup to a second server, in case of Primary server failure
I also added my howto on the wiki, just search for automated backup.
madmac
David
It appears we have now moved to 95.1
Gilbert
-
Managed Qmailtoaster servers are now available
Visit http://qmailtoaster.com/QMTManaged.html to order yours today!
Qmailtoaster is sponsored by
Gilbert T. Gutierrez, Jr. wrote:
It appears we have now moved to 95.1
Gilbert
Saw that on the list earlier today. I'll work on getting a package up in
the next couple days. This version was only a bug fix version that did
not involve anything that pertains to how QMT uses it, so it's not a
@qmailtoaster.com
Subject: Re: [qmailtoaster] Clam 0.90.3 - Updated Info
Hi Phil,
this a virtualization server... 2xXEON 3,2GHz(now 2,6GHz),
16GB ram
(now
12), 4 dedicated RAID 1 Volumes running SUSE 10.2 with XEN
checking back 0.90.2 didn't have
Hi!
On a new server, the first clamd start took a while; after a few starts of
freshclam, the database has finally been updated; now, the start of clamd is
much quicker. Details can be seen in the appended log-messages.
Can it be, that the startup-issues that has been reported arise from
, 2007 6:51 AM
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] Clam 0.90.3 - Updated Info
Hi!
On a new server, the first clamd start took a while; after a few starts of
freshclam, the database has finally been updated; now, the start of clamd is
much quicker. Details can be seen
I didn't recognize this problem. The only thig I saw was the log delay at
start-up.
Johannes
Phil Leinhauser schrieb:
Hi Johannes,
I'm not sure about the rest of the folks here but the problem I was seeing
is the CPU is pegged at 99% by clamd for about the first 5 minutes of the
machine
i get the delay too. Erik said to recompile simscan but that didn't
seem to work.
On 6/21/07, Johannes Weberhofer, Weberhofer GmbH [EMAIL PROTECTED] wrote:
I didn't recognize this problem. The only thig I saw was the log delay at
start-up.
Johannes
Phil Leinhauser schrieb:
Hi Johannes,
I'm
This delay seem not to be related to simscan; clamav does not complete starting
and proir to that, simscan can not start connecting.
Johannes
slamp slamp schrieb:
i get the delay too. Erik said to recompile simscan but that didn't
seem to work.
On 6/21/07, Johannes Weberhofer, Weberhofer
.
Phil
-Original message-
From: A M [EMAIL PROTECTED]
Date: Mon, 18 Jun 2007 12:05:41 -0400
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Clam 0.90.3 - Updated Info
Hi,
I just had a server
Hi,
I just had a server downgrade (due to a fried processor) fom a 3.2 GHz to
a 2.6GHz and from 4GB Ram to 2GB ram and noticed this:
when starting clamd loads the entire database to memory while
doing some sort of checksum verification??? anyone can verify this???
the server has about a
into
full production.
I'm willing to live with a 5 minute spike in CPU as long as it does it's job.
Phil
-Original message-
From: A M [EMAIL PROTECTED]
Date: Mon, 18 Jun 2007 12:05:41 -0400
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Clam 0.90.3 - Updated Info
Hi,
I
willing to live with a 5 minute spike in CPU as long as it does it's job.
Phil
-Original message-
From: A M [EMAIL PROTECTED]
Date: Mon, 18 Jun 2007 12:05:41 -0400
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Clam 0.90.3 - Updated Info
Hi,
I just had a server downgrade
minute spike in CPU as long as it does it's
job.
Phil
-Original message-
From: A M [EMAIL PROTECTED]
Date: Mon, 18 Jun 2007 12:05:41 -0400
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Clam 0.90.3 - Updated Info
Hi,
I just had a server downgrade (due to a fried
overload it once I go into full
production.
I'm willing to live with a 5 minute spike in CPU as long as it does it's job.
Phil
-Original message-
From: A M [EMAIL PROTECTED]
Date: Mon, 18 Jun 2007 12:05:41 -0400
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Clam
: Mon, 18 Jun 2007 13:47:18 -0400
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] Clam 0.90.3 - Updated Info
Hi Phil,
this a virtualization server... 2xXEON 3,2GHz(now 2,6GHz), 16GB ram (now
12), 4 dedicated RAID 1 Volumes running SUSE 10.2 with XEN
checking back 0.90.2
[mailto:[EMAIL PROTECTED]
Sent: Monday, June 18, 2007 10:35 AM
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] Clam 0.90.3 - Updated Info
This is very peculiar. I have not been able to reproduce any of the clamav
problems stated on this list.
Perhaps we need to start doing profiling
-list@qmailtoaster.com
Subject: Re: [qmailtoaster] Clam 0.90.3 - Updated Info
Hi Phil,
this a virtualization server... 2xXEON 3,2GHz(now 2,6GHz), 16GB ram (now
12), 4 dedicated RAID 1 Volumes running SUSE 10.2 with XEN
checking back 0.90.2 didn't have this issue. didn't try out 0.90.1
.
-Original message-
From: A M [EMAIL PROTECTED]
Date: Mon, 18 Jun 2007 13:47:18 -0400
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] Clam 0.90.3 - Updated Info
Hi Phil,
this a virtualization server... 2xXEON 3,2GHz(now 2,6GHz), 16GB ram (now
12), 4 dedicated RAID 1
specifically for QMT with nothing on it but what
the
QMT installer put there and I also installed webmin.
-Original message-
From: A M [EMAIL PROTECTED]
Date: Mon, 18 Jun 2007 13:47:18 -0400
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] Clam 0.90.3 - Updated Info
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] Clam 0.90.3 - Updated Info
Hi Phil,
this a virtualization server... 2xXEON 3,2GHz(now 2,6GHz), 16GB ram
(now
12), 4 dedicated RAID 1 Volumes running SUSE 10.2 with XEN
checking back 0.90.2 didn't have
: [qmailtoaster] Clam 0.90.3 - Updated Info
Hi Phil,
this a virtualization server... 2xXEON 3,2GHz(now 2,6GHz), 16GB
ram
(now
12), 4 dedicated RAID 1 Volumes running SUSE 10.2 with XEN
checking back 0.90.2 didn't have this issue. didn't try out
0.90.1...
2007
PROTECTED]
Date: Mon, 18 Jun 2007 12:05:41 -0400
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Clam 0.90.3 - Updated Info
Hi,
I just had a server downgrade (due to a fried processor) fom a 3.2 GHz to
a 2.6GHz and from 4GB Ram to 2GB ram and noticed this:
when
As you see in the text,
your ClamAV engine is oudated
Obtain the latest file
from www.qmailtoaster.com
B/r
Ole
Fra: Supriyo Banerjee
[mailto:[EMAIL PROTECTED]
Sendt: 12. januar 2006 12:49
Til: qmailtoaster-list@qmailtoaster.com
Emne: [qmailtoaster] Clam
When I run
Emne: SV: [qmailtoaster] Clam
As you see in the text,
your ClamAV engine is oudated
Obtain the latest file
from www.qmailtoaster.com
B/r
Ole
Fra: Supriyo Banerjee
[mailto:[EMAIL PROTECTED]
Sendt: 12. januar 2006 12:49
Til: qmailtoaster-list@qmailtoaster.com
Emne: [qmailtoaster
Might be better to just wait for Nick to release the new package.On Jan 12, 2006, at 4:58 AM, Ole Johansen wrote:Ops ;) There is no such package released yet.But you can compile it yourself from the binaries you find on clamav.net, but it shouldn’t be necassary yet.
46 matches
Mail list logo
