ilto:quantumowners@googlegroups.com>>
Subject: RE: [Quantum Owners] Engine mount Timing side
No the rubber parts do not remove normally. The top upper engine mount require
a couple of modifications.
It requires one of the tabs cutting off and a small extension welding onto the
bottom of the mou
To: quantumowners@googlegroups.com
Subject: Re: [Quantum Owners] Engine mount Timing side
The rubber is moulded around the metalwork when the mount is made, no way of
making it removable.
And as Chris said, it wasn’t possible to use the Ford mount unmodified on the
CVH
The Quantum Mk2 Saloon
modded for longevity.
>
> --
> *From:* 'Paul S Quantum' via Quantum Owners Group <
> quantumowners@googlegroups.com>
> *Sent:* 23 April 2023 20:22
> *To:* quantumowners@googlegroups.com
> *Subject:* RE: [Quantum Owners] Engine mount Timing side
Quantums i always try to
modify parts that won’t need replacing at some point but not always feasible,
like this engine mount.
Jim
From: Mick L
Sent: Monday, April 24, 2023 8:31 AM
To: quantumowners@googlegroups.com
Subject: Re: [Quantum Owners] Engine mount Timing side
Not what I wanted
Owners] Engine mount Timing side
No the rubber parts do not remove normally. The top upper engine mount require
a couple of modifications.
It requires one of the tabs cutting off and a small extension welding onto the
bottom of the mount so the lower mounting hole is moved onto the welded
not removable once the
mount was modded for longevity.
From: 'Paul S Quantum' via Quantum Owners Group
Sent: 23 April 2023 20:22
To: quantumowners@googlegroups.com
Subject: RE: [Quantum Owners] Engine mount Timing side
No the rubber parts do not remove
No the rubber parts do not remove normally. The top upper engine mount require
a couple of modifications.
It requires one of the tabs cutting off and a small extension welding onto the
bottom of the mount so the lower mounting hole is moved onto the welded
extension piece.
The mounts were
The modification required is to the rubber section of the mounting, the
bit you need to replace.
A lug is cut off and another lug is extended downwards by welding on an
extra section.
You may be able to cut the extra section off your old mount.
It is covered in the Saloon build manual, page 18