[qubes-users] No sound after template upgrade to Fedora 27/28

[tierlebu]

I'm new to Fedora, forgive my stupidity but I upgraded from 26 -> 27 -> 28, 
instead of 26 -> 28. Anyway, After upgrading from 26 -> 27 sound stopped 
working, and is still not working on 28.

In Dom0 pavucontrol:playback shows only one VM (sound works) - which is still 
running 26. So it's not necessarily a dom0 thing, and appears to relate to the 
upgrade. Pulse audio is also definitely installed in the templates, although 
pactl and paplay have their "connection refused" - which is about the limit of 
my knowledge with pulseaudio - and I cannot diagnose the issue any further.

I have no special sound configuration, and very little custom configurations in 
/etc (almost none), so it's a pretty vanilla install - except a few packages. 
The install is actually only a few days old.

I'm not really sure what the Qubes sound architecture looks like, or how to fix 
my issue. Pulseaudio is also my (idiomatic) Achilles heel - so I'm here asking 
for some guidance.

Thanks!

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/1377293a-b591-409c-8139-c8ca0f107c7d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[qubes-users] Re: HCL - Thinkpad X1 Carbon 6th gen - Qubes 4.0

[richard . deyoung]

Just installed Qubes R4.0 on my X1 Carbon Gen 6 to find this issue still 
persists. Has anyone in this thread had any luck? I will not that I have not 
yet connected the device to the internet and, thus, have not run any updates 
for dom0.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/9212cff6-8066-479d-8d98-666e46f71182%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[qubes-users] Re: HCL - Thinkpad X1 Carbon 6th gen - Qubes 4.0

[richard . deyoung]

On Monday, April 16, 2018 at 5:14:43 PM UTC-5, fiasc...@gmail.com wrote:
> Summary: Install worked reasonably well and it boots with EFI into the 
> installed Qubes 4.0 nicely. There are a few issues to resolve.
> 
> 1. I have the model with a touch screen and I haven't debugged how to make it 
> work yet (I'll get to that and post back what worked).
> 
> 2. Suspend/resume doesn't work and I have to do a hard reset. A few times 
> (not all) I had to hard reset twice to get it to reboot properly.
> 
> 3. HCL reports no TPM, but I have a dTPM 2.0.
> 
> It's booting with UEFI smoothly. I haven't tested the mic, camera, or ports 
> except USB for storage yet. I'll update once I find fixes for the above. If 
> anyone could point me in the right direction for the suspend freezing issue, 
> let me know. I tried shutting down all VMs, including service VMs after 
> reading this, 
> https://groups.google.com/d/msg/qubes-users/81t26xq4MEI/HrfDEcjeAgAJ but the 
> problem persisted didn't change anything.

Just installed Qubes R4.0 on my X1 Carbon Gen 6 to find this issue still 
persists. Has anyone in this thread had any luck? I have not yet updated dom0. 

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/e4522283-051c-4542-87fb-fe3cad3791b3%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[qubes-users] Re: Where is Redshift Config file?

[Daniil .Travnikov]

воскресенье, 5 августа 2018 г., 18:03:00 UTC-4 пользователь Daniil .Travnikov 
написал:
> Could anyone tell me where is exactly must be locating config file 
> (redshift.conf) of Redshift sofware?

very appriciate

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/7d93ec6e-07a7-4bf1-9f1a-f4f89956ea96%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [qubes-users] Where is Redshift Config file?

[airelemental]

~/.config/redshift.conf

A minimal config is:

[redshift]
location-provider=manual

[manual]
lat=-50.0
long=100.0

5. Aug 2018 22:03 by loadc...@gmail.com :


> Could anyone tell me where is exactly must be locating config file 
> (redshift.conf) of Redshift sofware?
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "qubes-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to > qubes-users+unsubscr...@googlegroups.com 
> > .
> To post to this group, send email to > qubes-users@googlegroups.com 
> > .
> To view this discussion on the web visit > 
> https://groups.google.com/d/msgid/qubes-users/b1bdb4b9-cc5c-41f3-8532-b57d86c27daa%40googlegroups.com
>  
> >
>  .
> For more options, visit > https://groups.google.com/d/optout 
> > .

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/LJB9NMo--3-0%40tutanota.com.
For more options, visit https://groups.google.com/d/optout.

[qubes-users] Where is Redshift Config file?

[Daniil .Travnikov]

Could anyone tell me where is exactly must be locating config file 
(redshift.conf) of Redshift sofware?

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/b1bdb4b9-cc5c-41f3-8532-b57d86c27daa%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[qubes-users] Re: HCL - Purism Librem 13v2

[max via qubes-users]

søndag den 5. august 2018 kl. 15.04.20 UTC-4 skrev pixel fairy:
> On Saturday, August 4, 2018 at 1:44:41 PM UTC-7, Max Andersen wrote:
> > Major issues with Coreboot, crashes, etc.
> > 
> > -
> > https://forums.puri.sm/t/building-coreboot-from-source-official-script/1264/113
> > 
> > - https://github.com/QubesOS/qubes-issues/issues/3753
> > 
> > After several updates, install went fine. Now only minor issues:
> > 
> > Rattling fan noise, due to bios version. Will maybe get fixed:
> > https://militant.dk/Ny%20optagelse%203.m4a?dl=0
> > 
> > Pipe not recognized properly:
> > To make change permanent a workaround is required:
> > https://forums.puri.sm/t/keyboard-layout-unable-to-recognize-pipe/2022/3?u=max4
> > 
> > Having issues with danish keyboard layout and the '@' sign. Also having
> > issues with keyboard layout in qubes has to be default and not danish,
> > since copy paste fails to work.
> > 
> > Can not recommend this laptop for Qubes usage. I even ordered it with
> > qubes installed, but PureOS was installed and I had a battle to get
> > things right. Took forever and is actually not worth it, in my book.
> > Read about it here, if you like:
> > https://www.militant.dk/2018/02/22/ordering-a-purism-librem-13v2-to-run-qubes-4-0rc4/
> > 
> > Sincerely
> > 
> > Max
> 
> damn! thanks for the heads up!
> 
> (still looking forward the phone though)

Yup, looking forward to it, too :) Hopefully I'm not paying a fine with the 
extra tax when it arrives from the US Delivery from EU would have been 
preferred.

Sincerely
Max

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/f8e5bd70-5e68-4eb6-9bec-6e2c2fc40428%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[qubes-users] Re: HCL - Purism Librem 13v2

[pixel fairy]

On Saturday, August 4, 2018 at 1:44:41 PM UTC-7, Max Andersen wrote:
> Major issues with Coreboot, crashes, etc.
> 
> -
> https://forums.puri.sm/t/building-coreboot-from-source-official-script/1264/113
> 
> - https://github.com/QubesOS/qubes-issues/issues/3753
> 
> After several updates, install went fine. Now only minor issues:
> 
> Rattling fan noise, due to bios version. Will maybe get fixed:
> https://militant.dk/Ny%20optagelse%203.m4a?dl=0
> 
> Pipe not recognized properly:
> To make change permanent a workaround is required:
> https://forums.puri.sm/t/keyboard-layout-unable-to-recognize-pipe/2022/3?u=max4
> 
> Having issues with danish keyboard layout and the '@' sign. Also having
> issues with keyboard layout in qubes has to be default and not danish,
> since copy paste fails to work.
> 
> Can not recommend this laptop for Qubes usage. I even ordered it with
> qubes installed, but PureOS was installed and I had a battle to get
> things right. Took forever and is actually not worth it, in my book.
> Read about it here, if you like:
> https://www.militant.dk/2018/02/22/ordering-a-purism-librem-13v2-to-run-qubes-4-0rc4/
> 
> Sincerely
> 
> Max

damn! thanks for the heads up!

(still looking forward the phone though) 

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/e1820cab-ad3a-4de2-863b-ead6abf75101%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[qubes-users] Re: Fullscreenmode on my Windows HVM/VM

[Daniil .Travnikov]

суббота, 4 августа 2018 г., 7:29:22 UTC-4 пользователь myblackc...@gmail.com 
написал:
> Hey guys,
> 
> windows is now installed successfully and i try to config the Fullscreen Mode.
> 
> I used this command to come into the conf file.
> 
> - "sudo nano /etc/qubes/guid.conf"
> 
> In this file i change the conf so:
> 
> - On global i deleted the Hash-Tag on the fullscreen Mode and change the 
> value from false to true. 
> 
> The VM settings look like:
> 
> VM: {
>   My new Virtual machine: {
>   allow_fullscreen = true;
> };
> };
> 
> I not use the windows i3 Windows manager but i still install it.
> 
> If i opened the Windows VM and clicked to the button fullscreen nothing 
> happened.
> 
> Whats wrong with it?
> 
> About your help i very happy.
> 
> Thanks alot

When you say "Fullscreen Mode" you mean bigger resolution that you have now?

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/e55d08dc-30ac-4526-8878-c937fe44a340%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [qubes-users] Cant create Windows App VM based on a template

[Daniil .Travnikov]

воскресенье, 5 августа 2018 г., 7:39:31 UTC-4 пользователь Unman написал:
> On Sun, Aug 05, 2018 at 04:25:49AM -0700, Daniil .Travnikov wrote:
> > Also I tried this command now:
> > 
> > qvm-prefs win7 qrexec_timeout 300
> > 
> > 
> > And VM successfully turned off. But when I started for continue 
> > installation - the same situation like before this command.
> > 
> > VM just with yellow circle and without any window.
> > 
> 
> Try setting qvm-features win7 video-model cirrus
> 
> Then once installed reset to get full resolutions.

Thank you very much it works for me!

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/a3052c5e-dc1d-4791-a31d-1249ea2a77fc%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [qubes-users] Cant create Windows App VM based on a template

[Unman]

On Sun, Aug 05, 2018 at 04:25:49AM -0700, Daniil .Travnikov wrote:
> Also I tried this command now:
> 
> qvm-prefs win7 qrexec_timeout 300
> 
> 
> And VM successfully turned off. But when I started for continue installation 
> - the same situation like before this command.
> 
> VM just with yellow circle and without any window.
> 

Try setting qvm-features win7 video-model cirrus

Then once installed reset to get full resolutions.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/20180805113929.intihrp3em6eg5ck%40thirdeyesecurity.org.
For more options, visit https://groups.google.com/d/optout.

Re: [qubes-users] Re: newbie question about converting pictures into a trusted image

[Unman]

On Sun, Aug 05, 2018 at 11:16:24AM +0100, Unman wrote:
> On Sat, Aug 04, 2018 at 08:22:23AM -1000, John S.Recdep wrote:
> > On 08/04/2018 06:11 AM,
> > tirejeremy-re5jqeeqqe8avxtiumw...@public.gmane.org wrote:
> > > Can you help please to understand how it works more deeper
> > > 
> > > Why all random pic (jpeg,png, bmp etc) marked as untrusted. Are they not 
> > > passing the tests on dispvms?
> > > 
> > > *.jpg-untrusted - Does it usable or not?
> > > 
> > > if I have many different virtual machines (dispvms based on different 
> > > templates, which one do the tests start and do they run at all? how to 
> > > check it? very grateful.
> > > 
> > > https://github.com/QubesOS/qubes-issues/issues/2437
> > > https://theinvisiblethings.blogspot.com/2013/02/converting-untrusted-pdfs-into-trusted.html
> > > 
> > 
> > I am guessing "untrusted" is just the Name of your  AppVM (qube),  there
> > is no tests .
> > 
> > There is the ability to "create trusted pdfs" via an Disp Qube which
> > transforms the pdf format to all pixels  then it puts a larger copy back
> > in your original App Qube  and changes the name to  "foo-trusted.pdf"
> > but its no longer a pdf per se
> > 
> > I hope that helps ?
> 
> This isn't quite right.
> 
> "-untrusted" is the original file renamed. The "trusted" version has the
> same name as the original, or the name you gave it.
> The test , if any, is that you chose to convert the image, so must have
> considered the source to be questionable in some way.
> 
> The conversion is done in a disposableVM for the qube in which you are running
> the conversion.
> 
> When you convert a PDF it produces a fully formed error free PDF.
> Because it is image based it is not text searchable, which may be why John
> says it isn't a "PDF per se", but a PDF it is.
> 
> To some extent the ability to open files in dispVMs makes these
> utilities less important. It is possible, for example, to store such files in 
> minimal 
> templates with no viewers and always open them in offline dispVMs.

And it doesnt seem to be working for me in 4.0.
Errors with "Request refused" although all policies look fine.
I've raised an issue

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/20180805113029.yd4dbkelz4uvwdsk%40thirdeyesecurity.org.
For more options, visit https://groups.google.com/d/optout.

Re: [qubes-users] Cant create Windows App VM based on a template

[Daniil .Travnikov]

Also I tried this command now:

qvm-prefs win7 qrexec_timeout 300


And VM successfully turned off. But when I started for continue installation - 
the same situation like before this command.

VM just with yellow circle and without any window.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/bd9c587e-5a18-47d8-802e-467ed320548a%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [qubes-users] Cant create Windows App VM based on a template

[Daniil .Travnikov]

воскресенье, 5 августа 2018 г., 6:22:28 UTC-4 пользователь Unman написал:
> On Sun, Aug 05, 2018 at 03:04:02AM -0700, Daniil .Travnikov wrote:
> > понедельник, 23 апреля 2018 г., 6:25:52 UTC-4 пользователь Ivan Mitev 
> > написал:
> > How did you create TemplateVM? Or you create StandaloneVM at first with HVM 
> > virt_mode and then cloned somehow?
> > 
> > I am asking because when I am creating StandaloneVM all is right and 
> > working correctly.
> > 
> > But when I am trying to create Windows7 TemapletVM I got error: "Start 
> > failed: internal error: libxenlight failed to create new domain 'win7'" 
> > (this error existing when I am choosing PVH mode).
> > 
> > Also I don't know which virt_mode I must choose when I am trying to create 
> > win7 TemplateVM and which actions will be corret.
> > 
> I've just replied in the other thread.
> Use HVM and set kernel to none


Actually I am doing this:

qvm-create win7 --class TemplateVM --property virt_mode=hvm --label=green
qvm-prefs win7 memory 4096
qvm-prefs win7 maxmem 4096
qvm-prefs win7 debug true
qvm-prefs win7 kernel ''
qvm-volume extend win7:root 42g
qvm-start win7 --cdrom=dom0:/home/user/Downloads/Win7.iso

And VM starting normally and going to install, but when he is hoing to reboot, 
the yellow circle do not off and VM is working but without VM window.


If first command I am doing with '--class StandaloneVM' all is ok, but when I 
am choose '--class TemplateVM' then I got this problem.


Maybe existing another way to create TemapleVM for Windows 7 OS? I mean I am 
need in creating independent VM's where the main template will be the Winows 7.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/e964f304-7a7b-4d37-a594-9ca996560679%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [qubes-users] How to Disable Wi-Fi in Qubes 4.0?

[Unman]

On Sat, Aug 04, 2018 at 11:05:03AM -, 'awokd' via qubes-users wrote:
> On Fri, August 3, 2018 7:52 pm, Daniil .Travnikov wrote:
> > Tell me please the command in Dom0 or maybe somewhere in settings. How
> > can I disable the Wi-Fi adapter?
> 
> Right click the Wifi icon top right, edit connections, edit the one for
> wireless, uncheck "automatically connect" on general tab.
> 
> If you want to disable it entirely, check your UEFI configuration- should
> be able to turn off the adapter there.
> 

Or disable wifi from the Right click menu.
A quick work round would be to remove the adapter from sys-net if UEFI
doesnt allow configuration. I dont see traffic if it's not allocated to
a qube, but ymmv.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/20180805102725.anwh57eycyyoptot%40thirdeyesecurity.org.
For more options, visit https://groups.google.com/d/optout.

Re: [qubes-users] Cant create Windows App VM based on a template

[Unman]

On Sun, Aug 05, 2018 at 03:04:02AM -0700, Daniil .Travnikov wrote:
> понедельник, 23 апреля 2018 г., 6:25:52 UTC-4 пользователь Ivan Mitev написал:
> > On 04/23/2018 11:15 AM, galt...@gmail.com wrote:
> > steps:
> > - clone a working windows install into a TemplateVM (qvm-clone --class)
> > - create an AppVM based on this TemplateVM (had to fix the following
> > prefs because they weren't set properly: kernel, maxmem, memory, virt_mode
> > - replicate the private disk with `dd`
> > - start the new AppVM
> 
> How did you create TemplateVM? Or you create StandaloneVM at first with HVM 
> virt_mode and then cloned somehow?
> 
> I am asking because when I am creating StandaloneVM all is right and working 
> correctly.
> 
> But when I am trying to create Windows7 TemapletVM I got error: "Start 
> failed: internal error: libxenlight failed to create new domain 'win7'" (this 
> error existing when I am choosing PVH mode).
> 
> Also I don't know which virt_mode I must choose when I am trying to create 
> win7 TemplateVM and which actions will be corret.
> 
I've just replied in the other thread.
Use HVM and set kernel to none

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/20180805102225.noefgdmraemojcqk%40thirdeyesecurity.org.
For more options, visit https://groups.google.com/d/optout.

Re: [qubes-users] Re: Qubes4: Launching Win7AppVM from Win7Template

[Daniil .Travnikov]

воскресенье, 5 августа 2018 г., 6:04:04 UTC-4 пользователь Unman написал:
> On Sun, Aug 05, 2018 at 02:55:01AM -0700, Daniil .Travnikov wrote:
> > вторник, 17 июля 2018 г., 17:09:08 UTC-4 пользователь Peter написал:
> > > I'm using qubes 4 with qubes-windows-tools-4.0.0-1
> > > I have a win7 template which launches fine.
> > > 
> > > 
> > > I've made a Appvm from the template and when I try to start it has the
> > > following error:
> > > 
> > > 
> > > qvm-start win7vm
> > > 
> > > 
> > > ERROR: Start failed: internal error: libenlight failed to create new 
> > > domain 'win7vm', see /var/log/libvert/libxl/libxl-driver.log
> > > 
> > > 
> > > Can anyone help with this error?
> > > 
> > > 
> > > Does this have anything to do with the network issue with Windows7, where 
> > > you have to set a static IP address? 
> > > 
> > > 
> > > I don't see this error when launching any other VM's.
> > > 
> > > 
> > > libxl-driver.log has this:
> > > 
> > > 
> > > 
> > > 
> > > 2018-07-17 20:16:54.358+: xc: panic: xc_dom_core.c:208: failed to 
> > > open file 'None/vmlinuz': No such file or directory: Internal error
> > > 2018-07-17 20:16:54.358+: libxl: 
> > > libxl_dom.c:994:libxl__domain_firmware: xc_dom_kernel_file failed: No 
> > > such file or directory
> > > 2018-07-17 20:16:54.358+: libxl: libxl_dom.c:1140:libxl__build_hvm: 
> > > initializing domain firmware failed
> > > 2018-07-17 20:16:54.358+: libxl: 
> > > libxl_create.c:1284:domcreate_rebuild_done: cannot (re-)build domain: -1
> > > 2018-07-17 20:48:42.071+: xc: panic: xc_dom_core.c:208: failed to 
> > > open file 'None/vmlinuz': No such file or directory: Internal error
> > > 2018-07-17 20:48:42.071+: libxl: 
> > > libxl_dom.c:994:libxl__domain_firmware: xc_dom_kernel_file failed: No 
> > > such file or directory
> > > 2018-07-17 20:48:42.071+: libxl: libxl_dom.c:1140:libxl__build_hvm: 
> > > initializing domain firmware failed
> > > 2018-07-17 20:48:42.071+: libxl: 
> > > libxl_create.c:1284:domcreate_rebuild_done: cannot (re-)build domain: -1
> > > 
> > > 
> > > The other logs are below:
> > > 
> > > 
> > > cat /var/log/qubes/qrexec.win7vm.log /var/log/qubes/qubesdb.win7vm.log 
> > > /var/log/qubes/vm-win7vm.log
> > > 
> > > 
> > > 
> > > 
> > > domain dead
> > > cannot connect to qrexec agent: No such process
> > > 
> > > 
> > > 
> > > 
> > > vchan closed
> > > vchan closed
> > > vchan closed
> > > vchan closed
> > > vchan closed
> > > 
> > > 
> > > 
> > > 
> > > 2018-07-17 16:00:47,733 Creating directory: /var/lib/qubes/appvms/win7vm
> > > 2018-07-17 16:00:48,130 Creating icon symlink: 
> > > /var/lib/qubes/appvms/win7vm/icon.png -> 
> > > /usr/share/icons/hicolor/128x128/devices/appvm-red.png
> > > 2018-07-17 16:02:14,548 Starting win7vm
> > > 2018-07-17 16:02:18,294 Setting Qubes DB info for the VM
> > > 2018-07-17 16:02:18,295 Starting Qubes DB
> > > 2018-07-17 16:02:18,396 Activating the win7vm VM
> > > 2018-07-17 16:02:23,203 Start failed: qrexec-daemon startup failed: 
> > > Connection to the VM failed
> > > 
> > > 
> > > 2018-07-17 16:04:14,845 Starting win7vm
> > > 2018-07-17 16:04:19,028 Setting Qubes DB info for the VM
> > > 2018-07-17 16:04:19,029 Starting Qubes DB
> > > 2018-07-17 16:04:19,161 Activating the win7vm VM
> > > 2018-07-17 16:04:24,616 Start failed: qrexec-daemon startup failed: 
> > > Waiting for VM's qrexec agent...failed
> > > 
> > > 
> > > 2018-07-17 16:07:57,847 Starting win7vm
> > > 2018-07-17 16:08:01,926 Setting Qubes DB info for the VM
> > > 2018-07-17 16:08:01,927 Starting Qubes DB
> > > 2018-07-17 16:08:02,025 Activating the win7vm VM
> > > 2018-07-17 16:08:04,243 Start failed: qrexec-daemon startup failed: 
> > > Waiting for VM's qrexec agent...failed
> > > 
> > > 
> > > 2018-07-17 16:08:41,924 Starting win7vm
> > > 2018-07-17 16:08:45,910 Setting Qubes DB info for the VM
> > > 2018-07-17 16:08:45,911 Starting Qubes DB
> > > 2018-07-17 16:08:46,047 Activating the win7vm VM
> > > 2018-07-17 16:08:48,336 Start failed: qrexec-daemon startup failed: 
> > > Connection to the VM failed
> > > 
> > > 
> > > 2018-07-17 16:12:10,359 Starting win7vm
> > > 2018-07-17 16:12:14,594 Setting Qubes DB info for the VM
> > > 2018-07-17 16:12:14,595 Starting Qubes DB
> > > 2018-07-17 16:12:14,726 Activating the win7vm VM
> > > 2018-07-17 16:12:17,023 Start failed: qrexec-daemon startup failed: 
> > > Connection to the VM failed
> > > 
> > > 
> > > 2018-07-17 16:13:55,682 Starting win7vm
> > > 2018-07-17 16:13:57,858 Start failed: internal error: libxenlight failed 
> > > to create new domain 'win7vm'
> > > 2018-07-17 16:16:52,661 Starting win7vm
> > > 2018-07-17 16:16:54,430 Start failed: internal error: libxenlight failed 
> > > to create new domain 'win7vm'
> > > 
> > > 
> > > Thanks!
> > > 
> > > 
> > > Peter
> > 
> > Did you resolve this? Because I have the same problem in Qubes 4.0 when I 
> > am trying to start win7 templateVM (not standalone) I got the same error 
> > "Start failed: internal 

Re: [qubes-users] Re: newbie question about converting pictures into a trusted image

[Unman]

On Sat, Aug 04, 2018 at 08:22:23AM -1000, John S.Recdep wrote:
> On 08/04/2018 06:11 AM,
> tirejeremy-re5jqeeqqe8avxtiumw...@public.gmane.org wrote:
> > Can you help please to understand how it works more deeper
> > 
> > Why all random pic (jpeg,png, bmp etc) marked as untrusted. Are they not 
> > passing the tests on dispvms?
> > 
> > *.jpg-untrusted - Does it usable or not?
> > 
> > if I have many different virtual machines (dispvms based on different 
> > templates, which one do the tests start and do they run at all? how to 
> > check it? very grateful.
> > 
> > https://github.com/QubesOS/qubes-issues/issues/2437
> > https://theinvisiblethings.blogspot.com/2013/02/converting-untrusted-pdfs-into-trusted.html
> > 
> 
> I am guessing "untrusted" is just the Name of your  AppVM (qube),  there
> is no tests .
> 
> There is the ability to "create trusted pdfs" via an Disp Qube which
> transforms the pdf format to all pixels  then it puts a larger copy back
> in your original App Qube  and changes the name to  "foo-trusted.pdf"
> but its no longer a pdf per se
> 
> I hope that helps ?

This isn't quite right.

"-untrusted" is the original file renamed. The "trusted" version has the
same name as the original, or the name you gave it.
The test , if any, is that you chose to convert the image, so must have
considered the source to be questionable in some way.

The conversion is done in a disposableVM for the qube in which you are running
the conversion.

When you convert a PDF it produces a fully formed error free PDF.
Because it is image based it is not text searchable, which may be why John
says it isn't a "PDF per se", but a PDF it is.

To some extent the ability to open files in dispVMs makes these
utilities less important. It is possible, for example, to store such files in 
minimal 
templates with no viewers and always open them in offline dispVMs.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/20180805101624.l7ex4ageeblopnan%40thirdeyesecurity.org.
For more options, visit https://groups.google.com/d/optout.

Re: [qubes-users] Cant create Windows App VM based on a template

[Daniil .Travnikov]

понедельник, 23 апреля 2018 г., 6:25:52 UTC-4 пользователь Ivan Mitev написал:
> On 04/23/2018 11:15 AM, galt...@gmail.com wrote:
> steps:
> - clone a working windows install into a TemplateVM (qvm-clone --class)
> - create an AppVM based on this TemplateVM (had to fix the following
> prefs because they weren't set properly: kernel, maxmem, memory, virt_mode
> - replicate the private disk with `dd`
> - start the new AppVM

How did you create TemplateVM? Or you create StandaloneVM at first with HVM 
virt_mode and then cloned somehow?

I am asking because when I am creating StandaloneVM all is right and working 
correctly.

But when I am trying to create Windows7 TemapletVM I got error: "Start failed: 
internal error: libxenlight failed to create new domain 'win7'" (this error 
existing when I am choosing PVH mode).

Also I don't know which virt_mode I must choose when I am trying to create win7 
TemplateVM and which actions will be corret.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/acb73b60-7844-4339-b174-16f3b16b83e7%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[qubes-users] How to enable Sound in Qubes 4.0

[Daniil .Travnikov]

I see that I have in Dom0 some Volume Control, and in 'Output Devices' it is on 
100%. But I can't hearing any sounds.


Also I see that I have '00:1f.3 Audio device: Intel Corporation Device a348 
(rev 10)' in Devices. But when I am trying to select and click 'OK', I see this 
message:

"Can't attach PCI device to VM in pvh mode".


Could anyone knows how to turn on any sound in system?



P.S. I am using headphones.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/d1194886-fb1a-46c7-9e22-ad2d0f41f9e0%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.