Hi Chris,
Yes ive been used V4 for a long time and I literally had 0 problems while
using it as daily driver. I switched to 4.0.1 and the only problem i had as
of now was backing up qubes but this was code related and has been fixed
already. :)
Cheers!
On Thu, Nov 29, 2018, 6:03 PM Chris wrote:
Hello max,
I think i know the answer to both questions but if there is something wrong
please correct me. (to the people that know a lot about qubes)
Regarding your first question. The download did indeed fail because there
was not enough disk space on your qube. I've had the same problem
I bought a latitude 7390 with 16G memory and 256G SSD and i7. Works fine
(without TPM though).
Bernhard
On 11/29/18 3:16 PM, Chris wrote:
Hello All,
Work said they will get me a new laptop and I would like to run Qubes V4
on it. Can anyone recommend a current model? I'd like an i7 with
Next in my qubes learning is the creation of a HVM. I noticed a couple things
through the process and wanted to get comments on some of the hang-ups.
First step was to download an .iso into one of my AppVMs. During this process,
the AppVMs were failing downloads after a couple of minutes. I
After reinstalling Qubes 4.0 without Whonix, I installed Whonix with :
https://www.whonix.org/wiki/Qubes/Install
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
Am Mittwoch, 28. November 2018 21:25:26 UTC+1 schrieb haaber:
> Sometimes, I need to acces my local net (192.168.1.X) via ssh, say. That
> usually finishes with "no route to host" (even in sys-net that has a
> 192.168.1.Y address) which is annoying. What do I miss? How shall I do
> it right
> Qubes-Whonix support ending for Qubes 3.2(.1) - upgrade to Qubes R4.0 or
> above required.
I don't think that is correct. Qubes 3.2 support is now gone, yes, but Qubes
3.2.1 support is not since 3.2.1 runs Whonix 14:
https://www.qubes-os.org/news/2018/11/12/qubes-321/ .
--
You received this
> If you're currently using an up-to-date Qubes 3.2 installation, then
> your system is already equivalent to a Qubes 3.2.1 installation. No
> action is needed.
Are you sure? I am on Qubes 3.2 and have installed all updates, yet whenever I
boot up I still receive a warning about using Whonix
IMO buy a W520 and install a quad core ivy bridge CPU - 32GB RAM and you
can use open source and open cpu/ram hw init coreboot[1] firmware and
also me cleaner to nerf the ME. (disabling ME is impossible)
It is easy to find components to refurb it yourself with a new
battery/keyboard/palmrest/lid
Is there a way to store the Window Layout from different dom0 applications? or
at least for Qubes Manager? i pull pretty often the panes to the right size,
just to do it after an reboot again. not that its that important tough but
it would be nice to save this amount of personalisation
I gave up and reinstalled Qubes 4.0 without Whonix/Anon then loaded the “Stable
version of Whonix 14” then recovered my Backed-up VMs that I wanted. Now it
works without error.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe
On Thu, Nov 29, 2018 at 09:35:58PM +0100, pieter lems wrote:
> Hello max,
> I think i know the answer to both questions but if there is something wrong
> please correct me. (to the people that know a lot about qubes)
> Regarding your first question. The download did indeed fail because there
>
yes I have, reboot brings nothing there :(
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send
On 11/28/18 7:01 PM, maxheadonl...@gmail.com wrote:
On Sunday, November 25, 2018 at 7:38:24 AM UTC-5, awokd wrote:
maxheadonl...@gmail.com wrote on 11/24/18 7:45 PM:
Hi all.
I've put enough time into this one where I'm finally willing to reach out for
some help. I wanted to see if I
and that happens sometimes, is that normal?
https://ibb.co/4fKLYkn
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To
On 11/30/18 4:35 AM, n1ete wrote:
Is there a way to store the Window Layout from different dom0 applications? or
at least for Qubes Manager? i pull pretty often the panes to the right size,
just to do it after an reboot again. not that its that important tough but
it would be nice to
New to Qubes. Hope I can get it to work. Would love to be a part of the
community.
Laptop is System76 Oryx Pro
Core i7 7700 2.80 Ghz
If the system goes to sleep, when you try to wake it the display remains dark.
Otherwise, Qubes seems to work fine.
--
You received this message because
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On 11/28/18 11:08 AM, Tseng Wynn wrote:
> Notes: If this post is more suitable for qubes-issues rather then
> qubes-users. then I will post on qubes-issues
It will be easier to track and fix.
-BEGIN PGP SIGNATURE-
Hello All,
Work said they will get me a new laptop and I would like to run Qubes V4 on it.
Can anyone recommend a current model? I'd like an i7 with lots of memory!
I had a look at the HCL but the models don't appear to be on the Dell site to
buy.
Many thanks for any help.
Regards,
Chris
-
Hello chris I switched from a dell xps 15 to a hp spectre x360 not long ago
and I must say i prefer the Hp spectre. I know it's not an answer to your
question and im sory for that but i thought i should mention it because
it's about the same price and has the same / better specs. Ive got the
model
Hello Pieter,
‐‐‐ Original Message ‐‐‐
On Thursday, 29 November 2018 16:19, pieter lems
wrote:
> Hello chris I switched from a dell xps 15 to a hp spectre x360 not long ago
> and I must say i prefer the Hp spectre. I know it's not an answer to your
> question and im sory for that but
21 matches
Mail list logo
