[qubes-users] Re: HCL - HP Pavilion

2017-09-11 Thread pixel fairy
On Monday, May 22, 2017 at 10:55:03 AM UTC-7, Michael wrote:
> I bought a new laptop and just took the SSD drive out of the old laptop
> and put it into the new laptop.  I turned the laptop on and booted up
> like nothing had changed...  Worked seamlessly

can you try installing to a usb drive to see if it works?

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/e4e105ad-99a1-46ca-a456-e115b26f60d0%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Best options for a 4.x compatible Dell workstation

2017-09-11 Thread pixel fairy
On Monday, September 11, 2017 at 10:31:56 PM UTC-7, pixel fairy wrote:
> given that appvms cant use 3d acceleration anyway, your best bet is intel 
> graphics. if your going to give a gpu to a vm, then it depends on the os of 
> that vm. 
> 
> last i checked, nvidia is fine with virtualization of quadro cards.
> 
> make sure the workstation doesnt have AMT (vpro etc) as bussiness lines tend 
> to. you may be safer with what dell would otherwise sell as a consumer 
> desktop or gaming rig, minus the fancy graphics card unless your going to use 
> it. but, if thats a big part of your work, you may be better off with linux + 
> kvm or something else instead of qubes.

damn nonlinear editing. that last sentence was supposed to go at the end of the 
first paragraph. 

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/651d3c74-40af-4d66-a838-5c4db6282ce8%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Best options for a 4.x compatible Dell workstation

2017-09-11 Thread pixel fairy
given that appvms cant use 3d acceleration anyway, your best bet is intel 
graphics. if your going to give a gpu to a vm, then it depends on the os of 
that vm. 

last i checked, nvidia is fine with virtualization of quadro cards.

make sure the workstation doesnt have AMT (vpro etc) as bussiness lines tend 
to. you may be safer with what dell would otherwise sell as a consumer desktop 
or gaming rig, minus the fancy graphics card unless your going to use it. but, 
if thats a big part of your work, you may be better off with linux + kvm or 
something else instead of qubes.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/0fb64ef4-15cf-4d34-aeed-73c3f45d6c66%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Re: Additional VPN destinations via CLI config?

2017-09-11 Thread filtration
qubester:
> On 09/11/2017 07:37 AM,
> anguilla1980-re5jqeeqqe8avxtiumw...@public.gmane.org
> wrote:
>> I followed the tutorial here, specifically "Set up a ProxyVM as a VPN
>> gateway using iptables and CLI scripts"
>>
>> https://www.qubes-os.org/doc/vpn/
>>
>> I like having the iptables anti-leak rules. However, it's connecting
>> automatically to my VPN providers destination that I downloaded their
>> .ovpn for.
>>
>> Is it possible to compile multiple locations and be able to select
>> which one?
>>
>> OR perhaps I'm going about this the wrong way? Should I instead use
>> the GUI way via NetworkManager? Can I configure that for multiple
>> destination choices then perhaps still add the iptables anti-leak rules?
>>
>> What's the best way?
>>
>> Thanks!
>>
> 
> na, just make another NetVM  like you did for the one you got , or 2 3
> etc up to you ,  what i've been doing is after suspend  just start the
> new non active  VPN NetVM and use it  , after changing the appVMs using
> it ,  bit tedious  but works
> 
Create a different VPN ProxyVM for each location you want to use.
You lose leak protection if you use NetworkManager, you should use the
iptables way.

Once you get the first ProxyVM setup correctly, you can copy its files
to other ProxyVMs to save time. Just verify their permissions and change
the desired server in the .ovpn file. Check your MTU settings, too.



-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/30d43377-7311-0970-7934-23594f9c006d%40posteo.de.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Re: re-use qemu qcow2 image for qubes-os

2017-09-11 Thread Drew White
Try converting the disks to just be img files, not qcow.

This is my config file for Windows that works on all my PCs.

If they don't work when you convert them, then there is something else wrong.

Just as a test, that is all.

If they do work when converted, then that will tell me everything I need to 
know to resolve the issue.


On Saturday, 9 September 2017 02:30:53 UTC+10, peter.p...@gmail.com  wrote:
> On Friday, September 8, 2017 at 8:22:29 AM UTC+2, peter.p...@gmail.com wrote:
> > On Friday, September 8, 2017 at 4:36:56 AM UTC+2, Drew White wrote:
> > > Have you tried the Startup Wizard Fix under Windows 7 boot?
> > > 
> > > On Wednesday, 6 September 2017 21:17:41 UTC+10, peter.p...@gmail.com  
> > > wrote:
> > > > I try to use an existing win7 qemu qcow2 image with qubes os R3.2
> > > > 
> > > > The image does not boot. I tried various xml settings for the drive 
> > > > image inspired by 
> > > > 
> > > > https://wiki.libvirt.org/page/After_import_a_guest_from_an_existing_disk_image_using_virt-install,_the_guest_starting_stalls_with_%22No_boot_device%22
> > > > 
> > > > but no success. Converting to raw is not an option.
> > > > 
> > > > What can I do?
> > > > Thanks,
> > > > Peter.
> > 
> > If this is using 'cirrus' instead of 'xen' as video device in the config 
> > file, then yes.
> > Or is this wizard something else that i am not aware of?
> 
> 
> I tried playing around with the disk definition of root.img (which is my 
> qcow2 image) in the config file:
> 
> 
> gives "libxenlight does not support disk format qcow2 with disk driver phy"
> 
> 
> gives "libxenlight does not support disk driver qdisk"
> 
> 
> gives "libxenlight failed to create new domain 'win7'"
> also changing the target dev from xvda to hda like in
> https://github.com/libvirt/libvirt-php/blob/master/tests/data/example-qcow2-disk.xml
> does not help.
> 
> a plain
> 
> boots my win7 installation iso, but the 'repair' function does not detect the 
> root.img drive...
> 
> 
> Is there any way to use qcow2 images in qubes-os?

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/44b6eaa0-ce66-4f07-bfcf-3701b100ffb9%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

  win7-guest
  
  512
  512
  2
  
hvm
hvmloader


  
  





  
  
  destroy
  destroy
  destroy
  



  
  
  
  



  
  
  







  

  




[qubes-users] Re: re-use qemu qcow2 image for qubes-os

2017-09-11 Thread Drew White
I mean LITERALLY the Windows Startup Wizard that comes up when it tried to boot 
it.


On Friday, 8 September 2017 16:22:29 UTC+10, peter.p...@gmail.com  wrote:
> On Friday, September 8, 2017 at 4:36:56 AM UTC+2, Drew White wrote:
> > Have you tried the Startup Wizard Fix under Windows 7 boot?
> > 
> > On Wednesday, 6 September 2017 21:17:41 UTC+10, peter.p...@gmail.com  wrote:
> > > I try to use an existing win7 qemu qcow2 image with qubes os R3.2
> > > 
> > > The image does not boot. I tried various xml settings for the drive image 
> > > inspired by 
> > > 
> > > https://wiki.libvirt.org/page/After_import_a_guest_from_an_existing_disk_image_using_virt-install,_the_guest_starting_stalls_with_%22No_boot_device%22
> > > 
> > > but no success. Converting to raw is not an option.
> > > 
> > > What can I do?
> > > Thanks,
> > > Peter.
> 
> If this is using 'cirrus' instead of 'xen' as video device in the config 
> file, then yes.
> Or is this wizard something else that i am not aware of?

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/24df6455-0745-47d5-8ec3-98540dd45bc3%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Re: Additional VPN destinations via CLI config?

2017-09-11 Thread qubester
On 09/11/2017 07:37 AM, 
anguilla1980-re5jqeeqqe8avxtiumw...@public.gmane.org wrote:

I followed the tutorial here, specifically "Set up a ProxyVM as a VPN gateway using 
iptables and CLI scripts"

https://www.qubes-os.org/doc/vpn/

I like having the iptables anti-leak rules. However, it's connecting 
automatically to my VPN providers destination that I downloaded their .ovpn for.

Is it possible to compile multiple locations and be able to select which one?

OR perhaps I'm going about this the wrong way? Should I instead use the GUI way 
via NetworkManager? Can I configure that for multiple destination choices then 
perhaps still add the iptables anti-leak rules?

What's the best way?

Thanks!



na, just make another NetVM  like you did for the one you got , or 2 3 
etc up to you ,  what i've been doing is after suspend  just start the 
new non active  VPN NetVM and use it  , after changing the appVMs using 
it ,  bit tedious  but works


--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/4cbc7529-7354-7298-f4e6-6986a6a8e914%40riseup.net.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Re: Can't get disposable VMs to work

2017-09-11 Thread zach . gangwer
On Sunday, October 2, 2016 at 8:45:57 PM UTC-7, Chris Mays wrote:
> I just installed Qubes OS for the first time today, and am having troubles 
> getting a disposable VM to run.  The system menu for Firefox and XTerm just 
> stall.  Is there something I am missing?
> 
> Regards

Bump for this, I have the same issue. Firefox and XTerm do not launch from 
menu, or from CLI inside an AppVM

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/2b4b2c0e-96da-4aa9-a6b9-e6daeb81516d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Best options for a 4.x compatible Dell workstation

2017-09-11 Thread pr0xy
On 2017-09-11 12:34, Gaijin wrote:
> On 2017-09-11 10:17, taii...@gmx.com wrote:
>> On 09/11/2017 05:45 AM, Gaijin wrote:
>>
>>> My company forces me to only buy Dell hardware. They're OK with me
>>> running Qubes on my next workstation, but I'm a bit unsure about what
>>> hardware options to choose, and would appreciate any advice.
>> That's pretty lame you can't build your own and get a real mans
>> computer - one that is owner controlled (ex: talos2, kcma-d8/kgpe-d16)
>>> Being uncertain of the Qubes 4.x requirements more than a year ago I put
>>> in a request for a Dell Precision T5810 workstation with:
>>> CPU: Xeon E5-2630 v4 (10 cores)
>>> RAM: 64GB 2400MHz DDR4 RDIMM ECC RAM
>>> Graphics: AMD FirePro W7100
>>>
>>> However, looking at the 4.x requirements page and some forum threads, it
>>> doesn't sound like AMD graphics cards are very Qubes-friendly. My only
>>> other option at this product level is an nVidia Quadro (or AMD Radeon).
>> Nonsense, as with any linux video driver issue it depends on how new
>> the hardware is.
>> The professional series card means you can contact AMD for skilled
>> tech support, I would also get Dell's ProSupport so that you can get
>> an american on the phone.
>>
>> Nvidia is unfriendly to open source and virtualization (on their
>> consumer devices) even more than AMD these days so I wouldn't, I for
>> one dislike recompiling the kernel every time I update an nvidia
>> computer running linux.
>>> I'd like to know if this looks like a good setup to proceed with, or if
>>> I should consider something else (within the Dell lineup/options).
>>>
>>> If I wanted to get a Xeon chip with the built-in Intel Graphics built in
>>> I could look at the Precision 3000 series where they offer machines with
>>> a Xeon E3-1275 with only 4 cores, and a maximum of 64GB RAM. Only
>>> problem there is that I run a lot of simultaneous Qubes, including
>>> Windows, so I was concerned that I couldn't expand the RAM on this
>>> machine in the future if necessary. I'll be stuck with this machine
>>> quite a while, so I wanted to make the most of this purchase.
>> 64gb is fine, if you want to save your (their?) money.
> 
> Yeah, I suggested some other hardware, but they wouldn't budge on that
> point, so I have to make do with Dell. I'll have to save the good stuff
> for the home build...
> 
> So you think I could get away with the AMD graphics card and the E5 Xeon
> setup? Or will I be saving myself a lot of hassle by going with the
> integrated Intel graphics on the slightly lower end processor?
> 
> Part of my motivation here is to hopefully have Qubes up and running on
> this machine without too much hassle...like recompiling kernels or
> spending tons of time with support.

Was wondering about this myself. Are the AMD graphics cards better than
nVidia?

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/d34f46ce865532f27d32f0714ad887d4%40riseup.net.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Getting Flash Player to work

2017-09-11 Thread Mark Eubanks
I finally got it to work in Firefox
I tried Chromium but it didn't work and still doesn't work in Chromium
Thanks

On Mon, Sep 11, 2017 at 7:31 PM pixel fairy  wrote:

> try installing google chrome. it has a built in flash engine that chromium
> doesnt come with
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "qubes-users" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/qubes-users/H4YcmUJz1wk/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> qubes-users+unsubscr...@googlegroups.com.
> To post to this group, send email to qubes-users@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/62127ea8-7219-4657-b5eb-653ca424f05f%40googlegroups.com
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CANn5qsB5vUO0bxJjP1Na%2B_2UdUXnjsPgxTQw9cuNVqkD2YJ_Bw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] HCL - Acer Aspire V5 471

2017-09-11 Thread Pedro Rodríguez de Oliveira
There is an issue with sys-net, as described by the user waiting-for-dev at
github.com/QubesOS/qubes-issues/issues/1393. The indicated fix solved it.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAD6w55bfF4KkzQXqzf_UwDRZo81AHBVOU3XN5rzCE73OXO%2B1_w%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Qubes-HCL-Acer-Aspire_V5_471-20120109-180241.yml
Description: application/yaml


Re: [qubes-users] Can't get disposable VMs to work

2017-09-11 Thread Selton
> I'm assuming this is 3.2.
You assume correct.

> What template are you using to create the DVMTemplate?
Currently fedora-25 (untouched from the qubes repo), I have tried fedor-24 and 
fedora-23 before as well as updated versions.

> Can you run a terminal in the DVMTemplate using 'qvm-run -a  xterm'?
This works and I do get in a terminal in the running fedora-25-dvm internal 
template without problems. But even with the dvm template running and the 
terminal open trying to start programs / open files in a disposal VM fails in 
the same way. Can I go any further from here / do some useful troubleshooting 
in the templates console? Thanks for your help!

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/faf5c3fb-c716-418d-8d4c-d572df3d7c94%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Can't get disposable VMs to work

2017-09-11 Thread Unman
On Sun, Sep 10, 2017 at 04:21:18PM -0700, Selton wrote:
> Am Dienstag, 4. Oktober 2016 18:53:36 UTC+2 schrieb cooloutac:
> > have you rebooted machine?  is it just the default firefox dispvm entry?  
> > What if you load a terminal from a vm,  then try to load an app in a vm 
> > with,   qvm-run '$dispvm'  appname
> 
> I have the exact same problem as OP. I recreated the DispVM multiple times 
> now and rebooted several times.
> The behaviour is the same for the Qubes start menu entry (DisposableVM -> 
> Firefox and xterm) as well as tries to cross load it either by the context 
> menu for a file or by qvm-run '$dispvm' xterm: I get a bubble msg in dom0 
> saying "Starting new DispVM..." and afterwards happens nothing. I could not 
> find any helpful log output so far, can you point me to some or give some 
> other tips? A disposable VM is quite an important feature... 
> 

I'm assuming this is 3.2.
What template are you using to create the DVMTemplate?
Can you run a terminal in the DVMTemplate using 'qvm-run -a 
xterm'?
If not, does the DVMTemplate start?
If it does, but the terminal doesnt appear, you can use 'sudo xl console
' in dom0 to connect to the running qube and see what the problem is.

unman

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/20170912003430.2ozwla4j5hi47dcr%40thirdeyesecurity.org.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Can't get disposable VMs to work

2017-09-11 Thread Selton
> make sure you delete all the old dvm's before creating a new one.  Show 
> internal vms in qubes manager and see if you have more then one.

Already did (I think this was mentioned before, if not here in another thread) 
and this is not the problem. There is only one dvm (which I also 
deleted/recreated several times with several different fedora versions).

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/1afc10be-9c7c-4084-b21c-e92de21ef2c5%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Getting Flash Player to work

2017-09-11 Thread pixel fairy
try installing google chrome. it has a built in flash engine that chromium 
doesnt come with

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/62127ea8-7219-4657-b5eb-653ca424f05f%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Re: VM Languages

2017-09-11 Thread Franz
On Mon, Sep 11, 2017 at 5:19 PM, Axel Schwoerer  wrote:

> Hello again.
> At first, thanks for your help for the languages, it works perfect for my
> vm like work, personal etc...
> But, when I create an other VM, my folder are not in french so I don't
> understand why it's not working.
> And when I go to the gnome center control on the template and on my new
> vm, it's written that it's in french...
>
>
Again do not top post and do not drop the mailing list.

Hmm  it seems strange. Try to reboot the computer

>
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAPzH-qC%3DqahNd4xhMC7YubV7od%3DzBpSjo_6J7QTBVz30NCC39Q%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Using a remove file from one VM as a block device in another VM

2017-09-11 Thread Nagaev Boris
Hey

I want to store VM data remotely. My plan is to have remote
private.img. I started with an attempt to attach a remote file mounted
with sshfs to another VM:

server$ dd if=/dev/zero of=image seek=1000 bs=1M count=0
vm1$ sshfs -o allow_root server: /tmp/server
dom0$ qvm-block -A vm2 vm1:/tmp/server/image

I expected to see /dev/xvdi in vm2 which I can use to make a partition
table, filesystems and mount locally. I did this successfully with
local (non-FUSE) files from vm1. But there is no /dev/xvdi in vm2 this
time. However Qubes VM Manager displays a drive icon in vm2 status.

Also I tried to loop mount the file locally in vm1 and mount the loop
device to vm2:

vm1$ sudo losetup -f --show /tmp/server/image
/dev/loop2
dom0$ qvm-block -A vm2 vm1:/dev/loop2

Also no success.

Does `qvm-block -A` support files coming from FUSE? What pitfalls can
I face going this way?

-- 
Best regards,
Boris Nagaev

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAFC_Vt4Lz5Ne%2Birnz5z6P%3DexPhvnv4FJrsjSfjj84jvfiW2mRw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] WindRiver Software users Q3 2017

2017-09-11 Thread Eric Smith
Hi,
Hope you're doing great. We are a global database provider and preferred 
partners for Enterprise, Media and Small size companies.
I am writing to you in regards to our recent list release, and check if you 
would be interested in acquiring our recently verified WindRiver Users list and 
other related Software users database.
WindRiver Users Include:

*  Intelligent Device Platform
*  Simics
*  Titanium Cloud
*  Tools
*  Virtualization
*  VxWorks
*  VxWorks 653
*  Wind River Helix CarSync
*  Wind River Helix Cockpit
*  Wind River Helix Device Cloud
*  Wind River Helix Drive
*  Wind River Linux
*  Wind River Pulsar Linux
*  Wind River Rocket
Market/Industry

*  Aerospace & Defense
*  Automotive
*  Industrial
*  Medical
*  Networking
Please let me know your thoughts, thanks for your time and we hope to hear from 
you soon.
--
Regards,
Eric Smith
Sr. Business Development



Disclaimer: We have clearly mentioned the source email id, also clearly 
mentioned the subject line and there is no misleading information of any form. 
We have found your email address through our marketing efforts on the web, if 
you are not interested, Please reply with "Remove" in the subject line and we 
will ensure that you do not receive any further promotional email from our end.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/BN6PR22MB05145EE94389F8CDE08B074FE8680%40BN6PR22MB0514.namprd22.prod.outlook.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Re: HOW TO compile templates from sources

2017-09-11 Thread nicholas roveda
Thank you, you saved me.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/971326ba-3d10-47f3-af5c-849fd66e672a%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Re: HOW TO compile templates from sources

2017-09-11 Thread Foppe de Haan
It sounds like you're doing it the hard way. Have you found 
https://www.qubes-os.org/doc/building-archlinux-template/ ?

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/e564d103-fec5-4c6d-a0e5-164d3b213a6a%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Re: HOW TO compile templates from sources

2017-09-11 Thread nicholas roveda
What do you mean by 'pick'?
This is the part I think it's not immediate.

Do the scripts download automatically the chosen version or I have to get the 
sources?

I've managed to find only the spec (config) files for Fedora and Debian for 
Qubes R3.1 and not for R3.2 or R4.0?
Do you know where I can find at least the necessary files for R3.2?

Can I start from the official rpms, make changes and then rebuild the packages?

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/2c0d00eb-4fe5-4a13-8c41-d59d2981fb7c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Additional VPN destinations via CLI config?

2017-09-11 Thread anguilla1980
I followed the tutorial here, specifically "Set up a ProxyVM as a VPN gateway 
using iptables and CLI scripts"

https://www.qubes-os.org/doc/vpn/

I like having the iptables anti-leak rules. However, it's connecting 
automatically to my VPN providers destination that I downloaded their .ovpn 
for. 

Is it possible to compile multiple locations and be able to select which one? 

OR perhaps I'm going about this the wrong way? Should I instead use the GUI way 
via NetworkManager? Can I configure that for multiple destination choices then 
perhaps still add the iptables anti-leak rules?

What's the best way?

Thanks! 

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/908ea3e1-a12d-4895-a124-eae05739498b%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Re: Windows HVM has network access, but claims there isn't

2017-09-11 Thread anguilla1980
On Saturday, September 9, 2017 at 7:18:56 AM UTC-7, Francesco wrote:
> Hello,
> 
> some strange behavior. on Windows HVM template as well as dependent VMs. In 
> all of them internet is working. I am sure of that because:
> 1. on cmd pinging google or amazon works
> 2. a banking application is able to connect and operate
> 
> but the icon on the system tray states: identifying... no network access
> 
> worse amazon Kindle for PC believes that and is unable to connect.
> 
> So I wonder if there is a way to tell the system tray that internet is 
> already connected. Maybe that after that also Kindle will understand that.
> 
> 
> If I click on the system tray there are lots of options, but all seem 
> directed to create a new connection: wireless, dial-up, router etc, not to 
> join an existing connection.
> 
> 
> Hope there is an easy answer... Thanks
> Best
> Fran

If I recall, the current release notes for windows-tools says that the system 
tray icon will show no network even tho there is and it works. It is like this 
for me and I just accept it. 

If someone works out a workaround, cool. But currently, this is expected 
behaviour. 

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/44698e09-33c5-4a1f-b280-61157c6519f0%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Re: HOW TO compile templates from sources

2017-09-11 Thread Foppe de Haan
The arch build doc should be up to date, follow that, then pick the templates 
you're interested in. :)

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/e55678db-0237-4f54-a063-8af9d1a2ae0f%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] trying to setup VPN on NetVM, can't connect and no error

2017-09-11 Thread André Borud
I'm trying to setup a vpn in the NetVM by importing .ovpn settings. The import 
of settings is successful and adds the newly imported VPN to the list of 
possible VPNs to connect to. But when clicking on one to connect I get a little 
message saying its not possible to connect almost the same instance, like it 
actually didn't try to connect. 

These are the settings I'm trying to use:

client
dev tun
proto udp
remote ***-a05.*.com 443
resolv-retry infinite
nobind
persist-key
persist-tun
persist-remote-ip
ca ca.**.com.crt
verify-x509-name ***-a05.*.com name
auth-user-pass
comp-lzo
verb 3
auth SHA256
cipher AES-256-CBC
keysize 256
tls-cipher 
TLS-DHE-RSA-WITH-AES-256-CBC-SHA:TLS-DHE-DSS-WITH-AES-256-CBC-SHA:TLS-RSA-WITH-AES-256-CBC-SHA


and then I use a username and password.

Is there a way to see an error message or something atleast to fix whatever the 
problem is?

Using QubesOS 3.2 on an Intel NUC i7.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/77caa315-f596-4be0-9619-c9e45cd669a7%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Can't get disposable VMs to work

2017-09-11 Thread cooloutac
On Sunday, September 10, 2017 at 7:21:19 PM UTC-4, Selton wrote:
> Am Dienstag, 4. Oktober 2016 18:53:36 UTC+2 schrieb cooloutac:
> > have you rebooted machine?  is it just the default firefox dispvm entry?  
> > What if you load a terminal from a vm,  then try to load an app in a vm 
> > with,   qvm-run '$dispvm'  appname
> 
> I have the exact same problem as OP. I recreated the DispVM multiple times 
> now and rebooted several times.
> The behaviour is the same for the Qubes start menu entry (DisposableVM -> 
> Firefox and xterm) as well as tries to cross load it either by the context 
> menu for a file or by qvm-run '$dispvm' xterm: I get a bubble msg in dom0 
> saying "Starting new DispVM..." and afterwards happens nothing. I could not 
> find any helpful log output so far, can you point me to some or give some 
> other tips? A disposable VM is quite an important feature...

make sure you delete all the old dvm's before creating a new one.  Show 
internal vms in qubes manager and see if you have more then one.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/52b04d04-9a34-481d-b07a-a6d9b97a8c96%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Best options for a 4.x compatible Dell workstation

2017-09-11 Thread Gaijin
On 2017-09-11 10:17, taii...@gmx.com wrote:
> On 09/11/2017 05:45 AM, Gaijin wrote:
> 
>> My company forces me to only buy Dell hardware. They're OK with me
>> running Qubes on my next workstation, but I'm a bit unsure about what
>> hardware options to choose, and would appreciate any advice.
> That's pretty lame you can't build your own and get a real mans
> computer - one that is owner controlled (ex: talos2, kcma-d8/kgpe-d16)
>> Being uncertain of the Qubes 4.x requirements more than a year ago I put
>> in a request for a Dell Precision T5810 workstation with:
>> CPU: Xeon E5-2630 v4 (10 cores)
>> RAM: 64GB 2400MHz DDR4 RDIMM ECC RAM
>> Graphics: AMD FirePro W7100
>>
>> However, looking at the 4.x requirements page and some forum threads, it
>> doesn't sound like AMD graphics cards are very Qubes-friendly. My only
>> other option at this product level is an nVidia Quadro (or AMD Radeon).
> Nonsense, as with any linux video driver issue it depends on how new
> the hardware is.
> The professional series card means you can contact AMD for skilled
> tech support, I would also get Dell's ProSupport so that you can get
> an american on the phone.
> 
> Nvidia is unfriendly to open source and virtualization (on their
> consumer devices) even more than AMD these days so I wouldn't, I for
> one dislike recompiling the kernel every time I update an nvidia
> computer running linux.
>> I'd like to know if this looks like a good setup to proceed with, or if
>> I should consider something else (within the Dell lineup/options).
>>
>> If I wanted to get a Xeon chip with the built-in Intel Graphics built in
>> I could look at the Precision 3000 series where they offer machines with
>> a Xeon E3-1275 with only 4 cores, and a maximum of 64GB RAM. Only
>> problem there is that I run a lot of simultaneous Qubes, including
>> Windows, so I was concerned that I couldn't expand the RAM on this
>> machine in the future if necessary. I'll be stuck with this machine
>> quite a while, so I wanted to make the most of this purchase.
> 64gb is fine, if you want to save your (their?) money.

Yeah, I suggested some other hardware, but they wouldn't budge on that
point, so I have to make do with Dell. I'll have to save the good stuff
for the home build...

So you think I could get away with the AMD graphics card and the E5 Xeon
setup? Or will I be saving myself a lot of hassle by going with the
integrated Intel graphics on the slightly lower end processor?

Part of my motivation here is to hopefully have Qubes up and running on
this machine without too much hassle...like recompiling kernels or
spending tons of time with support.


-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/e81f4f03f5c9193f12ebe2eb7a114d5f%40riseup.net.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] HOW TO compile templates from sources

2017-09-11 Thread nicholas roveda
I've tried to figure out something reading the docs, but it seems to me there 
are more infos about how to compile a template based on a new system rather 
than a Fedora or Debian one.

I wanted to try with the minimal flavour of fedora 25 and Debian 9.

Can someone guide me through the entire process and tell me if its possible to 
start from the official rpms too, to make some custom changes?

Thanks guys.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/679642c7-703a-47de-8907-6e5124f61abe%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Best options for a 4.x compatible Dell workstation

2017-09-11 Thread taii...@gmx.com

On 09/11/2017 05:45 AM, Gaijin wrote:


My company forces me to only buy Dell hardware. They're OK with me
running Qubes on my next workstation, but I'm a bit unsure about what
hardware options to choose, and would appreciate any advice.
That's pretty lame you can't build your own and get a real mans computer 
- one that is owner controlled (ex: talos2, kcma-d8/kgpe-d16)

Being uncertain of the Qubes 4.x requirements more than a year ago I put
in a request for a Dell Precision T5810 workstation with:
CPU: Xeon E5-2630 v4 (10 cores)
RAM: 64GB 2400MHz DDR4 RDIMM ECC RAM
Graphics: AMD FirePro W7100

However, looking at the 4.x requirements page and some forum threads, it
doesn't sound like AMD graphics cards are very Qubes-friendly. My only
other option at this product level is an nVidia Quadro (or AMD Radeon).
Nonsense, as with any linux video driver issue it depends on how new the 
hardware is.
The professional series card means you can contact AMD for skilled tech 
support, I would also get Dell's ProSupport so that you can get an 
american on the phone.


Nvidia is unfriendly to open source and virtualization (on their 
consumer devices) even more than AMD these days so I wouldn't, I for one 
dislike recompiling the kernel every time I update an nvidia computer 
running linux.

I'd like to know if this looks like a good setup to proceed with, or if
I should consider something else (within the Dell lineup/options).

If I wanted to get a Xeon chip with the built-in Intel Graphics built in
I could look at the Precision 3000 series where they offer machines with
a Xeon E3-1275 with only 4 cores, and a maximum of 64GB RAM. Only
problem there is that I run a lot of simultaneous Qubes, including
Windows, so I was concerned that I couldn't expand the RAM on this
machine in the future if necessary. I'll be stuck with this machine
quite a while, so I wanted to make the most of this purchase.

64gb is fine, if you want to save your (their?) money.

--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/7d035224-af41-be61-6244-e0827081ee15%40gmx.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Re: Windows HVM has network access, but claims there isn't

2017-09-11 Thread Franz
> On 10 September 2017 at 23:57, Franz <169...@gmail.com> wrote:
>
>>
>>
>> On Sun, Sep 10, 2017 at 12:42 PM, Hugo Costa 
>> wrote:
>>
>>> On Saturday, 9 September 2017 15:18:56 UTC+1, Francesco  wrote:
>>> > Hello,
>>> >
>>> > some strange behavior. on Windows HVM template as well as dependent
>>> VMs. In all of them internet is working. I am sure of that because:
>>> > 1. on cmd pinging google or amazon works
>>> > 2. a banking application is able to connect and operate
>>> >
>>> > but the icon on the system tray states: identifying... no network
>>> access
>>> >
>>> > worse amazon Kindle for PC believes that and is unable to connect.
>>> >
>>> > So I wonder if there is a way to tell the system tray that internet is
>>> already connected. Maybe that after that also Kindle will understand that.
>>> >
>>> >
>>> > If I click on the system tray there are lots of options, but all seem
>>> directed to create a new connection: wireless, dial-up, router etc, not to
>>> join an existing connection.
>>> >
>>> >
>>> > Hope there is an easy answer... Thanks
>>> > Best
>>> > Fran
>>>
>>> Make sure to configure everything by hand. So, go to the properties of
>>> your ethernet connection in Windows, IPv4 and make sure to use the IP
>>> address, subnet mask and default gateway you can find in the settings of
>>> the VM. Restart and it should work.
>>>
>>>
>> Tried that, and it works. Many thanks,  but it does not keep the new
>> settings. After reboot  all fields are empty and again no network.
>>
>


On Mon, Sep 11, 2017 at 6:53 AM, Hugo Costa  wrote:
That's odd. You have already installed Qubes Tools too, correct? I remember
doing that once and having the profile resetted, but still working.

Thanks, it does not work in the template, but still works in dependent
applVMs. That is enough.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAPzH-qCjXypEJcyc9i%2BakdSyA7qrDTghOYNhRs8Q%3D04nO7ZG7g%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Change language of application/VM

2017-09-11 Thread Franz
On Mon, Sep 11, 2017 at 5:13 AM, Axel Schwoerer  wrote:

> Thanks Franz.
> And for Fedora how I proceed? I've never been on a Fedora/Red Hast
> Distribution.
> Then, can you tell me what commands should I run for the template and dom0
> for complete the installation?
> I mean, apt-get update, apt-get upgrade etc.
>

Please do not top-reply and do not drop the qubes-users ML
here is the tutorial to update
https://www.qubes-os.org/doc/software-update-vm/
but you can use also the GUI on Qubes Manager

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAPzH-qCcGbKV5aE6drwW%2BHO%3Dk7g6HkQDjs%2BqQ7PGM4Tv%2BmhvUA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Re: Windows HVM has network access, but claims there isn't

2017-09-11 Thread Hugo Costa
That's odd. You have already installed Qubes Tools too, correct? I remember
doing that once and having the profile resetted, but still working.

On 10 September 2017 at 23:57, Franz <169...@gmail.com> wrote:

>
>
> On Sun, Sep 10, 2017 at 12:42 PM, Hugo Costa  wrote:
>
>> On Saturday, 9 September 2017 15:18:56 UTC+1, Francesco  wrote:
>> > Hello,
>> >
>> > some strange behavior. on Windows HVM template as well as dependent
>> VMs. In all of them internet is working. I am sure of that because:
>> > 1. on cmd pinging google or amazon works
>> > 2. a banking application is able to connect and operate
>> >
>> > but the icon on the system tray states: identifying... no network access
>> >
>> > worse amazon Kindle for PC believes that and is unable to connect.
>> >
>> > So I wonder if there is a way to tell the system tray that internet is
>> already connected. Maybe that after that also Kindle will understand that.
>> >
>> >
>> > If I click on the system tray there are lots of options, but all seem
>> directed to create a new connection: wireless, dial-up, router etc, not to
>> join an existing connection.
>> >
>> >
>> > Hope there is an easy answer... Thanks
>> > Best
>> > Fran
>>
>> Make sure to configure everything by hand. So, go to the properties of
>> your ethernet connection in Windows, IPv4 and make sure to use the IP
>> address, subnet mask and default gateway you can find in the settings of
>> the VM. Restart and it should work.
>>
>>
> Tried that, and it works. Many thanks,  but it does not keep the new
> settings. After reboot  all fields are empty and again no network.
>
>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "qubes-users" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to qubes-users+unsubscr...@googlegroups.com.
>> To post to this group, send email to qubes-users@googlegroups.com.
>> To view this discussion on the web visit https://groups.google.com/d/ms
>> gid/qubes-users/1a94286d-f839-467f-a485-e38240359008%40googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>>
>
>


-- 
Hugo Costa

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABzYznyAQTnHL-pToF-1XZ1Tr1FN9yWkMU3GK3h2ZHBmahYgGw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Best options for a 4.x compatible Dell workstation

2017-09-11 Thread Gaijin
My company forces me to only buy Dell hardware. They're OK with me
running Qubes on my next workstation, but I'm a bit unsure about what
hardware options to choose, and would appreciate any advice. 

Being uncertain of the Qubes 4.x requirements more than a year ago I put
in a request for a Dell Precision T5810 workstation with:
CPU: Xeon E5-2630 v4 (10 cores)
RAM: 64GB 2400MHz DDR4 RDIMM ECC RAM
Graphics: AMD FirePro W7100

However, looking at the 4.x requirements page and some forum threads, it
doesn't sound like AMD graphics cards are very Qubes-friendly. My only
other option at this product level is an nVidia Quadro (or AMD Radeon).

I'd like to know if this looks like a good setup to proceed with, or if
I should consider something else (within the Dell lineup/options).

If I wanted to get a Xeon chip with the built-in Intel Graphics built in
I could look at the Precision 3000 series where they offer machines with
a Xeon E3-1275 with only 4 cores, and a maximum of 64GB RAM. Only
problem there is that I run a lot of simultaneous Qubes, including
Windows, so I was concerned that I couldn't expand the RAM on this
machine in the future if necessary. I'll be stuck with this machine
quite a while, so I wanted to make the most of this purchase.

Should I stick with my original configuration, or would you suggest
other options? I really want a machine that will be 4.x compatible, that
would have the least potential hardware issues.

I'm not doing video editing or gaming, but I run a lot of VMs at the
same time that might be memory hungry.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/758ab18f99365c9f2d4b5b8317d17b63%40riseup.net.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Re: Debian 9 templates

2017-09-11 Thread Johannes Graumann
On Sun, 2017-09-10 at 23:19 +0200, cubit wrote:
> 22. Jun 2017 12:37 by cu...@tutanota.com:
> 
> > Is there existing any pre-made templates for Debian 9?
> 
> 
> Halo 
> 
> Is there any news on Debian 9 template?   
> 
> Can also someone remind we the URL to check which templates are
> installable, not /docs but there was a URL to the folder/repo with
> all the templates for download
> 

https://ftp.qubes-os.org/repo/yum/r4.0/templates-itl/rpm/

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/1505115993.4852.4.camel%40graumannschaft.org.
For more options, visit https://groups.google.com/d/optout.