[qubes-users] Installation security : Usb optical vs sata optical vs usb drive

2018-01-01 Thread mmm648
So from the installation security guide I read the following: "Use a USB optical drive. Attach a SATA optical drive to a secondary SATA controller, then assign this secondary SATA controller to an AppVM." And for USB Drive: "Untrustworthy firmware. (Firmware can be malicious even if the drive is

Re: [qubes-users] How find out addresses to limit outgoing connections

2018-01-01 Thread Andrew David Wong
-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 On 2017-12-29 21:55, Stumpy wrote: > I read some posts about firewalls etc but haven't been able to > find/limit outgoing connections. I have tried to add domains which > seems to have worked (minus a bug or two) but I can't seem to > figure out

[qubes-users] How find out addresses to limit outgoing connections

2018-01-01 Thread Stumpy
I read some posts about firewalls etc but haven't been able to find/limit outgoing connections. I have tried to add domains which seems to have worked (minus a bug or two) but I can't seem to figure out all the domains I need to list. example, I use a gmail account, I tried adding say

[qubes-users] Qubes 3.2 GRUB menu not shown after boot

2018-01-01 Thread Robert F.
Hello, Just installed Qubes 3.2 on a Lenovo ThinkPad Y700. It tried about 4 times and the SSD hard drive where I installed was not seen as UEFI bootable. I went to uefi troubleshoot page, followed the steps there (add mabps, noexitboot on kernel lines) plus creating the /boot/efi/EFI/BOOT folder

Re: [qubes-users] Help verifying install files: how to verify the Release 3 Signing Key?

2018-01-01 Thread Andrew David Wong
-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 On 2018-01-01 10:44, Kyle Breneman wrote: > I have successfully verified the fingerprint for the Qubes Master > Signing Key. I have verified the Release 3 ISO signature using > the Qubes Release 3 Signing Key. How do I verify that the Release > 3

Re: [qubes-users] Help verifying install files: how to verify the Release 3 Signing Key?

2018-01-01 Thread Chris Laprise
On 01/01/2018 11:44 AM, Kyle Breneman wrote: I have successfully verified the fingerprint for the Qubes Master Signing Key. I have verified the Release 3 ISO signature using the Qubes Release 3 Signing Key. How do I verify that the Release 3 signing key is good? Do I somehow use the Qubes

Re: [qubes-users] Detached LUKS header

2018-01-01 Thread Andrew David Wong
-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 On 2018-01-01 11:14, spi...@gmail.com wrote: >> I haven't personally tried it, but I can't immediately think of >> anything preventing it. You won't be able to do it via the GUI >> installer, but you should be able to do it from the command-line.

[qubes-users] How to add Web-Shortcut to Menu of an AppVM

2018-01-01 Thread '[799]' via qubes-users
Hello, I would like to enter a new menu item to the Appmenu of a Fedora 25 based AppVM. The menu should contain a link to our corporate Mailserver (https:///owa). I have thereof installed "menulibre" (sudo yum -y install menulibre) and created a new desktop entry under the Office Section, but

[qubes-users] Re: Install Rtlwifi new

2018-01-01 Thread davidmizr2015
thanks What I do is to open the terminal and folow the steps that you can see here, https://akshaycv006.wordpress.com/2017/01/12/installing-realtek-rtl8723be-driver-for-ubuntu-debian-or-fedora/, I try in ubuntu and works good. -- You received this message because you are subscribed to the

[qubes-users] Re: Install Rtlwifi new

2018-01-01 Thread davidmizr2015
On Sunday, December 31, 2017 at 11:39:43 AM UTC-7, davidm...@gmail.com wrote: > Hi, I'm tring to istall the RTlwifi new driver in "sys-net", you can see the > driver here, "https://github.com/lwfinger/rtlwifi_new;, I have to install > this driver using "SUDO MAKE" and "SUDO MAKE INSTALL", sudo

[qubes-users] Running rkt containers directly on zen?

2018-01-01 Thread Naja Melan
Hi, While searching on the internet I stumbled onto this: https://github.com/rkt/stage1-xen Would this work on qubes? Anyone already doing it? Also found some stuff about rumprun unikernels allowing directly running any posix app on xen. It seems awfully quiet about such initiatives, which

Re: [qubes-users] Detached LUKS header

2018-01-01 Thread spiegs
> I haven't personally tried it, but I can't immediately think of > anything preventing it. You won't be able to do it via the GUI > installer, but you should be able to do it from the command-line. I > suggest taking inspiration from here: > > https://www.qubes-os.org/doc/custom-install/ > > -

[qubes-users] Help verifying install files: how to verify the Release 3 Signing Key?

2018-01-01 Thread Kyle Breneman
I have successfully verified the fingerprint for the Qubes Master Signing Key. I have verified the Release 3 ISO signature using the Qubes Release 3 Signing Key. How do I verify that the Release 3 signing key is good? Do I somehow use the Qubes Master Signing Key to verify the authenticity of

Re: [qubes-users] cannot remove/create VM exists and doesn't exist

2018-01-01 Thread 'awokd' via qubes-users
On Mon, January 1, 2018 1:44 pm, Lorenzo Guerra wrote: > Mine is just a guess: have you tried with something like 'virsh -c > xen:/// undefine win7' and then, if some references to your vm remains in > qubes.xml or the Application menus, manually remove them? Sounds like that worked for Max.

Re: [qubes-users] cannot remove/create VM exists and doesn't exist

2018-01-01 Thread Lorenzo Guerra
Mine is just a guess: have you tried with something like 'virsh -c xen:/// undefine win7' and then, if some references to your vm remains in qubes.xml or the Application menus, manually remove them? -- You received this message because you are subscribed to the Google Groups "qubes-users"

Re: [qubes-users] cannot remove/create VM exists and doesn't exist [SOLVED]

2018-01-01 Thread 'Max Andersen' via qubes-users
On 01/01/2018 01:40 PM, Max Andersen wrote: > > On 01/01/2018 11:52 AM, awokd wrote: >> On Mon, January 1, 2018 10:41 am, Max Andersen wrote: >>> Hi awokd >>> >>> Den 1. jan. 2018 kl. 11.32 skrev awokd : > On Mon, January 1, 2018 4:36 am, 'Max Andersen'

Re: [qubes-users] Re: Install Rtlwifi new

2018-01-01 Thread 'Tom Zander' via qubes-users
On Sunday, 31 December 2017 20:57:36 GMT davidmizr2...@gmail.com wrote: > I can see e permission problem here > "/net/wireless/realtek/rtlwifi/rtl_pci.ko' Read-only file system, That is not a permission problem. Nobody can write to a read-only filesystem. Try to make sure that you configured

Re: [qubes-users] cannot remove/create VM exists and doesn't exist

2018-01-01 Thread 'Max Andersen' via qubes-users
On 01/01/2018 11:52 AM, awokd wrote: > On Mon, January 1, 2018 10:41 am, Max Andersen wrote: >> Hi awokd >> >> >>> Den 1. jan. 2018 kl. 11.32 skrev awokd : >>> >>> On Mon, January 1, 2018 4:36 am, 'Max Andersen' via qubes-users wrote:

Re: [qubes-users] cannot remove/create VM exists and doesn't exist

2018-01-01 Thread 'awokd' via qubes-users
On Mon, January 1, 2018 10:41 am, Max Andersen wrote: > Hi awokd > > >> Den 1. jan. 2018 kl. 11.32 skrev awokd : >> >> >>> On Mon, January 1, 2018 4:36 am, 'Max Andersen' via qubes-users >>> wrote: >>> >>> >>> >>> libvirtError: operation failed: domain 'win7' already exists

Re: [qubes-users] cannot remove/create VM exists and doesn't exist

2018-01-01 Thread 'Max Andersen' via qubes-users
Hi awokd > Den 1. jan. 2018 kl. 11.32 skrev awokd : > >> On Mon, January 1, 2018 4:36 am, 'Max Andersen' via qubes-users wrote: >> >> >> libvirtError: operation failed: domain 'win7' already exists with uuid >> > > Sometimes a reboot clears up discrepancies like that

Re: [qubes-users] cannot remove/create VM exists and doesn't exist

2018-01-01 Thread 'awokd' via qubes-users
On Mon, January 1, 2018 4:36 am, 'Max Andersen' via qubes-users wrote: > > libvirtError: operation failed: domain 'win7' already exists with uuid > Sometimes a reboot clears up discrepancies like that for me. -- You received this message because you are subscribed to the Google Groups

Re: [qubes-users] Qubes freezing (hangs) always in less than 1 hour

2018-01-01 Thread 'awokd' via qubes-users
On Sun, December 31, 2017 8:31 pm, Sameer Vao wrote: > freezes completely (hangs) normally within 15 minutes after booting, > needing a hard reboot. Theres no specific thing - sometimes moving the If you haven't already, try running "sudo qubes-dom0-update" as soon as you get in to Qubes. --