[Re-titling this sub-thread]
On Tue, February 6, 2018 11:12 am, 'Tom Zander' via qubes-users wrote:
> On Tuesday, 6 February 2018 11:32:07 CET 'awokd' via qubes-users wrote:
>
>> I'm not getting past the first step of:
>>
>>
>> Verify you are cutting through the
On Mon, February 5, 2018 6:18 pm, 'awokd' via qubes-users wrote:
> On Mon, February 5, 2018 6:01 pm, 'Tom Zander' via qubes-users wrote:
>> If someone can figure out how to port-forward in 4.0, please do update
>> the docs. I never managed to get that working.
I see what you me
On Sat, February 3, 2018 2:49 pm, ThierryIT wrote:
> Attached device seems to work as it should be when this is a mass usb
> storage ... Is there any thing special to install on sys-usb or targeting
> VM for Yubikey ?
Check out https://github.com/QubesOS/qubes-issues/issues/3525. Think you
On Sat, February 3, 2018 8:19 pm, Yuraeitha wrote:
> So as a basis you can use LegacyBOOS with Grub, and then point the Grub
> menu for Windows to UEFI/EFI boot, even though you're on LegacyBIOS
> initially. I don't remember the exact command-line in Grub, but it should
> be somewhat easy to do
On Sun, February 4, 2018 1:16 am, Tim W wrote:
> Has anyone accomplished a clean build?
I've successfuly built 4.0rc3 in a Fedora 26 VM with the following installed:
sudo dnf install git createrepo rpm-build make wget rpmdevtools dialog
rpm-sign gnupg dpkg-dev debootstrap python2-sh
I used the
On Tue, February 6, 2018 11:09 pm, Alex Dubois wrote:
> I do not address the main part because I believe there is a bug with
> /rw/config/qubes-firewall-user-script not triggering on network change
> that I want to report and get an understanding on how it will be
> addressed.
This one?
On Tue, February 6, 2018 10:47 pm, Unman wrote:
> On Tue, Feb 06, 2018 at 02:27:57PM -0800, Alchemist wrote:
>
>> On Tuesday, February 6, 2018 at 5:15:34 PM UTC-5, Unman wrote:
>>
>>> On Tue, Feb 06, 2018 at 02:02:47PM -0800, Alchemist wrote:
>>>
So I follow the build guide instructions, I
On Wed, February 7, 2018 3:28 am, dbr287 wrote:
> I've installed rc4 on G505S with Coreboot (legacy bios). Installation
> went ok (found iommu and interrupt remapping just fine).
>
> On 1st (gui) boot, I've tried all the combinations selecting 1) create
> ServiceVMs, AppVMs, 2) only ServiceVMs, 3)
On Mon, February 5, 2018 9:39 pm, Utility Panel wrote:
> Ah. I hadn't considered the Coreboot option. My understanding is that the
> chipset is at fault.
>
> The only documentation I've found was forwarded to me from another user
> on this list. It explains a solution that Zen recommended for
On Mon, February 12, 2018 11:21 am, frankenstein91.info via qubes-users
wrote:
> Thank you for the first help. Do you know a good howto for the intel
> firmware thing?
Look at the entry for "NetVM (extra firmware)" in
https://www.qubes-os.org/doc/templates/fedora-minimal/ .
> Do you know how i
On Mon, February 12, 2018 2:22 pm, frankenstein91.info via qubes-users wrote:
> Am Montag, 12. Februar 2018 12:54:55 UTC+1 schrieb awokd:
>
>> - contact your manufacturer and ask them to send you an updated EFI
>> image that allocates devices properly so your SD reader stays on 04:00.0
>> and NIC
On Mon, February 12, 2018 3:24 pm, Trjkel wrote:
> Hello ! is there any way i can add an option to right click any link when
> browsing in any vm and open it in disposable vm thank you !
If my memory is right, someone wrote an addon for Firefox and Chrome that
allows this. Was going to try it out
On Mon, February 12, 2018 5:38 pm, Chris Laprise wrote:
> I think the wiki needs to be updated with info about using VM internal
> kernel. On R3.2 see
> https://www.qubes-os.org/doc/managing-vm-kernel/#using-kernel-installed-i
> n-the-vm
>
> On R4.0 you should only need to set kernel to blank:
>
On Mon, February 12, 2018 4:02 pm, Johannes Graumann wrote:
> On Fri, 2018-02-09 at 08:11 +, Johannes Graumann wrote:
>
>> Hello,
>> Trying to purge all fedora 25 traces (aside from dom0) from my
>> system. I have started to work my way through the dependencies following
>> this workflow:
>>
On Mon, February 12, 2018 5:20 pm, Mr F wrote:
> Using a Lenovo Yoga 720.
>
> None of them work and the system halts showing the attached screen.
Check here. It's for R3.2 but might help. Skip the part about updating the
kernel, 4.0 already has it.
On Sun, February 11, 2018 11:24 am, eerst...@gmail.com wrote:
> Dear all,
>
>
> At Qubes RC4 installation, I've selected: whonix + update through whonix
> but lost the ability to update software on templates after whonix
> removal.
>
> After the installation, I've changed:
> a) UpdateVM
On Sun, February 11, 2018 12:01 pm, Yuraeitha wrote:
> Quote:
> "Why is full screen mode potentially dangerous?
> If one allowed one of the VMs to “own” the full screen, e.g. to show a
> movie on a full screen, it might not be possible for the user to know if
> the applications/VM really
On Sun, February 11, 2018 11:04 pm, '[799]' via qubes-users wrote:
> Unfortunately the VM is not booting into the ISO.
https://www.qubes-os.org/faq/#users
Bottom of user section
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe
On Tue, February 13, 2018 11:32 am, xxx.l...@gmail.com wrote:
> Thank you for your help awokd, I now have sys-net running in HVM mode on
> the XPS 9350 wifi card in permissive mode, this resolve the issue on 4.0.
Glad it worked out! But consider getting a different wifi card some day
that doesn't
On Tue, February 13, 2018 6:36 pm, qtpie wrote:
> Summary: fixing LVM corruption, question about LVM locking
> Questions:
> - what is the standard LVM locking type for a Qubes install? (in Fedora
> it is 1). - if not 1 should I change it back?
On my fresh install of rc4, it's set to 1. Per the
On Tue, February 13, 2018 6:32 pm, Steve Coleman wrote:
> I have a strange situation where my sys-net's software template
> "fedora-26-net" (variant of fedora-minimal) does not appear to be
> providing updated OS images. My sys-net is the only vm using this specific
> image.
Are you running low
On Fri, February 9, 2018 5:32 pm, Konstantin Ryabitsev wrote:
> If you are trying to use mutt with the default Fedora-26 template and
> can't figure out why authenticated smtp sending is giving you a "No
> Authenticators Available" error, you need to install cyrus-sasl-plain.
>
>
> Drove me
On Fri, February 9, 2018 11:19 am, Alex Dubois wrote:
>
Submitted https://github.com/QubesOS/qubes-doc/pull/577 for adding it to
the FAQ.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails
On Fri, February 9, 2018 12:33 pm, frankenstein91.info via qubes-users wrote:
> i would like t use a older notebook for qubes os. But i can't get WiFi
> working and Ethernet only if the net-VW has the SD-card-reader
> coonnected.
>
> ubuntu@ubuntu:~$ sudo lspci
> 03:00.0 Network controller:
On Tue, January 30, 2018 4:54 pm, rob_66 wrote:
> Hello.
>
>
> So, I received Xen packages, version 4.6.6-36, via dom0
> --enablerepo=qubes-dom0-security-testing.
>
>
> I changed 1) the (xscreensaver) password and 2) LUKS passphrase.
>
>
> Now the questions:
>
>
> Can I start with 3) disk
On Mon, February 5, 2018 6:01 pm, 'Tom Zander' via qubes-users wrote:
> On Monday, 5 February 2018 04:34:35 CET Tim W wrote:
>
>> People complain about doc being outdated..then fix them.
>>
>
> If someone can figure out how to port-forward in 4.0, please do update
> the docs. I never managed
https://github.com/QubesOS/qubes-issues/issues/3553
Like the title says, Debian based UpdateVM does not support --action=list
or reinstall. Error message says:
ERROR: yum version installed in VM host does not suppport --downloadonly
option
ERROR: only 'install' and 'upgrade' actions supported
On Wed, February 7, 2018 9:03 am, Davit Barbakadze wrote:
> Sorry, but what's PV mode?
>
>
> On Sunday, February 4, 2018 at 7:49:19 AM UTC+4, xxx@gmail.com wrote:
>
>> Yes I stil have the permissive mode on 3a:00.0
PV is ParaVirtual mode. It's OK for testing, but in R4.0 you want to use
PVH
On Sat, February 17, 2018 2:30 am, pixel fairy wrote:
> On Friday, February 16, 2018 at 4:07:10 PM UTC-8, Marek
> Marczykowski-Górecki wrote:
>
>
>> Yes, there is "xpti=false" option for Xen command line (xen.gz option
>> in grub, or options= line in xen.cfg for UEFI).
>
> tried that by editing
On Fri, February 16, 2018 10:37 am, nunotmalhe...@gmail.com wrote:
> Hi!
> Followed the trim tutorial in https://www.qubes-os.org/doc/disk-trim/
> My computer boots through efi, so I did:
>
>
> 1) set issue_discards = 1 in /etc/lvm/lvm.conf
> 2) added discard to the end of the luks entry in
On Thu, February 15, 2018 2:24 am, pixel fairy wrote:
> at first i thought it was just the
> performance hit from mitigating speculation vulnerabilities, but others
> were reporting better performance in rc4 than rc3.
Maybe they are on AMD. :)
To rule out mitigations, I know Linux has an option
On Fri, February 16, 2018 7:09 am, Michael MENG wrote:
> Hi,
> My hp laptop work perfectly on qubes 3.2, i want to install qubes 4rc4,
> However, it is no display when boot on usb. Is there any idea to fix
> this? Thanks.
What model HP? What kind of video hardware? How far does it get? Try
On Wed, February 14, 2018 5:36 pm, brendan.h...@gmail.com wrote:
> On Wednesday, February 14, 2018 at 5:33:03 AM UTC-5, sebuq wrote:
>
>> The virgin whonix templates issue with official Qubes R4 rc4 downloads
>> did not result in errors via whonixcheck. However after updating the
>> whonix-gw
On Sat, February 17, 2018 3:54 pm, snowboard...@gmail.com wrote:
> running qubes 3.2
>
> I am following default instructions from Archlinux.Tried to build
> template for trusty.
>
> I cloned the default repo.
>
>
> there is a problem with python2 because in fedora 23 there is no such
> package. I
On Fri, February 16, 2018 5:05 pm, awokd wrote:
> And if I'm missing some other reason that dracut -H should be included,
> please let me know! Might make sense to remove it from the GRUB section as
> well.
Found this which seems like it might be related:
On Sat, February 17, 2018 10:11 pm, '[799]' via qubes-users wrote:
> xclip -selection clipboard -t image/png
> /home/user/QubesIncoming/dom0/qvm-screenshot-to-clipboard.png
Can't really find a man page for xclip. What happens when you run this in
dom0?
qvm-run $MyAppVM 'xclip -t image/png
On Wed, February 21, 2018 8:21 am, ThierryIT wrote:
> Hi,
>
>
> After having restored Linux VM from Qubes 3.2, this VM base on fedora
> template doesn't reach the network. In the same time, I am now using Qubes
> 4rc4, same problem.
> I only have this problem with this VM,all other VMs from my 3.2
On Wed, February 21, 2018 9:28 am, ThierryIT wrote:
> Le mercredi 21 février 2018 11:13:55 UTC+2, awokd a écrit :
>> OK, then go into Settings on your problem AppVM and change both the
>> Template and NetVM to some other value and hit OK. Then, go back into
>> Settings and change them back to the
On Tue, February 20, 2018 5:09 pm, Demi M. Obenour wrote:
> I use GMail and Thunderbird for email, and Firefox as my browser. I do
> email and GitHub from a different domain that is more trusted than others
> (it’s blue).
>
>
> I would love to restrict its networking abilities by using firewall
>
On Wed, February 21, 2018 11:18 am, ThierryIT wrote:
> Le mercredi 21 février 2018 12:31:29 UTC+2, awokd a écrit :
>> Usually there is a script that runs inside the Linux VM that re-assigns
>> these to the correct values, but since it's been restored from R3.2 it
>> might not be working. From
On Wed, February 21, 2018 11:20 pm, pixel fairy wrote:
> On Wednesday, February 21, 2018 at 3:18:34 PM UTC-8, pixel fairy wrote:
>
>> On Wednesday, February 21, 2018 at 2:15:56 PM UTC-8,
>> klausd...@mail2tor.com wrote:
>>
>>> Is it possible to root a Firefox instance of a DispVM trough Tor?
>>>
On Thu, February 22, 2018 12:52 pm, 'Aaron Dough' via qubes-users wrote:
> Attaching 3:00.0 to sys-net also did not help, instead sys-net would not
> start up any more ("Cannot execute qrexec-daemon").
>
> So I'm back to disabling ethernet altogether by not attaching 3:00.1 to
> sys-net. This is
On Thu, February 22, 2018 1:18 pm, 'Aaron Dough' via qubes-users wrote:
> On February 22, 2018 1:06 PM, 'awokd' via qubes-users
> <qubes-users@googlegroups.com> wrote:
>> I'm wondering if sys-net and suspending will be more stable if you
>> attach everything on bus 3
On Thu, February 22, 2018 1:49 pm, Aaron Dough wrote:
> Good to know. Since Tuxedo especially advertises it's native
> Linux-support, I think I'll ask their support directly regarding this
> issue. It may be far fetched, but if this is really solvable with updated
> firmware, it's worth a shot
On Sun, February 18, 2018 7:10 pm, Unman wrote:
> On Sun, Feb 18, 2018 at 06:22:46PM -, 'awokd' via qubes-users wrote:
>> https://github.com/QubesOS/qubes-issues/issues/3596 is resolved. Seems
>> to be impacting Ubuntu builds as well.
>>
>>
>
> That
On Sun, February 18, 2018 10:24 pm, Yuraeitha wrote:
> hmm, thinking about it, did you try awokd's approach?
He had but it wasn't working so I was just suggesting trying out a
different command line option for xclip. Could be because it was in a
different session or something, like you're
On Thu, February 22, 2018 6:19 pm, 'Aaron Dough' via qubes-users wrote:
> Sorry for the avalanche of messages, I just had sys-net freeze on me even
> though the Ethernet controller was detached. As it turns out, the
> Wireless controller needs no-strict-reset=true too. Now it seems much
> more
On Fri, February 23, 2018 7:35 pm, Daniil .Travnikov wrote:
> пятница, 23 февраля 2018 г., 14:07:38 UTC+3 пользователь awokd написал:
>> On Fri, February 23, 2018 10:46 am, Daniil .Travnikov wrote:
>>
>>
>> EFI is a bit different, not sure you get a Troubleshooting menu there.
>> If
>> not, see
>>
On Mon, January 15, 2018 2:15 am, pr0xy wrote:
> The company is using a Squid transparent proxy for HTTP/HTTPS and
> another proxy for FTP (which I haven't completely figured out yet). The
> proxies are:
>
> HTTP PROXY http://proxy.example.com:8080
> HTTPS PROXY http://proxy.example.com:8080
>
On Fri, February 23, 2018 7:18 pm, Thorsten Schierer wrote:
> So now I'm stuck with the "no IOMMU?" error in
> libxl-driver.log.
>
> Any idea what the problem is and how it can be solved?
When you run qubes-hcl-report in R3.2 dom0, what does it tell you? Look
for the five entries at the end,
On Fri, February 23, 2018 11:12 pm, awokd wrote:
> The newer R3.2 kernel still didn't work with iommu=no-igfx? That's too
> bad, thought it might help there.
Had another thought on this. Whatever is causing your newer R3.2 kernel to
fail to load might also be causing your R4.0 installer to
On Wed, February 7, 2018 12:16 am, taii...@gmx.com wrote:
> Forgot to add:
>
>
> It is a shame that qubes doesn't support POWER.
Meant to reply to this one earlier!
What would need to happen for Qubes to run on POWER? Does Xen support it?
--
You received this message because you are
On Sat, February 24, 2018 11:13 pm, Daniil .Travnikov wrote:
> About video card, one person on Github said that he has the same problem:
> https://github.com/QubesOS/qubes-issues/issues/3625
>
>
>
> For example, if I will put some discrete video card on my motherboard,
> will it helps? Or is
On Fri, February 16, 2018 3:22 pm, 'awokd' via qubes-users wrote:
> On Fri, February 16, 2018 3:13 pm, nunotmalhe...@gmail.com wrote:
>
>> sexta-feira, 16 de Fevereiro de 2018 às 15:02:54 UTC, awokd escreveu:
>
>
>>> dracut -f /boot/efi/EFI/qubes/initramfs-$(uname -r).im
On Fri, February 16, 2018 2:03 pm, Ivan Mitev wrote:
> In case you update the doc, you may add `systemctl enable fstrim.timer`
> for setting a periodic job in the configuration section [1]. However:
> - the timer is run daily, not weekly (fstrim runs very fast though,
> shouldn't be an issue). -
On Fri, February 16, 2018 9:43 am, Tim W wrote:
> The last two days I have been having issues building 3.2 have not tried
> 4.0 yet.
> I get the the following errors in the template-stretch.log file. The
> Component fails on the stretch standard template build. All the Fedoras
> are good has
On Fri, February 16, 2018 2:49 pm, 'awokd' via qubes-users wrote:
> On Fri, February 16, 2018 2:37 pm, nunotmalhe...@gmail.com wrote:
>
>> sexta-feira, 16 de Fevereiro de 2018 às 11:34:10 UTC, awokd escreveu:
>>> On Fri, February 16, 2018 10:37 am, nunotmalhe...@gmail.c
On Fri, February 16, 2018 2:37 pm, nunotmalhe...@gmail.com wrote:
> sexta-feira, 16 de Fevereiro de 2018 às 11:34:10 UTC, awokd escreveu:
>> On Fri, February 16, 2018 10:37 am, nunotmalhe...@gmail.com wrote:
>> 4) Please try this longer version of initramfs generation. I think the
>> short
On Fri, February 16, 2018 3:13 pm, nunotmalhe...@gmail.com wrote:
> sexta-feira, 16 de Fevereiro de 2018 às 15:02:54 UTC, awokd escreveu:
>> dracut -f /boot/efi/EFI/qubes/initramfs-$(uname -r).img $(uname -r)
>>
>> works for a generic version at least. Will go with that unless there's
>> a
On Thu, February 15, 2018 8:34 pm, donoban wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA256
>
>
> On 01/24/2018 03:46 PM, 'awokd' via qubes-users wrote:
>
>> On Wed, January 24, 2018 1:18 pm, pixel fairy wrote:
>>
>>> starting a standalone hvm with
On Fri, February 16, 2018 6:44 pm, ronwirr...@safe-mail.net wrote:
> Qubes should investigate if it is not secure to
> use a ssd because the software which runs the ssd may nullify any piece of
> encrypted data on the ssd.
>
> https://www.qubes-os.org/doc/system-requirements/#recommended
>
>
>
On Fri, February 16, 2018 3:33 pm, 'awokd' via qubes-users wrote:
> On Fri, February 16, 2018 9:43 am, Tim W wrote:
>
>
>> The last two days I have been having issues building 3.2 have not tried
>> 4.0 yet.
>>
>
>> I get the the following errors in the templat
On Sun, February 18, 2018 5:47 pm, klausdiet...@mail2tor.com wrote:
> Hey,
>
>
> i want to know how to set a shortcut in the whonix App VM. I installed
> Bitmessage in Whonix WS Template and used this to create a shortcut:
>
>
> https://qubes-os.org/doc/managing-appvm-shortcuts/
>
>
> But it
On Thu, February 22, 2018 9:51 pm, Daniil .Travnikov wrote:
> When I updated last time my BIOS Firmware, it was been from here:
> https://downloadcenter.intel.com/download/23908/Intel-Server-Board-S5520HC
> -S5500HCV-S5520HCT-and-Intel-Workstation-Board-S5520SC-Firmware-Update-Pa
>
On Thu, February 22, 2018 1:39 pm, CMaurice wrote:
> So, having exhausted other options as far as I could tell, followed the
> instructions for installing over VNC, which went ok.
>
> Legacy boot elected in BIOS for hd and for USB media at install.
>
>
> But on boot without nomodeset and no i915
On Tue, February 20, 2018 5:02 pm, Kelly Dean wrote:
> I'm getting the same bug as reported at
> https://github.com/QubesOS/qubes-issues/issues/2018
>
> qvm-block -l says the USB device is attached to the appVM. But the appVM
> has no /dev/xvdi
I wonder if this might be related to a recent patch
On Wed, February 21, 2018 4:41 pm, qubenix wrote:
>> So let me be blunt as this is likely the last email from me to qubes
>>
> anyway;
>
> Bye, I'm happy to see you go away finally. It was killing me inside that
> you were working on the new gui controller. Fuck off back to bcash.
Tom had some
On Wed, February 21, 2018 10:16 am, ThierryIT wrote:
>
> the not working VM prefs:
>
>From these lines in your config, it looks like you've created this VM on
R3.2 as a standalone HVM instead of an AppVM based on a template. Does
that sound right?
klass D TemplateVM
virt_mode
On Sat, February 17, 2018 8:33 pm, ynwa44 via qubes-users wrote:
> On Tuesday, February 13, 2018 at 4:31:33 PM UTC+4, awokd wrote:
>
>> On Tue, February 13, 2018 11:32 am, xxx.l...@gmail.com wrote:
>>
>>> Thank you for your help awokd, I now have sys-net running in HVM mode
>>> on the XPS 9350
On Sun, February 18, 2018 5:41 pm, klausdiet...@mail2tor.com wrote:
> Hey guys,
>
>
> I want to create a Ubuntu Template VM in Qubes OS, but i don´t know how
> to do this. Can someone help me or someone who aleady did this, can
> describe how to do this?
On Fri, February 23, 2018 10:46 am, Daniil .Travnikov wrote:
> I thought that this issues in url which you provided in existing systems
> which already installed. How can I change for example "startup parameters
> for Xen"?
If you are using legacy boot for the installer, go to the
On Fri, February 23, 2018 10:28 am, CMaurice wrote:
> Aye, there's no onboard graphics, there's compatibility with VGA or some
> sort of pass through for boot and BIOS, not sure.
>
> But anyway, tried 3.2 and that worked fine! So at least I can learn a bit
> about Qubes before having to re-install
On Fri, February 23, 2018 11:41 am, Daniil .Travnikov wrote:
> Yes, I tried this basic graphics mode, but nothing new changes. What
> options I have on this Tab command line?
>
> Screenshot: https://prnt.sc/iiounx
Try replacing "quiet" with "iommu=no-igfx".
> P.S. When I put 'qvm-block' in
On Thu, December 28, 2017 1:16 am, qubesuser02 wrote:
> Hello,
>
>
> My WiFi usb adapter does not work in my NetVM "sys-wifi" while driver is
> installed.
>
> Settings:
> - fresh Qubes 3.2 installation (+ recent updates)
> - TemplateVM Fedora 25 (+ recent updates, + dkms installed, + newest wifi
>
On Mon, December 25, 2017 4:23 pm, Adrian Rocha wrote:
> Hi people,
>
>
> I created a new Windows 7 HVM and installed the qubes tools, but the
> seamless mode doesn't work, and without the seamless mode option selected
> I can't resize or maximize the window.
> I have another Windows 7 HVM that I
On Tue, December 26, 2017 10:40 am, Frédéric Pierret (fepitre) wrote:
> Le dimanche 24 décembre 2017 11:03:56 UTC+1, awokd a écrit :
>
>> On Sun, December 24, 2017 9:47 am, Frédéric Pierret (fepitre) wrote:
>>
>>
>>> Hi, I have also some free time (holidays!), as I have already
>>> prepared
On Thu, December 28, 2017 3:50 pm, jean baptiste Morvan wrote:
> Hello,
> I have a big trouble, impossible to install this OS in my hard disk ? I'm
> obliged to stopped my test after the start of this from my key UBS ?? Can
> you explain the reason why it's a big trouble? thanks
The developers
On Thu, December 28, 2017 2:40 pm, e...@hotmail.de wrote:
> SOLVED: Downgraded WPA_SUPPLICANT to version 2.5 (from 2.6). It seems to
> be a Fedora 25 issue.
You might want to try Fedora 26. I just learned 25 is End Of Life already!
You can get the template by:
sudo qubes-dom0-update
On Tue, January 2, 2018 9:27 am, Roy Bernat wrote:
> Hi All
>
>
> i am trying to understand if someone succeeded to install win7/10 on
> qubes 4. R
Haven't tried a brand new install, but I restored to 4.0 a Win7 VM I had
made on 3.2 and it booted right up.
--
You received this message because
On Tue, January 2, 2018 3:59 pm, Roy Bernat wrote:
> can you send me your prefs ?
>
> I succeeded to make it work but it is very unstable
Haven't tested mine for stability on 4, just booted it once and shut it
down. But my settings on 3.2 are 2048MB initial/max memory and 1 vCPU.
--
You
On Wed, December 20, 2017 11:51 pm, 'awokd' via qubes-users wrote:
> On Wed, December 20, 2017 10:22 pm, Marek Marczykowski-Górecki wrote:
>> Try building ISO based on example-configs/qubes-os-3.2.conf, with
>> changed:
>>
>>
>>
>> DISTS_VM = fc26 stre
On Fri, December 22, 2017 10:29 am, 'Tom Zander' via qubes-users wrote:
> On Friday, 22 December 2017 02:42:57 CET yreb...@riseup.net wrote:
>
>> assuming 4.0 is going to come out of the box with like Debian 9 and Fed
>> 26?
If you have room for it, back up everything! You can restore selectively
On Fri, December 22, 2017 6:12 pm, Josefa Hays wrote:
> I recently installed Q4.0-rc3. I have an old qubes-backup (from 2016) on
> a LUKS encrypted external HDD. How do I restore my backup in 4.0 using
> qvm-backup-restore? I guess I don't want to mount the drive directly in
> Dom0, so, how do I
On Fri, December 22, 2017 8:55 am, '[799]' via qubes-users wrote:
>
> This I also what I assumed as there must be a good reason why Qubes Team
> has switched to HVM instead of using PV VMs. Still I'd like to learn more
> about the vulnerabilities, so I can make a decision risk vs. runtime. And
>
On Tue, December 26, 2017 7:15 pm, yreb...@riseup.net wrote:
> fwiw, I am unable to actually add backupVM diskspace for the same reason,
> duh. I think my only option is to remove the huge dom0 file , but I'm
> still wondering how do I get a system wide understanding of how 3.2 is
> using the
On Tue, December 26, 2017 8:48 pm, yreb...@riseup.net wrote:
> On 2017-12-26 10:14, awokd wrote:
>
>> On Tue, December 26, 2017 7:15 pm, yreb...@riseup.net wrote:
>>
>>> fwiw, I am unable to actually add backupVM diskspace for the same
>>> reason, duh. I think my only option is to remove the huge
On Wed, December 27, 2017 6:05 pm, taii...@gmx.com wrote:
> What version of coreboot are you using, they are removing AGESA from the
> latest versions due to some dumb choices by the leadership.
I'm not sure that's accurate. From the thread on the Coreboot mailing list
a few months ago, it
On Thu, December 28, 2017 2:42 am, cooloutac wrote:
> On Wednesday, December 27, 2017 at 8:40:03 PM UTC-5, Styles Grant wrote:
>
>> Obviously theres some issues with amd discreet gpu and qubes, to put it
>> slightly. Uh, theres one example on the hardware compatibility list
>> that stood out
On Wed, December 20, 2017 10:22 pm, Marek Marczykowski-Górecki wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA256
>
>
> On Wed, Dec 20, 2017 at 12:38:47PM -0000, 'awokd' via qubes-users wrote:
>
>> On Wed, December 20, 2017 5:55 am, Andrew David Wong wrote:
&g
On Thu, January 4, 2018 12:03 am, rysiek wrote:
> And here we are:
> https://security.googleblog.com/2018/01/todays-cpu-vulnerability-what-you-
> need.html
> https://googleprojectzero.blogspot.pt/2018/01/reading-privileged-memory-w
> ith-side.html https://meltdownattack.com/meltdown.pdf
>
On Thu, January 4, 2018 2:34 am, Wael M. Nasreddine wrote:
> This is even better
> https://www.newegg.com/Product/Product.aspx?item=N82E16817153218 for $280
> but it does not seem to come with 2 EPS (even though I see +12V1 and
> +12V2.
> I think one is EPS and another one is ATX. I read on
On Mon, January 1, 2018 4:36 am, 'Max Andersen' via qubes-users wrote:
>
> libvirtError: operation failed: domain 'win7' already exists with uuid
>
Sometimes a reboot clears up discrepancies like that for me.
--
You received this message because you are subscribed to the Google Groups
On Mon, January 1, 2018 1:44 pm, Lorenzo Guerra wrote:
> Mine is just a guess: have you tried with something like 'virsh -c
> xen:/// undefine win7' and then, if some references to your vm remains in
> qubes.xml or the Application menus, manually remove them?
Sounds like that worked for Max.
On Sun, December 31, 2017 8:31 pm, Sameer Vao wrote:
> freezes completely (hangs) normally within 15 minutes after booting,
> needing a hard reboot. Theres no specific thing - sometimes moving the
If you haven't already, try running "sudo qubes-dom0-update" as soon as
you get in to Qubes.
--
On Mon, January 1, 2018 10:41 am, Max Andersen wrote:
> Hi awokd
>
>
>> Den 1. jan. 2018 kl. 11.32 skrev awokd :
>>
>>
>>> On Mon, January 1, 2018 4:36 am, 'Max Andersen' via qubes-users
>>> wrote:
>>>
>>>
>>>
>>> libvirtError: operation failed: domain 'win7' already exists
On Thu, January 4, 2018 11:46 am, Fabrizio Romano Genovese wrote:
> I suspect there is some service that needs to be started when the VM
> boots that I haven't specified, but I don't know how to proceed.
Try adding NetworkManager to the Services tab on your sys-net VM?
--
You received this
On Thu, January 4, 2018 1:28 am, awokd wrote:
> On Thu, January 4, 2018 12:03 am, rysiek wrote:
>
>
>> And here we are:
>> https://security.googleblog.com/2018/01/todays-cpu-vulnerability-what-yo
>> u- need.html
>> https://googleprojectzero.blogspot.pt/2018/01/reading-privileged-memory
>> -w
>>
I found the following humourous:
"there is no credible engineering rationale to support the contention that
SGX enclaves will provide confidentiality guarantees in the face of these
new micro-architectural cache probing attacks."
On Sun, February 25, 2018 1:52 am, taii...@gmx.com wrote:
> You can't pass through a
> laptop GPU like that as both the iGPU and dGPU considered a primary video
> adapters - you would have to purchase an eGPU if you want a GPU in a VM
> and you also need a secondary usb controller, monitor, audio
On Mon, February 26, 2018 10:30 pm, patelma...@gmail.com wrote:
> The new TPM chips are pretty cool too, will see where that goes. How do
> you like yours? Did you do it all yourself or get it as is? Was it hard
> to get to its current state where you feel like you are literally in
> complete
201 - 300 of 1785 matches
Mail list logo