Re: [qubes-users] debian 8, rc.local not running

Unman, That code is just what I have int hat NetVM. As I said, rund fine running from CLI, but not on boot. Does not make sense when it works fine on Fedora 20, 21 & 23 (normal and minimal [ if services I use and call are installed ] ) Yes, I have taken out specific bits of code that I have

[qubes-users] Dom0 Enable access

Hi folks, I'm wanting to give Dom0 access to internet to only a specific IP Address. This is to enable functionality that I need to look at and test. What's the easiest way to do this? Do I pass it through a ProxyVM that has rules for only the one IP that it's allowed to access? Or is there a

[qubes-users] Updating Dom0, Qubes, grumbles, things that need to be fixed and not need to be fixed.

Hi folks, Please, do not take this whole thing the wrong way. It will seem like it is sounding the way it is not sounding, just because of the way it is put together. It's all things that I find need to be looked into, things that I know need to be fixed, and that I have fixed on my local.

Re: [qubes-users] Qubes on a Shoestring in a Hurry

On Sunday, 5 June 2016 19:20:43 UTC+10, unc...@sigaint.org wrote: > > On Sat, June 4, 2016 13:58, unc...@sigaint.org wrote: > > > On Sat, June 4, 2016 12:35, "Holger Levsen" > wrote: > > > >> did you try XFCE instead of KDE? XFCE is much more ressource friendly. >

[qubes-users] Re: Windows 7 virtual graphics card

On Thursday, 2 June 2016 21:24:02 UTC+10, Achim Patzner wrote: > > Is there a way to provide a virtual graphics card that will support > 3840*2160 pixels? I'm having serious problem to see anything using a > Windows 7 HVM at 257 dpi... > > Either install the tools and go Seamless, OR alter

[qubes-users] Re: HVM Mouse Emulation Options

On Sunday, 8 May 2016 09:31:31 UTC+10, fred_...@sigaint.org wrote: > > I've installed an Android-based HVM (Remix OS). When installed on bare > metal, physical usb mice behave like normal desktop mice in the OS. > > However, in the HVM, the cursor needs to be dragged around with the mouse. >

[qubes-users] Tools for Windows...

Qubes Tools for Windows.. One thing I've just been looking at... The Qubes Video Driver shows it as being 3600 x1200, but that's not correct. That's way too high for one of my monitors. When I have my other monitor on, it has a height of 1920 and a width of 1200. With this I can only then

[qubes-users] Tools for Windows definitly broken.

Hi folks, I know I've asked this before, but I never got an answer to the question... What is required in Windows for Qubes Tools for Windows to enable the Seamless GUI to work? Are there any specific updates or things that have to be enabled? Anything at all that would mean it doesn't work?

[qubes-users] Re: Reinstalling template-vms?

You don't really NEED the originals. I have modified originals, because they are modified with things I need, not with things that only SOME AppVMs need. Mainly I think that they say make a copy, is so that you still have the original, and if you break the template, you have a fall back to the

[qubes-users] USB connection between VMs

Hi folks, One question I have is is it possible to create a USB connection between 2 VMs? For example in a real word situation.. I have a phone, I plug it into my PC. I want that same functionality for 2 VMs, plugging one VM into another by USB cable in that exact same way. Thus creating

Re: [qubes-users] Debian 8 Template, can't install printers

Fedora method: 1. Start Template 2. Open Printers Dialog 3. Install printer by normal method 4. Shut down template. complete. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it,

Re: [qubes-users] Tools for Windows definitly broken.

On Thursday, 2 June 2016 08:43:56 UTC+10, raah...@gmail.com wrote: > > actually, sometimes windows hvm errors and won't load when selecting an > app from the startmenu. So usually I just start the win7 vm manually > from the qubes-manager first before loading a program from it. I have

Re: [qubes-users] Debian 8 Template, can't install printers

On Thursday, 2 June 2016 14:11:32 UTC+10, Chris Laprise wrote: > > > > On 06/01/2016 10:29 PM, Drew White wrote: > > > > The UI he is describing is system-config-printer (Red Hat). He > > could try > > gnome-control-center -

Re: [qubes-users] Seamless mode off causes full screen HVM?

Hi andrew, I have the same issue, and no, I only get the main resolution AND 800x600. I change to 800x600 and it just reverts back to the original it was, full-screen. And it then asks me if the changes I made I want to revert or save. There are several things wrong with Qubes Windows Tools,

Re: [qubes-users] debian 8, rc.local not running

Hi Marek, > > > > hname=`hostname` > > > > #service dnsmasq stop > > service smbd stop > > Take a look at commented example above and use `systemctl --no-block` > (with all its consequences). rc.local itself is started as a systemd > service and starting/stopping another service from it

Re: [qubes-users] Re: Updating Dom0, Qubes, grumbles, things that need to be fixed and not need to be fixed.

Firstly, Alex, hello, Initially I want to say that I appreciate your harassment of my feedback and information provided. If you noticed in my initial opening statements I wished for the details and information to NOT be taken the wrong way, which it appears that you have. On the subject of

[qubes-users] How to create new Dom0?

Hi folks, I'm wondering how to create a new Dom0? What would I have to have on it, to use it instead of Fedora? I have found nothing in Docs. Is it just the same as doing it for XEN, but then adding Qubes-OS packages and configurations? Are there instructions somewhere that I can see? Or are

[qubes-users] Re: Bridged NAT Win App VM

I have been working on getting my bridging perfect, just using iptables on the NetVM. I have not got it working perfectly, there are still some things wrong with other things that I have to find a way to work around it. Once it's working perfectly, I'll put it up somwhere. On Saturday, 18

Re: [qubes-users] Virtualising Qubes

On Thursday, 23 June 2016 17:18:22 UTC+10, mmih...@gmail.com wrote: > > How about if you try to install the Qubes on the bare metal? I recently > managed to install the Qubes R3.1 on an external disk by swaping my primary > disk and installing the Qubes on it. Then I put my primary disk back

Re: [qubes-users] Virtualising Qubes

On Friday, 24 June 2016 18:57:52 UTC+10, Andrew David Wong wrote: > > You asked for information about installing Qubes in a virtual machine, > but you gave no indication that you were aware that this is not > supported, so I pointed out that it is not supported. If you were not > aware that

Re: [qubes-users] Virtualising Qubes

> > There is an option that is somewhere in between. *I think* I had it > working at one point. I can't remember for sure. > I just want to get my development tools on there, under Dom0, so that I can finish off my Qubes Manager, but not have it running on a live machine that will be in a PC

Re: [qubes-users] Virtualising Qubes

> > There is an option that is somewhere in between. *I think* I had it > working at one point. I can't remember for sure. > I've had version 3.0 and 3.1 working in a virtual on VMWare, by installing from an ISO. > Install Qubes on bare metal but install it to an external USB3 hard

[qubes-users] Re: disable seamless mode Windows 7

I have not yet had any reply to this in the past 2 months, just wondering if it is being looked into or not. Just since it's a bug that needs to be resolved. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and

Re: [qubes-users] Qubes 3 MacOSX

On Sunday, 15 May 2016 14:05:50 UTC+10, Jeremy Rand wrote: > > FWIW, I think a legal argument could be made that such license > agreements are anti-competitive and therefore unenforceable. However, > I am unaware of any specific precedent for this argument, so it would > indeed probably be

[qubes-users] things for all the HVMs and AppVMs that we make...

For many systems there is something missing. I've mainly noticed this recently. Every AppVM and HVM I create that isn't standaone has not installable area. There needs to be something as a sandbox tool on there, not sandboxie, or any other spyware included thing. that way, whenever something

[qubes-users] Re: Video in Qubes 3.2

On Wednesday, 29 June 2016 17:41:49 UTC+10, ghbouc...@gmail.com wrote: > > Hi. > > I'm talking about the VM "virutal" CPU. > hint: 1 vCPU = 1 thread of the real CPU. > > How many threads do you have assigned to the VM? > 8 > Well, without knowing what CPU is, it is hard to provide complete

Re: [qubes-users] Re: disable seamless mode Windows 7

the command is close enough, and yes I did that. That didn't work either, which is why unchecking it didn't work either because the unchecking and checking of the bod performs that command. This is an issue that happens, and continually occurrs and has been an issue for ages I do it when the

[qubes-users] Re: Video in Qubes 3.2

On Wednesday, 29 June 2016 17:33:45 UTC+10, ghbouc...@gmail.com wrote: > > Hi. > > I often watch videos offline. I download .mp4 files dans I play them in a > dedicated VM (debian template) with MPV. > When I launch a video, the VM CPU goes up to 98%, It is quite strange. > > Anyone knows how to

Re: [qubes-users] Re: disable seamless mode Windows 7

On Wednesday, 29 June 2016 12:39:20 UTC+10, Eva Star wrote: > > Yesterday I unchecked "Seamless mode" on already running copy of the > Windows and it's do the magic on the fly... > Yes, that is how it's meant to work, and EXACTLy how it works in Qubes 2, and worked in every way possible back

Re: [qubes-users] Window border coloring

On Wednesday, 13 July 2016 11:36:00 UTC+10, Marek Marczykowski-Górecki wrote: > > Only very few places use this value currently. Most of them (including > standard window decoration) use "label index" value (-l 3 here), which > refers to hardcoded table in KDE/Xfce/i3/... > This is going to be

[qubes-users] Re: Qubes Security Bulletin #24 (Critical bug)

On Tuesday, 26 July 2016 22:06:25 UTC+10, Joanna Rutkowska wrote: > > We have just released a new Qubes Security Bulletin (QSB #24) for a critical > bug > in the Xen hypervisor: > > https://github.com/QubesOS/qubes-secpack/blob/master/QSBs/qsb-024-2016.txt > > Please install the updates,

[qubes-users] Re: Linux Packages for Fedora

On Thursday, 21 July 2016 11:58:01 UTC+10, Drew White wrote: > What packages are required to get the system working as integrated into Qubes? > > i.e. Seamless mode, copy and paste, live changes, memory balancing, etc.. Any chance anyone knows this? or does this remain a mystery beca

Re: [qubes-users] Qubes Security Bulletin #24 (Critical bug)

On Wednesday, 27 July 2016 09:34:17 UTC+10, Marek Marczykowski-Górecki wrote: > > "Of course, to be compatible with Qubes OS, the BIOS must properly expose > > all the VT-x, VT-d, and SLAT functionality that the underlying hardware > > offers (and which we require)." > > The easiest way is to

[qubes-users] Re: Qubes Network Setup Service

> I don't even get a ip so assigning a new dns server won't help. Look in the Qubes Manager, that's the one you give it. > I think its a communication problem between windows and dom0, but i don't > know enough to diagnose it further. -- You received this message because you are subscribed

Re: [qubes-users] Re: Qubes Network Setup Service

> Is there any log related to this service in the windows event log? Have you checked the Windows Qubes Logs? If you have Qubes Tools installed, they would be wherever you set the logs to be put. Typically that is on the private.img drive. If you don't have them installed, you won't have those

Re: [qubes-users] Installing Older Kernels

On Friday, 15 July 2016 08:14:05 UTC+10, Andrew David Wong wrote: > You can try based on what's described here, combining "How to downgrade a > specific package" with "Kernel Upgrade," but I don't know whether it'll work: > > https://www.qubes-os.org/doc/software-update-dom0/#tocAnchor-1-1-3

[qubes-users] HELP! URGENT! Error starting VM

" Error starting VM 'NetVM': (2, 'no such file or directory') " Why is this happening? The directory exists, the files exist, the XML has the correct path and filenames, the file and folder permissions is correct What is causing this? It happened in 3.1, and now 3.2. The VM was running,

Re: [qubes-users] Installing Older Kernels

On Friday, 15 July 2016 08:38:08 UTC+10, Andrew David Wong wrote: > I'm not sure what you mean. Normally, you can update any version of Qubes by > running qubes-dom0-update. That should work on "old" versions just the same. > > Are you talking about upgrading from one version to the next, e.g.,

Re: [qubes-users] HELP! URGENT! Error starting VM

On Friday, 15 July 2016 08:48:04 UTC+10, Andrew David Wong wrote: > Is that a VM with more than 35 firewall rules? I put " NetVM " in there so that it would not be misunderstood. Anyway, I have guests on my other machine with many more firewall rules than 35 and no issues. -- You received

Re: [qubes-users] HELP! URGENT! Error starting VM

Also, there are some guests I've had working for several months, and never changed the settings since day 1. Then one day after a few months they just have that issue, can't find file or folder.. and nothing has changed. The NetVM is usually having an issue like not being able to see the

Re: [qubes-users] HELP! URGENT! Error starting VM

Also, that link is "Error starting VM: (0, 'Error')" not "Error starting VM 'GUEST NAME': (2, 'No such file or directory')" -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an

Re: [qubes-users] installer 3.2 bugs

On Friday, 15 July 2016 09:22:03 UTC+10, Marek Marczykowski-Górecki wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA256 > > On Thu, Jul 14, 2016 at 03:56:32PM -0700, Drew White wrote: > > installer bug.. picture > > If you don't want to configure anything,

Re: [qubes-users] Multi-drive computers installation

On Thursday, 14 July 2016 21:15:19 UTC+10, Gorka Alonso wrote: > I think you were missing the term 'volume' in contrast with drive. Thanks for > the explanation, wanted to make sure I understood it right. A volume isn't a drive. A drive is a drive. You can have multiple volumes on 1 drive.

[qubes-users] Installing Older Kernels

Hi folks, How do I install older kernels? I want them to be installed for he older templates I have, but installed under a later version of Qubes, just for Fedora 23 for example. How can I do this please? -- You received this message because you are subscribed to the Google Groups

[qubes-users] Re: Qubes Network Setup Service

On Thursday, 14 July 2016 22:09:21 UTC+10, Adam wrote: > Hi > > I have successfully install Qubes 3.2-r1 on a lenovo x220 > I have player around with templates and AppVMs and thought i would try > Windows 7. > > I successfully install windows in a HVM Template and then installled Qubes >

Re: [qubes-users] Multi-drive computers installation

On Thursday, 14 July 2016 20:26:03 UTC+10, Gorka Alonso wrote: > What do you call 'multi-drive PC'? A computer with 2 physical drives (for > example a SDD and a HDD)? Yes, Multi-Drive. It doesn't mean anything else. To read it as anything other than what it says just means that someone is

Re: [qubes-users] Re: Networking

On Friday, 22 July 2016 03:59:45 UTC+10, raah...@gmail.com wrote: > On Wednesday, July 20, 2016 at 9:59:28 PM UTC-4, Drew White wrote: > > On Thursday, 21 July 2016 10:56:42 UTC+10, raah...@gmail.com wrote: > > > I use kde. I just hit esc at the splash screen to see the boot

[qubes-users] Window border coloring

Hi folks, I'm trying to get this to work but it's not letting me make it work... Trying to change the window border colour, if I change it, it changes to white, instead of the colour I set it to instead of using a label. What is it that causes this? Is it a bug? /usr/bin/qubes-guid -d 8 -N

[qubes-users] Multi-drive computers installation

Has anyone been able to install Qubes on a multi-drive PC as a multi-drive PC without having all drives formed into 1 yet? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an

Re: [qubes-users] Re: Networking

On Wednesday, 13 July 2016 11:41:36 UTC+10, Marek Marczykowski-Górecki wrote: > Check at what speed your connection was negotiated in netvm (sudo > ethtool eth0 - or whatever interface is named). Also check CPU > utilization during the transfer - maybe your CPU can't handle more when > passing

Re: [qubes-users] Re: Networking

On Wednesday, 13 July 2016 13:32:03 UTC+10, Drew White wrote: > NAME STATE CPU(sec) CPU(%) MEM(k) VCPUS NETS NETTX(k) NETRX(k) > AppVM --b---484 80.61048564 3000 > NetVM --b---200 58.01042420 2000 I sho

Re: [qubes-users] Re: Networking

On Wednesday, 13 July 2016 02:33:17 UTC+10, entr0py wrote: > Driver? Good thought, but no. I check all that sort of stuff before I say anything generally. Because if it was something as simple as that, then it would be easy to fix, but since it's NOT that, since it is only in the guests BEHIND

[qubes-users] ZFS

Is there any way to get ZFS working in Qubes properly during install? I see no reason why the filesystem can't be worked that way. But I was wondering if there was anything that was actually causing you to not put it in as an option by default in the base system, dom0, and the guests? -- You

Re: [qubes-users] Multi-drive computers installation

On Thursday, 14 July 2016 01:09:10 UTC+10, Chris Laprise wrote: > On 07/12/2016 08:35 PM, Drew White wrote: > > Has anyone been able to install Qubes on a multi-drive PC as a multi-drive > > PC without having all drives formed into 1 yet? > > > > Anaconda always seems

Re: [qubes-users] Re: Networking

On Thursday, 14 July 2016 06:46:19 UTC+10, raah...@gmail.com wrote: > Is it only windows vm's that have this problem? Perhaps you missed what I said earlier, it's both, at least in Qubes 3.1 it is. Just put 3.2 on here, and it seems to work fine for Linux. around 40 MBps / 320 Mbps. So

Re: [qubes-users] Re: Networking

On Wednesday, 13 July 2016 11:41:36 UTC+10, Marek Marczykowski-Górecki wrote: > Check at what speed your connection was negotiated in netvm (sudo > ethtool eth0 - or whatever interface is named). Also check CPU > utilization during the transfer - maybe your CPU can't handle more when > passing

[qubes-users] why oh why oh why... Monitors...

Why is there no more configuration for monitors from version 3.1 to 3.2? I have to download Arandr or similar to get it done, and then it's not configured properly, and I have to re-configure every time I start the PC... I know I can set the script to be on boot, but if the secondary monitor

Re: [qubes-users] [bug] Inter-VM Copy/Paste Broken After Long Uptime

On Thursday, 21 July 2016 08:28:29 UTC+10, Andrew David Wong wrote: > > Also, are there other known problems with running Qubes with a such a > > "long" uptime? > > > > This and the Qubes Manager memory leak are the only two I know of. > > https://github.com/QubesOS/qubes-issues/issues/860 >

[qubes-users] Re: I miss the KDE cpu sensor

On Thursday, 21 July 2016 01:05:48 UTC+10, J. Eppler wrote: > > I'm not sure what you mean by xfce has io display, do you mean the task > > manager? I don't find it accurate. I installed iotop to dom0 once but I > > figure maybe not a good idea to install anything to dom0. Is there some >

[qubes-users] Linux Packages for Fedora

What packages are required to get the system working as integrated into Qubes? i.e. Seamless mode, copy and paste, live changes, memory balancing, etc.. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop

[qubes-users] Re: [bug] Inter-VM Copy/Paste Broken After Long Uptime

On Tuesday, 19 July 2016 23:13:28 UTC+10, Andrew wrote: > Hello, > > I have one particular Qubes instance with an uptime >60 days. Aside > from needing to occasionally restart Qubes Manager to deal with the > memory leak problem, this works fine. > > However, recently, I have become unable to

[qubes-users] Re: I miss the KDE cpu sensor

On Monday, 18 July 2016 13:04:52 UTC+10, raah...@gmail.com wrote: > It was the only way i had in qubes to see true total cpu use, nothing else > shows it. qubes manager or top in dom0, neither does the xfce addon to cpu > monitor i'm using called cpu graph. now I just have to go by feel haha

[qubes-users] Re: [bug] Inter-VM Copy/Paste Broken After Long Uptime

On Tuesday, 19 July 2016 23:13:28 UTC+10, Andrew wrote: > Hello, > > I have one particular Qubes instance with an uptime >60 days. Aside > from needing to occasionally restart Qubes Manager to deal with the > memory leak problem, this works fine. > > However, recently, I have become unable to

Re: [qubes-users] Re: Networking

On Monday, 18 July 2016 12:59:49 UTC+10, raah...@gmail.com wrote: > Qubes really isn't that hard to use, but for some reason its got that stigma > attached to it. Its different is all it is. Anyone who uses windows and > doesn't need to play games can use it imo. I taught my family how to

Re: [qubes-users] Re: Qubes Network Setup Service

On Saturday, 16 July 2016 19:00:34 UTC+10, Achim Patzner wrote: > > YOU, Jeremy, are one of the people I dislike more than anyone I have ever > > met or heard from online. > > Some rabbi told me once "if you're pointing a finger at a person there will > be four fingers pointing at yourself".

Re: [qubes-users] Re: installer 3.2 bugs

On Saturday, 16 July 2016 20:38:33 UTC+10, Marek Marczykowski-Górecki wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA256 > > On Fri, Jul 15, 2016 at 10:22:53PM -0700, Drew White wrote: > > On Friday, 15 July 2016 11:34:24 UTC+10, Marek Marczykowski-Górecki wrote: &g

[qubes-users] Re: I miss the KDE cpu sensor

On Wednesday, 20 July 2016 01:01:48 UTC+10, raah...@gmail.com wrote: > ya that is what i'm doing now, since qubes manager is never accurate. But it > doesn't show a total. and was just nice to have that applet on the panel of > kde. The qubes manager isn't that innacurate. I know that XFCE

[qubes-users] Re: I miss the KDE cpu sensor

You miss the KDE sensor for CPU, I miss the networking stats... On NetVM and FirewallVm I have to run bwm-ng all the time because I can't see each individual network stats. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from

Re: [qubes-users] HELP! URGENT! Error starting VM

On Friday, 15 July 2016 11:39:03 UTC+10, Andrew David Wong wrote: > There are two links. Look at the first one. I did. I looked at both links and read it all, it doesn't have anything to do with what my issue is. They have a different error. So it's nothing the same as my error. They also have

Re: [qubes-users] Installing Older Kernels

On Saturday, 16 July 2016 16:35:25 UTC+10, raah...@gmail.com wrote: > On Saturday, July 16, 2016 at 2:26:39 AM UTC-4, Drew White wrote: > > On Saturday, 16 July 2016 16:22:46 UTC+10, raah...@gmail.com wrote: > > > On Saturday, July 16, 2016 at 1:03:01 AM UTC-4

Re: [qubes-users] Re: Networking

On Friday, 15 July 2016 13:28:36 UTC+10, raah...@gmail.com wrote: > ok so what I said the first time then. Its only the windows vms you have > problems with. In 3.2, yes. 3.2 has about 500 different bugs that cause it to be close to unusable. (number exaggerated because I lost count at 137

[qubes-users] Re: why oh why oh why... Monitors...

On Friday, 15 July 2016 10:45:12 UTC+10, Iestyn Best wrote: > Hi Drew, > > This has been answered previously. The "kscreen" app was missed when they > made the ISO and they have said that it will be put in the next release > candidate. > > If you want your screen settings options to be

Re: [qubes-users] Installing Older Kernels

On Saturday, 16 July 2016 16:22:46 UTC+10, raah...@gmail.com wrote: > On Saturday, July 16, 2016 at 1:03:01 AM UTC-4, Drew White wrote: > > On Friday, 15 July 2016 13:29:42 UTC+10, raah...@gmail.com wrote: > > > Are you talking about the kernel for dom0 or fedora template?

Re: [qubes-users] Re: Networking

On Saturday, 16 July 2016 16:25:50 UTC+10, raah...@gmail.com wrote: > > lol, are you sure you are not creating problems for yourself? You would make > a great beta tester, but it doesn't seem you are using qubes like a normal > person. > > Strange that it would work on 3.2 but not in 3.1. I

[qubes-users] Re: Qubes Network Setup Service

On Thursday, 14 July 2016 23:46:56 UTC+10, Adam wrote: > I understand the global view of networking in QubesOS, I have a net VM, a > firewall VM, a proxy VM and a standard app VM all working nicely and my app > VM can surf the web securely. I have Windows AppVMs working happily doing what I

[qubes-users] Re: Qubes R3.1 hangs during boot

upgrade to 3.2 3.1 never hangs for me. and I've pushed it to it's limits, and altered it's code. On Wednesday, 29 June 2016 18:20:26 UTC+10, ama...@riseup.net wrote: > > For months now I've had an intermittent problem where qubes hangs during > the boot process which then results in me having

Re: [qubes-users] Re: Qubes 3.2 rc1 has been released!

On Wednesday, 29 June 2016 04:23:31 UTC+10, Marek Marczykowski-Górecki wrote: > > On Tue, Jun 28, 2016 at 10:36:42AM -0700, raah...@gmail.com > wrote: > > Will we be able to upgrade to 3.2 from dom0 update eventually? Or if we > choose not to reinstall is there security implications? > >

[qubes-users] Re: Qubes R3.1 hangs during boot

final thought: Your PC. Whatever you did before it started, think about it. then find out what that is. After that, let us know and we might be able to help. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop

[qubes-users] Re: HCL Report: HP ProBook 6550b + issues with ProBook

Any advancement on this issue? Is it a bug in Qubes 3.1+ or some other issue? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to

Re: [qubes-users] issues in 3.2

On Tuesday, 5 July 2016 19:41:53 UTC+10, Andrew David Wong wrote: > We agree that this is confusing from a UX perspective, and we are > working on it: > > https://github.com/QubesOS/qubes-issues/issues/1382 Question... Why is it from so long ago and nothing has happenned about it? Is it

Re: [qubes-users] issues in 3.2

On Thursday, 7 July 2016 00:57:06 UTC+10, Andrew David Wong wrote: > I'm not a coder, so I don't know. If you know the task to be an easy > one, why not help us out by contributing the patch yourself? If I was to make a patch for it, it would involve me fixing all the bugs in it, basically

Re: [qubes-users] Qubes Version from CLI

On Thursday, 7 July 2016 00:49:29 UTC+10, Andrew David Wong wrote: > > In dom0: > > $ cat /etc/qubes-release > Is there a reliable way? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails

[qubes-users] Re: Networking

I forgot to mention, I use iptraf-ng for monitoring with speeds. You can set it to kbits/s or kbytes/s for each location targeting to and from. So you will start one, watch the speed, start another and another and another. -- You received this message because you are subscribed to the Google

[qubes-users] Re: Qubes 3.1 crashing, no warning, no error message (Lenovo X230)

On Thursday, 7 July 2016 03:28:10 UTC+10, Andreas Rasmussen wrote: > Hi! > > I bought a Lenovo x230 and installed Qubes 3.1 early may. It has worked > like a charm, but in the last two or three weeks the computer has been > shutting down without warning or error message. It has happened five >

Re: [qubes-users] Qubes Version from CLI

On Thursday, 7 July 2016 12:45:56 UTC+10, Andrew David Wong wrote: > Not sure what you mean. Is this way unreliable? Only in such a way that the file could be changed or corrupted or altered in another way with ease. I know that everything can be changed, but using uname -a shows everything,

[qubes-users] Re: Networking

On Thursday, 7 July 2016 11:52:57 UTC+10, raah...@gmail.com wrote: > I have an i5 machine with integrated nic and ssd, and using a full 100mbps > will make it noticeably slower. But I guess if you have a powerful machine, > why not. > > How can I check what max speed is set to on the

Re: [qubes-users] Re: Networking

On Saturday, 9 July 2016 22:13:30 UTC+10, Marek Marczykowski-Górecki wrote: > Replace your 100Mbps network card with a 1Gbps one. There is no other > limit than your hardware. For example I get this: > > [user@testvm ~]$ wget -O - qb/pub/bigfile >/dev/null > - --2016-07-09 14:10:19--

Re: [qubes-users] Re: Networking

On Monday, 11 July 2016 17:07:26 UTC+10, Drew White wrote: > On Saturday, 9 July 2016 22:13:30 UTC+10, Marek Marczykowski-Górecki wrote: > > Replace your 100Mbps network card with a 1Gbps one. > > FYI: If you read my original post you would see that I have a 1Gbps NIC... In

Re: [qubes-users] Re: Networking

On Saturday, 9 July 2016 22:13:30 UTC+10, Marek Marczykowski-Górecki wrote: > Replace your 100Mbps network card with a 1Gbps one. FYI: If you read my original post you would see that I have a 1Gbps NIC... -- You received this message because you are subscribed to the Google Groups

Re: [qubes-users] Re: Networking

On Saturday, 9 July 2016 22:13:30 UTC+10, Marek Marczykowski-Górecki wrote: > There is no other limit than your hardware. If this is true, then please, why is mine only 100 Mbps behind the NetVM when I have a 1Gbps NIC? I have multiple things monitoring the network activity, and it only ever

Re: [qubes-users] Qubes Version from CLI

On Thursday, 7 July 2016 18:27:40 UTC+10, Andrew David Wong wrote: > It's on hold until we can find a GNOME/GTK developer: > > https://www.qubes-os.org/join/#tocAnchor-1-1-5 Ahh, well, the things I build for my own use in Qubes aren't built using the normal GTK and all that. I know how to

Re: [qubes-users] issues in 3.2

On Friday, 8 July 2016 09:50:21 UTC+10, Iestyn Best wrote: > On Thursday, July 7, 2016 at 11:00:45 AM UTC+10, Drew White wrote: > > On Thursday, 7 July 2016 00:57:06 UTC+10, Andrew David Wong wrote: > > > I'm not a coder, so I don't know. If you know the task to be an e

[qubes-users] Re: Networking

The networking REALLY needs to be up at 1Gbps. This slow speed is just horrific when you are managing servers. Takes forever to upload a 4 GB iso. And to copy a file from the network to local, or vice-versa, takes way too long. -- You received this message because you are subscribed to the

[qubes-users] Re: Networking

On Friday, 8 July 2016 14:36:31 UTC+10, raah...@gmail.com wrote: > oh ok only way i knew of was cat /sys/proc/net/interface/speedthought > maybe there was some similar way to check settings for the virtual nic's > since it didn't work there. > > I think Qubes is aimed more at everyday

[qubes-users] Re: Bridge Network

On Friday, 8 July 2016 14:35:31 UTC+10, Iestyn Best wrote: > You mentioned a script you have. Are you willing to share this and provide > some details on what you have been working on. I am interested as this may > solve a problem that I am currently experiencing. I would be interested in a

[qubes-users] VIF interfaces

How do I find out what VMs are on what VIF from each NetVM/ProxyVM? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To

Re: [qubes-users] Qubes Manager issues

On Thursday, 30 June 2016 20:57:22 UTC+10, Chris Laprise wrote: > > About how long had it been running when you saw it at 597 MB? > Hi chris, Well, not very long at all. Maybe 48 hours. Normally I don't turn my machine off ever, and I never normally have to reboot it unless I'm making a

[qubes-users] Re: BUG. Qubes Windows Tool Win7 under XFCE and Seamless mode window freeze

On Thursday, 30 June 2016 18:48:12 UTC+10, Eva Star wrote: > > Mouse "back" button 100% freeze open window of Window Explorer (file > explorer). Does not tested on other apps. > Does it work in Qubes 2 and NOT freeze? What about 3.0 and 3.1? Just asking, because I noticed issues in certain

Re: [qubes-users] Qubes Manager issues

> > I have the problem that the Manager "vanishes" when I switch sessions > (i.e. from KDE to i3) and I cannot start it or recently I tried to close > and reopen it and it wouldn't reopen. > > A ps aux in dom0 showed that the process was still running, so killing it > let me restart the

Re: [qubes-users] Suggestion: Allow modification of Firewall Rules of several Vms at once

Perhaps this is something that can be added in when the manager is fixed and the issues with the memory leak and functionality and many other bugs are resolved? This would be a good addition. As it is something that I believe many people would benefit from. -- You received this message

  1   2   3   4   5   >