Re: [qubes-users] Can NOT get Broadcom BCM43602 Wifi Card working , DELL XPS 15 9950- Qubes sys-net freezes/ crashes
On Thursday, August 4, 2016 at 3:44:05 PM UTC+3, donoban wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA256 > > On 08/04/2016 02:16 PM, Jeral wrote: > > On Thursday, August 4, 2016 at 11:08:32 AM UTC+3, Marek > > Marczykowski-Górecki wrote: On Wed, Aug 03, 2016 at 07:05:00AM > > -0700, Michael wrote: > >>>> Have a Broadcom BCM43602 Wifi Card in my dell xps 15 9950 > >>>> > >>>> and I downloaded Qubes Release 3.2-rc2 > >>>> > >>>> Problem: I can not connect to the internet cause my wifi card > >>>> is not working with qubes: "If BCM43602, the wireless card is > >>>> disabled in BIOS, installation succeeds, and afterwards it's > >>>> possible to re-enable BCM43602 in BIOS and boot Qubes. > >>>> However, subsecuantly adding BCM43602 device to the sys-netvm > >>>> freezes the computer." > >>>> > >>>> -my boot setup has VT and VT-d options activated > >>>> > >>>> how can I make my network function ? > > > > Do you have serial console in this computer (for example in > > docking station)? That would greatly ease collecting more > > information. > > > > > > I tried to compile and install wl driver into sys-net VM. > > Unfortunately it didn't solve the problem, dom0 still freezes... > > :( > > > > I guess you have already tried with permissive mode, right? It seems > complicated to achieve. Also it is more related to Xen, Linux and the > card vendor than to Qubes. > > Regards. > -BEGIN PGP SIGNATURE- > Version: GnuPG v2 > > iQIcBAEBCAAGBQJXoziQAAoJEBQTENjj7QilhBoP/Rbf0Gdot6gHgFWQ0LYp/J0I > FT6T2FPp22KyA66TDxmJ2hHrb5t/q/boZW7RFO0xBO9/S9X6Ixml6YoaLy91aIeG > 3g7znHxBhHDPaUAqbrQDfVeL9lr4qul3qZivinbpI/giUCmHyLATlgtnBbWrYP4n > kQVxfhAUo0Wm/KPE0Ai0z3GWJ7Zcttzm4gmJOygpv+hczqD0UMYgL4+BaPNK+Ql8 > umLK1nm2D1ASLfHEzphbZrXeNWcHOAgkPW/5P6xm1snS91oV2bqmmCGAl525Q0YT > xptIfxcmBOFGZ+4eyq5/L422U9EAcOxsMGlAJKAWGSAG6nBkqxQO8CoLs+YG/SNy > 4Ktjfu8fCeMShdkCXbVv5aZ+HYay9u70Mk4EhrNm92/F4WBOJf9qNJHMOc6aW2CN > guW5103Ott8Q55S66yuqzK5YKkCoQJhSCDZqkxyZzorx19/gGWiZqcKqlVITnr87 > zfqTweP5AS5tnH9kItWmVGFWpHglogrwdLYD+S+Vu1w8uiIDbiEvyhzxxthxr80Q > 1/rcaybKB+LSZhus2b9jSonAtN1AjRqCGbYohfLxRmuls/PNgYmGgAjO9j/LybwC > wZ6Pw0Cew4E3+C7Bit42DxViw4jvREE29EqTkJVNMJsD0BFT6yjhIXInzZ4jCsTA > sOlajHZER0hTlXQIyiSh > =TivY > -END PGP SIGNATURE- Sure, I tried to solve this problem with permissive mode — dom0 still freezes... Is it possible to install Ubuntu on HVM VM, and then set this VM as my default sys-net? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/ee925425-9835-43d8-8161-65ef74291100%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Can NOT get Broadcom BCM43602 Wifi Card working , DELL XPS 15 9950- Qubes sys-net freezes/ crashes
On Thursday, August 4, 2016 at 11:08:32 AM UTC+3, Marek Marczykowski-Górecki wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA256 > > On Wed, Aug 03, 2016 at 07:05:00AM -0700, Michael wrote: > > Have a Broadcom BCM43602 Wifi Card in my dell xps 15 9950 > > > > and I downloaded Qubes Release 3.2-rc2 > > > > Problem: I can not connect to the internet cause my wifi card is not > > working with qubes: > > "If BCM43602, the wireless card is disabled in BIOS, installation succeeds, > > and afterwards it's possible to re-enable BCM43602 in BIOS and boot Qubes. > > However, subsecuantly adding BCM43602 device to the sys-netvm freezes the > > computer." > > > > -my boot setup has > > VT and VT-d options activated > > > > how can I make my network function ? > > Do you have serial console in this computer (for example in docking > station)? That would greatly ease collecting more information. > > - -- > Best Regards, > Marek Marczykowski-Górecki > Invisible Things Lab > A: Because it messes up the order in which people normally read text. > Q: Why is top-posting such a bad thing? > -BEGIN PGP SIGNATURE- > Version: GnuPG v2 > > iQEcBAEBCAAGBQJXovf6AAoJENuP0xzK19cszGgIAJBIKc8ja2GP4y2GZxSqnuHu > NMEceDcOOcHqOz8Pq/xFjzP6dBiof9R5ITZeUl7+Nol0vtN6sX/zXGrQu1ZvblxG > MnTCEzkQ6ZdAm0rwoaKykvblHeNyfZnk3jnrFImqyktIBqJoWa4gpBvz3eTfWOUE > vgsSxbmFlblzXt2SQuNlbRRI/UgqNx3GXRnJpUFNGfDWoW6sYTj/Re4LumF4bK4S > zU8rG5w6x3q2B35SotACdGDGgJhThDcR9rX0LfmBDljqyqYTCNtXfpGynUyycSq4 > 1t3BT1kfdsDAalKuoDjszW27bqLGlCbzJ4/JSYWku/aciLVksZdqa6BpcCRq3HI= > =cfQk > -END PGP SIGNATURE- I tried to compile and install wl driver into sys-net VM. Unfortunately it didn't solve the problem, dom0 still freezes... :( -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/7442a4d6-e62f-4d45-a7a3-0b273fa5ca78%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: Can NOT get Broadcom BCM43602 Wifi Card working , DELL XPS 15 9950- Qubes sys-net freezes/ crashes
Have the same issue on my XPS 9550. I tried to solve the problem via "PCI passthrough issues", but it didn't help... Still looking for a solution -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/6d90cc9f-dd78-4ddf-a3f5-d670b5157fd8%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Qubes 3.2 rc1 freezes during the setting up networking stage
Qubes 3.2 rc1 freezes during the first run on the "setting up networking" stage... :( As the system was unresponsive, I made a hard reset, but after rebooting the system wasn't loading at all (black screen after entering the disk password)... The model of my network card is Dell Wireless 1830 Any chance to fix that issue? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/7e72c90d-8564-47d5-8fd7-c59667a4aa0f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Problem with chrony package installing on Qubes Release 3.2-rc1
On Friday, July 8, 2016 at 1:05:52 AM UTC+3, R.B. wrote: > On 07/06/2016 04:52 PM, Andrew David Wong wrote: > > -BEGIN PGP SIGNED MESSAGE- > > Hash: SHA512 > > > > On 2016-07-06 04:40, Jeral A wrote: > >> Hi! > >> > >> I'm having problem during the Qubes Release 3.2-rc1 installation. > >> During the installation process error message displays, informing > >> me that the "chrony" package won't be installed. Here is the whole > >> error message text: You have specified that the package 'chrony' > >> should be installed. This package does not exist. Would you like to > >> ignore this package and continue with installation? > >> > >> If I press "Yes", then the installation process continues, but > >> after the system runs first time, another error message appears: > >> https://i.imgur.com/n1d7HOm.jpg > >> > >> After that the system starts normally, but I can't find any > >> preinstalled VMs (sys-net, sys-firewall, work, personal etc). > > Had a similar effect during my second install. At the time I had backups > of VM's waiting to get re-installed, so I didn't take note of which vm's > where missing at the time. I did see the chrony error. > What I did different in relation to the first install, was setting > timezone and keyboard. At the first install, I adjusted the settings > _after_ the install. Could be the two issues below are related? > > Maybe a fresh install with default settings? > > > > > https://github.com/QubesOS/qubes-issues/issues/2110 > > https://github.com/QubesOS/qubes-issues/issues/2147 > > > > Regards, > > RB Thanks a lot! I reinstalled the system without changing time zone and there was no error message about the chrony package! -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/f34d3b98-934b-4451-b174-74df90901879%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: Problem with chrony package installing on Qubes Release 3.2-rc1
And is it possible to install the default VMs (sys-net, sys-firewall etc) manually by running some script? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/3866f4db-ceaa-4b72-8538-19c309ef2fcd%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Problem with chrony package installing on Qubes Release 3.2-rc1
Hi! I'm having problem during the Qubes Release 3.2-rc1 installation. During the installation process error message displays, informing me that the "chrony" package won't be installed. Here is the whole error message text: You have specified that the package 'chrony' should be installed. This package does not exist. Would you like to ignore this package and continue with installation? If I press "Yes", then the installation process continues, but after the system runs first time, another error message appears: https://i.imgur.com/n1d7HOm.jpg After that the system starts normally, but I can't find any preinstalled VMs (sys-net, sys-firewall, work, personal etc). How can I solve that problem? Any chance to install chrony package manually? Thanks in advance. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/CAMeTv5K40911w9w%2B6Kr66d9CtbavDzL%3DLHO-qg78tARNcy1myQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
