4 template it works fine.
So which package or service am I missing?
Thx in advance
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr
p them anymore and save a lot of space by this.
Could you point to source for more information on your work?
I have not posted my work anywhere but I learned most things from this
repo https://github.com/Nekroze/qubes-salt
and of course the salt documentation and hints from John
Regards
t is
much bigger than the MB listed for dom0.
Is there a way to back it up right now with this method or do I manually
have to copy everything outside of dom0?
Thx in advance
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubsc
a NetVM template with the packages described under
https://www.qubes-os.org/doc/templates/fedora-minimal/ I can not install
tinyproxy and the notification-daemon because of the
qubes-templates-minimal-stub package. If I remove this it tries to
remove 147 packages including the Qubes ones which breaks
Hi John,
On 20.01.2017 10:26, john.david.r.smith wrote:
looks like my problem i posted here:
https://groups.google.com/d/msg/qubes-users/C1tJV4Ykgr8/5H09IT06CQAJ
i did not try it again since i had this problem.
missing in min are sudo and file (but after this i still get problems)
many thx
. This should be
documented in the Wiki until there is a solution for this.
I also ran into another issue configuring the repos with salt, because
yum.conf under Qubes seems to be different, but I guess this should be
easier to fix from our side.
Regards
--
You received this message because you
Hi Andrew,
thx for adding it to the documentation.
On 12.02.2017 03:22, Andrew David Wong wrote:
Thanks. Added:
https://github.com/QubesOS/qubes-doc/commit/308fa866e9533ccfb77b8c6c1b7b0f57446c7f85
Can you also add it to
https://www.qubes-os.org/doc/dispvm-customization/ to the bottom where
he salt vm package.
If I use the regular fedora-24 template it works fine.
So which package or service am I missing?
I have the package qubes-core-vm installed as described in the Wiki but
it still does not work. Can anybody at least reproduce the issue? The
qubes package seem to be the s
Hi,
I have an update.sls with the following content:
updates:
pkg.uptodate:
- refres: True
The problem is that if I run it, it always tells me that there are no
new packages although Qubes shows that there are with the green arrow
and if I run manually `dnf update` then packages
esh?
Thx for the reply. It is no copy and paste because it is in dom0. I use
the correct writing "- refresh: True".
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails fr
tomize disposable vm Wiki"?
Regards
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, se
to run iTunes on Linux in an AppVM? At least I am
not aware of it without a virtual machine with Windows.
Network would work in theory, but it would require a bridge, which is
not possible without patching in Qubes OS afaik.
Network backups also need to be setup for the first time via USB which I
to it.
So is there any solution which does not require another os or another
computer?
Thx in advance
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to q
.
One of the issues is that the minimal template can not use salt by
default
afaik but needs the package "qubes-mgmt-salt" which needs to be
installed
manually.
If you want to manage it from dom0, using qubesctl wrapper tool, you
don't need salt installed in target template at all
Hi,
Teamviewer 13 has finally a native Linux client, but that one does not
start in Qubes OS. I thought it might be related to Fedora 25, but it
does start in the Fedora 25 Live CD in VirtualBox on another machine. I
have also ugpraded the Templates to Fedora 26, but still have the same
Good evening,
I am not really technical.
I use qubes for some time now and I really have the feeling to "get back
the internet" a littly bit again.
I would love to support qubes more on a monthly basis. It is totally
worth it and you earn it.
_But_ I don't have a credit card an
and use Qubes as a classic
Internet-inna-box - ideal for such use, and very instructive. But I
guess that wasn't what you were interested in.
In normal use, both myself and colleagues have seen compromised qubes.
Hi Unman
How did you know you're qube was compromised, can you give some details
to the VM?
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.
But it does not work. In that, when I install it it breaks my debian-10
template beyond repair. I have tried to 'sudo apt-mark manual
package-name' all the 'qubes-*' and 'salt-*' packages but it makes no
difference. While the electrum installation is in progress it already
breaks. I can reboot
On 8/19/20 6:45 AM, 54th Parallel wrote:
On Wednesday, 19 August 2020 at 00:15:08 UTC+8 Robert Spigler wrote:
This is the real solution for the Intel problem :)
https://github.com/QubesOS/qubes-issues/issues/4318
I believe IBM stated they also have protections against the Rowhammer
attacks
On 8/26/20 12:54 PM, 'Chempes Amt' via qubes-users wrote:
Hi everybody,
I'm looking forward to buy a new laptop in order to run QubesOS with fluidity.
I have already had a look to HCL but there is no feedback about Dell Latitude
E5470 with Intel i7-6820HQ (with Intel HD Graphics 530). I
methodology, and plain good old advice.
I find it a bit funny that you are paranoid about some unknown adversary
tampering with your hardware in transit but you seem to use Google
products a lot.
--
You received this message because you are subscribed to the Google Groups
"qubes-users&q
an operating system from
Google, Microsoft, Apple, or any other tech giant, provides
"near-absolute" security I think you have been wholly misguided.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this grou
%
Is that a bug or does that have something to do with how and when
'/rw/config/qubes-bind-dirs.d/50_user.conf' is parsed? because this is
where '/etc/systemd/logind.conf' is binded.
--
You received this message because you are subscribed to the Google Groups
"qubes-users&q
On 8/20/20 9:06 AM, 'awokd' via qubes-users wrote:
Qubes:
I have an appVM that I changed into a dvm template, but I need to
increase the size of tmpfs /run/user/1000 from the default 10% of memory
size to e.g. 40% when an application in the dvm is opened (and the
disp gets created).
To do
On 8/20/20 7:50 PM, 'Crowphale' via qubes-users wrote:
Within the fedora-31 template, I installed Signal[1] messaging app, using Copr:
sudo dnf copr enable luminoso/Signal-Desktop
sudo dnf install signal-desktop
Then, I enabled Signal in "personal" domain, and restarted. However,
I don't know of a way to have this integrated but you can always store
your wifi passwords in your Keepass database on your vault VM as well.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop
Monday, May 7, 2018 at 5:57:09 AM UTC-7 Benoit Rebillon wrote:
Everything work fine. Except the video for very high definition (4K).
RhYzome
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group
35M 12K 35M 1% /run/user/1000< default
To change the default and increase the size of tmpfs to 40% you need to
edit /etc/systemd/logind.conf but since this is an appVM these changes
will be lost after reboot so I bind the file, create it, and change it
to 40%
sudo mkdi
the base template for my appVM and I choose to
add a new vpn connection from the network manager icon the dropdown on
the vpn connection wizard is blank, there is nothing to choose. Is the
configuration on debian different?
--
You received this message because you are subscribed to the Google
On 8/15/20 1:09 PM, 0spin...@gmail.com wrote:
On Saturday, August 15, 2020 at 1:03:31 PM UTC+2 Qubes wrote:
On 8/15/20 12:01 PM, wrote:
anyone have a clue why this is, and whether it can be disabled? It
happens
regardless of whether I have a netvm set for the template, and I have 0
tor
On 8/15/20 12:01 PM, 0spin...@gmail.com wrote:
anyone have a clue why this is, and whether it can be disabled? It happens
regardless of whether I have a netvm set for the template, and I have 0 tor
mirrors enabled afaict.
It is normal [behavior], Qubes uses a proxy service for updates
On 8/15/20 3:15 PM, unman wrote:
On Sat, Aug 15, 2020 at 09:45:03AM +0200, Qubes wrote:
I have more than one vpn connection configured using appVMs based on Fedora.
If you open the "Qube Settings" window you can add the "network-manager"
service on the "Services" t
because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/qubes-users/403cd241
On 8/4/20 8:29 PM, fiftyfourthparal...@gmail.com wrote:
Hi all,
Sorry for the recent spam--I've been spending a lot more time with Qubes
and coming across issues that I haven't seen mentioned here yet.
Here's another one:
If you disable passwordless root access in whonix-gw, tor control panel
6.7
kB/s | 16 kB 00:02
Qubes OS Repository for VM (updates)
1.5
kB/s | 3.8 kB 00:02
RPM Fusion for Fedora 32 - Free
1.3
kB/s | 3.1 kB
. Fedora is Redhat and
Redhat is IBM. So, in my world they can't be any trust in a company
especially such giants like IBM. I got branded with SuSe when they got
bought by Novel...
I would have thought that the best distribution for a project like
Qubes-OS would have been a fully independent
.
So this is a sizable hole in Qubes security. The best advice I can give
is to avoid using Fedora templates and pay attention to Qubes Security
Bulletins when they mention which dom0 components will be updated (and
pay close attention when running qubes-dom0-update to look for the
mentioned
On 6/23/20 5:37 PM, Sven Semmler wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
On 6/23/20 9:47 AM, Qubes wrote:
Would anybody here know how you apply a global dark theme to your
AppVM(s) for Qt (KDE) based applications like Amarok, Krusader,
etc?
Install qt5ct and style plugins
On 8/7/20 7:16 PM, Michael Carbone wrote:
On 8/6/20 3:09 PM, Qubes wrote:
Perhaps someone here can suggest something better than what I currently
have. A default Firefox on a default Fedora-32 template does not play
videos on something like Invidio.us. The video thumbnails display
everything
On 8/8/20 9:00 PM, Roland Forgel wrote:
On 2020-08-07 13:16, Michael Carbone wrote:
On 8/6/20 3:09 PM, Qubes wrote:
Perhaps someone here can suggest something better than what I currently
have. A default Firefox on a default Fedora-32 template does not play
videos on something like Invidio.us
On 7/31/20 6:50 PM, fiftyfourthparal...@gmail.com wrote:
On Friday, 31 July 2020 07:36:22 UTC+8, 54th Parallel wrote:
In dom0:
sudo qubes-dom0-updates --enablerepo=qubes-templates-community --action=list
qubes-template-*
or
sudo qubes-dom0-updates --enablerepo=qubes-templates-community
just so that I can
document it.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the
How does one go about connecting to an appvm from another device on your
LAN? Is there any documentation on this?
Just to avoid confusion a device on the same network as where sys-net
gets it's network from.
--
You received this message because you are subscribed to the Google Groups
"
On 8/3/20 1:05 PM, Chris Laprise wrote:
On 8/3/20 4:11 AM, fiftyfourthparal...@gmail.com wrote:
Your Qubes-VM-Hardening tool was one of the first things installed
into my first Qubes, but I'm still not very familiar with how it
works. I think vm-boot-protect might be blocking me from adding
On 8/5/20 12:21 AM, Ulrich Windl wrote:
On 7/8/20 8:24 AM, haaber wrote:
On 7/8/20 2:39 AM, Manuel Amador (Rudd-O) wrote:
On 20/06/2020 10.29, Logan wrote:
Hi Everyone,
Speaking with a colleague earlier today, I heard "Qubes is great, but
the no screenshots problem makes it a
are.
Basically, take this and paste it into dom0 then make it executable.
There'a also a handy test function. All credit goes to Andrea
Micheloni. Anyone have similarly handy modifications/scripts?
https://m7i.org/tips/qubes-update-all-templates/
IIRC there is an option somewhere in 'qubes
On 8/5/20 6:12 PM, fiftyfourthparal...@gmail.com wrote:
On Wednesday, 5 August 2020 02:29:46 UTC+8, 54th Parallel wrote:
Hi all,
Sorry for the recent spam--I've been spending a lot more time with Qubes
and coming across issues that I haven't seen mentioned here yet.
Here's another one
On 8/5/20 8:31 PM, Stumpy wrote:
On 2020-08-05 12:06, Stumpy wrote:
I have win installed on a drive with mbr, should I be able make a vhd
and convert that to a RAW and run it as a template in Qubes?
If i remember correctly gpt does not play well with qubes?
I guess more to the point, &quo
Did anybody else notice when updating to the Fedora 32 template, and
minimal template, the output from the Transaction Summary?
Here the output from the Fedora 32 template. Notice the installed size of 0:
Qubes OS Repository for Dom0 21
MB/s | 26 kB
you that explains it.
I still cannot get the Fedora-32-minimal template installed however. I
really regret accidentally interrupting the installation procedure with
'Ctrl + c'.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubs
On 7/13/20 3:15 PM, Andrew Sullivan wrote:
Download failed: Curl error (23): Failed writing received data to
disk/application for
https://mirrors.edge.kernel.org/qubes/repo/yum/r4.0/current/dom0/fc25/repodata/5c730001e14b36382c932b29b017f5fbb519aec538fc7017bab03317192743f5-filelists.xml.gz
to check that everything is working ok on
this test vm before changing all of my F-31 based qubes over to F-32.
I am unable to boot the test-fedora-32-template qube. After a while I
receive a system notification, the ones that pop up top right of the
screen, saying,
'Cannot connect to qrexec
On 7/14/20 9:57 PM, Qubes wrote:
I installed a clean Fedora-32 template today, but I have some issues and
I am not sure where to start.
After installing the F-32 template I switched the default-mgmt-dvm qube
to use the F-32 template.
I then created a new qube basing it on the F-32 template
On 7/4/20 3:44 AM, unman wrote:
On Fri, Jul 03, 2020 at 01:52:59PM +0200, Qubes wrote:
On 7/3/20 1:41 PM, Qubes wrote:
qubes-dom0-current/metalink
| 2.7 kB 00:00
https://mirror.linux.pizza/qubes-os.org/repo/yum/r4.0/current/dom0
On 7/3/20 11:30 AM, dhorf-hfref.4a288...@hashmail.org wrote:
On Fri, Jul 03, 2020 at 11:01:48AM +0200, Qubes wrote:
Using sys-whonix as UpdateVM to download updates for Dom0; this may take
some time...
error: could not delete old database at
/var/lib/qubes/dom0-updates/home/user/.rpmdbold.3146
.
Running transaction test
Transaction test succeeded.
Running transaction
Installing : qubes-template-fedora-32-minimal-4.0.1 [===
] 1/1 ^
Installing :
qubes-template-fedora-32-minimal-4.0.1-202006110332.noarch1/1
[ak47@dom0 Desktop]$
However, while that was running I was busy
The proxy get configured in '/etc/qubes-rpc/policy/qubes.UpdatesProxy'.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googl
On 7/3/20 12:03 PM, Qubes wrote:
On 7/3/20 11:30 AM, dhorf-hfref.4a288...@hashmail.org wrote:
On Fri, Jul 03, 2020 at 11:01:48AM +0200, Qubes wrote:
Using sys-whonix as UpdateVM to download updates for Dom0; this may take
some time...
error: could not delete old database at
/var/lib/qubes/dom0
On 7/3/20 1:41 PM, Qubes wrote:
qubes-dom0-current/metalink | 2.7 kB 00:00
https://mirror.linux.pizza/qubes-os.org/repo/yum/r4.0/current/dom0/fc25/repodata/repomd.xml:
[Errno 14] HTTPS Error 404 - Not Found
updates
On 6/29/20 10:34 PM, 'awokd' via qubes-users wrote:
Qubes:
On 6/29/20 10:03 PM, haaber wrote:
On 6/29/20 9:25 PM, Qubes wrote:
On 6/29/20 3:42 PM, Qubes wrote:
If I try to open a terminal in a dvm, I have tried in both the dvm's
that are installed by default (Disposable: fedora-31-dvm
On 7/1/20 3:51 AM, anon wrote:
Hello, is fedora-32 minimal adequate for use as sys-firewall? or is
there some reason that its better to use the full F32 template?
You can use the minimal template, but not as it is 'out-of-the-box', the
minimal template is missing Qubes specific packages
document that I open I have to resize the window
manually. Has anybody else experienced this, or also experiencing the
same right now. Possibly a fix?
I am on the latest version.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubs
On 7/8/20 5:40 PM, bradbury9 wrote:
Hi,
I have an integrated Intel graphics card and a Nvidia GTX 1080. I want to
set the integrated GPU as primary device, and create a windows standalone
VM (without qubes tools) for gaming.
My motherboard, don't know why, ignores when I set the integrated
don't think that can be changed.
If I need to mount the network share as user xyz, because user xyz has
certain permissions, is there a way to do that?
Regards
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from
Hi
I have two monitors connected to my Qubes laptop and it works really
well with one exception. When ever I launch certain programs, or a
settings window of that program, the window always opens on my laptop
screen, even though I have one of the external monitors configured in
System Tools
Hi
There is a very nice article in the Qubes docs,
https://www.qubes-os.org/doc/dark-theme/, explaining how to (manually)
enable a dark theme globally for your AppVMs. A fairly straight forward
settings might I add. But the setting only applies to GTK (GNOME) based
applications.
Would
On 6/25/20 6:30 PM, Qubes wrote:
My Qubes system was fully patched before today but today I received a
notification in the system tray that there is a new update available for
dom0 which I have installed.
After installing this update I can no longer install new software in any
of my
My Qubes system was fully patched before today but today I received a
notification in the system tray that there is a new update available for
dom0 which I have installed.
After installing this update I can no longer install new software in any
of my TemplateVMs. This is quite unexpected
/
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.c
' theme.
Thank you for your instructions, but I have a problem. I first thought
it was because I was using a Fedora-30 TemplateVM for my test so I
upgraded to Fedora-31, but same problem.
After installing the qt5 packages I edit the Qubes settings and I add
'Qt5 Settings' to the TemplateVMs
On 6/26/20 9:49 PM, qubes via qubes-users wrote:
On 6/13/20 5:36 PM, pudding wrote:
I updated dom0 from the security-testing repo today due to the new CPU
hardware bug. After finishing update and rebooting my laptop, it is
stuck on the black screen forever, and will not load the LUKS decryption
On 6/26/20 10:17 PM, 'awokd' via qubes-users wrote:
Should be able to boot with an older kernel.
https://www.qubes-os.org/doc/software-update-dom0/#changing-default-kernel
That requires decrypting and booting, but the boot failing and you going
to a recovery screen from where you can change
, it opens.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https:/
On 6/28/20 11:23 PM, Dave C wrote:
I'd like to
sudo apt remove yum
However, apt warns the following:
The following packages will be REMOVED:
qubes-core-agent-dom0-updates qubes-vm-recommended yum yum-utils
Have a look here,
https://www.qubes-os.org/doc/removing-templatevm-packages
On 6/29/20 10:03 PM, haaber wrote:
On 6/29/20 9:25 PM, Qubes wrote:
On 6/29/20 3:42 PM, Qubes wrote:
If I try to open a terminal in a dvm, I have tried in both the dvm's
that are installed by default (Disposable: fedora-31-dvm and
Disposable: whonix-ws-15-dvm) and one that I created on my own
On 6/29/20 3:42 PM, Qubes wrote:
If I try to open a terminal in a dvm, I have tried in both the dvm's
that are installed by default (Disposable: fedora-31-dvm and Disposable:
whonix-ws-15-dvm) and one that I created on my own by just creating a
qube and setting the "Disposable VM Tem
On 6/24/20 9:52 PM, Bostongeorge wrote:
I am new to this OS, wondering if its possible to install this with this
specs on a desktop i just made:
In terms of specifications your machine would certainly be able to
handle Qubes. If I was you I would just stick in Qubes installation
media
On 7/24/20 9:41 PM, 'awokd' via qubes-users wrote:
E:
Greetings,
I had a question about configuring the Whonix network connection. It
has to do with a possible timer associated with an exterior facing IP
address. How can a exiting IP become static. On several occasions,
websites log out
I created a offline and watching only (Electrum) bitcoin wallet as
describes in the Qubes docs,
https://www.qubes-os.org/doc/split-bitcoin/, but I wanted to find out of
I did something wrong or if what I am seeing is in fact correct.
If I look at my watching only wallet at the bottom right
explorer:
- https://www.blockchain.com/btc/address/
Would anybody have an idea what a minimal template might be missing in
this particular usecase?
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this grou
the layout
then enable this monitor again and again rearrange the layout. Finally I
can get all 3 working but it is not a simple click to enable and that is
that.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this grou
' on the disk squigly goop. The
blank password in this case is not a problem.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@google
to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/qubes-users/0a24d013-6bca-4d66-3e4c-1d6ab13fd3e8%40ak47.co.za.
to the graphics
buffer. It could be that you may be experiencing this problem.
https://www.qubes-os.org/doc/gui-configuration-and-troubleshooting/
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiv
depending on the
panel's orientation).
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To view this
On 7/15/20 12:18 AM, Qubes wrote:
On 7/14/20 9:57 PM, Qubes wrote:
I installed a clean Fedora-32 template today, but I have some issues
and I am not sure where to start.
After installing the F-32 template I switched the default-mgmt-dvm
qube to use the F-32 template.
I then created a new
Where would one look to see what templates are all currently available
for installation.
Whether that would be in Current, Testing, Development.
Is there a list maintained somewhere?
--
You received this message because you are subscribed to the Google Groups
"qubes-users&q
On 7/30/20 9:42 PM, Johannes Graumann wrote:
On Thu, 2020-07-30 at 17:36 +0200, Qubes wrote:
On 7/30/20 4:33 PM, Johannes Graumann wrote:
Hi,
I'm fond of using torbrowser in a whonix-ws-15 based sip VM for all
browsing that possibly works.
In parallel I manage all authentication using
On 7/30/20 9:50 PM, Johannes Graumann wrote:
On Thu, 2020-07-30 at 21:48 +0200, Qubes wrote:
On 7/30/20 9:42 PM, Johannes Graumann wrote:
On Thu, 2020-07-30 at 17:36 +0200, Qubes wrote:
On 7/30/20 4:33 PM, Johannes Graumann wrote:
Hi,
I'm fond of using torbrowser in a whonix-ws-15 based sip
On 7/20/20 5:24 PM, ludwig jaffe wrote:
So never ever let qubes fill your disk(s) completely. Leave some room.
That should not be a warning it should be common sense, and it is true
for any storage device whether that storage device is used by an OS or
for general storage.
--
You received
On 7/4/20 1:07 PM, Qubes wrote:
On 7/4/20 11:11 AM, Jarrah wrote:
What do you mean I am trying to install the Fedora-32 template in
dom0? I am issuing the command to do it from dom0 yes, but I am not
trying to install it in dom0 itself as the dom0 OS. I am not
performing an upgrade from 31
then be identified and tracked (by means of fingerprinting).
Customizing TOR is a bad idea. Just leave it stock standard.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
Hi
Can anybody on here perhaps recommend another split coin wallet for
other crypto currencies other than Electrum that we already use on
Qubes, but Electrum being Bitcoin specific.
--
You received this message because you are subscribed to the Google Groups
"qubes-users&q
'awokd' via qubes-users wrote:
Qubes:
Is there Qubes documentation outlining the steps to increase the size
of /boot, or does one follow general disk management, with tools like
using GParted for example. Although the disk is a LUKS encrypted
volume. Can one decrypt, use GParted to resize
'awokd' via qubes-users wrote:
Qubes:
Are you currently running it, can you give any feedback?
Yes, running 4.1. Haven't tried gui or audio domains yet, but so far
everything works fine. Think a couple people have run into no QWT being
available for 4.1, but it's not something I need
Andrew David Wong wrote:
Dear Qubes Community,
The Xen Project has released one or more Xen Security Advisories (XSAs).
The security of Qubes OS *is affected*.
Therefore, *user action is required*.
When I run update using the orange sun icon the dom0 update finishes
with the following text
'awokd' via qubes-users wrote:
Qubes:
And that is it. When I run update from CLI I get this,
"Error Summary
-
Disk Requirements:
At least 33MB more space needed on the /boot filesystem."
Is that normal behavior? The disk /boot lives on is not full, the
'awokd' via qubes-users wrote:
The steps in
https://linuxconfig.org/how-to-remove-old-unused-kernels-on-centos-linux
should work, except the one about package-cleanup command. It's OK to
skip that step as removing one by one will work.
Thank you. I didn't know you do it through the package
be -a maybe?
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.
1 - 100 of 4382 matches
Mail list logo