[qubes-users] Installation on MacBook Pro
Hi, I am trying to install Qubes on Macbook Pro(15,5) 2019 Model but I can't get past the boot screen. I burned an image using Etcher but when I try to boot my Mac, the screen goes blank and the system freezes. I don't see any errors whatsoever. Any suggestions on how to troubleshoot and get it running will be greatly appreciated. Best regards -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/255611f2-fb22-440e-a30f-b4934a20b0c3n%40googlegroups.com.
Re: [qubes-users] How can I install new software in DOM0 ?
Thank you very much for your answer but the guide didn't help. The software I want to install is not in the repos and I cannot add a new repo. I have little knowledge, it would be great if you could point out how I can install directly from an new repo. On Sunday, August 8, 2021 at 12:40:22 PM UTC+3 a...@qubes-os.org wrote: > On 8/7/21 5:27 AM, qubes user wrote: > > How can I install a screen recorder program in DOM0. I tried to install > > "OBS" or "simplescreenrecorder" but everything I tried failed. Could you > > please explain how I can install a program in dom0? > > > > https://www.qubes-os.org/doc/how-to-install-software-in-dom0/ > > -- > Andrew David Wong > Community Manager > The Qubes OS Project > https://www.qubes-os.org > > -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/afc6c1c3-9ebe-41e4-8313-620d15109397n%40googlegroups.com.
[qubes-users] Re: How can I install new software in DOM0 ?
> > I am aware of the security risk it poses, I only need to install software > because I have to record screen. I want to learn how I can add a new repo > and download software from this repo. > -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/7bfa5e67-b3ec-455e-bcf9-b24bbc8f0b64n%40googlegroups.com.
[qubes-users] How can I install new software in DOM0 ?
How can I install a screen recorder program in DOM0. I tried to install "OBS" or "simplescreenrecorder" but everything I tried failed. Could you please explain how I can install a program in dom0? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/c4fc3b9d-cfd1-4830-864e-d115e04a8d42n%40googlegroups.com.
[qubes-users] Qubes won't boot
Hello, I was using Qubes for about 3 months and didn't use it last month. Yesterday it wouldn't boot. Using Qubes rescue didn't help. After typing passphrase it says Linux system not found so it doesn't mount. So i found a way to mount disk manually. Going through directories found out that boot folder is empty. Also if that is not an option i want to save my files but seems like private.img are missing. There is only icon.png file in VM folders. Is there any way to recover boot files so i can boot it again or at least save files from VMs somehow? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/trinity-b05fda5f-b9b7-48bc-94c1-aa98fb89ee53-1620324425410%403c-app-mailcom-lxa10.
Re: [qubes-users] How do I get Started?
Hi everyone, Thank you for all your help and discussion. I posted the HCL for the device I'm troubleshooting -- the latest Lenovo Flex 14 with the i5-10210U. You can find it here: https://groups.google.com/forum/#!topic/qubes-users/kamMImlGMNQ I'm guessing the plan is to set up networking, update the templates and dom0, then troubleshoot the trackpad and external monitor. I plugged in the monitor with HDMI and it didn't show up under System Tools > Display, and my touchpad doesn't show up under System Tools > Mouse and Touchpad. . Here are the outputs of some of the suggested commands in my sys-net terminal. My sys-net is based of Fedora 29. > [user@sys-net ~]$ iwconfig > lono wireless extensions. > > vif3.0no wireless extensions. > > [user@sys-net ~]$ ifconfig > lo: flags=73mtu 65536 > inet 127.0.0.1 netmask 255.0.0.0 > inet6 ::1 prefixlen 128 scopeid 0x10 > loop txqueuelen 1000 (Local Loopback) > RX packets 1606 bytes 129550 (126.5 KiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 1606 bytes 129550 (126.5 KiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > vif3.0: flags=4163 mtu 1500 > inet 10.137.0.5 netmask 255.255.255.255 broadcast 0.0.0.0 > inet6 fe80::fcff::feff: prefixlen 64 scopeid > 0x20 > ether fe:ff:ff:ff:ff:ff txqueuelen 32 (Ethernet) > RX packets 1093 bytes 67624 (66.0 KiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 170 bytes 15418 (15.0 KiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > [user@sys-net ~]$ iwlist > Usage: iwlist [interface] scanning [essid NNN] [last] > [interface] frequency > [interface] channel > [interface] bitrate > [interface] rate > [interface] encryption > [interface] keys > [interface] power > [interface] txpower > [interface] retry > [interface] ap > [interface] accesspoints > [interface] peers > [interface] event > [interface] auth > [interface] wpakeys > [interface] genie > [interface] modulation > > [user@sys-net ~]$ lsusb -v > > Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd > Couldn't open device, some information will be missing > Device Descriptor: > bLength18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass0 > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize064 > idVendor 0x0627 Adomax Technology Co., Ltd > idProduct 0x0001 > bcdDevice0.00 > iManufacturer 1 > iProduct3 > iSerial 5 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 0x0022 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 7 > bmAttributes 0xa0 > (Bus Powered) > Remote Wakeup > MaxPower 100mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 3 Human Interface Device > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > HID Device Descriptor: > bLength 9 > bDescriptorType33 > bcdHID 0.01 > bCountryCode0 Not supported > bNumDescriptors 1 > bDescriptorType34 Report > wDescriptorLength 74 > Report Descriptors: >** UNAVAILABLE ** > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes3 > Transfer TypeInterrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0008 1x 8 bytes > bInterval 4 > > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Couldn't open device, some information will be missing > Device Descriptor: > bLength18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass9 Hub > bDeviceSubClass 0 > bDeviceProtocol 0 Full speed (or root) hub > bMaxPacketSize064 > idVendor 0x1d6b Linux Foundation > idProduct 0x0002 2.0 root hub > bcdDevice4.14 > iMa
[qubes-users] HCL - Lenovo 81XG, Flex 14 inch, Model 81XG000EUS
*Installation* Installed to hard drive. Secure boot was disabled. Legacy boot mode can be enabled, but EUFI works fine; no troubleshooting was required. Trackpad/touchpad didn't work during installation. I used a Logitech M510 USB mouse. To make the hard drive visible during installation, in the BIOS, change the Storage Controller from RST to AHCI. USB Qubes not configurable from initial configuration menu. The keyboard could be a USB keyboard. Or maybe the USB Mouse prevented me from configuring the USB Qubes. On start-up and shut-down, I get > [FAILED] Failed to start Load Kernel Modules. > See 'systemctl status systemd-modules-load.service' for details. > *Works without further troubleshooting* Lock screen *Requires Troubleshooting* Wifi Trackpad/touchpad Suspend Touchscreen HDMI external display Troubleshooting steps may be similar to those listed at https://groups.google.com/forum/#!msg/qubes-users/zCLYDy1bRKw/E58GDOgRBAAJ *Untested* Fingerprint scanner Bluetooth Camera Ethernet Microphone (although it shows up in devices with other USB drives) *Thoughts* There appears to be no TPM. Built-in keyboard and USB mouse are a bit laggy. This model uses a 10th gen i5-10210U processor; a newer model. This was the cheapest 16gb ram laptop available at Costco.com at this time at $721 after tax and shipping. Making newer, cheaper models compatible with Qubes could be a way to bring more new users to the OS. *Purchase Link:* https://www.costco.com/lenovo-flex-14-2-in-1-touchscreen-laptop---10th-gen-intel-core-i5-10210u---1080p.product.100517162.html -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/b68621d3-a579-4473-b55a-d1e6f73f9abb%40googlegroups.com. Qubes-HCL-LENOVO-81XG-20191204-102948.yml Description: Binary data
Re: [qubes-users] How do I get Started?
Thank you for your help. On Tuesday, December 3, 2019 at 12:10:11 PM UTC-8, Claudia wrote: > > Qubes User: > > I just installed Qubes on a new laptop. I'm trying to do some basic > things > > not listed on https://www.qubes-os.org/getting-started/ > > > > 1. How do I get connected to my wi-fi? > > The networkmanager applet should appear in the task tray (next to the > clock). Just click on that and select a network. Make sure sys-net is > running. Can you manually launch networkmanager in sys-net? Do you see > your network card in iwconfig, ifconfig, lsusb, lspci, in sys-net? > > When I click the applet, I see: Ethernet Network device not managed VPN Connections > I don't see my WiFi networks. When I launch network manager in sys-net, I tried to manually input the information for my WiFi (with the SSID and WPA2/Personal), but it doesn't connect after. When I run "lsusb" in the dom0 terminal, I get: Realtek Semiconductor Corp VIA Labs, Inc. Linux Foundation 3.0 root hub blank Chicony Electronics Co., Ltd VIA Lbs, Inc. Logitech, Inc. Unifying Receiver (for my usb mouse) Terminus Technology Inc. VIA Labs, Inc. Intel Corp. Linux Foundation 2.0 root hub None of these are my network cards, right? > > 2. How do I use an external display with HDMI? (just plugging it in > doesn't > > work for me) > > What do you see when you plug it in? "No signal"? Blank screen? > > You might have to do some configuration in XFCE. Look under system tools > for monitor/screen settings. Otherwise, you could try installing KDE. > > https://www.qubes-os.org/doc/kde/ > > Note that a lot of hardware features don't always work in Qubes. HDMI is > not tested very often by Qubes users, so I don't know if HDMI usually > works or not. > > Does it work when running a Fedora 25 live CD? Did you have it working > on this machine on any other operating systems? > When I plug in my HDMI, nothing happens. On Windows, the external display works when I plug it in. I can try running Fedora on a live usb to see what happens. > > > 3. How do I reduce the lag on my USB mouse? > > I'm afraid I don't know much about this. Are you using dom0 or sys-usb? > Is anything else laggy? Does the touchpad (if any) work alright? > > You can try temporarily disabling sys-usb so devices are attached to > dom0. See if it works any better that way. > https://www.qubes-os.org/doc/usb-qubes/#removing-a-usb-qube I don't think I have usb-qubes enabled. I wasn't able to enable them after installation, maybe because I have a USB keyboard. However, my touchpad/trackpad doesn't work. What can I do about that? > > > - > This free account was provided by VFEmail.net - report spam to > ab...@vfemail.net > > ONLY AT VFEmail! - Use our Metadata Mitigator to keep your email out of > the NSA's hands! > $24.95 ONETIME Lifetime accounts with Privacy Features! > 15GB disk! No bandwidth quotas! > Commercial and Bulk Mail Options! > -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/38321cc0-496a-4811-9cf7-46249e16ee4b%40googlegroups.com.
[qubes-users] How do I get Started?
I just installed Qubes on a new laptop. I'm trying to do some basic things not listed on https://www.qubes-os.org/getting-started/ 1. How do I get connected to my wi-fi? 2. How do I use an external display with HDMI? (just plugging it in doesn't work for me) 3. How do I reduce the lag on my USB mouse? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/a48b2391-9159-46b3-b465-9ba3b6066938%40googlegroups.com.
[qubes-users] Re: HCL - Thinkpad X1 Carbon 5th gen - Qubes 4.0-rc3
How do you add psmouse.synaptics_intertouch=1 to the dom0 kernel parameter? On Friday, December 15, 2017 at 5:57:20 PM UTC-8, Marek Marczykowski-Górecki wrote: > > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA256 > > On Sat, Dec 16, 2017 at 01:54:09AM +0100, Marek Marczykowski-Górecki > wrote: > > Hi, > > > > I have some initial comments about Qubes 4.0rc3 on Lenovo Thinkpad X1 > > Carbon 5th gen. I'll dig further into issues listed below. But for now I > > wouldn't call it "works out of the box", unfortunately :/ > > > > - EFI installer do not boot - gets back into grub instantly, > /noexitboot > >/mapbs do not help > > - legacy mode install works fine (although I've noticed small graphics > >glithes once or twice) > > - at next boot grub is horribly slow (you can see drawing each char) > > - system starts with default kernel (4.9.56) > > - trackpoint/touchpad do not work: > > > > psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte > 1 > > psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte > 1 > > psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte > 1 > > psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte > 1 > > psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte > 1 > > psmouse serio1: issuing reconnect request > > psmouse serio1: synaptics: queried max coordinates: x [..5678], y > [..4758] > > psmouse serio1: synaptics: queried min coordinates: x [1266..], y > [1094..] > > Fixed by adding psmouse.synaptics_intertouch=1 dom0 kernel parameter > (available in 4.14+). > > > > > - suspend: hang on suspend (green light flash quickly) > > > > Next step: upgrade dom0 (only!) kernel to 4.14.6 > > (https://github.com/QubesOS/qubes-linux-kernel/pull/13). You need to > > build it yourself, there is no > > binary package available, yet. > > > > Then add iwlmvm and iwlwifi to /rw/config/suspend-module-backlist in > sys-net > > > > - this fixed suspend issue, wireless also works after suspend > > - touchpad/trackpoint still do not work > > > > Other issues: > > - https://github.com/QubesOS/qubes-issues/issues/3108 > > > > > > Untested: > > - mic > > - camera > > - ethernet > > - thunderbolt (and do not plan to) > > - WiGig (does it even have Linux support?) > > - bluetooth > > - NFC > > - fingerprint reader (do not plan to test) > > > > Attached hardware info. > > > > > > > > - -- > Best Regards, > Marek Marczykowski-Górecki > Invisible Things Lab > A: Because it messes up the order in which people normally read text. > Q: Why is top-posting such a bad thing? > -BEGIN PGP SIGNATURE- > Version: GnuPG v2 > > iQEcBAEBCAAGBQJaL3qDAAoJENuP0xzK19csKzYH/iu1x869BqLeOkf2tthetBaK > njaKZb9SfP8QvX8XUPZcVOwCOldFuHjzGGf+zrCM3IRtsUKf3Ry6suKH7YRrmP2a > qUScHkusfDePDH47XpFnKvE2vRINCbd6j709dttr/GZtAHTKx8J6B6ZDuQl1YkSH > gqyQkW0FDtC3jEEQnAyh5249OwJjxW56EM/WvlVOqykBkx7GkmTPGk5PSVB76i+b > W3QFlj+XEmryMSbp51Nzzb1yuK7nkMiKcZBC74bg+/jOjipH/j4vphAnzMzZ/5MK > wi3vXzjf4G+M+IrsGbSOerURadQMsQTiEwVaeydquQOc7Op72vD5LsvoJUhOu8U= > =aCgK > -END PGP SIGNATURE- > -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/c97c0518-a3ef-419e-9efe-da562300c8f3%40googlegroups.com.
[qubes-users] Docker Bridge Mode Not Working in Qubes
Hi, So basically: docker run -it --network=bridge ubuntu No internet... docker run -it network=host ubuntu Internet! (apt-get update works) Bridged mode works on my laptop but not on Qubes with the same version of docker. (18.09.1 from docker.io package) I'm new to docker so if I have any misconceptions then please forgive me. I also read this: https://www.qubes-os.org/doc/network-bridge-support/ and am not sure if it is relevant to the situation and if so how I can get it working with that. Thank you. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/3424181552870329%40iva3-a2a8aac410a1.qloud-c.yandex.net. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Time Sync Failed and one other problem
I have two problems right now in Qubes. When I do qubes-dom0-update, the first thing it says is 'Time Sync Failed! - Exiting'. When I do qvm-sync-clock, it says the same thing. I did timedatectl set-ntp 1 to see if that would fix it, same error. The other problem also comes up when I run qubes-dom0-update. Qubes is still downloading updated for Fedora 23 when I've had Fedora 24 for months. I don't have the Fedora 23 template anywhere on the machine (that I know of). To clarify what I mean, it is NOT installing updates for Fedora 24 (which I am using), it is looking for updates for Fedora 23. I've had many problems since installing the Fedora 24 template but I just noticed this one. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/a5a56999-dd66-452d-82ff-34c5ebebc9e9%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Turn standalone VM to a template VM
Hello, I have a Standalone Windows 7 VM that I want to convert to a Template VM so I can deploy clones from it like in vSphere Server. Is there a way to convert an existing Standalone VM to a Template VM? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/e356b6d2-9363-4d61-a48d-5f2d2de54ea3%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: Remove menu entries in XFCE on Qubes
My mistake, it was in here > ~/.local/share/applications/ I got rid of it by doing rm fedora-23* Thanks for the help. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/fb834344-e5f8-4d68-8b2b-ebcfc5575cac%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: Remove menu entries in XFCE on Qubes
On Wednesday, February 1, 2017 at 1:21:18 PM UTC-5, raah...@gmail.com wrote: > On Tuesday, January 31, 2017 at 10:36:03 AM UTC-5, qubes-user-000 wrote: > > I'm trying to remove an entry in the applications menu for fedora 23 that's > > still there from when I updated to 24. How can I do this? > > I think its alt f3 to get the editing mode for start menu. This works to hide it but hidden is still there in a sense. Seems a little goofy that there's no way to do this, no? I understand Qubes has its parts separate intentionally but I think there's a problem in some places, like this one; where you aren't able to do something as simple as remove a menu entry. Just my 2c if there really is no way to do this properly. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/f844d4ad-0e6e-408c-8554-4e26f362dcf6%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.