[qubes-users] Firewall Question - accessing LAN when appvm is using vpnVM?

2021-07-21 Thread Stumpy
I prefer to us a vpn proxy when possible so most of my appvms are setup to use a vpn proxy vm. The problem is a few of my appvms need access to my home server on my LAN but so far I cant seem to figure out how to access my server on an appvm when it is connected to a vpnvm. Somehow this seems

Re: [qubes-users] VPN up/down pop up not working?

2021-06-24 Thread Stumpy
On 2021-06-23 15:30, Stumpy wrote: On 2021-06-23 04:58, Sven Semmler wrote: Hi @stumpy, I don't know what your goals are exactly, but if you'd like a debian-minimal based qube to connect to a OpenVPN than this will work for sure: Template (cloned from debian-minimal): apt install qubes-repo

Re: [qubes-users] VPN up/down pop up not working?

2021-06-23 Thread Stumpy
On 2021-06-23 04:58, Sven Semmler wrote: Hi @stumpy, I don't know what your goals are exactly, but if you'd like a debian-minimal based qube to connect to a OpenVPN than this will work for sure: Template (cloned from debian-minimal): apt install qubes-repo-contrib apt update apt install qubes

Re: [qubes-users] VPN up/down pop up not working?

2021-06-21 Thread Stumpy
On 2021-06-21 17:20, unman wrote: On Mon, Jun 21, 2021 at 11:53:17AM +, Stumpy wrote: On 2021-06-18 03:15, Sven Semmler wrote: > On 6/17/21 8:59 AM, Stumpy wrote: > > I guess I will just grin and bear it as its not crucial, I was just > > hoping the fix might be sim

Re: [qubes-users] VPN up/down pop up not working?

2021-06-21 Thread Stumpy
On 2021-06-18 03:15, Sven Semmler wrote: On 6/17/21 8:59 AM, Stumpy wrote: I guess I will just grin and bear it as its not crucial, I was just hoping the fix might be simple like Sven's suggestion (thanks for the suggestion though Sven!). No problem. To further drill down and what could

Re: [qubes-users] VPN up/down pop up not working?

2021-06-17 Thread Stumpy
On 2021-06-17 16:29, unman wrote: On Thu, Jun 17, 2021 at 10:55:46AM +, Stumpy wrote: On 2021-06-17 07:42, Sven Semmler wrote: > Do you have a notification daemon installed? If unsure, install and > run dunst and see if it works then. Thanks. I pretty much installed the packages

Re: [qubes-users] VPN up/down pop up not working?

2021-06-17 Thread Stumpy
On 2021-06-17 07:42, Sven Semmler wrote: > Do you have a notification daemon installed? If unsure, install and > run dunst and see if it works then. Thanks. I pretty much installed the packages listed as being needed for centos minimal to function as a proxy [1], one of them being

Re: [qubes-users] VPN up/down pop up not working?

2021-06-16 Thread Stumpy
On 2021-06-11 15:20, Stumpy wrote: I managed to setup vpn proxies using the Set up a ProxyVM as a VPN gateway using iptables and CLI scripts [1] instructions which worked in so far as I now have traffic going through them but the icons are showing up as "network disabled" (see attachm

Re: [qubes-users] snap issues, related to the filesystem outside of ~/ ?

2021-06-11 Thread Stumpy
On 2021-06-11 17:25, unman wrote: On Thu, Jun 10, 2021 at 09:45:59PM +, Stumpy wrote: I tried installing snaps in a debian template and then but while it ran fine the first time, after restarting it stopped working. As I wanted to be sure it was not a qubes issue I posted

[qubes-users] Direct link to the "Installing-contributed-packages" page from the docs page?

2021-06-11 Thread Stumpy
I was just curious why the Installing-contributed-packages [1] page isnt accessible/have an entry in the main docs [2] page? I suppose its not a big deal as i know its there but I have ended up bookmarking it so i didnt have to go to either the news page or dig down in the docs How to

[qubes-users] VPN up/down pop up not working?

2021-06-11 Thread Stumpy
I managed to setup vpn proxies using the Set up a ProxyVM as a VPN gateway using iptables and CLI scripts [1] instructions which worked in so far as I now have traffic going through them but the icons are showing up as "network disabled" (see attachment) and I do not get any sort of

[qubes-users] snap issues, related to the filesystem outside of ~/ ?

2021-06-10 Thread Stumpy
I tried installing snaps in a debian template and then but while it ran fine the first time, after restarting it stopped working. As I wanted to be sure it was not a qubes issue I posted on the snapcraft forum [1] and the question they asked that made me think it was qubes related was _"Is

Re: [qubes-users] Unable to get VPN to ping out. Unable to set up ProxyVM as sys-vpn

2021-03-02 Thread Stumpy
On 3/1/21 7:36 PM, 'awokd' via qubes-users wrote: roberto re: I've looked around but I can't seem to find any up-to-date, uncomplicated step by step guide to get a fail closed, antileak VPN tunnel environment. https://github.com/QubesOS-contrib/qubes-tunnel Sorry I dont have any words of

[qubes-users] How screwed am I? (corrupt backup files?)

2021-03-02 Thread Stumpy
I have a bunch of backups... all in one place... and it seems most of them have been borked in some way. I have tried to restore 50gb backups using qube manager and end up with empty appvms (that show a size of 0mb in qubes manger and as far as i can tell are empty when i start them up and

Re: [qubes-users] Cheap laptops that run Qubes

2021-01-07 Thread Stumpy
On 1/5/21 7:59 PM, unman wrote: On Sun, Jan 03, 2021 at 09:06:09AM -, anonymous9959rhek via qubes-users wrote: I'm looking for a laptop that can run Qubes without stress. I want the cheapest one possible. Please let me know which one I should get. "cheap" and "stress" are relative. You

Re: [qubes-users] Still not able to install rofi in dom0? (getting "ERROR: could not verify one or more packages" for multiple packages, not only rofi)

2021-01-04 Thread Stumpy
rofi. Stumpy, dude, thank you for your perseverance! ;-) Your findings combined with the official Qubes documentation solved it. Apparently importing the contrib key is necessary for the install to succeed. So after importing with: sudo rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-qubes-4-contrib

Re: [qubes-users] Still not able to install rofi in dom0? (getting "ERROR: could not verify one or more packages" for multiple packages, not only rofi)

2021-01-04 Thread Stumpy
On 1/1/21 12:06 PM, Stumpy wrote: On 12/27/20 11:50 AM, Stumpy wrote: I was trying to install rofi earlier and ended up giving up hoping an update might change things? Well I just tried again and got a different error (before I was getting an error that was something like rofi not found i

Re: [qubes-users] Installing qubes-tunnel on fedora-32-minimal?

2021-01-02 Thread Stumpy
On 12/19/20 11:54 AM, Chris Laprise wrote: On 12/16/20 12:16 PM, Stumpy wrote: Firstly, I was able to get the user contrib qubes tunnel going on a fedora-32-minmal template and it was great! (great meaning so much easier than the more manual methods; though its still not clear to me

Re: [qubes-users] Still not able to install rofi in dom0? (getting "ERROR: could not verify one or more packages" for multiple packages, not only rofi)

2021-01-01 Thread Stumpy
On 12/27/20 11:50 AM, Stumpy wrote: I was trying to install rofi earlier and ended up giving up hoping an update might change things? Well I just tried again and got a different error (before I was getting an error that was something like rofi not found i think). Now I am getting: sudo qubes

[qubes-users] Still not able to install rofi in dom0?

2020-12-27 Thread Stumpy
I was trying to install rofi earlier and ended up giving up hoping an update might change things? Well I just tried again and got a different error (before I was getting an error that was something like rofi not found i think). Now I am getting: sudo qubes-dom0-update rofi Using sys-whonix as

[qubes-users] Possible to run something like recoll in dom0 to index appvms?

2020-12-27 Thread Stumpy
I try to be organized and make sure all files are in the appvms they are supposed to be but while it works most of the time it doesnt always. As a result I was wondering if it was possible (aknowledging one would have to trust recoll, its in the fedora repo for what thats worth) if it was

[qubes-users] Possible to run something like recoll in dom0 to index appvms?

2020-12-23 Thread Stumpy
I try to be organized and make sure all files are in the appvms they are supposed to be but while it works most of the time it doesnt always. As a result I was wondering if it was possible (aknowledging one would have to trust recoll, its in the fedora repo for what thats worth) if it was

Re: [EXT] [qubes-users] crontab backups?

2020-12-21 Thread Stumpy
On 12/20/20 6:54 PM, Ulrich Windl wrote: On 12/17/20 2:32 PM, Stumpy wrote: I havent played with crontab in forever, and I cant code at all, but I really wanted to try to automate my backups a wee bit. I made a basic script (qubackup) in the ~/ dom0 directory: /home/bob/qvm-backup --yes

Re: [qubes-users] Installing Rofi on dom0 via contributed packages?

2020-12-19 Thread Stumpy
On 12/19/20 8:21 AM, Stumpy wrote: On 12/17/20 2:38 PM, Rusty Bird wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Rusty Bird: Stumpy: On 12/16/20 2:40 PM, Frédéric Pierret wrote: Fedora 32 version for qubes-tunnel is currently uploading to stable. Error: Unable to find a match

Re: [qubes-users] Installing Rofi on dom0 via contributed packages?

2020-12-19 Thread Stumpy
On 12/17/20 2:38 PM, Rusty Bird wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Rusty Bird: Stumpy: On 12/16/20 2:40 PM, Frédéric Pierret wrote: Fedora 32 version for qubes-tunnel is currently uploading to stable. Error: Unable to find a match: qubes-tunnel So perhaps its

Re: [qubes-users] crontab backups?

2020-12-17 Thread Stumpy
On 12/17/20 8:47 AM, haaber wrote: On 12/17/20 2:32 PM, Stumpy wrote: I havent played with crontab in forever, and I cant code at all, but I really wanted to try to automate my backups a wee bit. I made a basic script (qubackup) in the ~/ dom0 directory: /home/bob/qvm-backup --yes --verbose

[qubes-users] crontab backups?

2020-12-17 Thread Stumpy
I havent played with crontab in forever, and I cant code at all, but I really wanted to try to automate my backups a wee bit. I made a basic script (qubackup) in the ~/ dom0 directory: /home/bob/qvm-backup --yes --verbose --compress --passphrase-file ~/PASSPHRASE_FILE.txt

Re: [qubes-users] Installing Rofi on dom0 via contributed packages?

2020-12-17 Thread Stumpy
On 12/16/20 2:40 PM, Frédéric Pierret wrote: Le 12/16/20 à 7:42 PM, Stumpy a écrit : On 12/16/20 1:26 PM, Rusty Bird wrote: Stumpy: [bob@dom0 ~]$ sudo qubes-dom0-update qubes-rofi [...] No Match for argument qubes-rofi The package is called just "rofi": https://contrib.qubes-

Re: [qubes-users] Installing Rofi on dom0 via contributed packages?

2020-12-16 Thread Stumpy
On 12/16/20 1:26 PM, Rusty Bird wrote: Stumpy: [bob@dom0 ~]$ sudo qubes-dom0-update qubes-rofi [...] No Match for argument qubes-rofi The package is called just "rofi": https://contrib.qubes-os.org/yum/r4.0/current/dom0/fc25/rpm/ which seems to be similar to an error i get

[qubes-users] Installing Rofi on dom0 via contributed packages?

2020-12-16 Thread Stumpy
So i tried, and think I suceeded in installing qubes-repo-contrib on dom0: [bob@dom0 ~]$ sudo qubes-dom0-update qubes-repo-contrib Using sys-whonix as UpdateVM to download updates for Dom0; this may take some time... fedora/metalink | 6.4 kB 00:00

[qubes-users] Installing qubes-tunnel on fedora-32-minimal?

2020-12-16 Thread Stumpy
Firstly, I was able to get the user contrib qubes tunnel going on a fedora-32-minmal template and it was great! (great meaning so much easier than the more manual methods; though its still not clear to me if it includes a kill switch) The problem is fed31 has reached EOL so I wanted to

Re: [qubes-users] ftp'ing to a computer on my LAN from an AppVM that is using a VPN proxyVM?

2020-12-16 Thread Stumpy
On 12/12/20 9:17 PM, unman wrote: On Sat, Dec 12, 2020 at 02:47:49PM -0500, Stumpy wrote: On 12/11/20 9:22 AM, unman wrote: On Fri, Dec 11, 2020 at 08:56:20AM -0500, Stumpy wrote: Is there a way to ftp to another computer on my LAN from a appvm that is using a proxyvm? I am able to ftp

Re: [qubes-users] ftp'ing to a computer on my LAN from an AppVM that is using a VPN proxyVM?

2020-12-12 Thread Stumpy
On 12/11/20 9:22 AM, unman wrote: On Fri, Dec 11, 2020 at 08:56:20AM -0500, Stumpy wrote: Is there a way to ftp to another computer on my LAN from a appvm that is using a proxyvm? I am able to ftp to other computers when I set this appvm to just use the default firewall, but sometimes I forget

[qubes-users] ftp'ing to a computer on my LAN from an AppVM that is using a VPN proxyVM?

2020-12-11 Thread Stumpy
Is there a way to ftp to another computer on my LAN from a appvm that is using a proxyvm? I am able to ftp to other computers when I set this appvm to just use the default firewall, but sometimes I forget to set it back to use a vpn vm; but if I have the appvm using the vpn/proxy vm then I am

Re: [qubes-users] Re: Someone should port this RDP Windows windower thing for Qubes

2020-12-01 Thread Stumpy
On 12/1/20 8:47 AM, Alex Smirnoff wrote: It would be an ideal solution for me. And should not be very hard. What rdp client are they based on? On Tuesday, December 1, 2020 at 1:57:50 AM UTC+2 Guerlan wrote: This project: https://github.com/Fmstrat/winapps/

Re: [qubes-users] PCIE gen 4 m.2 cards supported?

2020-11-11 Thread Stumpy
. Sent with ProtonMail Secure Email. ‐‐‐ Original Message ‐‐‐ On Tuesday, November 10, 2020 6:13 PM, Stumpy wrote: Thanks for the response! Regarding not being able to tell the difference, I have an older system (Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz w 32gb mem) with a fairly new

Re: [qubes-users] PCIE gen 4 m.2 cards supported?

2020-11-10 Thread Stumpy
On 11/10/20 5:41 AM, Zrubi wrote: On 11/8/20 4:38 PM, Stumpy wrote: I was listening to the ubuntu podcast and one of the guys there mentioned he just setup his new computer with a PCIE gen4 m.2 card which enabled him to run 4 m.2 drives at the same time, he also squeezed more performance out

Re: [qubes-users] PCIE gen 4 m.2 cards supported?

2020-11-09 Thread Stumpy
On 11/8/20 11:38 AM, Stumpy wrote: I was listening to the ubuntu podcast and one of the guys there mentioned he just setup his new computer with a PCIE gen4 m.2 card which enabled him to run 4 m.2 drives at the same time, he also squeezed more performance out of it by doing raid 0 across the 4

[qubes-users] specifying specific dspvm when opening links/files in another appvm?

2020-11-09 Thread Stumpy
I currently have a desktop file in some of my appvms to open links and files using the default dspvm. How can I specify an alternate, ie not default, dspvm like the whonix dvm, to handle links/files? This is what I currently have: [Desktop Entry] Encoding=UTF-8 Name=BrowserVM

[qubes-users] PCIE gen 4 m.2 cards supported?

2020-11-08 Thread Stumpy
I was listening to the ubuntu podcast and one of the guys there mentioned he just setup his new computer with a PCIE gen4 m.2 card which enabled him to run 4 m.2 drives at the same time, he also squeezed more performance out of it by doing raid 0 across the 4 drives. Asides from the risk of

[qubes-users] how much space is what using?

2020-11-05 Thread Stumpy
I am trying to figure out how to claw back some space on my hard drive but am having a really hard time understanding what is taking up how much space? For example, I have one appvm that in the qubes manager is showing disk usage as 173000MiB sudo Baoab is showing me that / is using: 10.5gb

Re: [qubes-users] Announcement: "Qubes OS contributed packages are now available" by Marek Marczykowski-Górecki

2020-11-04 Thread Stumpy
On 11/4/20 6:50 AM, Frédéric Pierret wrote: Le 11/4/20 à 12:35 PM, Stumpy a écrit : On 11/4/20 6:18 AM, Frédéric Pierret wrote: Le 11/4/20 à 11:39 AM, Stumpy a écrit : On 11/3/20 6:00 PM, Andrew David Wong wrote: On 11/3/20 7:48 AM, Stumpy wrote: On 10/5/20 9:00 PM, Andrew David Wong

Re: [qubes-users] Announcement: "Qubes OS contributed packages are now available" by Marek Marczykowski-Górecki

2020-11-04 Thread Stumpy
On 11/4/20 6:18 AM, Frédéric Pierret wrote: Le 11/4/20 à 11:39 AM, Stumpy a écrit : On 11/3/20 6:00 PM, Andrew David Wong wrote: On 11/3/20 7:48 AM, Stumpy wrote: On 10/5/20 9:00 PM, Andrew David Wong wrote: Dear Qubes Community, Marek has just published the following announcement: https

Re: [qubes-users] Announcement: "Qubes OS contributed packages are now available" by Marek Marczykowski-Górecki

2020-11-04 Thread Stumpy
On 11/3/20 6:00 PM, Andrew David Wong wrote: On 11/3/20 7:48 AM, Stumpy wrote: On 10/5/20 9:00 PM, Andrew David Wong wrote: Dear Qubes Community, Marek has just published the following announcement: https://www.qubes-os.org/news/2020/10/05/qubes-os-contributed-packages/ [...] So do I

Re: [qubes-users] TachyonVpn instead of OpenVPN

2020-11-03 Thread Stumpy
On 10/3/20 7:48 AM, load...@gmail.com wrote: Does anybody tried to test on Linux the Tachyon Vpn (https://tachyon.eco/) in the chain like AppVM Network for Qubes? As I understood this is VPN based on Blockchain technology. -- You received this message because you are subscribed to the

Re: [qubes-users] Announcement: "Qubes OS contributed packages are now available" by Marek Marczykowski-Górecki

2020-11-03 Thread Stumpy
On 10/5/20 9:00 PM, Andrew David Wong wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Dear Qubes Community, Marek has just published the following announcement: https://www.qubes-os.org/news/2020/10/05/qubes-os-contributed-packages/ The plain text of this announcement is reproduced

Re: [qubes-users] Installing Qubes OS contributed packages? (rofi and tunnel packages)

2020-10-19 Thread Stumpy
On 10/17/20 6:17 PM, Jarrah wrote: I just tried to install qubes-tunnel in a fedora template and that also didnt work, sudo dnf install qubes-repo-contrib && sudo dnf install qubes-tunnel Try with `dnf install --refresh --enablerepo=qubes-repo-contrib qubes-tunnel`. It may be that either

Re: [qubes-users] Installing Qubes OS contributed packages? (rofi and tunnel packages)

2020-10-17 Thread Stumpy
On 10/16/20 8:16 AM, Stumpy wrote: Hi, a few questions about the contributed packages. I guess for starters, these shouldnt work in CentOS correct? (I assume this since there was only repo install instructions for fed, deb, and dom0). I had wanted to try out rofi so I installed the repo

[qubes-users] Kill switch on the Qubes OS contributed package tunnel package?

2020-10-16 Thread Stumpy
Chris, Since i think the package was forked from your work I thought I would ask if you knew if the package included a kill switch? I noticed on your qubes github page it mentioned "fail close" which is the same thing? If yes, then i am guessing its safe to assume that the forked qubes package

[qubes-users] Installing Qubes OS contributed packages? (rofi and tunnel packages)

2020-10-16 Thread Stumpy
Hi, a few questions about the contributed packages. I guess for starters, these shouldnt work in CentOS correct? (I assume this since there was only repo install instructions for fed, deb, and dom0). I had wanted to try out rofi so I installed the repo in dom0, seemed to work just fine, but

Re: [qubes-users] Can hardly run anything? every dom0 command results in Errrno2?

2020-10-15 Thread Stumpy
On 10/11/20 5:06 PM, Jarrah wrote: First, thanks to Jarrah! I inadvertantly booted my computer with my defucnt instalation plugged in and it booted my desktop drive on my laptop... go figure, but regardless I was now able to use Jarrah's response to mount and copy over most of the appvms

[qubes-users] Creating a sys-usb for my desktop?

2020-10-14 Thread Stumpy
I have recently had to reinstall qubes and I am at the point for making a sys-usb. I have a desktop and a usb keyboard so I thought I had previously just created one via sudo qubesctl state.sls qvm.sys-usb made it so it would NOT start on boot up and I would manually start it after logging

Re: [qubes-users] Calling all humans! (from Nina)

2020-10-11 Thread Stumpy
On 2020-10-10 07:58, Andrew David Wong wrote: [The following message is from Nina Eleanor Alter, our UX specialist.] Greetings, Qubes community! We are running our first ever survey of current, former, and future Qubes OS users. We invite you all to lend us 10-15min of your time, to

Re: [qubes-users] Can hardly run anything? every dom0 command results in Errrno2?

2020-10-11 Thread Stumpy
On 2020-10-08 10:02, Frank wrote: On 7. Oct 2020, at 20:52, Stumpy stumpy-at-posteo.co wrote: On 2020-10-07 21:13, Stumpy wrote: On 2020-10-06 19:12, Frank wrote: On 6. Oct 2020, at 13:53, Stumpy stumpy-at-posteo.co wrote: On 2020-10-06 10:46, Frank wrote: On 5. Oct 2020, at 16:16, Stumpy

Re: [qubes-users] Can hardly run anything? every dom0 command results in Errrno2?

2020-10-08 Thread Stumpy
On 2020-10-08 02:24, Jarrah wrote: Ok so on the mount from other os page its not totally clear for me. I do have a barebones qubes system on another computer (laptop), so would/should I take my ssd from my desktop connect it (have an adapter cable) to my laptop then "pass" the whole disk to

Re: [qubes-users] Can hardly run anything? every dom0 command results in Errrno2?

2020-10-07 Thread Stumpy
On 2020-10-07 21:13, Stumpy wrote: On 2020-10-06 19:12, Frank wrote: On 6. Oct 2020, at 13:53, Stumpy stumpy-at-posteo.co wrote: On 2020-10-06 10:46, Frank wrote: On 5. Oct 2020, at 16:16, Stumpy stumpy-at-posteo.co wrote: My computer actiing strange like some appvms not opening so i

Re: [qubes-users] Can hardly run anything? every dom0 command results in Errrno2?

2020-10-07 Thread Stumpy
On 2020-10-06 19:12, Frank wrote: On 6. Oct 2020, at 13:53, Stumpy stumpy-at-posteo.co wrote: On 2020-10-06 10:46, Frank wrote: On 5. Oct 2020, at 16:16, Stumpy stumpy-at-posteo.co wrote: My computer actiing strange like some appvms not opening so i decided to restart and restarted normally

Re: [qubes-users] Can hardly run anything? every dom0 command results in Errrno2?

2020-10-06 Thread Stumpy
On 2020-10-06 10:46, Frank wrote: On 5. Oct 2020, at 16:16, Stumpy stumpy-at-posteo.co wrote: My computer actiing strange like some appvms not opening so i decided to restart and restarted normally and booted back up fine except now i can hardly open anything. Appvms will not start, I tried

[qubes-users] Can hardly run anything? every dom0 command results in Errrno2?

2020-10-05 Thread Stumpy
My computer actiing strange like some appvms not opening so i decided to restart and restarted normally and booted back up fine except now i can hardly open anything. Appvms will not start, I tried to do a backup from dom0 term and that gave me an error, tried to run qubes-qube-manager and that

Re: [qubes-users] Any Advantage to using OpenHAB on qubes?

2020-09-30 Thread Stumpy
On 2020-09-30 09:35, Stumpy wrote: Sometimes I have trouble "wrapping my head around" compartmentalization offline use etc so I was hoping someone is doing, or has considered something similar. I would like to setup home automation and security, and OpenHAB seems like the best

[qubes-users] Any Advantage to using OpenHAB on qubes?

2020-09-30 Thread Stumpy
Sometimes I have trouble "wrapping my head around" compartmentalization offline use etc so I was hoping someone is doing, or has considered something similar. I would like to setup home automation and security, and OpenHAB seems like the best way to go. The caveat, for me at least, is I

Re: [qubes-users] Can't start apps from menu/app finder but can from dom0?

2020-09-28 Thread Stumpy
On 2020-09-28 09:15, unman wrote: On Sun, Sep 27, 2020 at 10:54:46PM -0400, Stumpy wrote: On 2020-09-27 21:42, Stumpy wrote: On 2020-09-27 19:59, Stumpy wrote: The subject says most of it. I can start apps from a dom0 terminal with qvm-run but cant figure why I cant do it via the xfce menu

Re: [qubes-users] Can't start apps from menu/app finder but can from dom0?

2020-09-27 Thread Stumpy
On 2020-09-27 21:42, Stumpy wrote: On 2020-09-27 19:59, Stumpy wrote: The subject says most of it. I can start apps from a dom0 terminal with qvm-run but cant figure why I cant do it via the xfce menu or app finder. I tried running using qvm-sync-appmenus appvm but that didnt help. Thoughts

Re: [qubes-users] Can't start apps from menu/app finder but can from dom0?

2020-09-27 Thread Stumpy
On 2020-09-27 19:59, Stumpy wrote: The subject says most of it. I can start apps from a dom0 terminal with qvm-run but cant figure why I cant do it via the xfce menu or app finder. I tried running using qvm-sync-appmenus appvm but that didnt help. Thoughts? The last two times (just tried

[qubes-users] Can't start apps from menu/app finder but can from dom0?

2020-09-27 Thread Stumpy
The subject says most of it. I can start apps from a dom0 terminal with qvm-run but cant figure why I cant do it via the xfce menu or app finder. I tried running using qvm-sync-appmenus appvm but that didnt help. Thoughts? -- You received this message because you are subscribed to the Google

Re: [qubes-users] Any reason I shouldn't be able to use an internal sound card?

2020-09-26 Thread Stumpy
On 2020-09-26 01:54, Jarrah wrote: Is there any reason i shouldn't be able to (fairly easily) use an internal sound card with Qubes? If not, any recommendations on sounds cards that work well with Qubes? Thx! Or USB as well, actually would one necessarily work/be more compatible than the

Re: [qubes-users] Any reason I shouldn't be able to use an internal sound card?

2020-09-25 Thread Stumpy
On 2020-09-25 16:40, Stumpy wrote: Is there any reason i shouldn't be able to (fairly easily) use an internal sound card with Qubes? If not, any recommendations on sounds cards that work well with Qubes? Thx! Or USB as well, actually would one necessarily work/be more compatible than

[qubes-users] Any reason I shouldn't be able to use an internal sound card?

2020-09-25 Thread Stumpy
Is there any reason i shouldn't be able to (fairly easily) use an internal sound card with Qubes? If not, any recommendations on sounds cards that work well with Qubes? Thx! -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from

Re: [qubes-users] Witch one is the best?

2020-09-21 Thread Stumpy
On 2020-09-21 08:50, Chris Laprise wrote: On 9/21/20 8:17 AM, Stumpy wrote: On 2020-09-20 14:24, Chris Laprise wrote: On 9/20/20 2:08 PM, Chris Laprise wrote: On 9/19/20 11:16 PM, Jarrah wrote: My question is, would some of the newer/faster AMD CPUs and chipsets work with Qubes? I can

Re: [qubes-users] Witch one is the best?

2020-09-21 Thread Stumpy
On 2020-09-20 14:24, Chris Laprise wrote: On 9/20/20 2:08 PM, Chris Laprise wrote: On 9/19/20 11:16 PM, Jarrah wrote: My question is, would some of the newer/faster AMD CPUs and chipsets work with Qubes? I can speak for the 2000 series working. I believe some people have working 3000

Re: [qubes-users] Witch one is the best?

2020-09-20 Thread Stumpy
On 2020-09-19 23:16, Jarrah wrote: My question is, would some of the newer/faster AMD CPUs and chipsets work with Qubes? I can speak for the 2000 series working. I believe some people have working 3000 series, but 4000 has been a serious issue. Not sure if that's the CPU or the specific

Re: [qubes-users] Witch one is the best?

2020-09-19 Thread Stumpy
On 2020-08-23 11:21, 'awokd' via qubes-users wrote: Mélissa Ch.: Silitech Intel(R) Core(TM) i5-3450 CPU @ 3.10 GHz 3.10GHz Mémoire 16.0 Go ram Système d’exploitation 64 bits Windows 7 Familiale Premium Carte graphique ADM Radeon HD 7470 This one is the better Qubes candidate

Re: [qubes-users] Hardening Guide for Paranoid Noobs?

2020-09-07 Thread Stumpy
On 2020-09-05 13:35, 'awokd' via qubes-users wrote: Stumpy: I was reminded about qubes hardening that Chris L has been working on and also noticed that Patrick/Whonix is now basing whonix on thier kicksecure distro and was trying (not so successfully) to absorb all of this. I got the impression

[qubes-users] Hardening Guide for Paranoid Noobs?

2020-09-05 Thread Stumpy
I was reminded about qubes hardening that Chris L has been working on and also noticed that Patrick/Whonix is now basing whonix on thier kicksecure distro and was trying (not so successfully) to absorb all of this. I got the impression that Chris's work wouldnt jive so well with kicksecure

[qubes-users] PulseEffects?

2020-08-24 Thread Stumpy
I wanted to install PulseEffects on dom0 but it seems its not available? (I thought it would be available as it comes with Fed workstation by default i think?). How inadvisable is it to install it and how would i got about doing that? Would I have to add another repo? -- You received this

Re: [qubes-users] GPT or MBR?

2020-08-06 Thread Stumpy
On 2020-08-05 21:13, unman wrote: On Wed, Aug 05, 2020 at 09:04:41PM +0200, Qubes wrote: On 8/5/20 8:31 PM, Stumpy wrote: On 2020-08-05 12:06, Stumpy wrote: I have win installed on a drive with mbr, should I be able make a vhd and convert that to a RAW and run it as a template in Qubes? If i

Re: [qubes-users] GPT or MBR?

2020-08-05 Thread Stumpy
On 2020-08-05 12:06, Stumpy wrote: I have win installed on a drive with mbr, should I be able make a vhd and convert that to a RAW and run it as a template in Qubes? If i remember correctly gpt does not play well with qubes? I guess more to the point, "MBR is better" or &quo

[qubes-users] GPT or MBR?

2020-08-05 Thread Stumpy
I have win installed on a drive with mbr, should I be able make a vhd and convert that to a RAW and run it as a template in Qubes? If i remember correctly gpt does not play well with qubes? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To

[qubes-users] Error for one AppVM showed up in a separate AppVM?

2020-07-23 Thread Stumpy
I wasnt sure if this was a bug or what but it seemed odd to me that the error from one appvm showed up in a different appvm? The in the destination appvm I have ondrive v2.4.2 running. In the appvm where the error popped up I was trying to move a file, via qvm-move to the destination appvm

[qubes-users] A way to "write configurations" to SALT?

2020-07-21 Thread Stumpy
I have been trying to figure out SALT in my spare time and every time I start I finish with watery eyes and a mushy brain... for me its hard to wrap my head around. While I am not giving up per se it occurred to me, so i just thought id ask on the off chance its possible... Can one say setup

Re: [qubes-users] Re: Fedora 30 approaching EOL, Fedora 31 TemplateVM available, Fedora 32 TemplateVM in testing

2020-06-29 Thread Stumpy
On 2020-06-28 14:40, Lorenzo Lamas wrote: I noticed that the Fedora 32 template is in the stable repo, but no announcement yet. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it,

[qubes-users] repo update error?

2020-06-28 Thread Stumpy
On the fed31 template, when i try to run update i get the following error, not sure if i should be changing something? Errors during downloading metadata for repository 'updates': - Curl error (6): Couldn't resolve host name for

[qubes-users] Adding (unofficial) Qubes Matrix Rooms to the support page?

2020-05-24 Thread Stumpy
I'm not asking for this room to be "official" but perhaps it could be listed as a resource on the Qubes site? There are two rooms currently, one which is strictly moderated and another one that is a bit more flexible but both very much centered around Qubes and Qubes support. I realize there

Re: [qubes-users] running programs as room in sys-usb?

2020-05-18 Thread Stumpy
On 2020-05-18 08:52, Mike Keehan wrote: On 5/18/20 1:43 PM, Stumpy wrote: I have sys-usb based on fedora minimal and when i try to run something like qvm-run -u root sys-usb xterm from dom0 it just hangs (the command, not the whole computer) until i ctrl+c out. Is there some reason i

Re: [qubes-users] Installing ulauncher in dom0?

2020-05-18 Thread Stumpy
On 2020-05-13 09:33, Stumpy wrote: I keep running up against limitations of xfce's application launcher and wanted to ask about the security implications of installing something like ulauncher? My threat model is less about being directly targeted and more about general secuirty against

[qubes-users] running programs as room in sys-usb?

2020-05-18 Thread Stumpy
I have sys-usb based on fedora minimal and when i try to run something like qvm-run -u root sys-usb xterm from dom0 it just hangs (the command, not the whole computer) until i ctrl+c out. Is there some reason i shouldnt be able to do this? -- You received this message because you are

Re: [qubes-users] HCL search facility

2020-05-16 Thread Stumpy
On 2020-05-15 09:26, Andrew Sullivan wrote: On Friday, 15 May 2020 14:13:18 UTC+1, unman wrote: On Thu, May 14, 2020 at 12:30:11PM -0700, Andrew Sullivan wrote: > Good evening > > Is there a way to search the HCL? If not, could such a function be provided? The list is

[qubes-users] Installing ulauncher in dom0?

2020-05-13 Thread Stumpy
I keep running up against limitations of xfce's application launcher and wanted to ask about the security implications of installing something like ulauncher? My threat model is less about being directly targeted and more about general secuirty against malware, privacy, and perhaps soft

Re: [qubes-users] What's your flow for new templateVM?

2020-05-11 Thread Stumpy
On 2020-05-11 10:26, 'Ryan Tate' via qubes-users wrote: Saw the new f31 templateVM (thanks for that) and just curious how folks generally migrate to a new templateVM. I manually maintain this big text list of packages and just use that to manually update the fresh templateVM to what I need.

Re: [qubes-users] Re: Consider making tax deductable donations possible in the EU

2020-05-11 Thread Stumpy
On 2020-05-10 16:25, Michael Carbone wrote: On 5/9/20 2:17 PM, Lorenzo Lamas wrote: Whonix Project has partnered up with the CCT (Center for the Cultivation of Technology, which is a charitable non-profit host organization in Germany for international Free Software projects.) This makes it

Re: [qubes-users] Setup firefox to open certain files in dspvms?

2020-05-07 Thread Stumpy
On 2020-05-07 07:56, Stumpy wrote: On 2020-04-20 20:07, Sven Semmler wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Hi Stumpy, not quite sure what you are asking. Your subject implies you want to configure Firefox to open certain links/files in a DVM. To acomplish that you want to get

Re: [qubes-users] Setup firefox to open certain files in dspvms?

2020-05-07 Thread Stumpy
On 2020-04-20 20:07, Sven Semmler wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Hi Stumpy, not quite sure what you are asking. Your subject implies you want to configure Firefox to open certain links/files in a DVM. To acomplish that you want to get Rafaelle Florio's Qubes URL

[qubes-users] Setup firefox to open certain files in dspvms?

2020-04-20 Thread Stumpy
I made a desktop file and put it in my .local/share/applications directory but it does not seem to be working? [Desktop Entry] Encoding=UTF-8 Name=WriterVM Exec=qvm-open-in-dvm %u Terminal=false X-MultipleArgs=false Type=Application Categories=Network;WebBrowser;

Re: [qubes-users] can't open anything in standalone vm ?

2020-04-14 Thread Stumpy
On 2020-04-13 19:30, 'awokd' via qubes-users wrote: Stumpy: oops. only relied to awokd (sorry). repost: Thanks, gave it a try and either i am misunderstanding the command or something else? [sam@dom0 ~]$ sudo xl console miffed miffed is an invalid domain identifier (rc=-6) No problem; did

Re: [qubes-users] can't open anything in standalone vm ?

2020-04-12 Thread Stumpy
On 2020-04-10 16:49, 'awokd' via qubes-users wrote: Stumpy: I recently made a fedora 30 based standalone VM so i wouldnt have to goop up my templates with some employer-required programs. It was working fine for a day or two but earlier today I sat down and wasnt able to start any programs up

[qubes-users] can't open anything in standalone vm ?

2020-04-09 Thread Stumpy
I recently made a fedora 30 based standalone VM so i wouldnt have to goop up my templates with some employer-required programs. It was working fine for a day or two but earlier today I sat down and wasnt able to start any programs up in this standalown vm? I hhave tried from the appfinder menu

Re: [qubes-users] Building a new pc for running Qubes OS

2020-04-09 Thread Stumpy
On 2020-04-09 05:11, Mark Fernandes wrote:  .. I am looking for a bit of a work horse (not nessisarily bleeding edge) ... ...  getting something that is highly likely to play nice with Qubes is pretty much at the top of my priority list. Not sure what kind of

Re: [qubes-users] Building a new pc for running Qubes OS

2020-04-08 Thread Stumpy
On 2020-04-08 13:30, 'awokd' via qubes-users wrote: Mark Fernandes: But surely it would be better just to buy it brand new in a shrink-wrapped condition over the counter at a physical store, where you randomly select the hardware from many alternatives? In the UK, we have a store called PC

Re: [qubes-users] Building a new pc for running Qubes OS

2020-04-08 Thread Stumpy
On 2020-03-31 14:37, Stumpy wrote: On 2019-11-01 14:57, M wrote: I’m thinking about building a new pc for running Qubes OS with the following specifications: 1)  Motherboard:  ASRock X570 Pro4 2)  CPU:  AMD Ryzen 3 3200G with onboard graphic (until they release one for PCIe 4.0 with onboard

Re: [qubes-users] No Match for argument qubes-template-whonix-ws-15-4.0.1-201910102356.noarch ?

2020-04-01 Thread Stumpy
On 2020-04-01 11:22, Frank wrote: On Wed, Apr 01, 2020 at 07:38:33AM -0400, Stumpy wrote: On 2020-03-30 15:26, Chris Laprise wrote: On 3/27/20 7:38 PM, Stumpy wrote: Complete! [nate@dom0 ~]$ sudo qubes-dom0-update --enablerepo=qubes-templates-community \ qubes-template-whonix-ws Using sys

  1   2   3   >