Re: [qubes-users] HVM Creation - immediate shutdown after boot

2018-11-30 Thread pieter lems
On Fri, Nov 30, 2018, 1:58 AM unman  wrote:

> On Thu, Nov 29, 2018 at 09:35:58PM +0100, pieter lems wrote:
> > Hello max,
> > I think i know the answer to both questions but if there is something
> wrong
> > please correct me. (to the people that know a lot about qubes)
> > Regarding your first question. The download did indeed fail  because
> there
> > was not enough disk space on your qube. I've had the same problem
> multiple
> > times but increasing the available disk space should solve the problem.
> > This can be done by increasing the private storage size in the qubes
> > settings manager.
> > As far as i know is the /rw folder the folder which is persistent after a
> > restart of the qube. The rw folder contains configuration files
> concerning
> > the specific qube. Did you maybe point the iso download to the rw folder?
> > this could be the reason why its 100% full.
> >
> > Regarding your second question, Ive had the same problem while
> installing a
> > kali iso. Increasing the max memory to 8GB solved the problem for me.
> This
> > can be done under the advanced tab in the qubes settings manager.
> > I hope some of this info can help you out.
> > Goodluck!
> >
> > Op do 29 nov. 2018 om 21:19 schreef :
> >
> > > Next in my qubes learning is the creation of a HVM.  I noticed a couple
> > > things through the process and wanted to get comments on some of the
> > > hang-ups.
> > >
> > > First step was to download an .iso into one of my AppVMs.  During this
> > > process, the  AppVMs were failing downloads after a couple of minutes.
> I
> > > suspected it was because that they were filling up their disk space,
> even
> > > with no other files on the AppVM.
> > >
> > > After running a 'df -h' I noticed that the "rw" drive was at 100% (is
> this
> > > something Qubes specific?), even after expanding the AppVMs through
> Qubes
> > > Manager.
> > >
> > > 1.  What might be causing this?  What is the "rw" drive?
> > >
> > > I circumvented this holdup by creating a new AppVM with enough space to
> > > download the .iso.  After creating the StandadloneVM and pointing its
> boot
> > > 'cdrom' to the .iso file in the AppVM mentioned above, the opening
> screen
> > > of the OS appears and is interactive.  However, after choosing to boot
> the
> > > OS, the screen quickly closes and the StandaloneVM shuts down.
> > >
> > > 2.  What do you suspect causes this?  The StandaloneVM has been
> allocated
> > > 15GB of space and left the default 4GB RAM.
> > >
> > >
> > > System: Base Qubes 4.0 installation, Fedora 28 template, Thinkpad T480
> > > w/32Gb RAM.
> > >
> > > Expected results: StandaloneVM boots into basic OS configuration wizard
> > > for the .iso and installation can proceed.
> > >
> > > Thanks again for any help in advance!
> > >
> > > - Max
> > >
>
> Pieter - can you remember not to top post please?
>
> You're partly right about /rw - it contains configuration, /usr/local
> and /home.
> That's why the download ran out of space because /rw is created by
> default at 2G. You can change this under settings. /home/user is stored
> there so Downloads can rapidly fill that space.
>
> As to booting StandaloneVM, 4GB should be fine, depending on the OS -
> certainly enough for kali.
> Also worth checking that you have kernel set to '', (and maybe virt_mode
> hvm)
>
> unman
>
> Hi , im sorry im kinda new to this google-groups feature.
>
About the initial question. Iknow 4gb should be enough but it only
worked after setting the max value to 8GB.

> --
> You received this message because you are subscribed to the Google Groups
> "qubes-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to qubes-users+unsubscr...@googlegroups.com.
> To post to this group, send email to qubes-users@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/20181130005824.bfm35u4ue6b4adhk%40thirdeyesecurity.org
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnV0-_FCsungKn7ew%2BuMFuE8x3m1usRC01t0zjiNXbk%3DUw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] HVM Creation - immediate shutdown after boot

2018-11-29 Thread pieter lems
Hello max,
I think i know the answer to both questions but if there is something wrong
please correct me. (to the people that know a lot about qubes)
Regarding your first question. The download did indeed fail  because there
was not enough disk space on your qube. I've had the same problem multiple
times but increasing the available disk space should solve the problem.
This can be done by increasing the private storage size in the qubes
settings manager.
As far as i know is the /rw folder the folder which is persistent after a
restart of the qube. The rw folder contains configuration files concerning
the specific qube. Did you maybe point the iso download to the rw folder?
this could be the reason why its 100% full.

Regarding your second question, Ive had the same problem while installing a
kali iso. Increasing the max memory to 8GB solved the problem for me. This
can be done under the advanced tab in the qubes settings manager.
I hope some of this info can help you out.
Goodluck!

Op do 29 nov. 2018 om 21:19 schreef :

> Next in my qubes learning is the creation of a HVM.  I noticed a couple
> things through the process and wanted to get comments on some of the
> hang-ups.
>
> First step was to download an .iso into one of my AppVMs.  During this
> process, the  AppVMs were failing downloads after a couple of minutes. I
> suspected it was because that they were filling up their disk space, even
> with no other files on the AppVM.
>
> After running a 'df -h' I noticed that the "rw" drive was at 100% (is this
> something Qubes specific?), even after expanding the AppVMs through Qubes
> Manager.
>
> 1.  What might be causing this?  What is the "rw" drive?
>
> I circumvented this holdup by creating a new AppVM with enough space to
> download the .iso.  After creating the StandadloneVM and pointing its boot
> 'cdrom' to the .iso file in the AppVM mentioned above, the opening screen
> of the OS appears and is interactive.  However, after choosing to boot the
> OS, the screen quickly closes and the StandaloneVM shuts down.
>
> 2.  What do you suspect causes this?  The StandaloneVM has been allocated
> 15GB of space and left the default 4GB RAM.
>
>
> System: Base Qubes 4.0 installation, Fedora 28 template, Thinkpad T480
> w/32Gb RAM.
>
> Expected results: StandaloneVM boots into basic OS configuration wizard
> for the .iso and installation can proceed.
>
> Thanks again for any help in advance!
>
> - Max
>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "qubes-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to qubes-users+unsubscr...@googlegroups.com.
> To post to this group, send email to qubes-users@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/4dbe1307-b47b-4314-bcd7-c5d044a2a9e2%40googlegroups.com
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnWQPXBYRt8AfGQZkUqWYFghMizgy%3D0uN74ja2WgDwEqHQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Anyone bought a Dell laptop recently that works with V4

2018-11-29 Thread pieter lems
Hi Chris,
Yes ive been used V4 for a long time and I literally had 0 problems while
using it as daily driver. I switched to 4.0.1 and the only problem i had as
of now was backing up qubes but this was code related and has been fixed
already. :)
Cheers!

On Thu, Nov 29, 2018, 6:03 PM Chris  wrote:

> Hello Pieter,
>
> ‐‐‐ Original Message ‐‐‐
> On Thursday, 29 November 2018 16:19, pieter lems 
> wrote:
>
> Hello chris I switched from a dell xps 15 to a hp spectre x360 not long
> ago and I must say i prefer the Hp spectre. I know it's not an answer to
> your question and im sory for that but i thought i should mention it
> because it's about the same price and has the same / better specs. Ive got
> the model with an i7 8th gen 16gb ram and 500gb ssd. The only "problem" ive
> encounterd is the laptop fan spinning up when ideling but thats because the
> laptop is very thin and light. If i were you i would look into this laptop.
> Cheers!
>
>
> Thanks for this - looks very good. Does Qubes work well on it?
>
> Regards,
>
> Chris
>
> -
> Chris Willard
> ch...@meliser.co.uk
>
> Sent with ProtonMail <https://protonmail.com> Secure Email.
>
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnVeHKZ1H3HDYnTAR9HCiZqveCmktT3AJ-MJaWaegOZxow%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Anyone bought a Dell laptop recently that works with V4

2018-11-29 Thread pieter lems
Hello chris I switched from a dell xps 15 to a hp spectre x360 not long ago
and I must say i prefer the Hp spectre. I know it's not an answer to your
question and im sory for that but i thought i should mention it because
it's about the same price and has the same / better specs. Ive got the
model with an i7 8th gen 16gb ram and 500gb ssd. The only "problem" ive
encounterd is the laptop fan spinning up when ideling but thats because the
laptop is very thin and light. If i were you i would look into this laptop.
Cheers!

On Thu, Nov 29, 2018, 3:16 PM Chris  wrote:

> Hello All,
>
> Work said they will get me a new laptop and I would like to run Qubes V4
> on it. Can anyone recommend a current model? I'd like an i7 with lots of
> memory!
>
> I had a look at the HCL but the models don't appear to be on the Dell site
> to buy.
>
> Many thanks for any help.
>
> Regards,
>
> Chris
>
>
> -
> Chris Willard
> ch...@meliser.co.uk
> Sent with ProtonMail  Secure Email.
>
> --
> You received this message because you are subscribed to the Google Groups
> "qubes-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to qubes-users+unsubscr...@googlegroups.com.
> To post to this group, send email to qubes-users@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/zliqe-rVpNZeX8fafuI7ZH0GAAgLHUiXgd4AVF3-3KU_T5iWI8pQbFro89O_gcBbsSEtIE7Vj4uqR0K583F9_ckSJbry6gigaOyffWK4Q4Q%3D%40meliser.co.uk
> 
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnUOayK9LYjDsFuEFD9V6YHY2ZBkLbv9p1i3yqCuZxVhQA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Keeping your QubesOS clean

2018-11-26 Thread pieter lems
Hello everyone,
I was wondering what the best way is to keep your Qubes system clean.
Currently I'm running bleachbit on each different qube weekly. This seems
kind of inconvenient tho. Is there someone that has a better way of doing
this?
Thanks in advance!

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnXceMBJrc7m5Xc-xv%3DpJhgN%3DHRdV407H6Dw%3DERB2G%2BMiw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] alternative to bloated templates for faster work and minimal boot time/resources used

2018-11-26 Thread pieter lems
Hello Chris,
I was wondering, if i run a qube based on a fedora template it uses about
3.5GB of memory when just browsing. I decreased it to 2500 and it works
exactly the same. Will there be any negative effects by decreasing the
memory manually?
Thanks for the info btw!

Op vr 16 nov. 2018 om 03:27 schreef Chris Laprise :

> On 11/15/2018 12:29 PM, 799 wrote:
> > Hello,
> >
> > Am Do., 15. Nov. 2018, 09:44 hat  > > geschrieben:
> >
> > Is it possible to transfer sys-net/sys-usb/sys-vpn/sys-whonix to
> > 100mb templates based on musl/busybox/sysvinit linux ?
> > (...)
> >
> >
> > my sys-vms are based on fedora-28-minimal templates.
> > Honestly I like the idea and think smaller is better, but as I am
> > running lots ~8-12 AppVMs when working productively most ressources are
> > used by those VMs.
> >
> > I don't think that you gain that much ressources by switching sys-vms.
> > And honestly storage capacity is not a big deal today ;-)
>
> Disk capacity shouldn't be a big issue unless you like to make lots of
> template variations.
>
> For RAM efficiency the available templates are already pretty efficient,
> but the Qubes RAM allocation algorithms could be better. Manually
> setting the maximum RAM has worked great on my 8GB system: about 350MB
> for each service VM, 700-900MB for media playback, 1500-2500MB for
> browsing and other heavy apps. Finally, I set the dom0 max to 1500MB in
> /etc/default/grub. Using debian-9 templates, these ranges result in a
> system that is *much* more usable than it would be with the default RAM
> allocation; I highly recommend it.
>
>
>
> --
>
> Chris Laprise, tas...@posteo.net
> https://github.com/tasket
> https://twitter.com/ttaskett
> PGP: BEE2 20C5 356E 764A 73EB  4AB3 1DC4 D106 F07F 1886
>
> --
> You received this message because you are subscribed to the Google Groups
> "qubes-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to qubes-users+unsubscr...@googlegroups.com.
> To post to this group, send email to qubes-users@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/d272fbef-32ad-5db6-1a7a-9ad012f8e072%40posteo.net
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnV1eEMLpGfRrOyzcHjKyDXrdM5TSTBeojc6CibWzqfTfw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] How can I remove the GUI when booting qubes

2018-11-21 Thread pieter lems
Okay so i found the file i was looking in dom0. There no rghb quiet located
in the file :(

On Tue, Nov 20, 2018, 11:51 PM 799  wrote:

> Hello Pieter,
>
> Am Di., 20. Nov. 2018, 20:20 hat pieter lems 
> geschrieben:
>
>> [...]
>> I was wondering how i can make it so that when qubes is starting i see
>> the boot information (the output of the boot progress,im not sure how i
>> should call it). I know that when u press a key it shows the output but i
>> would like that it always shows. [...]
>>
>
> You can change the default behaviour of the Boot loader:
>
> nano /etc/default/grub
>
> [...]
> GRUB_TERMINAL_OUTPUT="console"
> [...]
> Edit the line which has: GRUB_CMDLINE_LINUX=[...] rhgb quiet"
> remove rhgb quiet.
>
> After this you need to write the new configuration to the Boot partition
> with:
>
> sudo grub2-mkconfig -o /boot/grub2/grub.cfg
>
> This will show the default messages when booting up.
>
> - O
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnX8O59BWkJja%2B6FWpLZCAOiEVELirreSMOarzM5bnJtnA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] How can I remove the GUI when booting qubes

2018-11-21 Thread pieter lems
Okay i was to quick saying it work since a relative of mine got it to work.
He's not responding as of now so im going to ask it here. i dont have a
grub file in /etc/default/ should it be there tho?
Cheers!

On Thu, Nov 22, 2018, 12:56 AM pieter lems  wrote:

> Awesome, thanks for the response. This worked!
> Thanks again!
>
> On Tue, Nov 20, 2018, 11:51 PM 799  wrote:
>
>> Hello Pieter,
>>
>> Am Di., 20. Nov. 2018, 20:20 hat pieter lems 
>> geschrieben:
>>
>>> [...]
>>> I was wondering how i can make it so that when qubes is starting i see
>>> the boot information (the output of the boot progress,im not sure how i
>>> should call it). I know that when u press a key it shows the output but i
>>> would like that it always shows. [...]
>>>
>>
>> You can change the default behaviour of the Boot loader:
>>
>> nano /etc/default/grub
>>
>> [...]
>> GRUB_TERMINAL_OUTPUT="console"
>> [...]
>> Edit the line which has: GRUB_CMDLINE_LINUX=[...] rhgb quiet"
>> remove rhgb quiet.
>>
>> After this you need to write the new configuration to the Boot partition
>> with:
>>
>> sudo grub2-mkconfig -o /boot/grub2/grub.cfg
>>
>> This will show the default messages when booting up.
>>
>> - O
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnWJDftUsNvXmVLb8Cs%3Dz7zz9WLZg5hS3vaiJ430SwFu4Q%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] How can I remove the GUI when booting qubes

2018-11-21 Thread pieter lems
Awesome, thanks for the response. This worked!
Thanks again!

On Tue, Nov 20, 2018, 11:51 PM 799  wrote:

> Hello Pieter,
>
> Am Di., 20. Nov. 2018, 20:20 hat pieter lems 
> geschrieben:
>
>> [...]
>> I was wondering how i can make it so that when qubes is starting i see
>> the boot information (the output of the boot progress,im not sure how i
>> should call it). I know that when u press a key it shows the output but i
>> would like that it always shows. [...]
>>
>
> You can change the default behaviour of the Boot loader:
>
> nano /etc/default/grub
>
> [...]
> GRUB_TERMINAL_OUTPUT="console"
> [...]
> Edit the line which has: GRUB_CMDLINE_LINUX=[...] rhgb quiet"
> remove rhgb quiet.
>
> After this you need to write the new configuration to the Boot partition
> with:
>
> sudo grub2-mkconfig -o /boot/grub2/grub.cfg
>
> This will show the default messages when booting up.
>
> - O
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnWb9cOjGLY2iWPt5X8ZqhhTF5O%2BWQhC9HYgrtfAsQLDSg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] How can I remove the GUI when booting qubes

2018-11-20 Thread pieter lems
It doesn't seem to work unfortunately, it does display more information
tho.

Op di 20 nov. 2018 om 19:32 schreef donoban :

> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA256
>
> On 11/20/18 8:19 PM, pieter lems wrote:
> > Hello everyone, First of all i would like to start of thanking the
> > Qubes developers. I've been using QubesOS for around a month right
> > now and i cannot wish for more. It's insane how much work you've
> > put into the development of the OS and that you've come so far.
> >
> > I was wondering how i can make it so that when qubes is starting i
> > see the boot information (the output of the boot progress,im not
> > sure how i should call it). I know that when u press a key it shows
> > the output but i would like that it always shows. No offence to the
> > GUI tho!
> >
>
> I think that removing 'quiet' in /boot/efi/EFI/qubes/xen.cfg should
> work but maybe you can modify other thing for do not lost the change
> when upgrading dom0.
> -BEGIN PGP SIGNATURE-
>
> iQIzBAEBCAAdFiEEznLCgPSfWTT+LPrmFBMQ2OPtCKUFAlv0YUgACgkQFBMQ2OPt
> CKUyeQ//aH/6q5xpg4Xuu5zXa4sIBDazXLPND7yl25sEha/RW2VwYDUfrfAijcN3
> VU+DzVeH2nTByePXXAvz7XNShhYYFnTYo4lEp6GmrHQPaUV7KpGtjT2Egn9k97cA
> oyQ90ZowPn0XK7owje8Vi4vV6ZhmVzFi9wlLzX40Dv0grrxOxV5AlrhBavpq+HfJ
> Zz8O6k+bmPGqIWP2udBWULFN8+twSOGMCQgAI3mvAWZC/AfMevlooAkcFviawsk3
> IpVzRktrriVrNPT1LfJzvhRZVNNq4d9BaFKDPSGO1t9Nts5Srs7MzEBoR1LWVHHG
> YoLE6PyE0beUfvHKtyII2M37FSDO+aseQmHk4iPSqg0/TW7P8t5LUZSM/JObSJw2
> /YJMfWy7qC/zbDuTkezEE+7rwR1BZp8w9H7Sotm3on4Xzs3B9WXA9VVZfiiiBFt5
> f7CTnV0mfMoPiOAX7GqVcc/5YlXD7OSh9Ei0MvHYPAWX3eE23ScY309/T2zqBlD9
> DEGQdJ6179roGAWI/HLoy7/BF8iz1o4ahAL0h1s2PkMinYjYfLnvsFDL4aNj/pi0
> itKaf+TNQr9JSqpLEWpjWY4w6V2WmqRSmX424cP4TJX6gUuVsWxrPFn8R7uC/aZW
> KC9uEbM/qOTJuc+ieNYL2hbC7IlV2CyLghKLMyaxrR92Q5SnIG0=
> =gHiN
> -END PGP SIGNATURE-
>
> --
> You received this message because you are subscribed to the Google Groups
> "qubes-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to qubes-users+unsubscr...@googlegroups.com.
> To post to this group, send email to qubes-users@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/17835bd5-6058-8f77-ba38-312f519a3082%40riseup.net
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnVEjk0qryoggbn%2BmeFhzmUp4u0i%3DCMw1ajLTLhaxU2hkA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] How can I remove the GUI when booting qubes

2018-11-20 Thread pieter lems
Do you happen to know the reason why i cant cd into the efi directory?
adding sudo does'nt work it stays in the boot directory. :)

Op di 20 nov. 2018 om 19:32 schreef donoban :

> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA256
>
> On 11/20/18 8:19 PM, pieter lems wrote:
> > Hello everyone, First of all i would like to start of thanking the
> > Qubes developers. I've been using QubesOS for around a month right
> > now and i cannot wish for more. It's insane how much work you've
> > put into the development of the OS and that you've come so far.
> >
> > I was wondering how i can make it so that when qubes is starting i
> > see the boot information (the output of the boot progress,im not
> > sure how i should call it). I know that when u press a key it shows
> > the output but i would like that it always shows. No offence to the
> > GUI tho!
> >
>
> I think that removing 'quiet' in /boot/efi/EFI/qubes/xen.cfg should
> work but maybe you can modify other thing for do not lost the change
> when upgrading dom0.
> -BEGIN PGP SIGNATURE-
>
> iQIzBAEBCAAdFiEEznLCgPSfWTT+LPrmFBMQ2OPtCKUFAlv0YUgACgkQFBMQ2OPt
> CKUyeQ//aH/6q5xpg4Xuu5zXa4sIBDazXLPND7yl25sEha/RW2VwYDUfrfAijcN3
> VU+DzVeH2nTByePXXAvz7XNShhYYFnTYo4lEp6GmrHQPaUV7KpGtjT2Egn9k97cA
> oyQ90ZowPn0XK7owje8Vi4vV6ZhmVzFi9wlLzX40Dv0grrxOxV5AlrhBavpq+HfJ
> Zz8O6k+bmPGqIWP2udBWULFN8+twSOGMCQgAI3mvAWZC/AfMevlooAkcFviawsk3
> IpVzRktrriVrNPT1LfJzvhRZVNNq4d9BaFKDPSGO1t9Nts5Srs7MzEBoR1LWVHHG
> YoLE6PyE0beUfvHKtyII2M37FSDO+aseQmHk4iPSqg0/TW7P8t5LUZSM/JObSJw2
> /YJMfWy7qC/zbDuTkezEE+7rwR1BZp8w9H7Sotm3on4Xzs3B9WXA9VVZfiiiBFt5
> f7CTnV0mfMoPiOAX7GqVcc/5YlXD7OSh9Ei0MvHYPAWX3eE23ScY309/T2zqBlD9
> DEGQdJ6179roGAWI/HLoy7/BF8iz1o4ahAL0h1s2PkMinYjYfLnvsFDL4aNj/pi0
> itKaf+TNQr9JSqpLEWpjWY4w6V2WmqRSmX424cP4TJX6gUuVsWxrPFn8R7uC/aZW
> KC9uEbM/qOTJuc+ieNYL2hbC7IlV2CyLghKLMyaxrR92Q5SnIG0=
> =gHiN
> -END PGP SIGNATURE-
>
> --
> You received this message because you are subscribed to the Google Groups
> "qubes-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to qubes-users+unsubscr...@googlegroups.com.
> To post to this group, send email to qubes-users@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/17835bd5-6058-8f77-ba38-312f519a3082%40riseup.net
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnViJqeyPaiOOEafFggo0nCjF_mL3YAQ65VemVNnS5%2BRXA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] How can I remove the GUI when booting qubes

2018-11-20 Thread pieter lems
thanks for the quick responce.
I'll try it now and get back with the results!
cheers!

Op di 20 nov. 2018 om 19:32 schreef donoban :

> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA256
>
> On 11/20/18 8:19 PM, pieter lems wrote:
> > Hello everyone, First of all i would like to start of thanking the
> > Qubes developers. I've been using QubesOS for around a month right
> > now and i cannot wish for more. It's insane how much work you've
> > put into the development of the OS and that you've come so far.
> >
> > I was wondering how i can make it so that when qubes is starting i
> > see the boot information (the output of the boot progress,im not
> > sure how i should call it). I know that when u press a key it shows
> > the output but i would like that it always shows. No offence to the
> > GUI tho!
> >
>
> I think that removing 'quiet' in /boot/efi/EFI/qubes/xen.cfg should
> work but maybe you can modify other thing for do not lost the change
> when upgrading dom0.
> -BEGIN PGP SIGNATURE-
>
> iQIzBAEBCAAdFiEEznLCgPSfWTT+LPrmFBMQ2OPtCKUFAlv0YUgACgkQFBMQ2OPt
> CKUyeQ//aH/6q5xpg4Xuu5zXa4sIBDazXLPND7yl25sEha/RW2VwYDUfrfAijcN3
> VU+DzVeH2nTByePXXAvz7XNShhYYFnTYo4lEp6GmrHQPaUV7KpGtjT2Egn9k97cA
> oyQ90ZowPn0XK7owje8Vi4vV6ZhmVzFi9wlLzX40Dv0grrxOxV5AlrhBavpq+HfJ
> Zz8O6k+bmPGqIWP2udBWULFN8+twSOGMCQgAI3mvAWZC/AfMevlooAkcFviawsk3
> IpVzRktrriVrNPT1LfJzvhRZVNNq4d9BaFKDPSGO1t9Nts5Srs7MzEBoR1LWVHHG
> YoLE6PyE0beUfvHKtyII2M37FSDO+aseQmHk4iPSqg0/TW7P8t5LUZSM/JObSJw2
> /YJMfWy7qC/zbDuTkezEE+7rwR1BZp8w9H7Sotm3on4Xzs3B9WXA9VVZfiiiBFt5
> f7CTnV0mfMoPiOAX7GqVcc/5YlXD7OSh9Ei0MvHYPAWX3eE23ScY309/T2zqBlD9
> DEGQdJ6179roGAWI/HLoy7/BF8iz1o4ahAL0h1s2PkMinYjYfLnvsFDL4aNj/pi0
> itKaf+TNQr9JSqpLEWpjWY4w6V2WmqRSmX424cP4TJX6gUuVsWxrPFn8R7uC/aZW
> KC9uEbM/qOTJuc+ieNYL2hbC7IlV2CyLghKLMyaxrR92Q5SnIG0=
> =gHiN
> -END PGP SIGNATURE-
>
> --
> You received this message because you are subscribed to the Google Groups
> "qubes-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to qubes-users+unsubscr...@googlegroups.com.
> To post to this group, send email to qubes-users@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/17835bd5-6058-8f77-ba38-312f519a3082%40riseup.net
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnWEApyeTVgCvSAuX-%3DL4x7nHHewzc5d-rP9XyTnnUfc1Q%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Custom dom0 wallpaper (a kind of guide)

2018-11-20 Thread pieter lems
Hello everyone,
Today I was customizing my QubesOS and I was running into a few problems
trying to change the dom0 wallpaper. I got it to work eventually and I
wanted to share how I did it. It's not safe to copy any files to dom0 but i
found that it's necessary to be able to use a custom wallpaper. (I'm sorry
if this is not the case). I did find a way to do this in a "sort of" secure
way, removing possible malware embedded in the image.

- First find an image you like to use as a wallpaper and download it.
- Open it using a disposable vm.
- Select full screen in the image viewer and take a screenshot.
- Save the screenshot in dom0
- Copy the screenshot to a trusted VM by using the command :

qvm-copy-to-vm  

- Open the image in an image editor and cut the top border
- Save the image and copy it back to the backgrounds folder in dom0 by
using the command:

qvm-run --pass-io  'cat /path/to/file_in_src_domain' | sudo
tee /usr/share/backgrounds


And voila the wallpaper is in dom0. You can change it by right
clicking on your desktop and selecting desktop settings and then point
the folder to backgrounds

Again sorry if this is not the correct way.

cheers!

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnXh8OF6Yg6HPRn8Gpfnt%3DH7i03%3DVVWi%3DpL3sJ5MRhkSLg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] How can I remove the GUI when booting qubes

2018-11-20 Thread pieter lems
Hello everyone,
First of all i would like to start of thanking the Qubes developers. I've
been using QubesOS for around a month right now and i cannot wish for more.
It's insane how much work you've put into the development of the OS and
that you've come so far.

I was wondering how i can make it so that when qubes is starting i see the
boot information (the output of the boot progress,im not sure how i should
call it). I know that when u press a key it shows the output but i would
like that it always shows. No offence to the GUI tho!

Thanks in advance,
Cheers!

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnVZfV5THRMQV0JsH%2BwNm1SBUdZq2TPKiSLmmqMaSB%3D%3Dwg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Costum qubes order in QVM

2018-11-10 Thread pieter lems
Thanks for the response and sorry for the late response back. Concerning
the question, How didn't i think of that -_-! Thank you for mentioning
this. I've been using qube colors for my qube order. It works pretty well
if you get used to it.

For anyone wanting to use my method, the order of the qube colors is as
follows:
black ( i use it for my templates)
purple ( for sys qubes ex. sys-whonix)
blue ( for disposable vm's)
The rest of the colors can be used for whatever you like , but i use the
red one for qubes which are not connected to a netVM (ex. vault and db vm)
grey
green
yellow
orange
red

cheers!

Op za 10 nov. 2018 om 04:05 schreef Sven Semmler :

> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA256
>
> On 11/2/18 8:20 AM, pieter lems wrote:
> > How does one costumize the order in wich the qubes are displayed.
>
> If you want a solution without programming: use a naming convention. I
> use simple prefix:
>
> app-... for AppVMs
> dvm-... for DispVM templates
> sys-... for system qubes
> sys-dvm-... for disposable system qubes
> tpl-... for templates
>
> Both qvm-ls and qubes-qube-manager will show your qubes somewhat
> ordered that way.
>
> /Sven
> -BEGIN PGP SIGNATURE-
>
> iQIzBAEBCAAdFiEE18ry22WNibwI1qeq2m4We49UH7YFAlvmSwQACgkQ2m4We49U
> H7ZQAA/+JK4PHdoVFFmHYw0VDbQA6Gj2P4WeYtqUaxTdPeH8fdLon+fzmFxe6Wph
> hS/18fvSL9hsX9/UE5L/G2JseedKKReqQheQhhRWsSurZw3+KiWIgi6l+KzSMv6u
> 5mSieodtLZus1LeplYCA0/fHQmNgdE1+ArNTcGNhJfOfHbuacmqdFeq2aaaSNL8q
> 2uPzpwu9wm/O5wcXBg06pNVHQJ5BVm1DBCvUSApONwT+GvdJu/GMz/YeZcPTuS/x
> cB5b4TRkzlhCJJ1ytdStNU/EOgE3q7nXTDcZmlCjssJb3ouRxT0gCI/S5fyEgZmg
> ufcGe80Y/e1ocqGbJwx1IY7EnrZg/y1jqcr+KrCHqoSDSs7SpLjbgN7jUeXgb6Hc
> T73ndVxATbjFt28JZhv2EkiQdadqyl1N7G2a0DJaAY/WTfcgnEETQt9ev0PdY9xP
> OPISKvQ8byxfazJoDL/DByV61PYQ4kCKxh1dOO3jTt/JyJM8TyK9+PQsGaoUNkTe
> 6NH5qeEP0pW8Sv1VTMPHMyD1no+t+1Y9VAXjYhs47Q4zWYcqhi6QAW6YZJuuOuLX
> 0i09++sz2ig6rPjSwLVkzU6576/3q7pJ3v001NiR783SYMEPC+txe+PQw22Fjvyf
> jat+YsZ2D62Juk80ok9K0KzxV6G/z11MGEJSnHS8jqjvADt8h4I=
> =+8Hd
> -END PGP SIGNATURE-
>
> --
> You received this message because you are subscribed to the Google Groups
> "qubes-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to qubes-users+unsubscr...@googlegroups.com.
> To post to this group, send email to qubes-users@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/8d88df08-f7f6-e6c5-ed2d-dfcbb15d725a%40SvenSemmler.org
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnV9UbeRqq0fPN240ALRmdUR8k7rJ%2BOgXP0D_3NZhbxJWg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Vertrauliche Nachricht von Sebastian Schatter

2018-11-10 Thread pieter lems
For the people that don't understand German or don't bother to translate it
here you go:


--
Good day,

I have just sent a confidential message to Tutanota (https://tutanota.com).
Tutanota automatically encrypts emails end-to-end, including all
attachments. The following link leads to the encrypted mailbox, from which
you can also answer in encrypted form:

Show encrypted message

Or copy this link to the browser:
https://app.tutanota.com/#mail/LQzEzz4131kbz7xTfTUj_JA7h57f5w

This e-mail was generated automatically for the transmission of the link.
The link will remain valid until I send a new confidential email.

many Greetings

--

It's an auto message so not sure if it has any meaning.
Cheers!

On Sat, Nov 10, 2018, 9:11 PM Sebastian Schatter  wrote:

> Guten Tag,
>
> ich habe gerade eine vertrauliche Nachricht mit Tutanota (
> https://tutanota.com) gesendet. Tutanota verschlüsselt E-Mails
> automatisch Ende-zu-Ende, inklusive aller Anhänge. Der folgende Link führt
> zur verschlüsselten Mailbox, von der aus auch verschlüsselt geantwortet
> werden kann:
>
> Verschlüsselte Nachricht anzeigen
> 
>
> Oder kopiere diesen Link in den Browser:
> https://app.tutanota.com/#mail/LQzEzz4131kbz7xTfTUj_JA7h57f5w
>
> Diese E-Mail wurde für die Übermittlung des Links automatisch erzeugt. Der
> Link bleibt gültig, bis ich eine neue vertrauliche E-Mail sende.
>
> Viele Grüße
> Sebastian Schatter
>
> --
> You received this message because you are subscribed to the Google Groups
> "qubes-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to qubes-users+unsubscr...@googlegroups.com.
> To post to this group, send email to qubes-users@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/LQzF-1G--V-1%40tuta.io
> 
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnVe-w%2BZ17Hs7%3Df_PM_C2%2Bw24bc8Lt3wgNdOUWzUedqNVA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Where is Chrome once installed?

2018-11-09 Thread pieter lems
Which method was it. It can be handy if other users can also profit if they
run into the same problem. Glad you fixed it!

On Fri, Nov 9, 2018, 3:06 PM William Fisher  wrote:

> I tried 3 different methods last night, finally one worked and it showed
> up for me this morning after restart.
>
> Thanks
>
> On Fri, Nov 9, 2018 at 8:01 AM unman  wrote:
>
>> On Thu, Nov 08, 2018 at 08:35:59PM -0800, William Fisher wrote:
>> > I tried that command in Qubes 4. I created a VM for chrome and started
>> it using the Chrome App listed on the VM and nothing. No Chrome, no
>> errors no nothing!
>> >
>>
>> You have trimmed the previous material so it's completely unclear what
>> you are referring to. :-(
>>
>> This works for me:
>> In Templates:
>> Debian - sudo apt install chromium
>>
>> Fedora - Download rpm from chrome site and install using 'dnf install
>> chromerpm'
>>
>> Creating qubes based on these templates produces correct menu items ,
>> and selecting the menu item starts the qube and opens chrome (or
>> chromium)
>>
>> It seems that this hasn't worked for you.
>> Can you please say what template you have are using, and what steps you
>> took
>> to install chrome.
>>
>> unman
>>
>>
>>
>>
>>
>>
>> --
>> You received this message because you are subscribed to a topic in the
>> Google Groups "qubes-users" group.
>> To unsubscribe from this topic, visit
>> https://groups.google.com/d/topic/qubes-users/vYRrfdp05RA/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to
>> qubes-users+unsubscr...@googlegroups.com.
>> To post to this group, send email to qubes-users@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/qubes-users/20181109140141.ky5k3artaavx5ytj%40thirdeyesecurity.org
>> .
>> For more options, visit https://groups.google.com/d/optout.
>>
> --
> You received this message because you are subscribed to the Google Groups
> "qubes-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to qubes-users+unsubscr...@googlegroups.com.
> To post to this group, send email to qubes-users@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/CAJyh_i-PY58kWvh4GDZg6YpSJ%2BXYD-AKzwF-femWE_LgYtg8rQ%40mail.gmail.com
> 
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnUpJA1bw_F1vdC-UTS164CY%3DzTdrBcJq9eo5rGaeQB_KA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Where is Chrome once installed?

2018-11-09 Thread pieter lems
Did you install chrome in a template VM? If yes select the AppVM (in which
you want to use chrome) in the qube-manager and edit the settings so that
the AppVm uses chrome.
Hope this helps. Otherwise check out the tasks at the bottom of the page at
this link : https://www.qubes-os.org/doc/software-update-vm/

On Fri, Nov 9, 2018, 5:36 AM William Fisher  wrote:

> I tried that command in Qubes 4. I created a VM for chrome and started it
> using the Chrome App listed on the VM and nothing. No Chrome, no errors
> no nothing!
>
> --
> You received this message because you are subscribed to the Google Groups
> "qubes-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to qubes-users+unsubscr...@googlegroups.com.
> To post to this group, send email to qubes-users@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/55f59e53-3209-4469-9df0-d998e21ec88b%40googlegroups.com
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnVe%2BwhiJ7HjDxVXkQDQF8eYfPhsGzukT4n8vBtqJQKMmA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Qubes menu failing. Come on guys

2018-11-08 Thread pieter lems
I don't mean this in a bad way but isn't 4.0.1 a testing release? if you
are using qubes for important things you should stick with 4.0 as of now.
(it's also mentioned in the release notes) Devs are no wizards.  :)
I hope you get it working.

Op do 8 nov. 2018 om 13:45 schreef unman :

> On Wed, Nov 07, 2018 at 08:14:23PM -0800, Ryan Tate wrote:
> > I don't know what is going on with 4.0.1 but suddenly my machine is
> haywire.
> >
> > The latest is everything above and below the VMs is gone from the Qubes
> menu. The bottom of the menu where I'd go to shut down just says "No
> applications found." The top where I would go to find settings, Qubes
> Manager, even the dom0 Terminal is just gone. So I don't even know how to
> debug. I've rebooting several times, it keeps happening.
> >
> > I know Qubes is fairly high maintenance but I had a nice groove going
> with qubes 4 finally. Whatever updates you are pushing down with 4.0.1
> updates are breaking my workflow left and right. First whonix got borked
> now the Qubes menu is broken. I shudder to think what will be next to fail.
> This is frustrating. Some of us are actually trying to get work done in the
> OS.
> >
>
> Hi Ryan
>
> Are you using Xfce? (The default desktop environment in Qubes)
>
> Had you made any changes to the menu system?
> Can you check the contents of /etc/xdg/menus/xfce-applications.menu to
> make sure you still have a Menu item for System Tools. If you're not
> sure just post the contents here.
>
> There was a problem in the past with .desktop files disappearing.
> can you make sure that you have .desktop files in
> /usr/share/applications ?
>
> unman
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "qubes-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to qubes-users+unsubscr...@googlegroups.com.
> To post to this group, send email to qubes-users@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/20181108124520.52omyiakelmg6x4b%40thirdeyesecurity.org
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnXwV_SZRnc9APc2tz9tDbD5dRO-gfS8yXexWOqLnyKtEg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Cant restore backup Qubes4.0.1-rc1

2018-11-08 Thread pieter lems
Yes, i just opened an issue related to the problem.
Here it is:
https://github.com/QubesOS/qubes-issues/issues/4493

Op do 8 nov. 2018 om 16:09 schreef donoban :

> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA256
>
> On 11/8/18 3:39 PM, pieter lems wrote:
> > Okay so i reinstalled Qubes 4.0 and retried process. This works so
> > i think it's a bug related to qubes 4.0.1-rc1. I'm going to create
> > an issue now. Massive Thanks for the help tho!
> >
>
> Oh, great news. Could you open a issue for this?
> -BEGIN PGP SIGNATURE-
>
> iQIzBAEBCAAdFiEEznLCgPSfWTT+LPrmFBMQ2OPtCKUFAlvkUbgACgkQFBMQ2OPt
> CKXpVhAAnLVpR780sF3MUirtZOJWrdKZyC97FDyGZY27n4eyJr3UuB8B+GG/XQLq
> LaFkl7f8+l/OrlsD8mrnRkA5/NqMKymbxhzB+L2df07eEU4erH3xTtgAECeT2OoG
> y58kFku3UEdwMP/cUOzsLi7AYDujQ3h4daYSESdrs4e8Xynw6knPf2bg0bSQTP9Z
> QhchNq9ZX8j9CVqrJOjMGuZfv0l+MKjZLud0oFijBHNpsbSVp0vTcZ6I7GyLTeiO
> rbpmBTHv5+T5CIavsuc5yLJSzTjoshOjF9Dy2sdgQh8QYuTUnQNkucr1/VyJrIpL
> pfCK6EyB45s18zgp+awwWmqP8Okc2ikg2MapdiugpbbLveOHnliPvsdCTw+5oLQw
> M7fxUbGKS+Yud3nYENyp9FmmsuSo67G3PmbMcsMOpmoAxGhr0FcFOIPMaINCfSTC
> Tu1rGklcj9PdTC2imF6oANLNJBpDVDHV0MPHUWSE3KkMv2enJvDi7AFmrQvtzlNT
> r+HxUY40BhCtHTeXZwiowGQeS/gSD6r0uSkWwwvgdVNXDOGMnFCn2gsLepZWmTse
> +Vkq6ZGUpnGamdDqGcIrQ3/ZBL+D/82gSQ+on1rLtKO0lfSKhwbN6RV4vu66OsHI
> vHmgwdRMuVh7ROGM1wcBWGUMM7A9vMbL06oXXMd0y/VXPL2tW78=
> =QiCN
> -END PGP SIGNATURE-
>
> --
> You received this message because you are subscribed to the Google Groups
> "qubes-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to qubes-users+unsubscr...@googlegroups.com.
> To post to this group, send email to qubes-users@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/dee869cd-3c67-eaae-5e42-cbdec1cdfc28%40riseup.net
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnWpsz%3DXj0KJ5ZA6AbZCcvwuLdogGujwZhHrV%3D2k23seAg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Cant restore backup Qubes4.0.1-rc1

2018-11-08 Thread pieter lems
Okay so i reinstalled Qubes 4.0 and retried process. This works so i think
it's a bug related to qubes 4.0.1-rc1. I'm going to create an issue now.
Massive Thanks for the help tho!


On Thu, Nov 8, 2018, 3:08 PM pieter lems  wrote:

> Nope after I installed Q4.0.1-rc1 i immediatly created a backup of all the
> qubes. Then i tried to restore one of them. Without any luck. So i backed
> them up seperatly and tried restoring again. Agian without any luck. Then i
> backed up a qube on an usb and tried to restore. This also didnt work. Now
> im reinstalling qubes 4.0 to check wether that works. If not I am to blame.
>
> On Nov 8, 2018 3:03 PM, "donoban"  wrote:
>
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA256
>
> On 11/8/18 2:43 PM, pieter lems wrote:
> > Yes I've made 18 different backups as of now and i keep getting the
> > same problem. Again thanks for the response and i will create An
> > issue. Pieter Lems
> >
>
> Are the backups from Qubes 3.2?
> -BEGIN PGP SIGNATURE-
>
> iQIzBAEBCAAdFiEEznLCgPSfWTT+LPrmFBMQ2OPtCKUFAlvkQhgACgkQFBMQ2OPt
> CKVCsRAAjAUg5+kSBwnjADScqBx8XzLtEjRX2KnxVAVId+najzD7K0hiS1DzQjuC
> 1Wm7Z7d3DyWsdf1KYTkp4b0+LmdF5vj7bwMWlx5PvVI0+DbV1HAjXImCJ/KK6qAQ
> fIKEnb3rlg6hYQxm6h6r6qxOD++Bi6EbtqG23+kb+b/Bl7SkN+w4+pjSD+nYwxAW
> PrTDfgrlMg5xlfhmXZCJEgV7P2XXyj40kVWrRdORgPZQ3zICp/9f7JlT7RxwRrYh
> XqjNY5Mlv79a/Q+KcsFx8Ha4G/mkXMpIB5fQKHHu00iacbYBZPJZfBYAddTG54oE
> Mxtnd1oLQozZLB6g3Pp2RU4P+kvipNRSiDBb/uOlNWRFbWaA2ClN6bOzPYsuu4zP
> fx/g34YHDaGSqAapTFpNVy0dksqs9w23FI2tx/xoPYRiE5KsqwQAL3H536Bal1gn
> BMJR7yhKtaKUDEpwqNdLjzDC5+Swu3EIbdJzpqoRq0RpLX2GYgvzsnsYzTLmhFJD
> hwF2P34RBSgjZqAbCTaxpXdethA4YfNjrdi08M5ZonJsVtZ1q/ZxuAOzRNPQuBuI
> cO3/1KTNuI7Du4C+xlr2pP6YsKoFuP7Gd+vbUDLcpBHIgBDUeOXQfgHc3DzNcwrc
> Ia8N8ZuBMhUFp536HbM8f9QlEPIwpXSt5daF5LTFweZG2qf90CQ=
> =lD4U
> -END PGP SIGNATURE-
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnVGzuUNYgQ-%2BeM-unq-%3D0prvNfs-haxap1XJHbX4b%2B%2BJw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Re: Cant restore backup Qubes4.0.1-rc1

2018-11-08 Thread pieter lems
hello, i reinstalled qubes hoping to solve the problem, without any succes
tho.:(

On Thu, Nov 8, 2018, 1:27 AM pieter lems  wrote:

> Hello everyone. I've been working with Qubes4.0.1-rc1 since its release
> and i haven't encountered any problems yet. Today I tried to restore a
> backup but everytime the error message: "failed to decrypt
> var/tmp/restore2su_c2ze/qubes.xml.000.enc: b'scrypt: Passphrase is
> incorrect\n' " keeps popping up. I'm 100% sure the password is correct
> since I changed it a couple of times to be only one letter.
> I've also tried a solution offered in previous problem which is kind of
> simmilar as mine.
> In  usr/lib/python3.5/site-packages/qubesadmin/backup/core3.py at line 134
> change it to:
> vm.label = vm.properties.pop('label')
> Try:
> Vm.label=self.labels[vm.label]
> Except KeyError:
> Pass
>
> This didn't fix the issue sadly.
> Is there someone that knows what te problem is.
> Thanks in advance,
> Pieter Lems
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnX8EP6E1W%2BSrrJR5MZCNcgjP6Lh1mUv8x4jtNsNZ3XsFA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Cant restore backup Qubes4.0.1-rc1

2018-11-07 Thread pieter lems
Hello everyone. I've been working with Qubes4.0.1-rc1 since its release and
i haven't encountered any problems yet. Today I tried to restore a backup
but everytime the error message: "failed to decrypt
var/tmp/restore2su_c2ze/qubes.xml.000.enc: b'scrypt: Passphrase is
incorrect\n' " keeps popping up. I'm 100% sure the password is correct
since I changed it a couple of times to be only one letter.
I've also tried a solution offered in previous problem which is kind of
simmilar as mine.
In  usr/lib/python3.5/site-packages/qubesadmin/backup/core3.py at line 134
change it to:
vm.label = vm.properties.pop('label')
Try:
Vm.label=self.labels[vm.label]
Except KeyError:
Pass

This didn't fix the issue sadly.
Is there someone that knows what te problem is.
Thanks in advance,
Pieter Lems

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnWp2SHYmcMbUUpYuMe8NhQZCNNerc0oUOKUCxRzV-ASgQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Donating to qubes

2018-11-02 Thread pieter lems
Hello again everyone. I'm sorry for posting for the second time today but i
have a question related to qubes donations. I know it's possible to donate
by using ur credit card and by using bitcoin. The question is as follows:
Are there any other options available for donating such as paypal or IDeal
(for people from Holland)? If not is it possible to create those options
for people that either dont use a credit card or are not familliar with
bitcoins?
Thanks again in advance.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnWeJYgYFk2xFhqbkT_k2SY%3DS4r_eKpvS1wGNaaBpHmg6w%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Costum qubes order in QVM

2018-11-02 Thread pieter lems
Thanks for the quick response. I will certainly look into it and keep you
guys up to date. :)

On Fri, Nov 2, 2018, 3:17 PM unman  wrote:

> On Fri, Nov 02, 2018 at 02:20:26PM +0100, pieter lems wrote:
> > How does one costumize the order in wich the qubes are displayed. I would
> > like to have a more well-aranged order for simplisity.
> > Thanks in advance
>
> There arent options for doing this: partly because people's ideas about
> what would constitute "a more well-aranged order "
> If you want the ability to move rows about in the Manager, you will need
> to adapt the code in
> /usr/lib/python3.5/site-packages/qubesmanager to accomodate this.
> If you decide to pursue this please consider feeding back to github so
> that others can have this feature to.
>
> unman
>
> --
> You received this message because you are subscribed to the Google Groups
> "qubes-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to qubes-users+unsubscr...@googlegroups.com.
> To post to this group, send email to qubes-users@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/20181102141749.zlz43otz3dglgrvq%40thirdeyesecurity.org
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnUAXTJhh0rMPZwtBUeggXiaq4oKp7nfpvBxrM7Ke8vQ7A%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Costum qubes order in QVM

2018-11-02 Thread pieter lems
How does one costumize the order in wich the qubes are displayed. I would
like to have a more well-aranged order for simplisity.
Thanks in advance

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnV5rDifZjGO5s%2BQK92WyMRDdPN3BcVO1Oc7O%3DGV9AnjtQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] My farewell to Qubes OS!

2018-10-25 Thread pieter lems
I have not been a Qubes user for long now, but i want to thank you for your
service. You are a true hero to the community. Thank you and good luck with
your new adventure!!

On Thu, Oct 25, 2018, 12:21 PM Joanna Rutkowska <
joa...@invisiblethingslab.com> wrote:

> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA256
>
> Hello Qubes devs and users!
>
> It's been nearly 9 years[*] since I sent the first internal email
> within ITL to Rafał Wojtczuk and Alex Tereshkin with the original idea
> for making Qubes OS. Shortly after this, we started drafting the
> original architecture and writing some early PoC code...
>
> Today, I've made an announcement I'm switching focus to another area
> of work and joining the Golem Project as a Chief {Strategy, Security}
> Officer:
>
> https://www.qubes-os.org/news/2018/10/25/the-next-chapter/
>
>
> https://blog.golemproject.net/joanna-rutkowska-joins-golem-as-chief-strategy-security-officer-13f12f0c11c0
>
> I'd like to thank all the people who made Qubes OS possible, which
> includes: the whole ITL team, all the community contributors, and, of
> course, all the Qubes OS users!
>
> Qubes OS will continue under the lead of Marek Marczykowski-Górecki,
> who have been a de-facto lead for all the day-to-day development for
> quite some time already!
>
> Thanks, Marek! Thank you, all!
>
> Cheers,
> joanna.
>
> [*] FWIW, the exact date was November 11th, 2009.
> -BEGIN PGP SIGNATURE-
>
> iQIzBAEBCAAdFiEEtR14vbBDAuE0X2Ly1F2dklVl1NIFAlvRmTYACgkQ1F2dklVl
> 1NIiDxAAtwm3qM1Rq3ow67q5bLu+1VnuM0NQrN/crLu+FDOdaa9XNzSsdWz97UoN
> 2VsRO+RICNttrR7MAaWSgTXtBKOMuSXYc7s5r7VVFtx4qW0xyRaxbr7vBqJRDM5n
> 6eCLdjAFf1Xh8Ju5eDnBJGx41EIywO4Jba3z9+Ww2xyBycQAYY22yRQf6ANlWfwW
> XE0HgBuaJtAEReJc7qpzlG/iwLa/de1eqVa9kOS4HrESllE9wP7qXLrnmwr/yH19
> 2twe3QVS29uVYzPOam6PiCg1PN4AjsYKvihy/Tap11bYfdr1L8OjmE9+KrDPFPek
> MaWlkl/OoiFZsQHhj1somMfFNKH82oTW3zIAZCmmOZgQHgt6T1KDzjehFTASJeFp
> WNmvmowDYfcVYEdjEXQKP78mpxlYz6fChr/A4x3TX64+KsltdZA7l266OMfpXvL4
> Mja4SUvEKqLbyEQxCaDnOwm4cV7k/dHtOXE5fREzUfi+YVu14yVNkPRxg9UpgtCa
> sV/PY7AwOe4JqxV+8VlWWmX0amNf8ZEtz51F2eH6NZZYGaRtTXxTKW6Aad0XHg7p
> 8m2gvH8YWnGPX7ckofcpL7NHR5B6EauXoHKeQZgV9Ix0NQf2CNvBv5ZxZ7IYannH
> mJEcpgRYMtG5b8+x05hBCb7CP5T/tQpt2r5jIK3eqwEzcPY//H8=
> =1ZqA
> -END PGP SIGNATURE-
>
> --
> You received this message because you are subscribed to the Google Groups
> "qubes-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to qubes-users+unsubscr...@googlegroups.com.
> To post to this group, send email to qubes-users@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/20181025102143.GC3938%40work-mutt
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnX1N_iQPgBOg%3DgovfHLGSpOCSe-dN0Tx5YO%3DTA300ZOnw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] HCL: HP Spectre X360 - 15" i7-8550u 16GB / 512GB / GeForce MX150 /Intel 802.11b/g/n/ac Wi-Fi

2018-08-29 Thread pieter lems
thank you for that i have the same laptop. when running multiple vm's the
fan spins up pretty hard tho.

On Aug 28, 2018 7:18 PM,  wrote:

> Hello,
> I've successfully installed Qubes OS R4.0 on an HP Spectre x360 with the
> following specs:
>
>
> CPU: 1.8GHz Intel Core i7-8550U (quad-core, 8MB cache, up to 4.0GHz with
> Turbo Boost)
> Graphics: Nvidia GeForce MX150 (2GB GDDR5 RAM); Intel UHD Graphics 620
> RAM: 16GB DDR4
> Screen: 15.6-inch 4K UHD (3,840 x 2,160) IPS WLED backlit
> Storage: 512GB SSD (PCIe NVMe M.2)
> Ports: 1 x Thunderbolt 3, 1 x USB-C 3.1, 1 x USB 3.1 Type-A, 1 x HDMI, 1 x
> 3.5mm audio jack, 1 x SD card reader
> Connectivity: Intel 802.11b/g/n/ac Wi-Fi (2x2), Bluetooth 4.2
> Camera: FHD webcam
>
> Enabled virtualization in the BIOS and that was it.
>
> Qubes OS works out of the box, everything I tested so far including the
> touch screen.
>
> Martin
>
> --
> You received this message because you are subscribed to the Google Groups
> "qubes-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to qubes-users+unsubscr...@googlegroups.com.
> To post to this group, send email to qubes-users@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/
> msgid/qubes-users/5ca20ce1-88ec-4e10-ac1e-17c5ef5b3e87%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnWT8qdX1C_MK5v2piyJNtC%3DE72RLiQ%2BXTHvn4T-N2srWw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Re: [qubes-users] Install Qubes on a specific partition ?

2018-08-29 Thread pieter lems
sorry pretty new to this google groups,
again yes its possible. you should be carefull since dual booting can
comprimes security in some ways. (read the qubes docs for more info)
when installing just select the 100gb parition en select clear space and it
should work. Again i would recommend to instal it on another drive if your
dual booting. im planning on creating a tut, if you want it , it should be
online in like a week or 2.

On Aug 29, 2018 8:14 PM,  wrote:

> Hello,
>
> I have a 1TB usb drive which is not empty (Has around 10GB of files that I
> wish to keep)
> I have created a partition of 100GB on this drive.
>
> Is it possible to install Qubes only on that partition ? The Install doc
> does say "use the whole disk rather than a partition" but is that a best
> practice or will it fail all together ?
>
> Thanks!
>
> --
> You received this message because you are subscribed to the Google Groups
> "qubes-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to qubes-users+unsubscr...@googlegroups.com.
> To post to this group, send email to qubes-users@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/
> msgid/qubes-users/0fc3079a-30f8-4b9f-b310-2c44b9c099eb%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnV2Q9AnX0aWtG_-1RKZYfRW3ALaFysNZcqyaf3qVBhvRA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] Re: HP Spectre X360 13-ae010nd QubesOS installation problem: HAP/SLAT/EPT/RVI not supported

2018-05-26 Thread pieter lems
Op zaterdag 26 mei 2018 20:23:24 UTC+2 schreef pieter lems:
> Good afternoon,
> First of all my appoligies if my english is not 100% correct.
> 
> 
> Secondly,
> When I tried to install QubesOS V4 it gave me an error message saying that my 
> hardware lacks the features required to procceed. The error was about my 
> hardware missing HAP/SLAT/EPT/RVI support.
> After doing some research I came to the conlussion that my hardware does 
> support the listed requirements. My CPU is an Intel i7-8550U wich according 
> to the Intel website supports all the needed features see here:
> https://ark.intel.com/products/122589/Intel-Core-i7-8550U-Processor-8M-Cache-up-to-4_00-GHz
> 
> 
> after that I installed a tool called Coreinfo to check wether my CPU 
> supported SLAT wich it does.
> So right now I'm a little bit hazey on what to do. below you can see a 
> picture of the results.
> 
> 
> 
> 
> 
> Im sorry if it's my fault for not understanding correctly but i really want 
> qubes to work on my device. I hope i provided enough information. Thanks in 
> advance

Okay so I just found out what the problem was. 
My Virtualisation Technology wasn't enabled in my BIOS. I hope this post can 
help other people with the same problem. 

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/460ee747-3da6-44a5-838c-0f14dca55fb0%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


[qubes-users] HP Spectre X360 13-ae010nd QubesOS installation problem: HAP/SLAT/EPT/RVI not supported

2018-05-26 Thread pieter lems
Good afternoon,
First of all my appoligies if my english is not 100% correct.

Secondly,
When I tried to install QubesOS V4 it gave me an error message saying that
my hardware lacks the features required to procceed. The error was about my
hardware missing HAP/SLAT/EPT/RVI support.
After doing some research I came to the conlussion that my hardware does
support the listed requirements. My CPU is an Intel i7-8550U wich according
to the Intel website supports all the needed features see here:
https://ark.intel.com/products/122589/Intel-Core-i7-8550U-Processor-8M-Cache-up-to-4_00-GHz

after that I installed a tool called Coreinfo to check wether my CPU
supported SLAT wich it does.
So right now I'm a little bit hazey on what to do. below you can see a
picture of the results.



Im sorry if it's my fault for not understanding correctly but i really want
qubes to work on my device. I hope i provided enough information. Thanks in
advance

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAK8vAnVorS-ie8RoXy%2BbLkppWGtr-A6Uzp_AvcYRNzwdw7ztgA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.