Re: [qubes-users] fedora-29-minimal sys-net/firewall problem
Thanks to Ivan, I figured it out (with a bit of luck). After comparing packages in his working template to my own, I first tried to install: dbus-glib ipcalc iproute iproute-tc iputils That fixed it as far as I can tell. I now have a working sys-net and sys-firewall with the fedora-29-minimal template. I'm assuming the ip* packages were the key, but I don't really have any idea. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/42665bc4-0ec5-4ded-9010-0c5fcf8173f8%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] fedora-29-minimal sys-net/firewall problem
On Friday, January 11, 2019 at 7:49:36 PM UTC, Ivan Mitev wrote:
> Not sure it'll help but here's a git below with a list of the rpms
> installed in the templateVM of my sys-{net,firewall} vms so you can
> compare and check if you're missing something; the templateVM is a
> minimal fedora install but unlike yours its initial version was f26,
> upgraded to f28 and then to f29.
>
> https://gist.github.com/taradiddles/7db0970d464a5129213c3626c69fb1a3
>
> a crude way to generate such list in your templateVM:
>
> rpm -qa | sort | sed -e 's/-[0-9\.-].*//' > allrpms
>
> and then find differences:
>
> grep -xvf list_rpms_f29-1.txt allrpms
>
> (there will be a few packages that I have installed that are not needed
> for networking, eg. keepassxc, rsync, encfs, ...).
Thanks for that. I compared your rpm file to what I have in my
fedora-29-minimal clone for sys-net and sys-firewall, and the following
packages are the ones that you have in your working template which I do not
have in my non-working template:
aajohan-comfortaa-fonts
abattis-cantarell-fonts
adwaita-gtk2-theme
alsa-lib
annobin
atlas
avahi-glib
bc
binutils
boost-iostreams
boost-random
boost-system
boost-thread
brotli
bubblewrap
busybox
bzip2
bzip2-libs
cdparanoia-libs
cpp
cryptsetup
curl
dbus-glib
dejavu-sans-mono-fonts
device-mapper-multipath
device-mapper-multipath-libs
dkms
dosfstools
dwz
efi-srpm-macros
elfutils-libelf-devel
elfutils-libs
enca
exempi
exiv2
exiv2-libs
fedora-logos
fedora-obsolete-packages
flac-libs
fpc-srpm-macros
fuse
fuse-common
fuse-encfs
gcc
gcc-c++
gdisk
GeoIP
GeoIP-GeoLite-data
geolite2-city
geolite2-country
ghc-srpm-macros
ghostscript
ghostscript-core
ghostscript-fonts
ghostscript-tools-fonts
ghostscript-tools-printing
giflib
glibc-devel
glibc-headers
glx-utils
gmime
gmime30
gnat-srpm-macros
gnome-autoar
gnome-desktop3
gnome-themes-extra
go-srpm-macros
google-noto-emoji-color-fonts
gpg-pubkey
gpg-pubkey
groff-base
grub2-pc
grub2-pc-modules
grub2-tools-efi
grub2-tools-extra
gstreamer1
gstreamer1-plugins-base
gtk2
gvfs
gvfs-client
ipcalc
iproute
iproute-tc
iputils
isl
iso-codes
iw
iwl7260-firmware
keepassxc
kernel
kernel
kernel
kernel-core
kernel-core
kernel-core
kernel-devel
kernel-devel
kernel-devel
kernel-headers
kernel-modules
kernel-modules
kernel-modules
libaio
libatasmart
libblockdev
libblockdev-crypto
libblockdev-fs
libblockdev-loop
libblockdev-mdraid
libblockdev-part
libblockdev-swap
libblockdev-utils
libbluray
libbytesize
libcdio
libcdio-paranoia
libcue
libcurl
libexif
libgexiv2
libglvnd-gles
libgrss
libgsf
libgxps
libicu
libimobiledevice
libiptcdata
libmetalink
libmodulemd
libmpc
libnsl
libogg
libosinfo
libplist
libquvi
libquvi-scripts
librados2
libsodium
libssh
libstdc++-devel
libtheora
libudisks2
libusbmuxd
libvisual
libvorbis
libxcrypt-devel
libXfont
libxkbcommon-x11
libxslt
libXv
libyubikey
linux-atm-libs
linux-firmware
llvm-libs
lttng-ust
lua
lua-expat
lua-json
lua-lpeg
lua-socket
lzo
mdadm
mesa-dri-drivers
mesa-filesystem
nautilus
nautilus-extensions
nautilus-python
netconsole-service
network-scripts
nim-srpm-macros
nspr
nss
nss-pem
nss-softokn
nss-softokn-freebl
nss-sysinit
nss-tools
nss-util
ntfs
ntfsprogs
ocaml-srpm-macros
openblas-srpm-macros
opus
orc
osinfo-db
osinfo-db-tools
parted
pcre2
pcre2-utf16
perl
perl-Algorithm-Diff
perl-Archive-Tar
perl-Archive-Zip
perl-Attribute-Handlers
perl-autodie
perl-B-Debug
perl-bignum
perl-Carp
perl-Compress-Bzip2
perl-Compress-Raw-Bzip2
perl-Compress-Raw-Zlib
perl-Config-Perl-V
perl-constant
perl-CPAN
perl-CPAN-Meta
perl-CPAN-Meta-Requirements
perl-CPAN-Meta-YAML
perl-Data-Dumper
perl-Data-OptList
perl-Data-Section
perl-DB_File
perl-devel
perl-Devel-Peek
perl-Devel-PPPort
perl-Devel-SelfStubber
perl-Devel-Size
perl-Digest
perl-Digest-MD5
perl-Digest-SHA
perl-Encode
perl-Encode-devel
perl-Encode-Locale
perl-encoding
perl-Env
perl-Errno
perl-experimental
perl-Exporter
perl-ExtUtils-CBuilder
perl-ExtUtils-Command
perl-ExtUtils-Embed
perl-ExtUtils-Install
perl-ExtUtils-MakeMaker
perl-ExtUtils-Manifest
perl-ExtUtils-Miniperl
perl-ExtUtils-MM-Utils
perl-ExtUtils-ParseXS
perl-File-Fetch
perl-File-HomeDir
perl-File-Path
perl-File-Temp
perl-File-Which
perl-Filter
perl-Filter-Simple
perl-Getopt-Long
perl-HTTP-Tiny
perl-inc-latest
perl-interpreter
perl-IO
perl-IO-Compress
perl-IO-Socket-IP
perl-IO-Socket-SSL
perl-IO-Zlib
perl-IPC-Cmd
perl-IPC-System-Simple
perl-IPC-SysV
perl-JSON-PP
perl-libnet
perl-libnetcfg
perl-libs
perl-local-lib
perl-Locale-Codes
perl-Locale-Maketext
perl-Locale-Maketext-Simple
perl-macros
perl-Math-BigInt
perl-Math-BigInt-FastCalc
perl-Math-BigRat
perl-Math-Complex
perl-Memoize
perl-MIME-Base64
perl-Module-Build
perl-Module-CoreList
perl-Module-CoreList-tools
perl-Module-Load
perl-Module-Load-Conditional
perl-Module-Loaded
perl-Module-Metadata
perl-Mozilla-CA
perl-MRO-Compat
perl-Net-Ping
perl-Net-SSLeay
perl-open
perl-Package-Generator
perl-Params-Check
perl-Params-Util
perl-parent
perl-PathTools
perl-Perl-OSType
perl-perlfaq
Re: [qubes-users] fedora-29-minimal sys-net/firewall problem
On Friday, January 11, 2019 at 6:48:06 PM UTC, 799 wrote: > I was running into the same issues and have already open a question here. > Strangely it will work if you use the FAT fedora-29 template out of the box > ... so it seems we are missing some packages/settings. Thanks for the reply. I had been following that thread of yours and hoping someone would have an answer, but I have to assume the same thing: something is missing. Hopefully someone will answer this question so that my wife will stop asking me what the hell I'm doing sitting in front of my laptop all night :) -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/2dfdbc8e-0eb2-4b56-af8a-927a6051590c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] fedora-29-minimal sys-net/firewall problem
I've been using Qubes for about 1 year now, and I wanted to try using a minimal template on my Dell XPS 13 laptop for the sake of conserving space. I've installed the packages recommended at https://www.qubes-os.org/doc/templates/fedora-minimal/ for sys-net and sys-firewall and I also had to copy the /usr/lib/firmware/ath10k from my fedora-28 template to the fedora-29-minimal clone in order to get my wifi to work. Under the fedora-29-minimal template clone I can connect to wifi. With both sys-net and sys-firewall using the minimal template, both templates and dom0 are able to update, so I know there is connectivity. However, I am unable to get any internet connectivity in my appvms. I have no expertise in the realm of troubleshooting these problems. I am just knowledgable enough to sometimes figure stuff out and sometimes screw things up. Any help would be appreciated. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/58364d9d-5aec-45be-bc5f-fbba3c23d555%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Qube manager has unexpectedly stopped working
On Monday, August 13, 2018 at 6:28:22 PM UTC, awokd wrote: > Do not reboot. Backup everything immediately. It is bad if your thin pool > is running low, and may have caused the issue. Once that's done, it's > probably safest to reinstall... Too late not to reboot. No lost information though, so that won't be a problem. Just was hoping to save the time required for a reinstall. Thanks for the info. I'll just go ahead and reinstall. Can you tell me what I did or how to avoid this issue with the thin pool in the future? Was I just taxing my system resources too heavily? I'll have to look into it because I don't really even know what the thin pool is. Thanks -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/9a971f77-87a1-4d66-8822-03bb96c6eb9f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Qube manager has unexpectedly stopped working
Have had Qubes 4 running smoothly until just now. Upon startup Qube Manager no longer loads, and when I try to start it from the menu I get an error: "QubesDaemonCommunicationError: Failed to connect to qubesd service: [Errno 2] No such file or directory at line 9 of file /usr/bin/qubes-qube-manager." This has proven to be out of my league in terms of being able to troubleshoot, so I was hoping someone could point me in the right direction for a fix so that I don't have to wipe everything and start over on this machine. It may be relevant that just prior to this happening I had a warning pop up that had something to do with low memory in something that was called "LVM thin pool" or something similar to that. Thanks to anyone with suggestions! -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/7db8b3a4-805f-44e9-b9dc-ad9c53f144c2%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Re: Split GPG and Emacs/mu4e: able to retrieve email but not send
On Sunday, January 28, 2018 at 6:10:36 PM UTC, [799] wrote: > Hello Rumsey, > > >> I can now send email using emacs/mu4e > >> and Qubes split gpg > > I am also interested in this setup. Can you give me some more information > what needs to be done to start from a plain installation? > Something like a copy of the relevant configuration files (stripping out the > personal configuration of course by replacing it with something like > MAILSERVER.COM, logi...@domain.com, YOUR-GPG-KEY-ID etc). > > Would really appreciate this, to get things up and running. > > [799] Are you asking about how to get mu4e up and running in emacs? If so, that is outside the scope of this message group and I'm certainly not the best place to go for information. I would suggest doing your googles, as there are many guides for this process available scattered about. Briefly, I have found that I'm happy with the an email setup that uses mu4e (https://www.djcbsoftware.nl/code/mu/mu4e.html) for interacting with email in emacs. I use isync/mbsync (http://isync.sourceforge.net/) for getting my mail from the server. Guides like this one: http://www.macs.hw.ac.uk/~rs46/posts/2014-01-13-mu4e-email-client.html ...are helpful for giving you a template on how to set everything up, and it's just a matter of wading through the details to get it tuned to your own liking. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/bd96a75e-255d-4e51-9e50-3a26e3ae0387%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: Split GPG and Emacs/mu4e: able to retrieve email but not send
Apparently creating a post for help is like replacing something you've lost, only to find it immediately after replacing it. Here's the solution to this problem: Apparently Emacs will trick you into thinking you've changed the epa-gpg-program variable, but it won't actually honor that change when it runs a gpg call. This: https://blogs.fsfe.org/jens.lechtenboerger/2017/04/12/gnu-emacs-under-qubes-os/ Supposedly I should be able to use the following to make Emacs recognize qubes-gpg-client-wrapper: (customize-set-variable 'epg-gpg-program "/usr/bin/qubes-gpg-client-wrapper") But even though I'm running 25.3.1, it didn't work. I had to fall back to a second option: (require 'epg-config) (customize-set-variable 'epg-gpg-program "/usr/bin/qubes-gpg-client-wrapper") (push (cons 'OpenPGP (epg-config--make-gpg-configuration epg-gpg-program)) epg--configurations) This did the trick and actually got Emacs to recognize the changed variable. I can now send email using emacs/mu4e and Qubes split gpg. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/c5d489a0-6826-4184-9744-0c9fd7616aca%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
