>
> Can you please comment on how it is possible, that
> "ConditionPathExists=/var/run/qubes-service/clocksync was not met" - and -
> ideally, how to resolve that issue.
>
That suggests that you do not have the clocksync service enabled.
Set it with `qvm-service --enable QUBE clocksync` or
On Wed, Jul 27, 2022 at 03:59:03PM -0700, Howard Chen wrote:
> Currently, I am configuring my NetworkIT qube firewall with the
> qvm-firewall command in dom0 terminal. However, when I entered this, it
> showed this following error:
>
> [Howard@dom0 ~]$ qvm-firewall NetworkIT add dsthost
On Tue, Jul 19, 2022 at 09:28:00AM -0700, Howard Chen wrote:
> Thanks, Unman. This will take me about 18 to 19 months to finish and
> publish if I have the right tools that I need and the codes probabilities
> for that to happen.
> On Tuesday, July 19, 2022 at 4:08:06 AM UTC-7
On Tue, Jul 19, 2022 at 01:26:13PM +0200, Qubes wrote:
> Qubes wrote:
> > 'unman' via qubes-users wrote:
> > > On Tue, Jul 19, 2022 at 08:41:40AM +0200, Qubes wrote:
> > > > The procedure to install KDE in 4.1 doesn't seem to work, is
> > > > that e
On Tue, Jul 19, 2022 at 11:49:04AM +0200, Qubes wrote:
> 'unman' via qubes-users wrote:
> > On Tue, Jul 19, 2022 at 08:41:40AM +0200, Qubes wrote:
> > > The procedure to install KDE in 4.1 doesn't seem to work, is that expected
> > > behavior?
> >
> > Yes,
On Mon, Jul 11, 2022 at 11:47:19AM -0700, Howard Chen wrote:
> I need help to build the qubes core agent tools for the new OS that called
> LinuxFX. Here is the story.
>
> I stumped across the YT for other Linux OS that functions similar to
> Windows. This OS that was introduced to me by a
On Tue, Jul 19, 2022 at 08:41:40AM +0200, Qubes wrote:
> The procedure to install KDE in 4.1 doesn't seem to work, is that expected
> behavior?
Yes, the group isn't present.
qubes-dom0-update kde-settings-qubes
--
You received this message because you are subscribed to the Google Groups
On Wed, Jul 13, 2022 at 05:28:01PM +0200, Qubes wrote:
> Hi
>
> I am trying to figure out the significance of the "Initial memory" setting
> of a VM. Does it make any difference? For example VM A and B. A is
> configured with 500 MB initial memory and 2000 MB Max memory. VM B is
> configured with
I am advised that the onion server is back online
unman
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.co
I am advised that there is a hardware fault, and the onion site is down.
We're working on it.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
On Mon, Jul 11, 2022 at 05:14:05AM -0700, MUT wrote:
> I want to try creating maybe a standalone VM that would mount a partition
> on my hard drive which has a seperate os installed on it as its root, and
> use that as a VM. Effectively that would let you use the second OS you have
> installed
On Tue, Jun 28, 2022 at 03:42:22AM +, Metatron wrote:
> On Mon, Jun 27, 2022 at 07:41:57PM -0700, Andrew David Wong wrote:
> > Dear Qubes Community,
> >
> > New Fedora 36 templates are now available for Qubes 4.1!
>
> Is anyone else having this problem:
> # sudo qubes-dom0-update
problem.
>
> With kind regards,
>
> Viktor
>
Hi Viktor
My vanilla debian-11 template *does* have
/etc/qubes-rpc/qubes.TemplateSearch.
That file is provided by qubes-core-agent-dom0-updates.
I currently have version 4.1.36-1
I suggest you make sure that you have that package insta
uld allow you to hold (some) older kernel
version while still allowing you to try updated kernels.
unman
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
pattern and repl will be fine.
A simpler (and lazier) formulation would use file.append:
{% for binddir in binddirs %}
configure '{{ binddir }}' to be persistent:
file.append:
- name: /rw/config/qubes-bind-dirs.d/50_user.conf
- text: "binds+=( '{{ binddir }}' )"
- m
You have to include a call to qvm-volume in your state file.
'qvm-volume extend QUBE:private 50G':
cmd.run
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
On Wed, Mar 09, 2022 at 11:20:53AM +, 'taran1s' via qubes-users wrote:
>
>
> taran1s:
> > I have an issue with Split GPG as well as with opening files in the
> > disposable VMs and with the qrexec in the guide How to use Monero
> > CLI/daemon with Qubes + Whonix too.
> >
> >
This sounds familiar.
I think that there was exactly the same issue raised in the Qubes Forum.
afaik that was resolved to feedback, and not to intra-qubes bleeding.
I'll check, (or you can), and update.
--
You received this message because you are subscribed to the Google Groups
"qubes-users"
HVMs you can, in some cases, install qubes packages,
and then use tools like qvm-copy. I say, in some cases, because this
wont work with some targets, like Ubuntu standalones.
unman
--
You received this message because you are subscribed to the Google Groups
"qubes-users"
On Tue, Jan 18, 2022 at 02:09:30PM +0100, 'Rune Philosof' via qubes-users wrote:
> On Tue, Jan 18, 2022 at 1:24 PM 'awokd' via qubes-users <
> qubes-users@googlegroups.com> wrote:
>
> > 'Rune Philosof' via qubes-users:
> > > Why not use fedora 35 for dom0?
> > > Wouldn't it make it easier to
On Tue, Dec 21, 2021 at 08:01:43PM +0100, r.wiesb...@web.de wrote:
> it seems like the docs don't answer that, do they?
>
> https://www.qubes-os.org/doc/how-to-update/
>
[quote]
There is only a global setting for dom0 Updates, but how does it work
for other qubes?
[/quote]
Individual templates
at templates are using a proxy
> for outbound connections which salt is not able to use for retrieving keys?
> Btw. none of the options works: keyid + keyserver nor gpgkey. I just added
> both of the in the salt snipped.
>
> Thanks! P.
>
It is connected - you can find the s
On Sun, Nov 07, 2021 at 04:07:13AM -0800, Viktor Ransmayr wrote:
> I've installed Whonix 16 on my Qubes OS R4.0 system - and - have switched
> 'sys-whonix' to 'whonix-gw-16' as well as 'anon-whonix' to 'whonix-ws-16'.
>
> Everything seems to work fine - but - Qubes Updater reports that updates
On Sat, Nov 06, 2021 at 04:34:02PM +, lik...@gmx.de wrote:
> On 11/6/21 16:23, badgateway wrote:
> > Is it an option to clone your current template and disable the services
> > permanently in your new template?
> >
>
> It is an option. But in this case I'd prefer the way using
>
On Wed, Nov 03, 2021 at 05:29:33AM -0300, Franz wrote:
> On Wed, Nov 3, 2021 at 2:18 AM Andrew David Wong wrote:
>
> > On 11/2/21 6:14 PM, Franz wrote:
> > > Hello
> > > the documented way to start a disposable from dom0 is:
> > >
> > > $ qvm-run --dispvm= --service qubes.StartApp+firefox
> > >
On Wed, Oct 13, 2021 at 06:38:19PM +0200, haaber wrote:
> > Unman wrote:
> > qubes-input-proxy-sender is installed by default in the debian-11
> > template.
> > If you are using a minimal template, this is meant for advanced users,
> > but in any case, installati
On Wed, Oct 13, 2021 at 10:24:46AM +, 'taran1s' via qubes-users wrote:
> I am thinking about upgrading my Nitropad X230 Qubes to 4.1, but I am
> curious if the version 4.1 has some serious issues that would make the
> experience worse than the current 4.0 or would need many tweaks to make the
On Mon, Oct 11, 2021 at 09:55:47PM +0200, 799 wrote:
> Hello,
>
> I have setup Qubes 4.1 on my Surface and now I am running into issues
> trying to install more templates.
> sys-net is set as Dom0 Update VM and I am also able to search for packages
> and they get listed correctly.
>
> [user@dom0
On Wed, Oct 06, 2021 at 10:48:14PM +0200, 'qtpie' via qubes-users wrote:
> Installing qubes-input-proxy-sender in the template it was. Problem solved.
> Thanks awokd!
>
> Note: to avoid this problem, these should either be default installed
> packages in all templates, or be documented in
>
On Fri, Oct 01, 2021 at 07:20:16AM -0700, load...@gmail.com wrote:
> *$ sudo apt-get update*
> Get:1 http://ftp.debian.org/debian buster-backports InRelease [46.7 kB]
> Hit:2 https://contrib.qubes-os.org/deb/r4.0/vm buster InRelease
>
> Hit:3 https://deb.qubes-os.org/r4.0/vm
- https://qubes.3isec.org,
here on the list, https://github.com/unman/unman
maybe another key server over Tor.
You should do something like this, in a Fedora disposable - make sure
you have enough space in the qube you use to download.
Download the template you want from https://qubes.3isec.org
On Mon, Sep 27, 2021 at 06:36:16AM -0700, mgla...@gmail.com wrote:
>
> Yes, there are custom firewall rules, but the firewall is set to "Allow
> all outgoing internet connections". Which should ignore all the rules?
>
AFAIK, if you set custom firewall rules, they override the GUI firewall
On Mon, Sep 27, 2021 at 02:35:34AM -0700, mgla...@gmail.com wrote:
>
> Hi everyone,
>
> I'm looking for some help as to how to diagnose some app-VM networking
> issues. I have 2 vms, both based on the same template with identical
> config, but one can reach the internet and the other cannot.
>
nt.)
> > If you use the stock templates, then you can customise them simply
> > enough by adjusting the build parameters, and packages, in (e.g.)
> > builder-debian.
> >
>
> Thank you, awokd and unman. So I cannot just take the std installer,
> unpack the iso, add/
On Sun, Sep 19, 2021 at 07:51:02PM +, 'awokd' via qubes-users wrote:
> Bernhard:
> > Dear qubes-community,
> >
> > I would like to modify the qubes-iso (add a different kernel, maybe add
> > a wireless driver). Did someone here solve that already? A brief google
> > on the subject reveals
On Sun, Sep 12, 2021 at 02:35:25PM +0300, Mustafa Kuscu wrote:
> Hi,
>
> I have recently updated my system which apparently broke global clipboard
> functionality.
>
> After reading the docs, I have checked the log file at
> /var/log/qubes/guid.domain_id.log which adds this line whenever ctrl +
On Wed, Sep 08, 2021 at 09:00:17PM +0400, Vitali Andrusevich wrote:
> Small update:
>
> Upgraded Debian Template From Debian-10 to Debian-11.
> It didn't help unfortunately. Problem persists.
>
> BTW, USB attachment to VM running Fedora-32 Template still works without any
> problems.
>
>
On Thu, Sep 02, 2021 at 08:46:38PM +, 'awokd' via qubes-users wrote:
> ludwig...@gmail.com:
> > Hi all,
> > I would like to patch some sources of xen and would like to know how
> > to introduce the patches into the build system.
>
> There is a patch directory somewhere in the build
On Tue, Aug 31, 2021 at 07:38:33AM +0800, rss+qu...@armor-mail.com wrote:
> Hi unman,
>
> > I cant help with the AUR.
> > I build Arch packages for 4.0 and 4.1, and update them probably twice
> > a month ( other constraints permitting)
>
> Thanks very much fo
ally, if no one is working this I need to move on from Arch)
>
> TIA.
>
I cant help with the AUR.
I build Arch packages for 4.0 and 4.1, and update them probably twice a
month ( other constraints permitting)
You can pick up templates and packages at https://qubes.3isec.org
unman
--
On Wed, Aug 18, 2021 at 03:36:10AM +0200, Trust me I am a Doctor wrote:
>
> unman writes:
>
> >> Because whonix ensure updates comes from the tor network. I didn't
> >> figured yet if it is desirable to search to do something here.
> >>
> >
> >
On Thu, Aug 05, 2021 at 07:42:49AM +0200, 'Ing Gianluca Cavallo' via
qubes-users wrote:
> I'm a completely newbie qubes os user and I have this issue to solve and
> maybe for you is too simple because you know what qubes is.
> I created a StandaloneVM that means that it doesn't communicate with
On Sun, Aug 15, 2021 at 10:24:39PM +0200, Trust me I am a Doctor wrote:
>
> Hi,
>
> Processing to set up again qubes-gpg-split in my vms, qubes v4.0, I
> assume I have to install the package qubes-gpg-split to have the command
> qubes-gpg-client in the client and server VM.
>
> My client
On Wed, Jul 28, 2021 at 10:18:45PM +0200, Trust me I am a Doctor wrote:
>
> unman writes:
>
> > The repository was unavailable for a while. Was that the issue?
>
> Yes. I panicked.
>
> > Yes, apt-cacher-ng works for Fedora updates.
>
> Thanks for the deta
On Mon, Jul 26, 2021 at 08:09:52AM +, Michael Singer wrote:
> On Thu, Jul 17, 2021 at 12:29PM +0700, unman wrote> On Thu, Jul 15, 2021 at
> 06:07:59PM +, Michael Singer wrote:
> >> On Thu, Jul 15, 2021 at 04:50:29PM +0700, unman wrote:
> >>
> >>> O
On Thu, Jul 29, 2021 at 11:10:54PM -0700, Andrew David Wong wrote:
> On 7/29/21 9:05 AM, Yethal wrote:
> > Does running automated tests on own hardware count as being part of testing
> > team? I have some spare machines I can dedicate to that
> >
>
> Thanks! That's a good question. I'm not
On Wed, Jul 21, 2021 at 12:28:22PM +, Stumpy wrote:
> I prefer to us a vpn proxy when possible so most of my appvms are setup to
> use a vpn proxy vm. The problem is a few of my appvms need access to my home
> server on my LAN but so far I cant seem to figure out how to access my
> server on
dn´t even have apt-transport-tor installed in debian templates, but
> installing it does not add the v3 onions.
>
> On Tuesday, July 6, 2021 at 4:18:24 PM UTC+2 taran1s wrote:
>
> >
> >
> > unman:
> > > On Tue, Jul 06, 2021 at 10:00:23AM +, 'taran1s'
On Thu, Jul 15, 2021 at 06:07:59PM +, Michael Singer wrote:
> On Thu, Jul 15, 2021 at 04:50:29PM +0700, unman wrote:
>
> > On Wed, Jul 14, 2021 at 04:35:42PM +, Michael Singer wrote:
>
> >>
> >> Would you let my Qube, which is supposed
On Wed, Jul 14, 2021 at 04:35:42PM +, Michael Singer wrote:
> > On Wed, Jul 14, 2021 at 04:40:29, unman wrote:
>
> > Disable all unnecessary services in the qube - that means almost all of
> > them.
>
> Where would you look for such services?
Look to see what's r
On Mon, Jul 12, 2021 at 11:02:51AM +, Michael Singer wrote:
> Dear Qubes community,
>
> i am interested in your ideas on how you would set up a Qube as secure as
> possible to connect to a single ordinary internet site (not a VPN network)
> accessed directly via its IP address.
>
> My
On Sun, Jul 11, 2021 at 01:13:04AM -0700, Viktor Ransmayr wrote:
> Hello unman,
>
> unman schrieb am Samstag, 10. Juli 2021 um 16:57:43 UTC+2:
>
> > Looks good to me
> >
>
> Can you please elaborate a bit more! - What were you looking for?
I was looking for a p
Looks good to me
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit
On Fri, Jul 09, 2021 at 12:22:29PM -0700, Viktor Ransmayr wrote:
> Viktor Ransmayr schrieb am Donnerstag, 8. Juli 2021 um 23:11:33 UTC+2
>
> > Am Do., 8. Juli 2021 um 22:05 Uhr schrieb Mike Keehan :
> >
> >> On 7/8/21 7:27 PM, Viktor Ransmayr wrote:
> >> > Hello Qubes Community,
> >> >
> >> > I
On Tue, Jul 06, 2021 at 10:00:23AM +, 'taran1s' via qubes-users wrote:
> I have my debian based templates updating repos onionized through existing
> v2 onions. Tor Project announced that it will deprecate the v2 onions. Are
> there any alternative debian v3 onions for debian updates?
>
The
gt; DOM0 configuration failed, not working
>
> Any idea what went wrong?
>
> 799
>
By default, qubesctl will act on dom0.
You've referenced a state, but need to apply it.
sudo qubesctl --show-output --skip-dom0 --targets fedora-32 state.apply
update.qubes-vm
I have a basic
On Mon, Jun 21, 2021 at 11:22:01PM -0300, Franz wrote:
> >
> Other strange things happened:
> To restore a backup I connected an external USB disk with the backup to the
> second USB qube and under the restore command I clicked on the external USB
> disk to mount it. When I did that, a black
On Sat, Jun 26, 2021 at 04:22:54AM -0700, Ashtarsheran wrote:
> Another thing, I did try increasing memory as per the Troubleshooting doc
> on this template ; but this didn't solve anything in my case :/
>
> On Saturday, 26 June 2021 at 13:20:39 UTC+2 Ashtarsheran wrote:
>
> >
> > Hi all,
> >
The if clause is to exclude dom0 windows, but you could adapt that if
you *do* want action in dom0.
unman
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
On Tue, Jun 22, 2021 at 10:29:54AM +0100, River~~ wrote:
> Hi all,
>
> I noticed the new "alpha" level isos in the downloads and feel
> motivated to help testing it.
>
> I obviously do not want to go over to alpha for my normal work, but
> would be interested if I can install it alongside my
On Mon, Jun 21, 2021 at 08:57:07AM -0400, Haisam Khalil wrote:
> On Mon, Jun 21, 2021 at 6:52 AM unman wrote:
>
> > On Sun, Jun 20, 2021 at 09:14:47AM -0700, Chrome wrote:
> > >
> > > Doesn't matter because I give up on this approach or the debian
> > a
On Mon, Jun 21, 2021 at 11:53:17AM +, Stumpy wrote:
> On 2021-06-18 03:15, Sven Semmler wrote:
> > On 6/17/21 8:59 AM, Stumpy wrote:
> > > I guess I will just grin and bear it as its not crucial, I was just
> > > hoping the fix might be simple like Sven's suggestion (thanks for
> > > the
On Sun, Jun 20, 2021 at 09:14:47AM -0700, Chrome wrote:
>
> Doesn't matter because I give up on this approach or the debian approach. I
> nuked the fedora 32 minimal template and will give it a fresh start. I can
> tell you for sure I followed your instructions and the documentation and
> got
On Sun, Jun 20, 2021 at 08:29:14AM -0700, Chrome wrote:
>
> > I've tried with a Fedora-33-minimal base for the builder (I usually use
> > Debian), and the Archlinux template builds fine.
> > As I said, there are two problems : first, you're just not building all
> > the required packages. I
On Thu, Jun 17, 2021 at 05:22:57AM -0700, Chrome wrote:
>
>
> On Thursday, June 17, 2021 at 8:03:36 AM UTC-4 unman wrote:
>
> > On Wed, Jun 16, 2021 at 10:02:34AM -0700, Chrome wrote:
> > > qubes downloading...
> > > error: failed retrieving file 'qube
On Thu, Jun 17, 2021 at 01:59:23PM +, Stumpy wrote:
> Anyway, I am not at a level that I can do particuarly deep poking and
> figuring out such things, though the community has been a great resource in
> helping me improve my "qubes/linux kungu". I do remember getting this popup
> before (like
On Wed, Jun 16, 2021 at 10:02:34AM -0700, Chrome wrote:
> qubes downloading...
> error: failed retrieving file 'qubes.db' from disk : Couldn't open file
> /tmp/qubes-packages-mirror-repo/pkgs/qubes.db
> error: failed to synchronize all databases (download library error)
>
>
Strange - as I
On Thu, Jun 17, 2021 at 10:55:46AM +, Stumpy wrote:
>
>
> On 2021-06-17 07:42, Sven Semmler wrote:
> > Do you have a notification daemon installed? If unsure, install and
> > run dunst and see if it works then.
>
> Thanks. I pretty much installed the packages listed as being needed for
>
On Tue, Jun 15, 2021 at 06:31:37AM -0700, Chrome wrote:
>
>
> On Tuesday, June 15, 2021 at 8:00:17 AM UTC-4 unman wrote:
>
> > I'm not familiar with the document you are referring to.
> > I regularly build the Arch templates, and dont recognise these errors.
> >
I'm not familiar with the document you are referring to.
I regularly build the Arch templates, and dont recognise these errors.
It looks as if a) you haven't built some of the packages, and b) the
package database isn't being attached to the template.
Are you using the setup script?
The Arch
On Sat, Jun 12, 2021 at 09:26:11AM -0700, Chrome wrote:
> https://github.com/Qubes-Community/Contents/blob/master/docs/os/pentesting/kali.md
>
> Currently at step 9 of creating a usable kali VM when I saw the following
> terminal text. Did something qubes related get removed from the template
>
Very sorry to hear of your problems.
Equally happy to help you (as far as I can) with resolving these issues,
so if you do want to keep working on this, let the list know how it
goes, and we will provide whatever help we can.
--
You received this message because you are subscribed to the Google
On Sat, Jun 12, 2021 at 08:23:48AM -0300, Franz wrote:
> >
> >> take a look to the `qvm-pci` man page, it explains how to detach.
> >>
> >>
> >>
> > Many thanks it worked perfectly
> >
>
> It worked perfectly for a week or so, then the mouse stopped working.
> Thomas at Vikings, who built the D8
On Thu, Jun 10, 2021 at 09:45:59PM +, Stumpy wrote:
>
>
> I tried installing snaps in a debian template and then
>
> but while it ran fine the first time, after restarting it stopped
> working. As I wanted to be sure it was not a qubes issue I posted on the
> snapcraft forum [1] and the
On Wed, Jun 09, 2021 at 05:07:58PM +0200, haaber wrote:
> Hello,
>
> you someone remind me which qubes package contains the "notify-send"
> command? Thank you
>
Not Qubes package - libnotify
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To
On Tue, Jun 08, 2021 at 06:38:44AM -0700, Chrome wrote:
>
> Good Morning again,
>
> I got the OSINT VM about 95% setup. Thank you all for your help on it. I
> ran into problems during the install of a few recommended tools in the Mike
> Bazzell OSINT manual. These programs are as follows:
On Wed, Jun 02, 2021 at 09:03:46AM -0300, Franz wrote:
> Hello all,
>
> After standard installation using a PS2 keyboard, I should have two
> separate usb controllers in the same sys-usb qube. I would prefer to have
> two distinct sys-usb so using one more secure for the mouse (PS2 mouse does
>
On Wed, May 26, 2021 at 04:22:39PM +0200, Ulrich Windl wrote:
> Hi!
>
> I know that the issue is marked fixed already, but I wonder if there should
> have been some more popular notice for this surprising change in the update
> mechanism.
>
> Today I saw there (before installing updates):
>
On Wed, May 26, 2021 at 04:11:44PM +0200, Ulrich Windl wrote:
> On 5/14/21 3:22 PM, unman wrote:
> > On Fri, May 14, 2021 at 05:30:30AM -0700, load...@gmail.com wrote:
> > > On Wednesday, May 12, 2021 at 10:00:16 PM UTC+3 awokd wrote:
> > >
> > > > load...
On Tue, May 25, 2021 at 08:25:41PM +, pillule wrote:
>
> pillule writes:
>
> > Hi unman.
> >
> > I am learning to "salting my Qubes", what decided me is your recipe for
> > apt-cacher-ng (sometimes my bandwith really matters).
> >
> >
On Tue, May 25, 2021 at 07:05:40PM +, pillule wrote:
>
> Hi unman.
>
> I am learning to "salting my Qubes", what decided me is your recipe for
> apt-cacher-ng (sometimes my bandwith really matters).
>
> So far I get some things working such as an auto
On Mon, May 17, 2021 at 03:16:10PM +0200, haaber wrote:
> Hello, I followed a link in my mailVM-thunderbird, which configured to
> open links inside a new tempVM. When I reboot the parent mailVM, the
> child-disp-VM dies with it. This is not what I expected.
>
> Is it some wanted behaviour or a
I'm not familiar with that script but you **should** be able to rerun it
without harm.
(It should have been written to allow you to do this.)
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving
On Fri, May 14, 2021 at 03:55:50PM +0100, lik...@gmx.de wrote:
>
> > With salt? `qubesctl state.apply qvm.sys-firewall` should do it.
> >
> > But sys-firewall is just a qube with networking enabled, "provides-network"
> > set to True and
> > memory 500.
> >
>
> Ok, maybe there's another issue.
On Fri, May 14, 2021 at 03:02:59PM +0100, lik...@gmx.de wrote:
> Hi,
>
> in case I messed up my firewall qube:
>
> 1. What's the best way to re-create it with default settings?
> 2. Since 7 months saltstack states for sys-* were updated to support
> disposable sys-*:
>
On Fri, May 14, 2021 at 05:30:30AM -0700, load...@gmail.com wrote:
> On Wednesday, May 12, 2021 at 10:00:16 PM UTC+3 awokd wrote:
>
> > load...@gmail.com:
> > > On Monday, May 10, 2021 at 10:06:10 PM UTC+3 awokd wrote:
> >
> >
> > In dom0, check the files in /etc/yum.repos.d for the problem
On Wed, May 12, 2021 at 07:02:36PM +, 'awokd' via qubes-users wrote:
> unman:
>
> > Is it unusual to have more than one controller on a laptop? Venerable
> > old Thinkpads had 2 or 3, and you could easily keep one for dom0 and the
> > other(s) for sys-usb purposes.
&g
On Tue, May 11, 2021 at 11:47:50PM +0200, 'qtpie' via qubes-users wrote:
> I have a very annoying issue with DNS recently. I'm using the standard DNS
> device and servers provided by my internetprovider which runs a full
> dual-stack IPv4/6. Other non-qubes devices have no issues. I think this
>
On Mon, May 10, 2021 at 06:12:47PM +, 'awokd' via qubes-users wrote:
> 'Joanna Anders' via qubes-users:
> >
> > I'm trying to make Trezor Model T work on my Qubes system installed on a
> > ssd *usb drive* according to this guide https://wiki.trezor.io/Qubes_OS .
> > So by default the *sys-usb
On Sat, May 08, 2021 at 03:30:57AM -0700, Patrick wrote:
> Hi, I am trying to upgrade Fedora 30 to Fedora 33. I followed instructions
> here: https://www.qubes-os.org/doc/template/fedora/upgrade/
>
> The actual upgrade command shown there is:
> sudo dnf --releasever= distro-sync --best
On Sat, May 01, 2021 at 01:35:55PM -0700, TheGardner wrote:
> Thanks for the help, but a start of the template wouldn't help, cause the
> /QubesIncoming folder wasn't build there. It was build in a dvm-VM.
> But found a way now. You have to start the dvm-VM via Qubes Manager and
> have to start
On Tue, Apr 13, 2021 at 08:19:13AM +0200, Ulrich Windl wrote:
> Hi!
>
> I put the Qubes-R4.0.4 ISO on a memory card (it boots). However when I
> inspect the partitions, I'm quite surprised:
> # fdisk -l /dev/sdg
> Disk /dev/sdg: 7.4 GiB, 7969177600 bytes, 15564800 sectors
> Disk model: STORAGE
On Thu, Apr 08, 2021 at 01:25:57PM +, 'taran1s' via qubes-users wrote:
>
>
> unman:
> > On Wed, Apr 07, 2021 at 01:59:10PM +, 'taran1s' via qubes-users wrote:
> > > How do I use the X230+Qubes 4.0 with external monitor of at least 1080p or
> > > higher?
On Wed, Apr 07, 2021 at 01:59:10PM +, 'taran1s' via qubes-users wrote:
> How do I use the X230+Qubes 4.0 with external monitor of at least 1080p or
> higher? I understand that a dock station (Ultrabase?) is required to be able
> to use the HiDPI external monitor with X230.
>
> What smallest
On Tue, Apr 06, 2021 at 03:32:56PM +, 'taran1s' via qubes-users wrote:
>
>
> unman:
> > On Tue, Apr 06, 2021 at 12:44:31PM +, 'taran1s' via qubes-users wrote:
> > > I have got my X230 with Qubes preinstalled. Everything seems to work well,
> > > but I ca
On Tue, Apr 06, 2021 at 12:44:31PM +, 'taran1s' via qubes-users wrote:
> I have got my X230 with Qubes preinstalled. Everything seems to work well,
> but I cant switch-on the backlit keyboard. Pressing Fn+Space just cycles
> between ON and OFF of the upper light (besides camera). The X230 of
On Sun, Apr 04, 2021 at 03:01:52PM +0100, unman wrote:
> On Sat, Apr 03, 2021 at 10:45:59AM -0700, balin wrote:
> > I see. that seems straight forward then ... how time consuming is such a
> > move?
> >
> > Sincerely, Joh
> >
> > On Saturday, April
On Sat, Apr 03, 2021 at 10:45:59AM -0700, balin wrote:
> I see. that seems straight forward then ... how time consuming is such a
> move?
>
> Sincerely, Joh
>
> On Saturday, April 3, 2021 at 7:36:02 PM UTC+2 unman wrote:
>
> > On Sat, Apr 03, 2021 at 09:42:49AM -
On Sat, Apr 03, 2021 at 09:42:49AM -0700, balin wrote:
> Hi,
> I urgently need to backup (and version control) my by now relative
> elaborate salt config.
>
> The plan is to manage it in a `git` repo in a dedicated Vm (whether I push
> it to some private online repo still needs some
On Fri, Mar 26, 2021 at 09:39:39PM -0700, Andrew David Wong wrote:
> > So perhaps it may be more appropriate to add to the detached file also the
> > wording "use this file to follow the Qubes verification tutorial"
>
> Sure, if it's possible to include extra comment text that doesn't interfere
>
1 - 100 of 1725 matches
Mail list logo
