On Sun, Oct 14, 2018 at 04:54:05PM -0400, Alex Winter wrote:
> The laptop I have is a MSI WT70 20K. I have 5 USB ports total on it. Three
> USB3 ports and two USB2 ports.
>
> I have tryed making a sys-usb from the default settings and it crashes the
> install(probably because qubes is installed
The laptop I have is a MSI WT70 20K. I have 5 USB ports total on it. Three
USB3 ports and two USB2 ports.
I have tryed making a sys-usb from the default settings and it crashes the
install(probably because qubes is installed on a usb and its grabbing all
the USB controllers). Installing
On Mon, Oct 08, 2018 at 07:27:23PM -0700, Alex Winter wrote:
> Here are the usb controllers when I type in 'sudo lspci -v'
>
> 00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family
> USb xHCI (Rev 05) (prog-if 30 [XHCI])
> Subsystem: Micro-Star International Co., Ltd.
Here are the usb controllers when I type in 'sudo lspci -v'
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family
USb xHCI (Rev 05) (prog-if 30 [XHCI])
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 10ec
Flags: bus master, medium devsel, latency 0, IRQ 57
On Sun, Oct 07, 2018 at 06:31:04PM -0700, alexw8...@gmail.com wrote:
> Hello, I have qubes (r4.0) installed on a USB. I have 3 USB Controllers on
> my laptop. When I am running qubes and try attaching a USB device, it
> always uses the same USB Controller(the usb qubes is installed/dom0)
>
Hello, I have qubes (r4.0) installed on a USB. I have 3 USB Controllers on my
laptop. When I am running qubes and try attaching a USB device, it always
uses the same USB Controller(the usb qubes is installed/dom0) regardless of the
USB port I am using.
Is there a way to switch this? I
