Re: [qubes-users] [3.2rc1] Installer boot error '/dev/root' does not exist
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 On Sun, Jul 24, 2016 at 07:51:01PM -0700, raahe...@gmail.com wrote: > On Sunday, July 3, 2016 at 3:03:32 PM UTC-4, matteo@gmail.com wrote: > > i'm having this problem too, and i don't know how to disable alua > > > > [ 8.319 ] dracut-pre-trigger[547]: cat /tmp/dd_disk: No such file or > > directory > > [ OK ] Started Show Plymouth Boot Screen. > > [ OK ] Reached target Paths. > > [ OK ] Reached target Basic System. > > BLOCKS HERE > > [ 14.014 ] sd 7:0:0:0:0: alua: Attach failed (-22) > > [ 14.016 ] sd 7:0:0:0:0: [sdf] Asking for cache data failed > > [ 14.016 ] sd 7:0:0:0:0: [sdf] Assuming drive cache: write through > > If i boot in "basic graphic mode" additional 3 lines are displayed and > > again blocked. > > this happens on two computers > > if i press tab and at the and i add blacklist alua line nothing change (not > > sure is the right way to do it) > > i'd like to use new qubes os release but can't install it right now > > ^ I have this exact problem trying to install 3.2 rc1 iso. [ 8.319 ] > dracut-pre-trigger[547]: cat /tmp/dd_disk: No such file or directory R3.2-rc2 is planned for this week and it will contains patch for this problem. - -- Best Regards, Marek Marczykowski-Górecki Invisible Things Lab A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? -BEGIN PGP SIGNATURE- Version: GnuPG v2 iQEcBAEBCAAGBQJXldu4AAoJENuP0xzK19csT9sH/2CNbJMTrZHiMr9dQX6B+kOK 0oHW3v7+XU3zmQFBBRV0nbOpBplfPCYstWy69bFzQAlqerVhWTLynlS+2ZLFLCML YiOd5lPUY+cXQ2fg0h8aKeE+2yGEkFieWxnGxgBbWyo+lc/vuoIoGIMV9QHdIALk fop95ZIPKx7FzjHcAqylAatlAV1rdrxmkbpfB3P1tkkEP0cxyKAJcL0ll2op73fp ICJsDIcxjwtuxWEl7IM6cNbPopQADbO8rZpp7h5gTCZiBRy84rcyrdCVVZGE60fn 2A8e0VJJyddsal3Ku5HKDf6+VtiWWn95LSrCZ8rtcwQp2aBuUMyrXrFDL25taBA= =L1mv -END PGP SIGNATURE- -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/20160725092821.GN5036%40mail-itl. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] [3.2rc1] Installer boot error '/dev/root' does not exist
On Sunday, July 3, 2016 at 3:03:32 PM UTC-4, matteo@gmail.com wrote: > i'm having this problem too, and i don't know how to disable alua > > [ 8.319 ] dracut-pre-trigger[547]: cat /tmp/dd_disk: No such file or directory > [ OK ] Started Show Plymouth Boot Screen. > [ OK ] Reached target Paths. > [ OK ] Reached target Basic System. > BLOCKS HERE > [ 14.014 ] sd 7:0:0:0:0: alua: Attach failed (-22) > [ 14.016 ] sd 7:0:0:0:0: [sdf] Asking for cache data failed > [ 14.016 ] sd 7:0:0:0:0: [sdf] Assuming drive cache: write through > If i boot in "basic graphic mode" additional 3 lines are displayed and again > blocked. > this happens on two computers > if i press tab and at the and i add blacklist alua line nothing change (not > sure is the right way to do it) > i'd like to use new qubes os release but can't install it right now ^ I have this exact problem trying to install 3.2 rc1 iso. [ 8.319 ] dracut-pre-trigger[547]: cat /tmp/dd_disk: No such file or directory -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/87536836-7a88-4a53-a9e1-4ddf11b9e270%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] [3.2rc1] Installer boot error '/dev/root' does not exist
i'm having this problem too, and i don't know how to disable alua [ 8.319 ] dracut-pre-trigger[547]: cat /tmp/dd_disk: No such file or directory [ OK ] Started Show Plymouth Boot Screen. [ OK ] Reached target Paths. [ OK ] Reached target Basic System. BLOCKS HERE [ 14.014 ] sd 7:0:0:0:0: alua: Attach failed (-22) [ 14.016 ] sd 7:0:0:0:0: [sdf] Asking for cache data failed [ 14.016 ] sd 7:0:0:0:0: [sdf] Assuming drive cache: write through If i boot in "basic graphic mode" additional 3 lines are displayed and again blocked. this happens on two computers if i press tab and at the and i add blacklist alua line nothing change (not sure is the right way to do it) i'd like to use new qubes os release but can't install it right now -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/493805ba-efd0-4b34-a607-697695ff3761%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] [3.2rc1] Installer boot error '/dev/root' does not exist
On Sunday, June 26, 2016 at 12:50:52 PM UTC+2, Marek Marczykowski-Górecki wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA256 > > On Sun, Jun 26, 2016 at 06:45:50AM -0400, Chris Laprise wrote: > > More info, Marek... > > > > When I try to scan the /dev/sdb device with partx, it says the device is not > > readable or not valid device. > > > > When I plug in another USB stick, the partitions are enumerated as /dev/sdc1 > > etc. but they cannot be mounted (devices are unreadable). > > > > From dmesg, these errors occur right before the /dev/root error and > > stoppage: > > > > scsi 6:0:0:0: Direct-AccessSamsung Flash Drive1100 PQ: 0 ANSI: 6 > > sd 6:0:0:0: alua: supports implicit and explicit TPGS > > sd 6:0:0:0: alua: No target port descriptors found > > sd 6:0:0:0: alua: Attach failed (-22) > > sd 6:0:0:0: Failed to add device handler: -22 > > sd 6:0:0:0: [sdb] ...several lines with drive size and flags... > > (trace dump occurs) > > > > This thread says disabling 'alua' module (scsi_dh_alua?) can resolve the > > issue: > > https://www.linuxquestions.org/questions/linux-hardware-18/corsair-flash-voyager-slider-usb-memory-stick-fails-to-attach-4175572901/ > > > > Should 'alua' even be present? AFAIK it is for large infrastructure. Fedora > > installer does not seem to enable it by default. > > Indeed looks like something unnecessary on desktop system. > Try adding this to kernel command line: > > rd.driver.blacklist=scsi_dh_alua > > - -- > Best Regards, > Marek Marczykowski-Górecki > Invisible Things Lab > A: Because it messes up the order in which people normally read text. > Q: Why is top-posting such a bad thing? > -BEGIN PGP SIGNATURE- > Version: GnuPG v2 > > iQEcBAEBCAAGBQJXb7OEAAoJENuP0xzK19csmkcH+QG0fPrTWpyO28RywNYMB9EW > az/7wSFS6zE5vzy3A7c2wHWNmS/51V8KsI0CfexCBOXBsghzqyGp3ZvFuzcdoPHc > QsG7Ut17HcNOtEiPHj4GkKLb6+KTYVVfWPCUgwQqhdE6SCcU65/5ofTBlvOLvv72 > GfhkC+XvBFDSByRkKV28rxS2AAVRqeLfnE3GRpe8QSZ8MXtwSXBD05YEGq8k0MGH > GYt4mWrcnS45kTfkZkguL3KwPmrzSoh5QnNBG4+633aKPUpgZKcyFtAIF6OKlgZT > Zu6LQ6oSMp5n/vJIVdXC1mM55RJ2dE61NnuqWV01mzTwTP4jWkXM+dlcDuCnAtM= > =+PXY > -END PGP SIGNATURE- I am having the same problem. I am trying to apply this boot option, and test if it works. But, how do you do it? Sorry this question might be too basic. Editing the boot command in Grub shows "...placeholder qubes-verbose" and there options are not accepted. I don't see any way of editing "qubes-verbose" inside grub command line. I have been googling around and reading Grub documentation and there is no trace of such functionality. Also mounting and editing the file on the USB seems not possible because it is a read only ISO filesystem. Surely many qubes users will have to tune a boot parameter at installation time. so, there must be a simple way to do this. I fear I might have to build a patched ISO for this. Surely there must be something I am missing. how can I test this easily? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/48f2603a-4a6a-4760-9266-e83a9054d55a%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] [3.2rc1] Installer boot error '/dev/root' does not exist
On 06/26/2016 06:50 AM, Marek Marczykowski-Górecki wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA256 On Sun, Jun 26, 2016 at 06:45:50AM -0400, Chris Laprise wrote: More info, Marek... When I try to scan the /dev/sdb device with partx, it says the device is not readable or not valid device. When I plug in another USB stick, the partitions are enumerated as /dev/sdc1 etc. but they cannot be mounted (devices are unreadable). From dmesg, these errors occur right before the /dev/root error and stoppage: scsi 6:0:0:0: Direct-AccessSamsung Flash Drive1100 PQ: 0 ANSI: 6 sd 6:0:0:0: alua: supports implicit and explicit TPGS sd 6:0:0:0: alua: No target port descriptors found sd 6:0:0:0: alua: Attach failed (-22) sd 6:0:0:0: Failed to add device handler: -22 sd 6:0:0:0: [sdb] ...several lines with drive size and flags... (trace dump occurs) This thread says disabling 'alua' module (scsi_dh_alua?) can resolve the issue: https://www.linuxquestions.org/questions/linux-hardware-18/corsair-flash-voyager-slider-usb-memory-stick-fails-to-attach-4175572901/ Should 'alua' even be present? AFAIK it is for large infrastructure. Fedora installer does not seem to enable it by default. Indeed looks like something unnecessary on desktop system. Try adding this to kernel command line: rd.driver.blacklist=scsi_dh_alua This didn't work. Is that module compiled as integral to the kernel? I was able to rmmod scsi_dh_alua in the CLI, and this allowed newly attached drives to be accessed. But I could not get the boot process to continue. The bugzilla issue points to a patch against scsi_sysfs.c but it shouldn't be necessary if the alua module is excluded. Chris -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/bfa2b50a-d768-da64-c7e7-902a2751fb9a%40openmailbox.org. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] [3.2rc1] Installer boot error '/dev/root' does not exist
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 On Sun, Jun 26, 2016 at 06:45:50AM -0400, Chris Laprise wrote: > More info, Marek... > > When I try to scan the /dev/sdb device with partx, it says the device is not > readable or not valid device. > > When I plug in another USB stick, the partitions are enumerated as /dev/sdc1 > etc. but they cannot be mounted (devices are unreadable). > > From dmesg, these errors occur right before the /dev/root error and > stoppage: > > scsi 6:0:0:0: Direct-AccessSamsung Flash Drive1100 PQ: 0 ANSI: 6 > sd 6:0:0:0: alua: supports implicit and explicit TPGS > sd 6:0:0:0: alua: No target port descriptors found > sd 6:0:0:0: alua: Attach failed (-22) > sd 6:0:0:0: Failed to add device handler: -22 > sd 6:0:0:0: [sdb] ...several lines with drive size and flags... > (trace dump occurs) > > This thread says disabling 'alua' module (scsi_dh_alua?) can resolve the > issue: > https://www.linuxquestions.org/questions/linux-hardware-18/corsair-flash-voyager-slider-usb-memory-stick-fails-to-attach-4175572901/ > > Should 'alua' even be present? AFAIK it is for large infrastructure. Fedora > installer does not seem to enable it by default. Indeed looks like something unnecessary on desktop system. Try adding this to kernel command line: rd.driver.blacklist=scsi_dh_alua - -- Best Regards, Marek Marczykowski-Górecki Invisible Things Lab A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? -BEGIN PGP SIGNATURE- Version: GnuPG v2 iQEcBAEBCAAGBQJXb7OEAAoJENuP0xzK19csmkcH+QG0fPrTWpyO28RywNYMB9EW az/7wSFS6zE5vzy3A7c2wHWNmS/51V8KsI0CfexCBOXBsghzqyGp3ZvFuzcdoPHc QsG7Ut17HcNOtEiPHj4GkKLb6+KTYVVfWPCUgwQqhdE6SCcU65/5ofTBlvOLvv72 GfhkC+XvBFDSByRkKV28rxS2AAVRqeLfnE3GRpe8QSZ8MXtwSXBD05YEGq8k0MGH GYt4mWrcnS45kTfkZkguL3KwPmrzSoh5QnNBG4+633aKPUpgZKcyFtAIF6OKlgZT Zu6LQ6oSMp5n/vJIVdXC1mM55RJ2dE61NnuqWV01mzTwTP4jWkXM+dlcDuCnAtM= =+PXY -END PGP SIGNATURE- -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/20160626105043.GE1323%40mail-itl. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] [3.2rc1] Installer boot error '/dev/root' does not exist
On 06/25/2016 07:10 AM, Marek Marczykowski-Górecki wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA256 On Sat, Jun 25, 2016 at 05:21:27AM -0400, Chris Laprise wrote: On 06/24/2016 08:25 PM, Chris Laprise wrote: I've tried this on 2 USB sticks (a USB2 and USB3) and I'm not able to boot the new installer from either one. Apparently it can't find the filesystem it needs to transition from the initramfs root. The iso was verified with gpg and written to the drives with plain 'dd if=isoimage of=dev/sdb'. So I'm wondering if there is a simple fix to this or if I'll have to start digging through the rd log. Chris Looking in the rdsos log, I noticed the partitions of my internal drive were enumerated (sda1, sda2, etc), but not the partitions of the USB sticks--only sdb is shown. Check its label (`blkid`). And if it matches the one on kernel command line (/proc/cmdline). They are identical. However, the USB stick partitions still cannot be seen by the installer environment: /dev has an sdb but no partitions. I tried turning off USB3 mode in BIOS, but it had no effect. I also downloaded the fedora 23 live cd and the netinst images to try them out. They both boot up fine on USB sticks. What does work is booting from DVD. But then I have another problem where it won't see USB sticks as destinations at all. It doesn't matter if I plug them in before or after booting. So I cannot try out 3.2rc1 either /from/ or /to/ a USB drive. Chris Also, when I look at the USB sticks with fdisk it sees 2 partitions, but parted sees only one (32MB in size). Partition layout on installation media is intentionally somehow "non standard" (to support any installation type from the same image). So parted may display it that way. - -- Best Regards, Marek Marczykowski-Górecki Invisible Things Lab A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? -BEGIN PGP SIGNATURE- Version: GnuPG v2 iQEcBAEBCAAGBQJXbmaPAAoJENuP0xzK19csC9UH/2LnrA9DMG5cYTAef0Lb0mzg e2qe4vzW/YoNkzaXf9nYblpLLWgUDhzmykKoKb9xxwXAYFyt/4thJJlOtlBwswbh KlRb//IveLTTNxLZ+OhEHyJZ63d24dypK2qMV7NcLfvpba8StPLfkgfAlgFoJt7P V6IlgzbYE9f6WWMSpfNGlAXflkZ3Joo/PidmRy9RgEE8zPAphF7eYLaYo2kKv6cN MPkWc0Z748F5ARphnTqOehAjItwPz9sV4HSo0VHCLKsOpi1nuzjq/uo3k9+iURqA BRiWCB8GuF5Fouixrm6p/AtWKsDgG98lFCQeHVqueGMsTVgLemti1Nr80PyVRyk= =FdG0 -END PGP SIGNATURE- -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/65c3029b-3b5e-134d-71d6-2792427018fa%40openmailbox.org. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] [3.2rc1] Installer boot error '/dev/root' does not exist
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 On Sat, Jun 25, 2016 at 05:21:27AM -0400, Chris Laprise wrote: > > > On 06/24/2016 08:25 PM, Chris Laprise wrote: > > I've tried this on 2 USB sticks (a USB2 and USB3) and I'm not able to > > boot the new installer from either one. Apparently it can't find the > > filesystem it needs to transition from the initramfs root. > > > > The iso was verified with gpg and written to the drives with plain 'dd > > if=isoimage of=dev/sdb'. > > > > So I'm wondering if there is a simple fix to this or if I'll have to > > start digging through the rd log. > > > > Chris > > > > Looking in the rdsos log, I noticed the partitions of my internal drive were > enumerated (sda1, sda2, etc), but not the partitions of the USB sticks--only > sdb is shown. Check its label (`blkid`). And if it matches the one on kernel command line (/proc/cmdline). > Also, when I look at the USB sticks with fdisk it sees 2 partitions, but > parted sees only one (32MB in size). Partition layout on installation media is intentionally somehow "non standard" (to support any installation type from the same image). So parted may display it that way. - -- Best Regards, Marek Marczykowski-Górecki Invisible Things Lab A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? -BEGIN PGP SIGNATURE- Version: GnuPG v2 iQEcBAEBCAAGBQJXbmaPAAoJENuP0xzK19csC9UH/2LnrA9DMG5cYTAef0Lb0mzg e2qe4vzW/YoNkzaXf9nYblpLLWgUDhzmykKoKb9xxwXAYFyt/4thJJlOtlBwswbh KlRb//IveLTTNxLZ+OhEHyJZ63d24dypK2qMV7NcLfvpba8StPLfkgfAlgFoJt7P V6IlgzbYE9f6WWMSpfNGlAXflkZ3Joo/PidmRy9RgEE8zPAphF7eYLaYo2kKv6cN MPkWc0Z748F5ARphnTqOehAjItwPz9sV4HSo0VHCLKsOpi1nuzjq/uo3k9+iURqA BRiWCB8GuF5Fouixrm6p/AtWKsDgG98lFCQeHVqueGMsTVgLemti1Nr80PyVRyk= =FdG0 -END PGP SIGNATURE- -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/20160625111007.GS28824%40mail-itl. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] [3.2rc1] Installer boot error '/dev/root' does not exist
On 06/24/2016 08:25 PM, Chris Laprise wrote: I've tried this on 2 USB sticks (a USB2 and USB3) and I'm not able to boot the new installer from either one. Apparently it can't find the filesystem it needs to transition from the initramfs root. The iso was verified with gpg and written to the drives with plain 'dd if=isoimage of=dev/sdb'. So I'm wondering if there is a simple fix to this or if I'll have to start digging through the rd log. Chris Looking in the rdsos log, I noticed the partitions of my internal drive were enumerated (sda1, sda2, etc), but not the partitions of the USB sticks--only sdb is shown. Also, when I look at the USB sticks with fdisk it sees 2 partitions, but parted sees only one (32MB in size). Chris -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/0463f88a-3c2b-111c-5ad3-10cd58d44e26%40openmailbox.org. For more options, visit https://groups.google.com/d/optout.
