I'm trying to install from a USB that I setup with rufus, I verified the ISO too.
If I boot into the USB in uefi mode, I get some output at the top left of the screen then the screen goes blank. I did a successful install on a completely blank ssd by booting the usb in legacy mode. everything went fine but I there was no boot option for it. Also, I ended up with no xen.efi file, xen.cfg was empty, and I couldnt use efibootmgr, "efi variables not supported" is the error I would get. The only extra parameters I used were "nouveau.modeset=0 rd.driver.blacklist=nouveau video=vesa:off". The laptop I am using is a Dell G7 15 What can I do here? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/cfc27bc7-b0d1-480f-9037-db95f1bc69fc%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.