On 20190114 at 17:21 + 'awokd' via qubes-users wrote:
> Eric Duncan wrote on 1/13/19 9:08 PM:
>
> > I then spent several days trying to get Nvidia drivers loaded to no avail.
> > Also, trying to get just the Intel card working (hybrid graphics) but I've
> > hit a brick wall there - Xen
Eric Duncan wrote on 1/13/19 9:08 PM:
I then spent several days trying to get Nvidia drivers loaded to no avail.
Also, trying to get just the Intel card working (hybrid graphics) but I've hit
a brick wall there - Xen just freezes on the initial splash screen of the 4
lines showing what
On Sunday, January 13, 2019 at 10:51:14 AM UTC-5, awokd wrote:
> Weird, not sure how it can detect that 14.3 device with it supposedly
> disabled. Check sys-net's Qube Setting/Devices and remove 14.3 from the
> right if it's there. Leave 1f.6/Ethernet enabled and assigned if it's
> not causing
Eric Duncan wrote on 1/13/19 3:50 AM:
For the record, I am now using 4.0.1 since it released (same problems).
On Monday, January 7, 2019 at 12:49:52 AM UTC-5, awokd wrote:
Try temporarily disabling your wifi card for the install.
Good idea! I disabled it, along with just about every
For the record, I am now using 4.0.1 since it released (same problems).
On Monday, January 7, 2019 at 12:49:52 AM UTC-5, awokd wrote:
>
> Try temporarily disabling your wifi card for the install.
>
Good idea! I disabled it, along with just about every device I could find. It
generated a
See inlines.
On Friday, January 4, 2019 at 5:16:16 PM UTC-5, Achim Patzner wrote:
>
> The good old I219-LM problem... Before assigning (or after 8-) it to
> sys-net (I do not really see any reason it should be assigned to sys-
> firewall... are you sure?) it needs to get set to
Eric Duncan:
Latest 1.17 BIOS, VT-d and Virtualization enabled in BIOS. Various thunderbolt
assists disable/enable, etc options tried on/off. Must use discrete graphics
during install, which is an Nvidia Quatro P2000 (similar to the GTX 1050qm
generation).
Anaconda installer gets past the
Trying to install Qubes R4.0 and R4.0.1-rc2 and receiving the same install
error each time.
https://imgur.com/a/haBeVee
/usr/bin/qvm-start sys-firewall failed
stdout: ""
stderr: "Start failed: internal error: Unable to reset PCI device
:00:1f:6:
no FLR, PM reset or bus
On 20190104 at 09:24 -0800 Eric Duncan wrote:
> It is upon completion of this step, just before the system switches to the
> login screen, that the error message pops up:
>
> /usr/bin/qvm-start sys-firewall failed
> stdout: ""
> stderr: "Start failed: internal error: Unable to reset
Latest 1.17 BIOS, VT-d and Virtualization enabled in BIOS. Various thunderbolt
assists disable/enable, etc options tried on/off. Must use discrete graphics
during install, which is an Nvidia Quatro P2000 (similar to the GTX 1050qm
generation).
Anaconda installer gets past the initial setup,
10 matches
Mail list logo
