After days of troubleshooting, I've encountered a second problem. My first problem was that the installer would freeze after the [xen] characters start scrolling from the side, and before the green OKs start to appear. I've checked the troubleshooting page and commented out noexitboot and mapbs. Once I've done that, it was now able to successfully make it to the Qubes setup screen, where you have to choose the language, time, install location, and all that. The problem is, it would then freeze and crash while I'm setting up the install, usually at the beginning where I would choose a language, or select the drive to install Qubes. The same would also happen in a Legacy boot, except that I would un-comment noexitboot and mapbs, but the problem sill persists. I checked out the troubleshooting page again, but most fixes are only applicable after the install which I'm not even able to begin, except for the Nvidia troubleshooting, and because I'm using a Nvidia card, I decided to check it out. The problem is that it mentions making changes at the GRUB boot menu...I'm not entirely sure what that is. Just to make sure, I kept on pressing E, hoping that it might go into the GRUB editor as the troubleshooting page says, but nothing happened. So I kinda need help trying to troubleshoot this. I'm running a 64bit Windows 10 system running the latest version of Acer Nitro BIOS. The install medium is a 32gb SanDisk USB 2.0 if that helps.
-- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/a607adc8-f96b-4a1b-bd6c-abe89ca64e2fo%40googlegroups.com.
