Re: [qubes-users] mounting external encrypted (LUKS-debian8) hard drive ??
Bonjour Raahelps, Le samedi 28 janvier 2017 à 17:58:44, vous écriviez : > On Saturday, January 28, 2017 at 5:57:51 AM UTC-5, ThierryIT wrote: >> Sorry for all this noise >> I have mounted "xvdi5" with success. >> But: unknown filesystem type: LVM2_member >> >> Something to install on this vm ? >> >> Thx >> >> Le samedi 28 janvier 2017 12:54:07 UTC+2, ThierryIT a écrit : >> > > My mistake. >> > > I did it from "dom0" >> > > >> > dom0:sdb WD.698G (attached to vm-test as 'xvdi') >> > dom0:sdb5 WD690G >> > dom0:sdb1 ... >> > dom0:sdb2 >> > etc >> > >> > If I try to mount xvdi as LUKS: It is not a valid LUKS >> > I do think that the right partition to mount should be "sdb5" ... How to >> > mount "sdb5" ?? >> > >> > Thx >> > > >> > > Le samedi 28 janvier 2017 12:43:57 UTC+2, ThierryIT a écrit : >> > > > qvm-block command not found ... ?? >> > > > I am right to do it from my vm-test ? >> > > > >> > > > Thx >> > > > >> > > > Le samedi 28 janvier 2017 12:10:26 UTC+2, Andrew David Wong a écrit : >> > > > > -BEGIN PGP SIGNED MESSAGE- >> > > > > Hash: SHA512 >> > > > > >> > > > > On 2017-01-28 01:45, ThierryIT wrote: >> > > > > > Hi, >> > > > > > >> > > > > > I have installed with success Qubes 3.2 on my Lenovo W520. I ma >> > > > > > bit by bit playing with it. I would like to have access to my old >> > > > > > encrypted hard drive, still do remember the passphrase :) I have >> > > > > > build a new vm, let's call it "vm-test" I have attached the block >> > > > > > device to it, seems to be good ... But after ? How to mount it ?? >> > > > > > >> > > > > > Thx >> > > > > > >> > > > > >> > > > > It's probably mounted as /dev/xvdi (you can check with qvm-block). >> > > > > So, in vm-test, try something like: >> > > > > >> > > > > $ sudo cryptsetup open /dev/xvdi hdd >> > > > > >> > > > > $ sudo mount /dev/mapper/hdd /mnt/removable >> > > > > $ cd /mnt/removable >> > > > > $ ls >> > > > > >> > > > > - -- >> > > > > Andrew David Wong (Axon) >> > > > > Community Manager, Qubes OS >> > > > > https://www.qubes-os.org >> > > > > -BEGIN PGP SIGNATURE- >> > > > > >> > > > > iQIcBAEBCgAGBQJYjG4DAAoJENtN07w5UDAwQO0QAMPg3I4YoMMxMRcJSt6ds8/i >> > > > > qdTXOg5YrG9dglctSfK9FWdr066wdar/8k7R9DIyX/ndg8p9sfPXq8Gdlzw0KiEH >> > > > > G6kLAXVZN4qQ4fQYnMhZE6AhUlj6ZjsPA6+BUr4NyzoCyd0z0wfhyvm2ulR8VoUA >> > > > > /FiZOFYWQ2oFnJed4LUV3KgaT9TOo969zbZ306KsFUV6CqZw38My4B8qfqr0/qC4 >> > > > > RklCHG/D230AXAq9PtOY1wH/sCbNFR8wqnUoNIIT+qPxWtnXZFtcNZuqmiKiSDAB >> > > > > WdlnJEJ0ktDRT99RhrIcnTDLBXel/e0l9Y6YtV+spVPhPdPMRcppeyQzboAtPTfw >> > > > > UfA4wri5KuDROgJ5RpopkfyXyEJz7yWg8hQXyfqRKf+IDoIHxEyhYA8v0CDBjACT >> > > > > 3zu7SFn21ki9N94SV7wTL0ODQjVTNtrtlHB/jrs2/s0HVacxIxOm9DbuDdCAHNqO >> > > > > OAj+NjSNa2jcXlF1/l24hsEAabBVMUrPhtPeaw7WoTxkADv1KM5lNUS4mcYhwsPg >> > > > > BfLjtsTcaYKRQaxi26WcAzdem2kUhHG31RzSAEAuHXTC0S+aEJv3UgAf++Xhn/F2 >> > > > > nBgYV2hz5WlU6u5OdBLQppUXPEuwKhwp7Um5hUKHFN3+eYK9sPWbK2JpYc2i2lSs >> > > > > Qc4E/xMl/TLaJd1IHMfX >> > > > > =xkVz >> > > > > -END PGP SIGNATURE- > how did you encrypt the drive? I have an external encrypted drive > i use. I simply open it with any file manager which prompts me for > the encryption phrase. nautilus should work? I have not tried with Nautilus, but this is working for me. -- Cordialement, Thierrye-mail : lenai...@maelenn.org -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/953712293.20170129080356%40maelenn.org. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] mounting external encrypted (LUKS-debian8) hard drive ??
On Saturday, January 28, 2017 at 5:57:51 AM UTC-5, ThierryIT wrote: > Sorry for all this noise > I have mounted "xvdi5" with success. > But: unknown filesystem type: LVM2_member > > Something to install on this vm ? > > Thx > > Le samedi 28 janvier 2017 12:54:07 UTC+2, ThierryIT a écrit : > > > My mistake. > > > I did it from "dom0" > > > > > dom0:sdb WD.698G (attached to vm-test as 'xvdi') > > dom0:sdb5 WD690G > > dom0:sdb1 ... > > dom0:sdb2 > > etc > > > > If I try to mount xvdi as LUKS: It is not a valid LUKS > > I do think that the right partition to mount should be "sdb5" ... How to > > mount "sdb5" ?? > > > > Thx > > > > > > Le samedi 28 janvier 2017 12:43:57 UTC+2, ThierryIT a écrit : > > > > qvm-block command not found ... ?? > > > > I am right to do it from my vm-test ? > > > > > > > > Thx > > > > > > > > Le samedi 28 janvier 2017 12:10:26 UTC+2, Andrew David Wong a écrit : > > > > > -BEGIN PGP SIGNED MESSAGE- > > > > > Hash: SHA512 > > > > > > > > > > On 2017-01-28 01:45, ThierryIT wrote: > > > > > > Hi, > > > > > > > > > > > > I have installed with success Qubes 3.2 on my Lenovo W520. I ma > > > > > > bit by bit playing with it. I would like to have access to my old > > > > > > encrypted hard drive, still do remember the passphrase :) I have > > > > > > build a new vm, let's call it "vm-test" I have attached the block > > > > > > device to it, seems to be good ... But after ? How to mount it ?? > > > > > > > > > > > > Thx > > > > > > > > > > > > > > > > It's probably mounted as /dev/xvdi (you can check with qvm-block). > > > > > So, in vm-test, try something like: > > > > > > > > > > $ sudo cryptsetup open /dev/xvdi hdd > > > > > > > > > > $ sudo mount /dev/mapper/hdd /mnt/removable > > > > > $ cd /mnt/removable > > > > > $ ls > > > > > > > > > > - -- > > > > > Andrew David Wong (Axon) > > > > > Community Manager, Qubes OS > > > > > https://www.qubes-os.org > > > > > -BEGIN PGP SIGNATURE- > > > > > > > > > > iQIcBAEBCgAGBQJYjG4DAAoJENtN07w5UDAwQO0QAMPg3I4YoMMxMRcJSt6ds8/i > > > > > qdTXOg5YrG9dglctSfK9FWdr066wdar/8k7R9DIyX/ndg8p9sfPXq8Gdlzw0KiEH > > > > > G6kLAXVZN4qQ4fQYnMhZE6AhUlj6ZjsPA6+BUr4NyzoCyd0z0wfhyvm2ulR8VoUA > > > > > /FiZOFYWQ2oFnJed4LUV3KgaT9TOo969zbZ306KsFUV6CqZw38My4B8qfqr0/qC4 > > > > > RklCHG/D230AXAq9PtOY1wH/sCbNFR8wqnUoNIIT+qPxWtnXZFtcNZuqmiKiSDAB > > > > > WdlnJEJ0ktDRT99RhrIcnTDLBXel/e0l9Y6YtV+spVPhPdPMRcppeyQzboAtPTfw > > > > > UfA4wri5KuDROgJ5RpopkfyXyEJz7yWg8hQXyfqRKf+IDoIHxEyhYA8v0CDBjACT > > > > > 3zu7SFn21ki9N94SV7wTL0ODQjVTNtrtlHB/jrs2/s0HVacxIxOm9DbuDdCAHNqO > > > > > OAj+NjSNa2jcXlF1/l24hsEAabBVMUrPhtPeaw7WoTxkADv1KM5lNUS4mcYhwsPg > > > > > BfLjtsTcaYKRQaxi26WcAzdem2kUhHG31RzSAEAuHXTC0S+aEJv3UgAf++Xhn/F2 > > > > > nBgYV2hz5WlU6u5OdBLQppUXPEuwKhwp7Um5hUKHFN3+eYK9sPWbK2JpYc2i2lSs > > > > > Qc4E/xMl/TLaJd1IHMfX > > > > > =xkVz > > > > > -END PGP SIGNATURE- how did you encrypt the drive? I have an external encrypted drive i use. I simply open it with any file manager which prompts me for the encryption phrase. nautilus should work? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/62bfb877-1129-478e-8186-b92d074bb380%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] mounting external encrypted (LUKS-debian8) hard drive ??
Sorry for all this noise I have mounted "xvdi5" with success. But: unknown filesystem type: LVM2_member Something to install on this vm ? Thx Le samedi 28 janvier 2017 12:54:07 UTC+2, ThierryIT a écrit : > > My mistake. > > I did it from "dom0" > > > dom0:sdb WD.698G (attached to vm-test as 'xvdi') > dom0:sdb5 WD690G > dom0:sdb1 ... > dom0:sdb2 > etc > > If I try to mount xvdi as LUKS: It is not a valid LUKS > I do think that the right partition to mount should be "sdb5" ... How to > mount "sdb5" ?? > > Thx > > > > Le samedi 28 janvier 2017 12:43:57 UTC+2, ThierryIT a écrit : > > > qvm-block command not found ... ?? > > > I am right to do it from my vm-test ? > > > > > > Thx > > > > > > Le samedi 28 janvier 2017 12:10:26 UTC+2, Andrew David Wong a écrit : > > > > -BEGIN PGP SIGNED MESSAGE- > > > > Hash: SHA512 > > > > > > > > On 2017-01-28 01:45, ThierryIT wrote: > > > > > Hi, > > > > > > > > > > I have installed with success Qubes 3.2 on my Lenovo W520. I ma > > > > > bit by bit playing with it. I would like to have access to my old > > > > > encrypted hard drive, still do remember the passphrase :) I have > > > > > build a new vm, let's call it "vm-test" I have attached the block > > > > > device to it, seems to be good ... But after ? How to mount it ?? > > > > > > > > > > Thx > > > > > > > > > > > > > It's probably mounted as /dev/xvdi (you can check with qvm-block). > > > > So, in vm-test, try something like: > > > > > > > > $ sudo cryptsetup open /dev/xvdi hdd > > > > > > > > $ sudo mount /dev/mapper/hdd /mnt/removable > > > > $ cd /mnt/removable > > > > $ ls > > > > > > > > - -- > > > > Andrew David Wong (Axon) > > > > Community Manager, Qubes OS > > > > https://www.qubes-os.org > > > > -BEGIN PGP SIGNATURE- > > > > > > > > iQIcBAEBCgAGBQJYjG4DAAoJENtN07w5UDAwQO0QAMPg3I4YoMMxMRcJSt6ds8/i > > > > qdTXOg5YrG9dglctSfK9FWdr066wdar/8k7R9DIyX/ndg8p9sfPXq8Gdlzw0KiEH > > > > G6kLAXVZN4qQ4fQYnMhZE6AhUlj6ZjsPA6+BUr4NyzoCyd0z0wfhyvm2ulR8VoUA > > > > /FiZOFYWQ2oFnJed4LUV3KgaT9TOo969zbZ306KsFUV6CqZw38My4B8qfqr0/qC4 > > > > RklCHG/D230AXAq9PtOY1wH/sCbNFR8wqnUoNIIT+qPxWtnXZFtcNZuqmiKiSDAB > > > > WdlnJEJ0ktDRT99RhrIcnTDLBXel/e0l9Y6YtV+spVPhPdPMRcppeyQzboAtPTfw > > > > UfA4wri5KuDROgJ5RpopkfyXyEJz7yWg8hQXyfqRKf+IDoIHxEyhYA8v0CDBjACT > > > > 3zu7SFn21ki9N94SV7wTL0ODQjVTNtrtlHB/jrs2/s0HVacxIxOm9DbuDdCAHNqO > > > > OAj+NjSNa2jcXlF1/l24hsEAabBVMUrPhtPeaw7WoTxkADv1KM5lNUS4mcYhwsPg > > > > BfLjtsTcaYKRQaxi26WcAzdem2kUhHG31RzSAEAuHXTC0S+aEJv3UgAf++Xhn/F2 > > > > nBgYV2hz5WlU6u5OdBLQppUXPEuwKhwp7Um5hUKHFN3+eYK9sPWbK2JpYc2i2lSs > > > > Qc4E/xMl/TLaJd1IHMfX > > > > =xkVz > > > > -END PGP SIGNATURE- -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/45cd91eb-efbf-4e72-880f-aed04ad9a1d7%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] mounting external encrypted (LUKS-debian8) hard drive ??
> My mistake. > I did it from "dom0" > dom0:sdb WD.698G (attached to vm-test as 'xvdi') dom0:sdb5 WD690G dom0:sdb1 ... dom0:sdb2 etc If I try to mount xvdi as LUKS: It is not a valid LUKS I do think that the right partition to mount should be "sdb5" ... How to mount "sdb5" ?? Thx > > Le samedi 28 janvier 2017 12:43:57 UTC+2, ThierryIT a écrit : > > qvm-block command not found ... ?? > > I am right to do it from my vm-test ? > > > > Thx > > > > Le samedi 28 janvier 2017 12:10:26 UTC+2, Andrew David Wong a écrit : > > > -BEGIN PGP SIGNED MESSAGE- > > > Hash: SHA512 > > > > > > On 2017-01-28 01:45, ThierryIT wrote: > > > > Hi, > > > > > > > > I have installed with success Qubes 3.2 on my Lenovo W520. I ma > > > > bit by bit playing with it. I would like to have access to my old > > > > encrypted hard drive, still do remember the passphrase :) I have > > > > build a new vm, let's call it "vm-test" I have attached the block > > > > device to it, seems to be good ... But after ? How to mount it ?? > > > > > > > > Thx > > > > > > > > > > It's probably mounted as /dev/xvdi (you can check with qvm-block). > > > So, in vm-test, try something like: > > > > > > $ sudo cryptsetup open /dev/xvdi hdd > > > > > > $ sudo mount /dev/mapper/hdd /mnt/removable > > > $ cd /mnt/removable > > > $ ls > > > > > > - -- > > > Andrew David Wong (Axon) > > > Community Manager, Qubes OS > > > https://www.qubes-os.org > > > -BEGIN PGP SIGNATURE- > > > > > > iQIcBAEBCgAGBQJYjG4DAAoJENtN07w5UDAwQO0QAMPg3I4YoMMxMRcJSt6ds8/i > > > qdTXOg5YrG9dglctSfK9FWdr066wdar/8k7R9DIyX/ndg8p9sfPXq8Gdlzw0KiEH > > > G6kLAXVZN4qQ4fQYnMhZE6AhUlj6ZjsPA6+BUr4NyzoCyd0z0wfhyvm2ulR8VoUA > > > /FiZOFYWQ2oFnJed4LUV3KgaT9TOo969zbZ306KsFUV6CqZw38My4B8qfqr0/qC4 > > > RklCHG/D230AXAq9PtOY1wH/sCbNFR8wqnUoNIIT+qPxWtnXZFtcNZuqmiKiSDAB > > > WdlnJEJ0ktDRT99RhrIcnTDLBXel/e0l9Y6YtV+spVPhPdPMRcppeyQzboAtPTfw > > > UfA4wri5KuDROgJ5RpopkfyXyEJz7yWg8hQXyfqRKf+IDoIHxEyhYA8v0CDBjACT > > > 3zu7SFn21ki9N94SV7wTL0ODQjVTNtrtlHB/jrs2/s0HVacxIxOm9DbuDdCAHNqO > > > OAj+NjSNa2jcXlF1/l24hsEAabBVMUrPhtPeaw7WoTxkADv1KM5lNUS4mcYhwsPg > > > BfLjtsTcaYKRQaxi26WcAzdem2kUhHG31RzSAEAuHXTC0S+aEJv3UgAf++Xhn/F2 > > > nBgYV2hz5WlU6u5OdBLQppUXPEuwKhwp7Um5hUKHFN3+eYK9sPWbK2JpYc2i2lSs > > > Qc4E/xMl/TLaJd1IHMfX > > > =xkVz > > > -END PGP SIGNATURE- -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/a8935e96-ac1a-4f54-a080-5c82118440a0%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] mounting external encrypted (LUKS-debian8) hard drive ??
My mistake. I did it from "dom0" dom0:sdb WD.698G (attached to vm-test as 'xvdi') Le samedi 28 janvier 2017 12:43:57 UTC+2, ThierryIT a écrit : > qvm-block command not found ... ?? > I am right to do it from my vm-test ? > > Thx > > Le samedi 28 janvier 2017 12:10:26 UTC+2, Andrew David Wong a écrit : > > -BEGIN PGP SIGNED MESSAGE- > > Hash: SHA512 > > > > On 2017-01-28 01:45, ThierryIT wrote: > > > Hi, > > > > > > I have installed with success Qubes 3.2 on my Lenovo W520. I ma > > > bit by bit playing with it. I would like to have access to my old > > > encrypted hard drive, still do remember the passphrase :) I have > > > build a new vm, let's call it "vm-test" I have attached the block > > > device to it, seems to be good ... But after ? How to mount it ?? > > > > > > Thx > > > > > > > It's probably mounted as /dev/xvdi (you can check with qvm-block). > > So, in vm-test, try something like: > > > > $ sudo cryptsetup open /dev/xvdi hdd > > > > $ sudo mount /dev/mapper/hdd /mnt/removable > > $ cd /mnt/removable > > $ ls > > > > - -- > > Andrew David Wong (Axon) > > Community Manager, Qubes OS > > https://www.qubes-os.org > > -BEGIN PGP SIGNATURE- > > > > iQIcBAEBCgAGBQJYjG4DAAoJENtN07w5UDAwQO0QAMPg3I4YoMMxMRcJSt6ds8/i > > qdTXOg5YrG9dglctSfK9FWdr066wdar/8k7R9DIyX/ndg8p9sfPXq8Gdlzw0KiEH > > G6kLAXVZN4qQ4fQYnMhZE6AhUlj6ZjsPA6+BUr4NyzoCyd0z0wfhyvm2ulR8VoUA > > /FiZOFYWQ2oFnJed4LUV3KgaT9TOo969zbZ306KsFUV6CqZw38My4B8qfqr0/qC4 > > RklCHG/D230AXAq9PtOY1wH/sCbNFR8wqnUoNIIT+qPxWtnXZFtcNZuqmiKiSDAB > > WdlnJEJ0ktDRT99RhrIcnTDLBXel/e0l9Y6YtV+spVPhPdPMRcppeyQzboAtPTfw > > UfA4wri5KuDROgJ5RpopkfyXyEJz7yWg8hQXyfqRKf+IDoIHxEyhYA8v0CDBjACT > > 3zu7SFn21ki9N94SV7wTL0ODQjVTNtrtlHB/jrs2/s0HVacxIxOm9DbuDdCAHNqO > > OAj+NjSNa2jcXlF1/l24hsEAabBVMUrPhtPeaw7WoTxkADv1KM5lNUS4mcYhwsPg > > BfLjtsTcaYKRQaxi26WcAzdem2kUhHG31RzSAEAuHXTC0S+aEJv3UgAf++Xhn/F2 > > nBgYV2hz5WlU6u5OdBLQppUXPEuwKhwp7Um5hUKHFN3+eYK9sPWbK2JpYc2i2lSs > > Qc4E/xMl/TLaJd1IHMfX > > =xkVz > > -END PGP SIGNATURE- -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/df0145b2-5fbc-4ad9-b77e-67722b71dd8b%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] mounting external encrypted (LUKS-debian8) hard drive ??
qvm-block command not found ... ?? I am right to do it from my vm-test ? Thx Le samedi 28 janvier 2017 12:10:26 UTC+2, Andrew David Wong a écrit : > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA512 > > On 2017-01-28 01:45, ThierryIT wrote: > > Hi, > > > > I have installed with success Qubes 3.2 on my Lenovo W520. I ma > > bit by bit playing with it. I would like to have access to my old > > encrypted hard drive, still do remember the passphrase :) I have > > build a new vm, let's call it "vm-test" I have attached the block > > device to it, seems to be good ... But after ? How to mount it ?? > > > > Thx > > > > It's probably mounted as /dev/xvdi (you can check with qvm-block). > So, in vm-test, try something like: > > $ sudo cryptsetup open /dev/xvdi hdd > > $ sudo mount /dev/mapper/hdd /mnt/removable > $ cd /mnt/removable > $ ls > > - -- > Andrew David Wong (Axon) > Community Manager, Qubes OS > https://www.qubes-os.org > -BEGIN PGP SIGNATURE- > > iQIcBAEBCgAGBQJYjG4DAAoJENtN07w5UDAwQO0QAMPg3I4YoMMxMRcJSt6ds8/i > qdTXOg5YrG9dglctSfK9FWdr066wdar/8k7R9DIyX/ndg8p9sfPXq8Gdlzw0KiEH > G6kLAXVZN4qQ4fQYnMhZE6AhUlj6ZjsPA6+BUr4NyzoCyd0z0wfhyvm2ulR8VoUA > /FiZOFYWQ2oFnJed4LUV3KgaT9TOo969zbZ306KsFUV6CqZw38My4B8qfqr0/qC4 > RklCHG/D230AXAq9PtOY1wH/sCbNFR8wqnUoNIIT+qPxWtnXZFtcNZuqmiKiSDAB > WdlnJEJ0ktDRT99RhrIcnTDLBXel/e0l9Y6YtV+spVPhPdPMRcppeyQzboAtPTfw > UfA4wri5KuDROgJ5RpopkfyXyEJz7yWg8hQXyfqRKf+IDoIHxEyhYA8v0CDBjACT > 3zu7SFn21ki9N94SV7wTL0ODQjVTNtrtlHB/jrs2/s0HVacxIxOm9DbuDdCAHNqO > OAj+NjSNa2jcXlF1/l24hsEAabBVMUrPhtPeaw7WoTxkADv1KM5lNUS4mcYhwsPg > BfLjtsTcaYKRQaxi26WcAzdem2kUhHG31RzSAEAuHXTC0S+aEJv3UgAf++Xhn/F2 > nBgYV2hz5WlU6u5OdBLQppUXPEuwKhwp7Um5hUKHFN3+eYK9sPWbK2JpYc2i2lSs > Qc4E/xMl/TLaJd1IHMfX > =xkVz > -END PGP SIGNATURE- -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/0040e4c8-c292-4958-b923-95553997a136%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] mounting external encrypted (LUKS-debian8) hard drive ??
-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 On 2017-01-28 01:45, ThierryIT wrote: > Hi, > > I have installed with success Qubes 3.2 on my Lenovo W520. I ma > bit by bit playing with it. I would like to have access to my old > encrypted hard drive, still do remember the passphrase :) I have > build a new vm, let's call it "vm-test" I have attached the block > device to it, seems to be good ... But after ? How to mount it ?? > > Thx > It's probably mounted as /dev/xvdi (you can check with qvm-block). So, in vm-test, try something like: $ sudo cryptsetup open /dev/xvdi hdd $ sudo mount /dev/mapper/hdd /mnt/removable $ cd /mnt/removable $ ls - -- Andrew David Wong (Axon) Community Manager, Qubes OS https://www.qubes-os.org -BEGIN PGP SIGNATURE- iQIcBAEBCgAGBQJYjG4DAAoJENtN07w5UDAwQO0QAMPg3I4YoMMxMRcJSt6ds8/i qdTXOg5YrG9dglctSfK9FWdr066wdar/8k7R9DIyX/ndg8p9sfPXq8Gdlzw0KiEH G6kLAXVZN4qQ4fQYnMhZE6AhUlj6ZjsPA6+BUr4NyzoCyd0z0wfhyvm2ulR8VoUA /FiZOFYWQ2oFnJed4LUV3KgaT9TOo969zbZ306KsFUV6CqZw38My4B8qfqr0/qC4 RklCHG/D230AXAq9PtOY1wH/sCbNFR8wqnUoNIIT+qPxWtnXZFtcNZuqmiKiSDAB WdlnJEJ0ktDRT99RhrIcnTDLBXel/e0l9Y6YtV+spVPhPdPMRcppeyQzboAtPTfw UfA4wri5KuDROgJ5RpopkfyXyEJz7yWg8hQXyfqRKf+IDoIHxEyhYA8v0CDBjACT 3zu7SFn21ki9N94SV7wTL0ODQjVTNtrtlHB/jrs2/s0HVacxIxOm9DbuDdCAHNqO OAj+NjSNa2jcXlF1/l24hsEAabBVMUrPhtPeaw7WoTxkADv1KM5lNUS4mcYhwsPg BfLjtsTcaYKRQaxi26WcAzdem2kUhHG31RzSAEAuHXTC0S+aEJv3UgAf++Xhn/F2 nBgYV2hz5WlU6u5OdBLQppUXPEuwKhwp7Um5hUKHFN3+eYK9sPWbK2JpYc2i2lSs Qc4E/xMl/TLaJd1IHMfX =xkVz -END PGP SIGNATURE- -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/d06d81df-a635-4ffc-a07c-081471146288%40qubes-os.org. For more options, visit https://groups.google.com/d/optout.
[qubes-users] mounting external encrypted (LUKS-debian8) hard drive ??
Hi, I have installed with success Qubes 3.2 on my Lenovo W520. I ma bit by bit playing with it. I would like to have access to my old encrypted hard drive, still do remember the passphrase :) I have build a new vm, let's call it "vm-test" I have attached the block device to it, seems to be good ... But after ? How to mount it ?? Thx -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/7b7cda34-2325-4df6-89b4-665ea0a8f408%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
