[qubes-users] Re: Looking for Qubes OS-Users in Munich-Germany

2017-11-23 Thread Sergio Matta
Em quarta-feira, 22 de novembro de 2017 13:30:09 UTC-2, in...@websecur.eu escreveu: > Hi,my name is Knut von Walter.In order to progress in my understanding of > Qubes OS, I am looking for members of the Qubes-community in > Munich-Bavaria-Germany. Thank you. Best of best Knut von Walter

[qubes-users] 4.0 RC3 IO Remapping differences - qubes-hcl and xl dmesg on Asus Sabertooth Rev 2.0 bios 2901

2017-11-29 Thread Sergio Matta
I am already using RC3 and everything is working fine, but: qubes-hcl-report says HVM: Active I/O MMU: Active HAP/SLAT Yes Remapping: no xl dmesg says (XEN) AMD-Vi: IOMMU 0 Enabled. (XEN) I/O virtualisation enabled (XEN) - Dom0: mode: Relaxed (XEN) Interrupt remapping enabled Is

Re: [qubes-users] 4.0-rc2 install error

2017-11-09 Thread Sergio Matta
I have this problem with my unsupported iommu motherboard. My solution was change my vms to pv in a dom0 terminal with qvm-prefs vm-name (sys-net,sys-firewall,personal,work) virt_mod pv and insert ip commands in rw-config-rc.local (sorry but this mac has no slash) In sys-net edit

[qubes-users] Re: Qubes 4.0-rc2 :: VMs fail to start

2017-10-31 Thread Sergio Matta
Em terça-feira, 31 de outubro de 2017 11:10:22 UTC-2, Roy Bernat escreveu: > On Tuesday, 31 October 2017 14:56:46 UTC+2, Roy Bernat wrote: > > On Tuesday, 31 October 2017 14:52:10 UTC+2, Roy Bernat wrote: > > > On Wednesday, 25 October 2017 20:26:51 UTC+3, [799] wrote: > > > > Hello, > > > >

[qubes-users] Re: I can't install Qubes 4.0

2018-05-04 Thread Sergio Matta
My problem is at your picture 3. I tried other xdrivers and nothing. Anacona text install causes another problem with luks key. IMHO the install has no support for my graphics card. I am using nvidia gtx 1050ti with a 4k big tv, but I tried with radeon rx560 and rx460, too. Even 3.2 has the

Re: [qubes-users] Re: Qubes R4.0 - no internet working in appVM

2018-05-14 Thread Sergio Matta
Em segunda-feira, 14 de maio de 2018 13:55:51 UTC-3, niepo...@gmail.com escreveu: > On Sunday, May 13, 2018 at 11:59:16 AM UTC-4, awokd wrote: > > On Sat, May 12, 2018 7:08 pm, wrote: > > > netVM has ok ping to google.com > > > firewallVM has no pings > > > appVM has also no pings > > > > > >

[qubes-users] Re: How to Add additional Drive and Erase/Clean it?

2018-05-09 Thread Sergio Matta
Em quarta-feira, 9 de maio de 2018 17:43:57 UTC-3, levo...@gmail.com escreveu: > I have 1TB Drive (with name /dev/sdc2 in Dom0). But the same time this drive > has 3 partitioins. > > > How can I erase all partitions or all drive so that at the output I can get a > drive with 1 partition? > >

[qubes-users] Re: Qubes R4.0 - no internet working in appVM

2018-05-12 Thread Sergio Matta
Em sábado, 12 de maio de 2018 16:08:11 UTC-3, niepo...@gmail.com escreveu: > netVM has ok ping to google.com > firewallVM has no pings > appVM has also no pings 1) do you ping by ip, ex. ping 8.8.8.8? if yes set dns if not 2) in a dom0 terminal, qvm-ls sys-net shows virt_mode hvm, qvm-ls

[qubes-users] Re: Qubes R4.0 advantange over R3.2 ?

2018-05-13 Thread Sergio Matta
Em domingo, 13 de maio de 2018 04:54:48 UTC-3, niepo...@gmail.com escreveu: > As i have internet connection problem on Qubes R4.0 that i' unable to resolve > i probably back to qubes R3.2. > My question is Qubes R.4.0 significantly more secure over R3.2? > Is version R3.2 has known not resolved

Re: [qubes-users] Re: install fedora 28

2018-05-19 Thread Sergio Matta
I updated my templates fedora-26 to 27 and after to 28. The docs are here: https://www.qubes-os.org/doc/template/fedora/upgrade-27-to-28/ About the conflict with dconf, I included -x dconf to the upgrade dnf command. After that I did: sudo dnf update --allowerasing --best

[qubes-users] Re: Q4.0 Fedora-26 -> Fedora-28 python3.6 errors

2018-05-20 Thread Sergio Matta
Em domingo, 20 de maio de 2018 15:00:12 UTC-3, jhsd...@gmail.com escreveu: > On Thursday, May 17, 2018 at 8:52:20 AM UTC+3, john wrote: > > On 05/16/18 10:45, john wrote: > > > On 05/16/18 04:16, Blaumeer wrote: > > >> Similar situation, different error. Did upgrade to 28 with the python > > >>

[qubes-users] Re: Qubes v4.0 - no network except in sys-net

2018-05-23 Thread Sergio Matta
Em terça-feira, 22 de maio de 2018 20:02:40 UTC-3, Victor Shlein escreveu: > Hello. > > > > Recently installed Qubes OS 4.0 to my laptop, connected an Ethernet cable and > expected it to work... > > > > But: > > 1. I was forced to switch sys-net from HVM to PV (because no VT-d, so it >

[qubes-users] Re: 4K Scaling is working properly at Qubes 4.0 ?

2018-05-25 Thread Sergio Matta
Em sexta-feira, 25 de maio de 2018 19:45:25 UTC-3, loret escreveu: > On Friday, May 25, 2018 at 11:26:09 PM UTC+2, Sergio Matta wrote: > > Em sexta-feira, 25 de maio de 2018 13:51:59 UTC-3, konner escreveu: > > > -does qubes scale properly now once you select 4k scaling? >

[qubes-users] Re: 4K Scaling is working properly at Qubes 4.0 ?

2018-05-25 Thread Sergio Matta
Em sexta-feira, 25 de maio de 2018 13:51:59 UTC-3, konner escreveu: > -does qubes scale properly now once you select 4k scaling? > including start menu , app icons and gedit,...? > 3.2 has issues with this My Qubes 4.0, cpu AM3 X6, graphics Rx560 is connected to a Sony 4k tv and working fine

[qubes-users] Re: Fedora-27 Template Issues, Qubes 3.2

2018-05-24 Thread Sergio Matta
Em quinta-feira, 24 de maio de 2018 16:31:22 UTC-3, Stuart Perkins escreveu: > Now that the Fedora 27 template is available, I downloaded and installed it > without issue. Modifying sys-net and sys-firewall to use it fails miserably > though..no network connectivity. Anybody else get this? >

Re: [qubes-users] Re: Qubes R4.0 - no internet working in appVM

2018-05-15 Thread Sergio Matta
Em terça-feira, 15 de maio de 2018 23:39:20 UTC-3, awokd escreveu: > On Mon, May 14, 2018 7:43 pm, Sergio Matta wrote: > > Em segunda-feira, 14 de maio de 2018 13:55:51 UTC-3, niepo...@gmail.com > > escreveu: > > >> appVM's are not restored. All is default except I ch

Re: [qubes-users] Re: Qubes R4.0 - no internet working in appVM

2018-05-15 Thread Sergio Matta
> I know PV is not recommended, but thought it was still supported under > R4.0 and Xen? If so, networking should work too, but you're right- it > won't be a priority. PV is still supported by Xen. It will works fine after he create the routes. I agree there is not enough people using PV to be

[qubes-users] Gnome-control-center empty after fedora-27 template install

2018-05-26 Thread Sergio Matta
It only shows a empty window, even in fedora-27. I can not setup my printer. Any ideas? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[qubes-users] Re: Gnome-control-center empty after fedora-27 template install - FIXED

2018-05-26 Thread Sergio Matta
>From Reddit, lauch it with: env XDG_CURRENT_DESKTOP=GNOME gnome-control-center It is working! https://www.reddit.com/r/archlinux/comments/75zpfe/gnomecontrolcenter32611_is_empty/ -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe

[qubes-users] Re: Why does sys-firewall needs so much RAM?

2018-05-27 Thread Sergio Matta
> I am wondering why my sys-firewall always need > 3 GB of RAM. > What is running there that needs so much memory? my sys-firewall has the original template and uses 2gb. my personal/work has a cloned template, many installations and uses 3.5 gb. -- You received this message because you are

[qubes-users] Re: Hardware not supported on Qubes 4.0 rc2

2017-10-27 Thread Sergio Matta
Em quinta-feira, 26 de outubro de 2017 15:37:10 UTC-2, Anirban Kar escreveu: > My Hardware: > Processor- AMD Athlon X2 5200 > Mobo- Asrock 960GC-GS FX > RAM- DDR2 800 MHz 2× 2GB > HDD - Seagate 250 GB SATA 7200 rpm > > > I can install and use Qubes 3.2 without any hassel but facing a hardware

Re: [qubes-users] How to play videos in qubes? says needs codec H.264, Mpeg-4 something

2018-01-17 Thread Sergio Matta
Em quarta-feira, 17 de janeiro de 2018 08:05:07 UTC-2, Tim W escreveu: > On Tuesday, January 16, 2018 at 2:53:54 PM UTC-5, [799] wrote: > > Hello Jerry, > > > > What are you trying to accomplish? > > I have a complete How-to which you can just follow per copy & paste to get > > a multimedia

Re: [qubes-users] Re: inst.text boot option

2018-04-19 Thread Sergio Matta
> Just a shot in the dark, but regarding workarounds for graphics cards > problems: > With Legacy BIOS boot, have you tried to add " nouveau.modeset=0 " on the > module code-line right after "quiet"? > > Regards, > Teqleez Thank you Teqleez. Your idea looks like change something. I tried

[qubes-users] setting vms to use another xserver

2018-10-16 Thread Sergio Matta
Is there a easy way to set all Qubes X to use a external X server? I want to open all vm windows from my Qubes desktop computer on my linux accelerated notebook. Thank you. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from

[qubes-users] using my notebook as xserver to qubes vms

2018-10-16 Thread Sergio Matta
My excellent Qubes is on my desktop computer, but it lacks some dom0 functionallity. Is there a easy way or anyway to setup Qubes so I can use my notebook with accelerated video card to run the dom0 menu and all my window vms as xserver to Qubes? Thank you! -- You received this message

[qubes-users] Re: Where to find the Fedora-29 Templates (Announencement Qubes 4.0.1-rc1)

2018-11-07 Thread Sergio Matta
Em quarta-feira, 7 de novembro de 2018 16:38:45 UTC-2, 799 escreveu: > Hello, > > > I've read about the new release candidate 4.0.1 > > https://www.qubes-os.org/news/2018/11/05/qubes-401-rc1/ > > > it was mention that it includes a fedora-29 template VM. > As most of my AppVM are fedora-28

[qubes-users] Re: Installation, no AMD-vi, interrupt mapping, etc.

2018-10-02 Thread Sergio Matta
Em segunda-feira, 1 de outubro de 2018 19:55:24 UTC-3, Sergio Matta escreveu: > Em segunda-feira, 1 de outubro de 2018 16:04:34 UTC-3, naas...@gmail.com > escreveu: > > Installation went fine except for a libxenlight config error of some kind. > > I still can't enable

[qubes-users] Re: Installation, no AMD-vi, interrupt mapping, etc.

2018-10-02 Thread Sergio Matta
Em terça-feira, 2 de outubro de 2018 09:17:43 UTC-3, Sergio Matta escreveu: > Em segunda-feira, 1 de outubro de 2018 19:55:24 UTC-3, Sergio Matta escreveu: > > Em segunda-feira, 1 de outubro de 2018 16:04:34 UTC-3, naas...@gmail.com > > escreveu: > > > Insta

[qubes-users] Re: Installation, no AMD-vi, interrupt mapping, etc.

2018-10-01 Thread Sergio Matta
Em segunda-feira, 1 de outubro de 2018 16:04:34 UTC-3, naas...@gmail.com escreveu: > Installation went fine except for a libxenlight config error of some kind. I > still can't enable IOMMU using either of the approaches described in that > Ubuntu thread, even though it successfully worked with

[qubes-users] Re: Installation, no AMD-vi, interrupt mapping, etc.

2018-10-01 Thread Sergio Matta
> I updated the bios but still no luck, so I tried a manual procedure as > described at [1]: I ran a recent live linux distro from a USB key and > confirmed that interrupt remapping was disabled by default due to this BIOS > bug. I then figured out the IOMMU and SMBus addresses using the

[qubes-users] Re: Installation, no AMD-vi, interrupt mapping, etc.

2018-10-01 Thread Sergio Matta
Are you suggesting I just proceed with the installation regardless and try to set these parameters in the grub booting config after I get up and running? > > Sandro > Yes! And even if iommu does not works, you will be able to use Qubes 4 VM as PV. Networking will need to set up by hand and

[qubes-users] my dom0 is not updating since before 4.01

2019-01-06 Thread Sergio Matta
I think I have a problem with yum file configuration. Fedora 25 looks like ok but Qubes never finds data: Fedora 25 - x86_64 - Updates 1.0 MB/s | 24 MB 00:24 Fedora 25 - x86_64 2.0 MB/s | 50 MB 00:25 Qubes Dom0 Repository (updates)

[qubes-users] Re: my dom0 is not updating since before 4.01

2019-01-06 Thread Sergio Matta
Em domingo, 6 de janeiro de 2019 13:25:17 UTC-2, simon@gmail.com escreveu: > On Sunday, January 6, 2019 at 1:32:45 PM UTC, Sergio Matta wrote: > > I think I have a problem with yum file configuration. Fedora 25 looks like > > ok but Qubes never finds data: > > &

Re: [qubes-users] last qubes-dom0-update brings kernel 4.19 and crashs login

2019-01-23 Thread Sergio Matta
> Sergio do you also have a radeon card? > Yes. Mine is RX-560. I already installed the amdgpu and vulkan drivers, but it still not working with kernel 4-19. Works fine with 4-14 and the drivers too. > > > You should be able to choose older version in grub menu. > > That's what works for

Re: [qubes-users] last qubes-dom0-update brings kernel 4.19 and crashs login

2019-01-23 Thread Sergio Matta
> Do you see text login available? Maybe on tty2 (alt+ctrl+f2)? You can > login there and see lightdm service status (`sudo systemctl status > lightdm`), which is responsible for the graphical login. If it's failed, > what it says there (you should have few log lines there)? Yes, It fails

[qubes-users] last qubes-dom0-update brings kernel 4.19 and crashs login

2019-01-19 Thread Sergio Matta
Yesterday I started qubes-dom0-update and it installs kernel-4.19. Looks great! But it is not starting graphical login anymore. I did sudo dnf downgrade kernel and it didin't work. I had to change grub to fix. -- You received this message because you are subscribed to the Google Groups

[qubes-users] Qubes 4 are "Starting Start Qubes VM personal" and it does not starts it and either has no time-out!

2018-11-20 Thread Sergio Matta
I already tried init 2 (too late) init S (too early) and init 1 (root is locked). Does somebody has a way to not start the vm or set a timeout or get dom0 terminal? Or any other ideia to login? Thank you! -- You received this message because you are subscribed to the Google Groups

Re: [qubes-users] Qubes 4 are "Starting Start Qubes VM personal" and it does not starts it and either has no time-out!

2018-11-22 Thread Sergio Matta
Em quinta-feira, 22 de novembro de 2018 15:35:21 UTC-2, awokd escreveu: > Sergio Matta wrote on 11/20/18 11:49 PM: > > I already tried init 2 (too late) init S (too early) and init 1 (root is > > locked). > > Does somebody has a way to not start the vm or set a timeout or g

Re: [qubes-users] Re: my dom0 is not updating since before 4.01

2019-01-07 Thread Sergio Matta
Em segunda-feira, 7 de janeiro de 2019 10:42:25 UTC-2, unman escreveu: > On Sun, Jan 06, 2019 at 07:48:00PM -0800, Sergio Matta wrote: > > Em domingo, 6 de janeiro de 2019 13:25:17 UTC-2, simon@gmail.com > > escreveu: > > > On Sunday, January 6, 2019 at 1:32:45 PM

[qubes-users] Re: "Introducing the Qubes U2F Proxy" by Wojtek Porczyk

2018-09-12 Thread Sergio Matta
Em terça-feira, 11 de setembro de 2018 13:38:09 UTC-3, Brendan Hoar escreveu: > On Tuesday, September 11, 2018 at 5:18:49 AM UTC-4, Andrew David Wong wrote: > > -BEGIN PGP SIGNED MESSAGE- > > Hash: SHA512 > > > > Dear Qubes Community, > > > > Wojtek Porczyk has just published a new

[qubes-users] Qubes-HCL-ASUSTeK_COMPUTER_INC_-SABERTOOTH_990FX_R2_0-20190304-013235

2019-03-03 Thread Sergio Matta
Changes from previous: - CPU AM3 1100T, now AM3+ FX-8300 - VGA AMD Radeon RX-560 (do not boots 4.19.15-1), now Nvidia GTX-1050Ti (works fine) - SSD 480GB installed but not using yet. I will mount it to use with vms. --- layout: 'hcl' type: 'desktop' hvm: 'yes' iommu: 'yes' slat: 'yes'

[qubes-users] #ReactOS 0.4.11 is out!! Supported new AHCI SATA controllers, but still not installing in Qubes 4.0

2019-03-04 Thread Sergio Matta
ReactOS 0.4.11 is out!! Supported new AHCI SATA controllers, more #Software working thanks to correct manifest loading, #RTL support, new Update feature... More info: https://reactos.org/project-news/reactos-0411-released … Download it from: https://reactos.org/download It boots but does not

Re: [qubes-users] #ReactOS 0.4.11 is out!! Supported new AHCI SATA controllers, but still not installing in Qubes 4.0

2019-03-12 Thread Sergio Matta
Dear Stumpy I am not part of ReactOS team. I am just a user. It was running when I was using Qubes 3.2. "I just ask because it seems to me that the reactos project would be perfect for those of us that are forced to run some win apps." I tottaly agree with you! "Just curious about if/how much

[qubes-users] Re: Dom0 some updates always skipped

2019-02-15 Thread Sergio Matta
> Some updates show as always skipped after each qubes-dom0-update run. > > How to fix this? Maybe "sudo qubes-dom0-update --best --allowerasing" can solve your problem, if not, tell us what packages are not installing. -- You received this message because you are subscribed to the

[qubes-users] Re: Dom0 some updates always skipped

2019-02-15 Thread Sergio Matta
Em sexta-feira, 15 de fevereiro de 2019 23:03:12 UTC-2, Sergio Matta escreveu: > > Some updates show as always skipped after each qubes-dom0-update run. > > > > How to fix this? > > Maybe "sudo qubes-dom0-update --best --allowerasing" can solve your problem

Re: [qubes-users] last qubes-dom0-update brings kernel 4.19 and crashs login

2019-01-23 Thread Sergio Matta
> rx 560? Have you tried adding 'amdgpu.dc=1' to the kernel parameters? > hd7790 should work fine using the old radeon driver though. Yes. It is working with kernel 4-14 and this boot option, thank you! -- You received this message because you are subscribed to the Google Groups "qubes-users"

Re: [qubes-users] installing databases on templates and they need updates.

2019-04-17 Thread Sergio Matta
> I run a number of databases using bind-dirs without any issues: the > larger ones contain significant amounts of data. > I also run a caching proxy using bind-dirs to store the log files and > cached packages. > I have never encountered any issues with this. YMMV That's good to know. I have few

[qubes-users] installing databases on templates and they need updates.

2019-04-16 Thread Sergio Matta
Dear Qubes People, What would be the location indicated for systems databases, since they are installed in the template and can not be modified by the VM? In the case of ldap, which uses /var/lib/ldap, I changed the location setting of DB to /rw/var/lib/ldap. But Qubes must have a strategy for

[qubes-users] Re: Fixing support for H.264/MSE & H.264 playback on firefox in Fedora-29

2019-05-06 Thread Sergio Matta
> Does anyone know which specific packages need to be installed Try this info: https://forums.fedoraforum.org/showthread.php?317721-fedora-28-and-firefox-video(h264-youtube-gstreamer1) -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To

[qubes-users] Re: Fully Working Android VM for Qubes available? (2019)

2019-04-24 Thread Sergio Matta
chromeos and reactos has the same problem. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send

Re: [qubes-users] installing databases on templates and they need updates.

2019-04-17 Thread Sergio Matta
> On 4/17/19 3:16 PM, Sergio Matta wrote: > > > In my mind the solution was something like a persistent and shared > > mount point with the vm and its template, > > This is a very bad idea. > You would ruin the separation between the VMs, as one compromised VM &g

Re: [qubes-users] installing databases on templates and they need updates.

2019-04-17 Thread Sergio Matta
> Look at bind-dirs - www.qubes-os.org/doc/bind-dirs Thank you Unman. I am using Qubes since 3.2 and I did not remember this solution. It is time to me to read the Qubes documentation all over again. I will use bind-dirs to solve my other need with configuration files located in /etc and

[qubes-users] Re: Done with Qubes

2019-08-23 Thread Sergio Matta
> > Thanks for all the help but I've been trying to figure out how to get > Qubes running for months and I've decided it's just a giant waste of my > time because every time I get one bug fixed, two more show up to take it's > place. I think it's a brilliant idea but it needs a lot of work

[qubes-users] Re: Chromium OS in qubes

2020-02-11 Thread Sergio Matta
> > > Did anyone tried or better succeeded in installing Chromium OS in qubes? > > It did not installs here. Not even Android or React/OS. Something about not recognizing the disk to be installed. A kind of Xen driver problem. This is a very old situation. I dont think it will be solved. --