Re: [qubes-users] General setup questions from Noob

2021-02-22 Thread Alexander Reseneder
Does really no one knows an fix for it?

Alexander Reseneder schrieb am Sonntag, 21. Februar 2021 um 19:12:54 UTC+1:

> There is one thread about authy in the mailing list and it is from me.. :(
>
> awokd schrieb am Sonntag, 21. Februar 2021 um 15:24:56 UTC+1:
>
>> Alexander Reseneder:
>> > Hello qubes-users,
>> > 
>> > im a Noob to Linux, but i wanna try it because it seems that it offers
>> > great security advantages over a normal "bare metal" System or Windows.
>> > 
>> > However i have some problems, like setup my network printer properly, i
>>
>> Have you seen 
>>
>> https://github.com/Qubes-Community/Contents/blob/master/docs/configuration/network-printer.md
>> ?
>>
>> > Also i ran into that problem that my Authy client installed over Snap
>> > stopped working, terminal prints out that:
>>
>> IIRC, both Authy and Snap can be challenging to run under Qubes, but I 
>> don't remember what it takes. Think others have managed though. Try 
>> searching this mailing list for "Authy"?
>>
>> > Also i want to update my old InsydeH20 Bios, because it is the first
>> > release version and my PC is from 2016, they were several ME Firewall
>> > patches and also drivers for touchpad for linux were delivered etc. etc.
>> > and Microcode Update. I tried updating with FreeDOS from SD Card, but it
>> > seems that my Bios does nut support booting from SD card. My Bios 
>> version
>> > is V1.12 this is the first release..
>>
>> Try a USB drive instead, maybe.
>>
>> > I have Qubes installed in Legacy Mode. Is it possible to switch it to 
>> UEFI
>> > mode? Because maybe it will boot much faster? The problem is i cannot 
>> turn
>> > off Secure Boot in my Bios by default, i am even not able to turn
>> > hyperthreading of, because the InsydeH20 stock bios looks like from a
>> > Kindergarden.
>>
>> Qubes will install itself the same way you booted the install media- 
>> legacy in this case. PCs from 2016 have iffy UEFI support, so if you're 
>> functioning under Legacy boot now I wouldn't change it. The boot times 
>> on both seem roughly equivalent, so that shouldn't be a major reason to 
>> switch.
>>
>> -- 
>> - don't top post
>> Mailing list etiquette:
>> - trim quoted reply to only relevant portions
>> - when possible, copy and paste text instead of screenshots
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/84678836-f8d8-470d-b89a-d1cf4d26ef7an%40googlegroups.com.


Re: [qubes-users] General setup questions from Noob

2021-02-21 Thread Alexander Reseneder
There is one thread about authy in the mailing list and it is from me.. :(

awokd schrieb am Sonntag, 21. Februar 2021 um 15:24:56 UTC+1:

> Alexander Reseneder:
> > Hello qubes-users,
> > 
> > im a Noob to Linux, but i wanna try it because it seems that it offers
> > great security advantages over a normal "bare metal" System or Windows.
> > 
> > However i have some problems, like setup my network printer properly, i
>
> Have you seen 
>
> https://github.com/Qubes-Community/Contents/blob/master/docs/configuration/network-printer.md
> ?
>
> > Also i ran into that problem that my Authy client installed over Snap
> > stopped working, terminal prints out that:
>
> IIRC, both Authy and Snap can be challenging to run under Qubes, but I 
> don't remember what it takes. Think others have managed though. Try 
> searching this mailing list for "Authy"?
>
> > Also i want to update my old InsydeH20 Bios, because it is the first
> > release version and my PC is from 2016, they were several ME Firewall
> > patches and also drivers for touchpad for linux were delivered etc. etc.
> > and Microcode Update. I tried updating with FreeDOS from SD Card, but it
> > seems that my Bios does nut support booting from SD card. My Bios version
> > is V1.12 this is the first release..
>
> Try a USB drive instead, maybe.
>
> > I have Qubes installed in Legacy Mode. Is it possible to switch it to 
> UEFI
> > mode? Because maybe it will boot much faster? The problem is i cannot 
> turn
> > off Secure Boot in my Bios by default, i am even not able to turn
> > hyperthreading of, because the InsydeH20 stock bios looks like from a
> > Kindergarden.
>
> Qubes will install itself the same way you booted the install media- 
> legacy in this case. PCs from 2016 have iffy UEFI support, so if you're 
> functioning under Legacy boot now I wouldn't change it. The boot times 
> on both seem roughly equivalent, so that shouldn't be a major reason to 
> switch.
>
> -- 
> - don't top post
> Mailing list etiquette:
> - trim quoted reply to only relevant portions
> - when possible, copy and paste text instead of screenshots
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/7f18390a-55d4-478c-bf83-02c4831178d8n%40googlegroups.com.


Re: [qubes-users] General setup questions from Noob

2021-02-21 Thread 'awokd' via qubes-users

Alexander Reseneder:

Hello qubes-users,

im a Noob to Linux, but i wanna try it because it seems that it offers
great security advantages over a normal "bare metal" System or Windows.

However i have some problems, like setup my network printer properly, i


Have you seen 
https://github.com/Qubes-Community/Contents/blob/master/docs/configuration/network-printer.md?



Also i ran into that problem that my Authy client installed over Snap
stopped working, terminal prints out that:


IIRC, both Authy and Snap can be challenging to run under Qubes, but I 
don't remember what it takes. Think others have managed though. Try 
searching this mailing list for "Authy"?



Also i want to update my old InsydeH20 Bios, because it is the first
release version and my PC is from 2016, they were several ME Firewall
patches and also drivers for touchpad for linux were delivered etc. etc.
and Microcode Update. I tried updating with FreeDOS from SD Card, but it
seems that my Bios does nut support booting from SD card. My Bios version
is V1.12 this is the first release..


Try a USB drive instead, maybe.


I have Qubes installed in Legacy Mode. Is it possible to switch it to UEFI
mode? Because maybe it will boot much faster? The problem is i cannot turn
off Secure Boot in my Bios by default, i am even not able to turn
hyperthreading of, because the InsydeH20 stock bios looks like from a
Kindergarden.


Qubes will install itself the same way you booted the install media- 
legacy in this case. PCs from 2016 have iffy UEFI support, so if you're 
functioning under Legacy boot now I wouldn't change it. The boot times 
on both seem roughly equivalent, so that shouldn't be a major reason to 
switch.


--
- don't top post
Mailing list etiquette:
- trim quoted reply to only relevant portions
- when possible, copy and paste text instead of screenshots

--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/14ecb3af-4e70-e58e-411a-903c5ae5bd3b%40danwin1210.me.