Re: [qubes-users] Trezor in Qubes
On Fri, Sep 03, 2021 at 07:54:56AM +, taran1s wrote: Thank you for the guide. I tried to follow the official guide on trezor wiki, abstaining from fedora a bit more, but still erroring. To your guide. The last 4 lines: copy to fedora-3x in fedora-3x sudo rpm -i /path/to/trezor.rpm ...are to be done in the fedora-3x template, right? Will it work on fedora-33-minimal too, or it needs to be full template? I don't know. All done, but I wasnt able to find any signed hash of the bridge or something and so I get this error: [user@fedora-33-min-trezor ~]$ sudo rpm -i trezor-bridge-2.0.27-1.x86_64.rpm warning: trezor-bridge-2.0.27-1.x86_64.rpm: Header V4 RSA/SHA256 Signature, key ID b9a02a3d: NOKEY package trezor-bridge-2.0.27-1.x86_64 does not verify: Header V4 RSA/SHA256 Signature, key ID b9a02a3d: NOKEY Weird. You have to install the Trezor verification key. I had to do this the first time I installed, but after re-imaging my system, it wasn't necessary on the most recent install, so I took the section out of my notes. Unfortunately I don't remember what the steps were to install the key! -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/YTPfjQCizVDm8sen%40danwin1210.me.
Re: [qubes-users] Trezor in Qubes
tetrahe...@danwin1210.me: On Thu, Aug 26, 2021 at 02:27:35PM +, 'taran1s' via qubes-users wrote: Hello all, I would like to start to use Trezor with my qubes. I would like to follow this guide here https://wiki.trezor.io/Qubes_OS. My intention is to use the Trezor HW wallet in a anon-whonix AppVm with Trezor Suite qube through Tor. I run qubes on X230 Nitropad. I would like to check if the guide to install the Trezor Bridge and Udev rules in the sys-usb (see the official Trezor guide) is advised by qubes community or is it good practice not to install anything in the sys-usb and instead install the packages (bridge, udev rules and suite) in the target anon-whonix AppVM. It should be fine. See my pull request for step by step instructions: https://github.com/Qubes-Community/Contents/pull/145 https://github.com/Qubes-Community/Contents/blob/3e1785a11e90b52e086fb8b3b246e5c2de7faca5/docs/common-tasks/setup-trezor-cryptocurrency-hardware-wallet.md Thank you for the guide. I tried to follow the official guide on trezor wiki, abstaining from fedora a bit more, but still erroring. To your guide. The last 4 lines: copy to fedora-3x in fedora-3x sudo rpm -i /path/to/trezor.rpm ...are to be done in the fedora-3x template, right? Will it work on fedora-33-minimal too, or it needs to be full template? All done, but I wasnt able to find any signed hash of the bridge or something and so I get this error: [user@fedora-33-min-trezor ~]$ sudo rpm -i trezor-bridge-2.0.27-1.x86_64.rpm warning: trezor-bridge-2.0.27-1.x86_64.rpm: Header V4 RSA/SHA256 Signature, key ID b9a02a3d: NOKEY package trezor-bridge-2.0.27-1.x86_64 does not verify: Header V4 RSA/SHA256 Signature, key ID b9a02a3d: NOKEY -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/202fb74d-009e-249f-c4f1-86e3b92834d9%40mailbox.org.
Re: [qubes-users] Trezor in Qubes
tetrahedra via qubes-users: On Thu, Aug 26, 2021 at 02:27:35PM +, 'taran1s' via qubes-users wrote: Hello all, I would like to start to use Trezor with my qubes. I would like to follow this guide here https://wiki.trezor.io/Qubes_OS. My intention is to use the Trezor HW wallet in a anon-whonix AppVm with Trezor Suite qube through Tor. I run qubes on X230 Nitropad. I would like to check if the guide to install the Trezor Bridge and Udev rules in the sys-usb (see the official Trezor guide) is advised by qubes community or is it good practice not to install anything in the sys-usb and instead install the packages (bridge, udev rules and suite) in the target anon-whonix AppVM. It should be fine. See my pull request for step by step instructions: https://github.com/Qubes-Community/Contents/pull/145 https://github.com/Qubes-Community/Contents/blob/3e1785a11e90b52e086fb8b3b246e5c2de7faca5/docs/common-tasks/setup-trezor-cryptocurrency-hardware-wallet.md Thank you for the advice. You mention on github to verify the bridge, but I cannot find any signed hash or anything for Trezor bridge and udev rules. Can you point me to it? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/20791bd4-38c6-28ff-d721-8440b6e00786%40mailbox.org.
Re: [qubes-users] Trezor in Qubes
On Thu, Aug 26, 2021 at 02:27:35PM +, 'taran1s' via qubes-users wrote: Hello all, I would like to start to use Trezor with my qubes. I would like to follow this guide here https://wiki.trezor.io/Qubes_OS. My intention is to use the Trezor HW wallet in a anon-whonix AppVm with Trezor Suite qube through Tor. I run qubes on X230 Nitropad. I would like to check if the guide to install the Trezor Bridge and Udev rules in the sys-usb (see the official Trezor guide) is advised by qubes community or is it good practice not to install anything in the sys-usb and instead install the packages (bridge, udev rules and suite) in the target anon-whonix AppVM. It should be fine. See my pull request for step by step instructions: https://github.com/Qubes-Community/Contents/pull/145 https://github.com/Qubes-Community/Contents/blob/3e1785a11e90b52e086fb8b3b246e5c2de7faca5/docs/common-tasks/setup-trezor-cryptocurrency-hardware-wallet.md -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/YSjVraLa/O2lQYOX%40danwin1210.me.
