Hi,
I have been trying to find a solution to this issue, but have not been able
to so !
I am trying to use sapply on the function getSYMBOL,
an extract from the list is:
test.goP[13:14]
$`GO:050`
IEA IEA IEA IEA TAS TAS TAS
IEA
5270753 5720725 1690128
Hi Douglas,
Thanks for your helpful response. I've commented on some of the points
you raised below:
Although this may not be helpful for your immediate goal, storing and
manipulating data of this size and complexity (and, I expect, cost for
collection) really calls for tools like relational
Sunando Roy wrote:
Hi Duncan,
Thanks for your help. I changed the P but the output that I get is not
what I expect. The form gets aborted without any actual output. I get
the same result with
postForm(http://www.expasy.ch/tools/protscale.html;)
That URL (...protscale.html) is the
Daniel Nordlund wrote:
. . .
This is just a quick follow-up to my previous post. Based on Prof. Ripley's
response I went back and looked at the SAS log file and reread the RODBC help
pages. The problem of writing a SAS dataset was solved by setting
colQuote=NULL in the call to the
On Feb 12, 2010, at 6:48 PM, Nora Kozloff wrote:
This will probably seem very simple to experienced R programmers:
I am doing a snp association analysis and am at the model-fitting
stage. I
am using the Stats package's drop1 with the following code:
##geno is the dataset
## the dependent
On Feb 13, 2010, at 3:18 AM, Sahil Seth wrote:
Hi,
I have been trying to find a solution to this issue, but have not
been able
to so !
I am trying to use sapply on the function getSYMBOL,
The annotate package is from BioConductor.
an extract from the list is:
test.goP[13:14]
I am using pyramid.plot() from the plotrix package.
I have something like this
xy.pop-dados$masfr
xx.pop-dados$femfr
#agelabels-dados$femlab
xycol-color.gradient(c(0,0,0.5,1),c(0,0,0.5,1),c(1,1,0.5,1),11)
2010/2/11 david.luck...@industry.nsw.gov.au:
Does anyone have a work-around for a failed installation of this package?
library(xlsReadWrite)
...
xls.getshlib()
However, the xls.getshlib() command fails with this error:
(For the record) It probably was a corporate firewall problem.
Apart
On 02/13/2010 06:21 AM, David Winsemius wrote:
On Feb 13, 2010, at 3:18 AM, Sahil Seth wrote:
Hi,
I have been trying to find a solution to this issue, but have not been
able
to so !
I am trying to use sapply on the function getSYMBOL,
The annotate package is from BioConductor.
an
Hi all.
I have a problem with adding 1 and very small numbers
ex:
p=1e-49
1+p
[1] 1
My problem comes from some values of x for the value:
1-exp(-sum((x-1/sqrt(3))^2))
the return values are always equivalent.
Please help
Thanks
--
View this message in context:
On Feb 13, 2010, at 10:09 AM, Martin Morgan wrote:
On 02/13/2010 06:21 AM, David Winsemius wrote:
On Feb 13, 2010, at 3:18 AM, Sahil Seth wrote:
Hi,
I have been trying to find a solution to this issue, but have not
been
able
to so !
I am trying to use sapply on the function getSYMBOL,
On 02/13/2010 07:17 AM, David Winsemius wrote:
On Feb 13, 2010, at 10:09 AM, Martin Morgan wrote:
On 02/13/2010 06:21 AM, David Winsemius wrote:
On Feb 13, 2010, at 3:18 AM, Sahil Seth wrote:
Hi,
I have been trying to find a solution to this issue, but have not been
able
to so !
I am
On 02/11/2010 08:03 PM, AMBUJ wrote:
Hi,
Thank you Viviana for the description to create probeAnno object.
The below link was very helpful:
http://svitsrv25.epfl.ch/R-doc/library/Ringo/html/probeAnnoClass.html
This is just the help page for one of Ringo's classes. It's
On Sat, Feb 13, 2010 at 2:17 PM, cjmr cjregu...@gmail.com wrote:
p=1e-49
1+p
[1] 1
Try this:
source(http://r-bc.googlecode.com/svn/trunk/R/bc.R;)
p - bc(1e-49)
p
[1] .1
1+p
[1] 1.1
You might
On Fri, Feb 12, 2010 at 4:25 PM, blue sky bluesky...@gmail.com wrote:
?'`' shows the following:
Single and double quotes delimit character constants. They can be
used interchangeably but double quotes are *preferred* (and character
constants are printed using double quotes), so single quotes
Check out ?expm1
On Sat, Feb 13, 2010 at 9:17 AM, cjmr cjregu...@gmail.com wrote:
Hi all.
I have a problem with adding 1 and very small numbers
ex:
p=1e-49
1+p
[1] 1
My problem comes from some values of x for the value:
1-exp(-sum((x-1/sqrt(3))^2))
the return values are always
I took a shot at getting assymetric lableling but it's by no means
perfect. You really, really ,really, should learn to offer data with
dput. See below:
On Feb 13, 2010, at 9:27 AM, Orvalho Augusto wrote:
I am using pyramid.plot() from the plotrix package.
I have something like this
This is good!
Yes I must learn about dput.
Thank you
Caveman
On Sat, Feb 13, 2010 at 6:57 PM, David Winsemius dwinsem...@comcast.net wrote:
I took a shot at getting assymetric lableling but it's by no means perfect.
You really, really ,really, should learn to offer data with dput. See
I still have not received a copy of the esp package, so I don't know what
exactly you tried, or what the results are.
The following works for me and seems to fit your description, but without code
and details of the results and how they differ from what you expect, we can
only guess.
x1 -
Please give me just a reference where I can find something useful.
In summary, I need to :
- find the median of each row of a matrix
- create a new matrix with each value in the first matrix divided by the median
of its row
- if a value a in the second matrix is 1, I need to substitute it
The fact that A and B have dimensions indicates that they are more than simple
vectors. It appears that when you create D you are subsetting columns rather
than rows, try:
D - C[which(C %in% A ==FALSE),] # note the ,
Hope this helps,
--
Gregory (Greg) L. Snow Ph.D.
Statistical Data Center
Some places to start
apply()
sweep()
and any of the good introductory guides to R available online.
For finding R material, it's vastly easier to use the custom search engine
at www.rseek.org than to wander aimlessly around google trying to
find things with R in them.
We'd be happy to give more
Hi, I havw some porblem in R and i need your help.
I have this vector and I want to change it to date.
for example G=[05 12 2008]
or g=[2]
f=[3]
y=[2208]
__
R-help@r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/r-help
Hussain Abusaaq hia05 at fsu.edu writes:
I have this vector and I want to change it to date.
for example G=[05 12 2008]
or g=[2]
f=[3]
y=[2208]
Something like as.Date(paste(rev(G),collapse=-))
__
R-help@r-project.org mailing list
1) I need to plot a legend containing the mathematical symbol greater-
than-or-equal sign.
And I want the text to start with that symbol.
plot(110, 0.8)
categories - expression(blank = 85, 84.9 - 80, 79.9 - 75, 74.9 - 70,
69.9 - 65, 64.9 - 60, blank 60)
legend(110, 0.8, categories, lty=1:7,
The following variables have the following significant relationships (x is the
explanatory variable): linear, cubic, exponential, logistic. The linear
relationship plots without any trouble.
Cubic is the 'best' model, but it is not plotting as a smooth curve using the
following code:
On Feb 13, 2010, at 1:13 PM, Mark Heckmann wrote:
1) I need to plot a legend containing the mathematical symbol
greater-than-or-equal sign.
And I want the text to start with that symbol.
plot(110, 0.8)
categories - expression(blank = 85, 84.9 - 80, 79.9 - 75, 74.9 -
70, 69.9 - 65, 64.9 -
On Feb 13, 2010, at 1:45 PM, David Winsemius wrote:
On Feb 13, 2010, at 1:13 PM, Mark Heckmann wrote:
1) I need to plot a legend containing the mathematical symbol
greater-than-or-equal sign.
And I want the text to start with that symbol.
plot(110, 0.8)
categories - expression(blank =
On Sat, Feb 13, 2010 at 5:39 PM, Zoppoli, Gabriele (NIH/NCI) [G]
zoppo...@mail.nih.gov wrote:
Please give me just a reference where I can find something useful.
To complement Sarah's suggestions, a good place to start is Quick-R [1].
Liviu
[1] http://www.statmethods.net/stats/descriptives.html
Rhonda Reidy wrote:
The following variables have the following significant relationships (x is
the explanatory variable): linear, cubic, exponential, logistic. The
linear relationship plots without any trouble.
Cubic is the 'best' model, but it is not plotting as a smooth curve using
On Feb 13, 2010, at 1:35 PM, Rhonda Reidy wrote:
The following variables have the following significant relationships
(x is the explanatory variable): linear, cubic, exponential,
logistic. The linear relationship plots without any trouble.
Cubic is the 'best' model, but it is not plotting
Zoppoli, Gabriele (NIH/NCI) [G] zoppolig at mail.nih.gov writes:
Please give me just a reference where I can find something useful.
The others are right that rather than randomly googling, you should bite
the bullet and sit down for a couple of hours with some introductory
material on R (a
Rhonda:
As David points out, a cubic fit is rather speculative. I think that
one needs to distinguish two situations: 1) theoretical justification
for a cubic model is available, or 2) you're dredging the data for
the best fit. Your case is the second. That puts you in the realm
of EDA
hi everyone.
i am dealing on a zoo-class object.i am aware of the 'min' and 'max' function
to get the minimum and the maximum values.getting these maximum and minimum
values is ont thing.but, how to get the (zoo) dates these values occur ?
in fact, in analysing a time series i am interested in
Hello,
I have the following data frame, using lattice and qqmath, how do I display the
quantile plot (e.g distribution = qunif), but highlight the f==TRUE and f==FALSE
differently?
library(lattice)
pp - function(n) ((1:n)-0.5)/n
x=data.frame(x=runif(20),f=sapply(runif(20),function(r) r0.5))
I
Try this:
library(zoo)
set.seed(1)
z - zoo(rnorm(100), as.Date(0) + 1:100)
mx - z[which.max(z)]; mx
1970-03-03
2.401618
coredata(mx)
[1] 2.401618
time(mx)
[1] 1970-03-03
On Sat, Feb 13, 2010 at 3:39 PM, Edouard Tallent tallen...@lycos.com wrote:
hi everyone.
i am dealing on a zoo-class
Hi
Im currently trying to plot my NMDS data together with fitted variables
(envfit funct) on an ordination plot. The plot function shows two
displays=sites and sp. I was wondering how to plot it so that the sites
come up as different points for different sites but the species come up as
actual
Brian Joiner, my teacher and insightful guide to the world of applied
statistics when I was a student, succinctly summarized this discussion by:
Even the data aren't sufficient.
(This is an inside joke for statisticians).
Cheers,
Bert
Bert Gunter
Genentech Nonclinical Statistics
Thanks Dan. Yes that was very helpful. I didn't see the change from '*' to
'+'.
Seems like when I put * it means - interaction when I put + it's not an
interaction.
Is it correct to assume then that...
When I put + R evaluates the following equation:
Y-Hat = b0 + b1X1 + b2X2 + . . . bkXk + ·
?formula
Bert Gunter
Genentech Nonclinical Statistics
-Original Message-
From: r-help-boun...@r-project.org [mailto:r-help-boun...@r-project.org] On
Behalf Of Something Something
Sent: Saturday, February 13, 2010 1:24 PM
To: Daniel Nordlund
Cc: r-help@r-project.org
Subject: Re: [R] lm
Saptarshi Guha wrote:
Hello,
I have the following data frame, using lattice and qqmath, how do I display the
quantile plot (e.g distribution = qunif), but highlight the f==TRUE and f==FALSE
differently?
library(lattice)
pp - function(n) ((1:n)-0.5)/n
[cc'ing back to r-help]
You need to get the separator right: you specify slashes below where
your date is space-separated
as.Date(02 03 2008, format=%m %d %Y)
note that the solution I gave you below assumed that your dates were
in d/m/Y order (since you didn't specify). You will have to
I tried..
mod = lm(Y ~ X1*X2*X3, na.action = na.exclude)
formula(mod)
This produced
Y ~ X1 * X2 * X3
When I typed just mod I got:
Call:
lm(formula = Y ~ X1 * X2 * X3, na.action = na.exclude)
Coefficients:
(Intercept) X11 X21 X31 X11:X21 X11:X31
Aisyah aisyah.faruk at ioz.ac.uk writes:
Hi
Im currently trying to plot my NMDS data together with fitted variables
(envfit funct) on an ordination plot. The plot function shows two
displays=sites and sp. I was wondering how to plot it so that the sites
come up as different points for
On Feb 13, 2010, at 5:03 PM, Something Something wrote:
I tried..
mod = lm(Y ~ X1*X2*X3, na.action = na.exclude)
formula(mod)
This produced
Y ~ X1 * X2 * X3
When I typed just mod I got:
Call:
lm(formula = Y ~ X1 * X2 * X3, na.action = na.exclude)
Coefficients:
(Intercept)
You can find out the model matrix like this where we use the builtin
data frame CO2 to illustrate:
fo - uptake ~ Treatment * Type
mod - lm(fo, CO2); mod
mm - model.matrix(fo, CO2)
View(mm)
On Sat, Feb 13, 2010 at 5:03 PM, Something Something
mailinglist...@gmail.com wrote:
I tried..
mod =
From your question it is difficult to determine what sort of tutoring you
are expecting.
The kind of tutoring you are providing is definitely helpful :)
I guess I should quickly explain what I am trying to accomplish. I have
been a computer scientist for quite a few years, but I studied
It seems to me that your question is more about the econometrics than about
R. Any introductory econometric textbook or compendium on econometrics will
cover this as it is a basic. See, for example, Greene 2006 or Wooldridge
2002.
Say X is your data matrix, that contains columns for each of the
Dear Anton,
4Mb is not a lot of data. A Gb still wouldn't be that troublesome in a flat
file. Your data can be migrated to a relational database at a future point.
Sincerely,
KeithC.
-Original Message-
From: Anton du Toit [mailto:atdutoitrh...@gmail.com]
Sent: Saturday, February 13,
Dear Something,
I think you have no hope of completing this project without going back
to an introductory regression text. The two models you listed (Y-Hat =
b0 + b1X1 + b2X2 + . . . bkXk + · · · + bkXk) and (Y-Hat = b0 + b1X1 +
b2x2 + ... + bkXk + b12 X12+ b13 X13 + + c) are identical
Is there any R package which implements non-linear dimensionality reduction
(LLE, ISOMAP, GTM, and so on) and/or intrinsic dimensionality estimation ?
Thank you,
Maura
tutti i telefonini TIM!
[[alternative HTML version deleted]]
__
S Programming by Venables and Ripley (page 78) has the example listed
at the end of this email. However, I get the following error when I
try the example. I don't understand the descriptions of NextMethod on
its help page. Could somebody let me know how to fix the error of this
example?
test(x)
blue sky bluesky315 at gmail.com writes:
S Programming by Venables and Ripley (page 78) has the example listed
at the end of this email. However, I get the following error when I
try the example. I don't understand the descriptions of NextMethod on
its help page. Could somebody let me know how
-Original Message-
From: Frank E Harrell Jr [mailto:f.harr...@vanderbilt.edu]
Sent: Saturday, February 13, 2010 5:49 AM
To: Daniel Nordlund
Cc: r-help@r-project.org
Subject: Re: [R] SAS and RODBC
Daniel Nordlund wrote:
. . .
This is just a quick follow-up to my previous
I am trying to perform goodness of fit test using R. I am using this website
http://wiener.math.csi.cuny.edu/Statistics/R/simpleR/stat013.html for help.
However, I am unable to carry out the test successfully. My code follows. It is
taken from the website just mentioned.
55 matches
Mail list logo