Hello Heikki,
you're right.
It works for me using the %{OuterRequest:Calling-Station-Id} instead of
the %{Calling-Station-Id} form.
Thank you very much.
Regards
Fabio
On 07/12/2011 11:59 PM, Heikki Vatiainen wrote:
On 07/12/2011 06:57 PM, Fabio Ciampi wrote:
Hello Fabio,
I attach the
On 07/11/2011 05:53 PM, Fabio Ciampi wrote:
Hello Fabio
I have in my radius.cfg file:
AuthLog FILE
Identifier eduroam-isti-log
Filename %L/%Y%m%d-isti-auth.log
LogSuccess 1
LogFailure 1
SuccessFormat %d/%m/%Y -- %H:%M:%S -- DOMAIN: %R :AUTHENTICATION %r \
On 07/12/2011 06:57 PM, Fabio Ciampi wrote:
Hello Fabio,
I attach the new configuration file that I wrote.
As you can see my configuration file have two different handler. One for
the outer and one for the inner authentication.
I can use radpwtst with the command:
perl radpwtst
Hi Vadim,
It's either a Cisco or a telco issue, Radiator has no control over this.
Cheers,
Ingvar
-Original Message-
From: Vadim Isakov [mailto:[EMAIL PROTECTED]]
Sent: den 5 september 2001 05:03
To: [EMAIL PROTECTED]
Subject: (RADIATOR) Calling-Station-Id
Hi all,
We are
Hello Vadim -
Have a look at a trace 4 debug from Radiator to see exactly what
attributes are being sent in the radius requests sent by the Cisco.
You can also look at a debug on the Cisco to see what is being sent.
hth
Hugh
At 12:33 +0930 01/9/5, Vadim Isakov wrote:
Hi all,
We are
Hi Hugh,
Thank you for your reply. As I see from debugs Cisco sends exactly what
Radiator requests.
The question is simpler now. How can I get Radius request Calling-Station-Id
attribute from Cisco router?
Thank you
Vadim
Radius:
Attributes:
NAS-IP-Address = 203.24.77.215
On Thu, Sep 06, 2001 at 10:44:23AM +0930, Vadim Isakov wrote:
Thank you for your reply. As I see from debugs Cisco sends exactly what
Radiator requests.
The question is simpler now. How can I get Radius request Calling-Station-Id
attribute from Cisco router?
It's in the circuit config - in
Hello Deepak -
On Thu, 16 Nov 2000, Deepak Shrestha wrote:
hi,
is it possible to have calling-station-id and called-station-id inserted
in the DBM SessionDatabase so that it can be viewed from radwho.cgi?
any help would be appreciated.
The only way you can do this is by modifying the code
