Hi Fernando,
Fernando Martin wrote:
Hi Mike,
Thank you. Now my radiator 2.13.1 is working.
I have several questions about the progress to give a dinamic IP:
1- If I configure this users file
fer User-Password = "fer"
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = 255.255.255.254, -
why do you wish to configure this invalid IP address
Framed-IP-Netmask = 255.255.255.255,
Framed-Routing = None,
Framed-MTU = 1500,
Framed-Compression = Van-Jacobson-TCP-IP
Then fer get an IP from the NAS server ( My NAS has a pool defined)
Is it right? Some times it works but others does not. Why?
This is not the poper way, see below
2- If I use:
fer User-Password = "fer"
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Netmask = 255.255.255.255,
Framed-Routing = None,
Framed-MTU = 1500,
Framed-Compression = Van-Jacobson-TCP-IP
And use FramedGroupBaseAddress 193.146.120.120.
Then fer get an IP But not 120 + Port . I think this is a problem with my
NAS. It has two PRIs
If I do not use # FramedGroupBaseAddress 193.146.120.120.the system get me
an IP but I do not know how, I think the NAS..
3- FinallyI think the best solution to my problems is that I want to give a
dinamic IP from a pool defined on the Radiator configuration. How to do
that? How and where to define a pool? and how to configure the users profile
to get it? Could I define several pools?
You do this with pseudo user entries, and this is different for the
special NAS.
see this example for a Ascend NAS:
#- snipp -
pools-nasname Password = "ascend", Service-Type = Outbound-User
Ascend-IP-Pool-Definition = "1 172.16.1.1 240"
#-
#
DEFAULT Auth-Type = System
Framed-Protocol = PPP,
Framed-IP-Netmask = 255.255.255.255,
Framed-Routing = None,
Ascend-Assign-IP-Pool = 1
#--
#- snipp -
Annotation: pools-nasname: nasname must be replaced by the system name of
your nas. Turn the trace level in the radiator.cfg to 4 und look for what
pools-xx your NAS is asking after a reset or refresh of the remote config.
The line Ascend-IP-Pool-Definition = "1 172.16.1.1 240" is again
Vendor specific (see your dictionary) and mens in this example:
Poll Number 1, Base Address 172.16.1.1, and 240 IP Addresses
starting from 172.16.1.1 to 172.16.1.240
The DEFAULT entry has the reply item with:
Ascend-Assign-IP-Pool = 1
1 means her, give the user a number of IP-Pool number 1.
If you need more pools, the pseudo entry would look
like the following 3 lines, ans so on ansd so on:
(the first line last line has no comma at the end!)
(the whitespace in klines after the first line are important)
pools-nasname Password = "ascend", Service-Type = Outbound-User
Ascend-IP-Pool-Definition = "1 172.16.1.1 240",
Ascend-IP-Pool-Definition = "2 172.16.10.100 15"
Look in your vendor dokumentation.
regards
Charly
===
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
