that were contributed on the ML that might suit you for the immediate.
> Thanks,
>
> GTG
>
> On Wednesday, March 25, 2015 12:14 EDT, heasley wrote:
> Many have asked for this and it will probably be the primary addition to
> rancid 3.3, but I do not have a use for it,
Wed, Jun 23, 2021 at 08:34:25AM +, Henrik Cednert (Filmlance):
> Hi there
>
> trying to get Rancid to work with a Dell N3048P. I'm running into probably
> the very same issues as here.
> https://shrubbery.net/pipermail/rancid-discuss/2015-June/008426.html
>
> During troubleshooting I have
Thu, May 27, 2021 at 04:57:51PM +, Chris Davis:
> I don’t use git. Just downloaded a million years ago and compiled, and just
> keep updating manually. I don’t know much about using git. Aware of it, but
> don’t use it at all.
yeah, afaik, cvs does not have a mv. you can do it manually;
Thu, Mar 18, 2021 at 08:15:47AM -0600, Kevin Morales:
> Hi, How can I do a hierarchy folder for backup configurations using Websvn?
> for example:
>
> +ROUTER
>+ CISCO
> +SW
> +FW
>+ Juniper
> +SW
> +FW
if you split
Fri, Apr 09, 2021 at 05:07:33PM +1200, Daniel Kerse:
> Speaking of which, how are people maintaining their mailing lists for
> Rancid these days? Is majordomo still best of breed here? I looked at it a
> while ago but my rancid servers can’t receive email, only send. So I don’t
> think that’s
Thu, Apr 08, 2021 at 12:34:21PM -0400, Dan Anderson:
> If you created an additional set of groups, you could do a group per campus
> and send the reports/diffs for each group or groups to different e-mail
> addresses based on the entries in your /etc/aliases file. That's 100%
> supported and
Thu, Aug 12, 2021 at 04:14:21PM +0200, Bjørn Skobba:
> However, our Layer2 dude pointed out the os also was a bit cisco-ish,
> so I tried the cisco device type (ios module) and that worked fine as
> well . To make it more tailored to these switches I fiddled a bit with
> stuff I'm not really able
Tue, Sep 07, 2021 at 06:28:39PM +, Adam Thompson:
> I remember this being discussed several times here - Palo Alto's PANOS only
> emits JSON-formatted config when you run "show config running", which cannot
> be used to restore the device from scratch.
>
> You can (at least as of v9.x)
Wed, Aug 11, 2021 at 01:48:06PM +0200, Bjørn Skobba:
> On Sun, Aug 8, 2021 at 5:45 PM heasley wrote:
> >
> > Sun, Aug 08, 2021 at 02:11:22PM +0200, Bjørn Skobba:
> > > On Thu, May 7, 2020 at 10:54 PM Troy Beisigl wrote:
> > > >
> > > > I was tryi
Wed, Jul 28, 2021 at 01:49:01PM -0500, Chris Boyd:
> I was going to point to the ancient one I wrote for Daemon News, but it’s
> long gone apparently. This one looks pretty good.
>
> https://uberbruco.wordpress.com/2009/07/09/rancid-on-freebsd/
>
> Once installed, the configuration is pretty
Fri, Oct 15, 2021 at 02:59:01PM +, Mick O'Donovan:
> rancid@rancid-staging:~/bin$ diff rancid zperancid
> 140a141,143
> > # I don't care if it sees "exit"
> > $clean_run = 1;
> >
>
> ^^^ It was recommended to me several weeks back to make this change but I
> can't for the life of me remember
Fri, Oct 15, 2021 at 01:39:18PM -0700, Michael Ducharme:
> Hello,
>
> I had a look at your patch and I'm not sure that would fix the issue. Also
> show-sensitive only works with v7 and above and throws an error on RouterOS
> v6.
>
> Someone on the MikroTik forums found that there is no longer a
Mon, Oct 11, 2021 at 06:28:39PM -0700, Michael Ducharme:
> Hello,
>
> I just wanted to let you know - on the MikroTik forum I am seeing reports
> that RANCID is no longer working to back up RouterOS versions 6.49 and
> 7.1rc3 and 7.1rc4. The commands still run and there were no documented
>
Tue, Sep 28, 2021 at 06:58:33AM +, simon ben:
> Dear All,
> I have rancid running and also installed viewvc and all working great and
> backing up switches and routersNow I just had one query about restoring the
> backed up config
> if there is a router or switch failure and is replaced with
Thu, Sep 30, 2021 at 05:53:51AM +, simon ben:
> just wanted to know regarding the alternate way mentioned by you after doing
> a minimum config for the cisco switch or router for network connectivity as
> guess it would be a better option
> Is it possible to restore the config from viewvc
Fri, Dec 03, 2021 at 10:02:56AM -0600, Chris Wopat:
> On Fri, Dec 3, 2021 at 9:49 AM heasley wrote:
> >
> > if a separate group is used, a group-specific rancid.conf can be used
> > to over-ride the global config. /pathto//rancid.conf,
> > next to the group's router.d
Mon, Dec 06, 2021 at 10:46:39AM +0100, BASSAGET Cédric:
> Hello,
> I have a problem when trying to rancid h3c switches :
>
> rancid@jersey:~$ PATH=$PATH:/usr/local/rancid/bin ./bin/rancid -d -t h3c
> sw-hp-hits-stack
> loadtype: device type h3c
> loadtype: found device type h3c at
>
Fri, Dec 31, 2021 at 11:31:50PM +, Tim Warnock:
> Is this no longer working on 7.1+? https://github.com/haussli/rancid/issues/31
https://github.com/haussli/rancid/issues/32
This is the commit that I expect will fix the collection:
Sat, Oct 16, 2021 at 05:35:16PM -0700, Michael Ducharme:
> Hello,
>
> Unfortunately, that does not fix it, and neither does "network" or "dumb".
> Something that I might suggest is that you install the free CHR (cloud
> hosted router) as a VM rather easily, as long as you have a hypervisor, and
>
Tue, Nov 02, 2021 at 03:56:58PM +0300, Vacheslav:
> ### Cisco Fabric Ucs
> cisco-ucs;script;rancid -t cisco-ucs
> cisco-ucs;login;clogin
> cisco-ucs;module;nxos
> cisco-ucs;inloop;nxos::inloop
> cisco-ucs;command;nxos::ShowVersion;show version
> cisco-ucs;command;nxos::WriteTerm;show
Sun, Oct 31, 2021 at 11:36:14PM +0100, Geert Jan de Groot:
> Hi,
>
> Perhaps I should not report this because the current version of Rancid
> is 3.1, but the version in FreeBSD pkg is still 2.3.8. Anyway..
>
> With the upgrade to FreeBSD 13.0, this old version of Rancid broke.
> Root cause
Tue, Dec 07, 2021 at 05:34:27AM +, simon ben:
> Dear All,
> Btw appreciate and thanks for the reply from Heasley and UGO
> As I mentioned below I am trying to backup my fortigate 1000D ( sorry for the
> typo mistake in my earlier email as 100D) so to test before I edit the
Tue, Dec 07, 2021 at 08:15:34AM +0100, BASSAGET Cédric:
> hi Heasley,
> I don't understand why you talk about alteon.
alteon is a rancid script that is not yet a perl module, like your h3crancid
> tried to add that in rancid.types.conf
>
> # HP Comware
h3c;alias;h3crancid
h
Fri, Dec 03, 2021 at 08:13:22AM -0600, Chris Wopat:
> Is there any way to pass these config settings to this separate cron
> entry without modifying rancid.conf? The config file looks to be
> setting environment variables but I'm unsure if a local environment
> variable would override
Wed, Dec 15, 2021 at 09:31:24AM -0500, vom513:
> I have a Cisco IOS AP (i.e. older standalone/autonomous). Every once in a
> while (I don’t see a time pattern here), RANCID sees a change of a file in
> flash.
>
> The file’s name is the PCB serial number of the AP:
>
> - !Flash: 8 -rwx
Wed, Dec 15, 2021 at 03:12:55PM -0500, vom513:
> > I have an 891 w/ an embedded ap802; it does not do this. Maybe you have not
> > told us enough, but rancid just reports what it receives. So, the file is
> > changing. That could be a cisco bug (such as DE's debugging left in a
> > production
Wed, Jan 12, 2022 at 09:40:08PM +, Daniel Thomas:
> In order to get the "./rancid -d -t " to work correctly for me I had
> to edit the
> following two lines in "rancid.types.conf":
> infinet;script;rancid -t infinet
> infinet;login;infilogin
> So that they read as:
>
run not found
> devicename: found_end is false
> !sed pba version: none
>
> Did you (or anyone else) ever get further than this with ZPE backups?
If one of you shares the raw file and the code, i can try to help resolve
that failure.
> On Fri, 15 Oct 2021, Mick O'Donovan wrote:
&
Mon, Feb 28, 2022 at 11:40:06AM -0800, Troy Beisigl:
> Hello everyone,
>
> I have been seeing this happen every time rancid runs on one ASA only. It is
> a Cisco FPR running ASA image 9.14(2)15. Has anyone ran into this and is
> there a patch?
>
> !Flash: disk0: 805306526 drwx 4096
Mon, Jan 31, 2022 at 08:10:25AM +, simon ben:
> so i realized that after i had restored the backup i had to create user and
> assigned a password for him
> So just wanted to know if this the right practice i need to go about or do i
> need to follow another way
There are 2 ways to handle
Tue, Jan 18, 2022 at 08:14:33PM +, simon ben:
> Dear All,
> I have the below
> Rancid ver 3.9 running on Centos 8.4 backing up with no issues Cisco Switches
> ,Routers and Forgate Firewall I wanted to backup a new HP router but the
> config file is emptyI am able to login into the router
Thu, Jan 06, 2022 at 10:23:44PM +, Daniel Thomas:
> Hi
>
>
>
> I have been working on getting RANCID to collect configuration information
> from some equipment that is made by InfiNet. So far I have been unable to
> locate any similar work performed previously and so made a start on getting
Wed, Jan 05, 2022 at 09:05:51AM -0600, Karl:
> Good morning,
>
> One of the sites where I run RANCID has Extreme switches and also has
> the ExtremeCloud IQ web-based management. The management platform adds
> a user account called hivemanager, and it cycles (or at least
> re-encrypts) the
Thu, Jan 13, 2022 at 02:15:34PM -0600, Karl:
> I think that did it. I have this in the diff now from each one.
>
> - create account admin hivemanager encrypted
> "$x$xx$xxx"
> + # create account admin hivemanager
>
Toll! Thanks for
Tue, Apr 05, 2022 at 08:05:32AM +, simon ben:
> Dear All,
> I have a the below working perfect with no isuesrancid 3.9 with viewvc repo
> version 1.3.0attached my current CVS root
> Now Remote-Sites is a new folder I created and i need to create
> subdirectories ( or folders )
> under this
Thu, Apr 14, 2022 at 07:26:09AM +, simon ben:
> Dear All,
> I had sent an email earlier on the issue of creating sub folders under the
> CVS roothere below is my config file .. rancid.con
> LIST_OF_GROUPS="Switches Routers DataCentre Firewall BldgA-Switches
>
Thu, Aug 24, 2023 at 01:42:58PM +, Zakir Hossain:
> Hi,
> I think we are trying wrong login script (fnlogin) for extreme switch but
> (xlogin) doesn't work because it is for exos and the VSP 7400 switches
> whereas we're trying to back up of the following model switch:
> VSP Operating System
Thu, Aug 31, 2023 at 02:52:43PM +0530, Anwar Durrani:
> Hi Ugo,
>
> Earlier My config file /etc/rancid/rancid.type.base looks like
If you wish to alter a rancid device type, you should create your own name
that does not conflict with one in rancid.types.base, and place it in
rancid.types.conf.
Mon, Oct 16, 2023 at 05:31:40PM +, Elliot Wilen:
> HI, all,
>
> I've been working on a .pm file for our Aruba Instant AP setup (which I'm
> defining as arubaos in the types file), using foundry.pm as a starting point,
> but whenever I run rancid -d -t arubaos , I get "End of run not
>
Tue, Oct 31, 2023 at 08:41:39AM +, simon ben:
> Dear All,
> I did the following to upgrade rancid from rancid 3.9 to 3.13
> downloaded the new tar file and unzip in /home/rancid/tar/rancid-3.13 and i
> try to run configure it gives me the below error
> ./configure --prefix=/usr/local/rancid
Sun, Oct 29, 2023 at 05:48:11AM +, simon ben:
> Dear All,I have been running rancid for quite sometime an excellent toll and
> I need to upgrade
> current version is rancid 3.9need to upgrade to 3.13
> Appreciate your kind help and advice
> If any one can share a link explaining upgrade
Thu, Sep 14, 2023 at 12:03:04PM -0500, Daniel Schmidt:
> Anybody done a patch to get rid of something like this on ios-xr asr?
>
> - !Flash: harddisk: -rw-r--r--. 1 8388943 Sep 13 00:25 nvgen_bkup.log
> + !Flash: harddisk: -rw-r--r--. 1 8388943 Sep 14 00:15 nvgen_bkup.log
this should ready be
Fri, May 27, 2022 at 01:32:20PM -0700, Randy Bush:
> PROMPT MATCH: ran...@r2.sea#
> HIT COMMAND:ran...@r2.sea# show version
> In ShowVersion: ran...@r2.sea# show version
> HIT COMMAND:ran...@r2.sea# show hardware | notab
> In ShowVersion: ran...@r2.sea# show hardware | notab
looks like
Fri, Jul 01, 2022 at 11:33:42AM -0700, Scott Larsen:
> > How can I insert Dell switch into Rancid?
>
> I capture my C9010 chassis units and MXL-10/40GbE blade switches by using
> model type "force10" in the router.db.
afaik most dell are just OEMs, so various modules are used. I've commented
Tue, Jul 05, 2022 at 09:52:22AM -0500, Adam Korab:
> Working on a problem where spurious diffs are received by
> rancid (3.13) when executing against a VyOS VM (v1.3.1-S1).
>
> Given the order of commands here:
>
> executing vlogin -t 120 -c"show hardware cpu;show hardware dmi;show hardware
>
Thu, Jun 02, 2022 at 12:31:37PM -0500, Chris Wopat:
> Looking to see if we can get an easy patch added to fortigate.pm to filter
> out some more filter_osc stuff. for context, in the past some stuff was
> added here:
>
> https://shrubbery.net/pipermail/rancid-discuss/2017-June/009636.html
>
> We
Thu, Jul 21, 2022 at 07:27:07PM +, AJ Schroeder:
> I'll just get this out of the way, I have inherited a customized version of
> RANCID (v2.3.8) that we use to backup a bunch of different devices from all
> kinds of manufacturers. From what I can tell the customization that has been
> done
Thu, May 05, 2022 at 04:37:20PM +1200, Daniel Kerse:
> I wonder if this should be the default behaviour rather than the exception.
> Does anyone really use rancid to track changes to files on their routers?
If what should be the default? I'm not sure that I understand; please explain.
Mon, May 02, 2022 at 11:19:00PM -0400, Chuck Anderson:
> On Mon, May 02, 2022 at 04:38:31PM -1000, Steve O'Brien wrote:
> > I have looked at a bunch of similar questions but still have not figured
> > out how to get rancid to ignore the timestamp diff in IOS-XE devices.
> >
> > - !Flash:
Wed, May 04, 2022 at 05:38:54PM -1000, Steve O'Brien:
> Anyone? Hints, clues, anything?
>
> On Mon, May 2, 2022 at 4:38 PM Steve O'Brien wrote:
>
> > I have looked at a bunch of similar questions but still have not figured
> > out how to get rancid to ignore the timestamp diff in IOS-XE
Sat, Aug 27, 2022 at 06:17:33PM -0700, Randy Bush:
> >>> is it sufficient to just rename the alias's target, i.e.
> >>>
> >>> in `/etc/rancid.types.conf`
> >>>
> >>> juniper;alias;junosx <<<---
> >>> junosx;script;rancid -t junos
> >>> junosx;login;jlogin
> >>>
Sun, Aug 28, 2022 at 10:16:17AM -0700, Randy Bush:
> i am getting repeated diffs of the running config because the ssh
> config, which has not changed (nothing has) is fooling rancid that
> something has changed.
>
> this began when i added an ssh key
>
>
> ```
> diff --git
Mon, Aug 29, 2022 at 09:05:20AM -0700, Randy Bush:
> > Since I monitor this device as well, I too saw this. It appears to
> > have not displayed the first line of output, then did, repeat once,
> > then settled.
>
> so an oddity in arcos display? if so, given a clean example, i can
> chase with
Sat, Aug 27, 2022 at 05:48:27PM -0700, Randy Bush:
> > is it sufficient to just rename the alias's target, i.e.
> >
> > in `/etc/rancid.types.conf`
> >
> > juniper;alias;junosx <<<---
> > junosx;script;rancid -t junos
> > junosx;login;jlogin
> > junosx;timeout;120
> >
Tue, Oct 18, 2022 at 11:42:17AM -0300, OlivaFN88:
> Hi, I'm new here.
>
> I'm looking for some way to send a report through script, Telegram in my
> case.
>
> Is it possible? How?
You have not indicated what you want to send to telegram. I presume that
you do not want to send diffs. So, a
e example appears to
create a user whose mbox is used for delivery, then forwarded to telegram.
Presumbly this could easily be modified to just read stdin, if you prefer
that.
> Thank you.
>
> Em ter., 18 de out. de 2022 às 12:50, heasley escreveu:
>
> > Tue, Oct 18, 2022 at
Mon, Oct 10, 2022 at 10:08:09AM +, simon ben:
> ending: Mon Oct 10 11:42:48 +03
> 2022--
> after making small changes the log file
>
> starting: Mon Oct 10
Wed, Oct 05, 2022 at 03:21:42PM +, Adam Thompson:
> OK! Having clogin work proves that RANCID can connect to the host and (I
> assume?) authenticate.
yes.
> No change in the SVN/GIT/whatever-you-use could mean that either RANCID
> wasn’t able to retrieve the configuration, wasn’t able to
Wed, Aug 17, 2022 at 03:55:36PM +, Piegorsch, Weylin William:
> I have three groups that I want to remove from RANCiD (version 3.4) w/ CVS.
> I've seen previous posts about *completely* removing groups, but I'd like to
> keep the attic.
> - one group is depopulated (that is, nothing in
Fri, Nov 18, 2022 at 09:22:18PM -0800, Randy Bush:
> bin/rancid version 3.13.99 calling Getopt::Std::getopts (version 1.12
> [paranoid]),
> running under Perl version 5.32.1.
>
> arrcus arcos after upgrade from 4.3.1 to 5.1.1
>
> Trying to get all of the configs.
> r2.sea.rg.net: missed
Fri, Jan 20, 2023 at 02:16:21PM -1000, Steve O'Brien:
> I have just started to deploy Arista switches in my mostly Cisco network.
> My first one that I added to Rancid is sending diffs every run:
>
> Index: configs/switch
> ===
>
Tue, Nov 01, 2022 at 10:26:02AM +, Eckersley, Alex:
> Hi,
>
> I want to get some extra information from HP procurves that we use, like
> "show lldp info remote-device" or "show cdp neighbors".
> The backup works well but I have no clue where to add these extra commands...
> can someone
Tue, Apr 04, 2023 at 07:16:28AM -1000, Steve O'Brien:
> Installed new Arista EOS version and seeing these every run:
>
>
> - ! Image: Uptime: 4 days, 18 hours and 50 minutes
> + ! Image: Uptime: 4 days, 19 hours and 50 minutes
> ! Image: Total memory: 3982764 kB
> - ! Image: Free memory:
Thu, Apr 06, 2023 at 12:11:26PM +, Adam Thompson:
> Just a reminder that the "set" output cannot always be uploaded directly to a
> PA in a disaster scenario, only the XML can be used for that. You can try to
> paste in the "set" output through either the serial port or an SSH session
>
Thu, Apr 06, 2023 at 02:36:35PM +0530, Anwar Durrani:
> Thanks heasley for reaching out, yes i have intentionally took off domain
> part for security reasons
You might have misunderstood.
> > > Firewall1.yourdomain.com;paloalto;up
> >
> > to be pedantic, additiona
Wed, Apr 05, 2023 at 07:21:17AM -0400, Chris Weakland:
> Palo Alto support has bee. built into Rancid for some time, no need for any
additional scripts. The device type is: paloalto
indeed; there is also device type paloaltoxml for the xml config.
> Your router.db looks incorrect, it should
Thu, Jul 13, 2023 at 03:42:29AM +, Piegorsch, Weylin William:
> I worked with Heasley (very) sporadically over the past few years on this.
> Short version: control-rancid has around line 122:
>
>
> if [ -z "$ENVFILE" ] ; then
>
> ENVFILE=&quo
> At the end of the day, rancid is an automated solution trying to connect to
> devices that require authentication. The details need to be stored somewhere
> on the system that runs rancid, and if they are available to rancid, they are
> available to anyone who can gain rancid's permissions
Thu, May 04, 2023 at 12:53:22PM +, Piegorsch, Weylin William:
> Good question, I’m not claiming to be expert on reading the output but I’m
> not seeing anything glaring. It’s almost like clogin isn’t using my password
>
if you privately share your cloginrc with me, I'll help you debug it:
Sun, Dec 10, 2023 at 11:18:53PM -0500, Jon Lewis:
> On Sat, 9 Dec 2023, Jon Lewis wrote:
>
> > --- ios.pm.orig 2020-10-15 11:26:17.0 -0400
> > +++ ios.pm 2023-12-09 22:21:50.408683973 -0500
> > @@ -2787,7 +2794,7 @@
> > # The ContentEngine lacks a definitive "end of config"
Fri, Dec 01, 2023 at 10:39:29AM +, michael gauthier:
> Hello,
>
> I'm trying to integrate Dell switching S4148F-ON (Dell EMC Networking OS10
> Enterprise) but whatever type I'm choosing I have error.
>
> With dnos10:
>
> rancid@vm:~$ NOPIPE=yes rancid -d -t dnos10 switch1
> loadtype:
idea, so will see if anyone else volunteers.
Best if I could access it myself, but if the login script was well tested,
then just the complete transcript of the login might be enough.
> Linwood
>
>
>
> -Original Message-
> From: heasley
> Sent: Friday
Wed, Dec 06, 2023 at 08:56:55PM +, Adam Thompson:
> I happen to know the answer to that! The M4250 is CLI-manageable and
> configurable. The key term in Netgear-ese is "Fully Managed", which means
> full CLI, SNMP, as well as WebUI. Doesn't mean they didn't forget to include
> some
Fri, Dec 08, 2023 at 03:34:46PM +, o...@leferguson.com:
> I am unclear on terminology, and sure you don't mean just a login, but the
> output of a bunch of show commands? Is there a sequence I feed it or
> something that might give you what you want? (I can guess and just give the
>
Fri, Dec 08, 2023 at 03:42:42PM +, o...@leferguson.com:
>
> > Right, so that I can see its behavior, the complete output from:
> > loginscript -c 'cmd;cmd;...' hostname > output 2>&1
>
> Perfect. And cmd are each show. Let me clear it with my contact there, but I
> think that will be
Wed, Dec 06, 2023 at 06:00:08PM +, o...@leferguson.com:
> I have several clients for whom I use rancid and they are all cisco.
>
> I have one who had a horrible mixture of D-Link, Cisco, Netgear, etc. Over
> years I modified, kludged, hacked and re-kludged rancid trying to make it
>
d.
4) Option 1 + one of options 2 or 3.
Opinions?
> from Affa Pan
>
> heasley 於 2024年1月30日 上午7:18 寫道:
>
> Wed, Jan 17, 2024 at 01:46:44PM -0600, Daniel Schmidt:
> This one's driving me nuts.
>
> -!Flash: harddisk: 22 GB total (93% free)
> +!Flash: harddisk: 22 GB
Wed, Jan 17, 2024 at 01:46:44PM -0600, Daniel Schmidt:
> This one's driving me nuts.
>
> -!Flash: harddisk: 22 GB total (93% free)
> +!Flash: harddisk: 22 GB total (94% free)
> !
> !0/RP0-IDPROM - ASR 9900 Fixed Chassis Route Processor
>
> Slight modification somewhere in here?
you mean that
Tue, May 07, 2024 at 10:05:45AM -0700, Randy Bush:
> i have some foo routers, mostly hardware, but two VMs. in the latter,
> `show hardware` does not work very well :)
>
> do i have to clone the router type, or is there a hack to just say 'skip
> this section for this router?
generally, i've
Thu, Apr 09, 2020 at 08:11:15PM +, Bill Owens:
> After many years of trouble-free RANCID use, we ran into a snag trying to get
> our shiny new Cisco NCS 5000 router into the system. It appears there were
> significant CLI changes between 6.x and 7.x, primarily the complete
> elimination of
Tue, Apr 28, 2020 at 02:05:00PM +, Charles T. Brooks:
> If you haven't defined CVSROOT then CVS won't know where to create CVS
> objects, n'est-ce pas?
>
> Until you define it, CVS can't work. Google your error message.
>
> CVSROOT is usually set in a bash profile (or whatever login
Tue, Apr 28, 2020 at 08:24:01PM +, Tim McIntire:
> Hi All,
>
> Having a problem with Rancid 3.9 with Fortigate 100E firewall. Each hour,
> the config is updated with new Virus files and it is triggering an
> update/email for the change.
>
> Here is the delta:
>
> @@ -1,12 +1,12 @@
>
>
Mon, May 04, 2020 at 06:23:32PM -0500, Ryan Gelobter:
> Maybe there's an option or a patch I'm missing but I've noticed if I have
> that on, rancid fails to backup because it messes with the first line it
> expects when it logs in.
I think this is what you're looking for, also in rancid 3.8:
Tue, May 12, 2020 at 07:12:41PM +, Wayne Eisenberg:
> Hi,
>
> I'm sure it's there and I'm just not searching properly, but how does rancid
> stop the '--More--' prompt on Catalyst switches? I usually see/use 'terminal
> length 0' , but I don't find that in the rancid.pm or ios.pm modules.
Fri, May 08, 2020 at 05:13:24PM +0100, Craig Hopkins:
> In your router.db file mark them as down
FWIW, anything other than 'up' is considered 'down'; meaning that you can
mark these devies with some other tag, such as "temporarily_disabled".
A trailing field may also exist, such as:
Wed, Mar 18, 2020 at 12:46:17PM +0800, James Andrewartha:
> Hi,
>
> On 17/3/20 3:19 am, sebastien.boulia...@cpu.ca wrote:
> > Is it possible to know if this issue still exist ?
> >
> > https://medium.com/@schweikert/backing-up-fortinet-devices-with-rancid-c990f5251ed0
> >
> > Does Rancid
Thu, Aug 13, 2020 at 11:26:35AM +, Abagiu Andreia-Elena:
> Instead of show system info, show chassis inventory and show config, I would
> be more interested in extracting the running configuration for a single
> customer (not for the whole Panorama - all the Firewalls - as per default).
>
Thu, Nov 12, 2020 at 07:19:36AM -0600, Chris Wopat:
> I recently updated to v3.13, I do not recall exactly what version I
> was on but it was >1 year old, and could've been HEAD based on some
> previous debugging of other issues.
>
> Anyhow, we have many IOS devices that calculate percent free
Fri, Nov 13, 2020 at 01:03:54PM +, Pan Affa:
> I’m expecting the postscript filter because there more and more files in
> flash. I need per-device per-tag postscript filter.
>
> from Affa Pan
> > or, i have almost finished an option for a user-defined per-device type
> > postscript filter.
Fri, Nov 13, 2020 at 04:27:02PM +, Emille Blanc:
> Our patch around this (pre RANCID v3.10) was not to ignore the disk space,
> but rather impose an upper ceiling for our ASR920's.
> Eg;
> - !Flash: bootflash: 1339412480 bytes total (470 MB free)
> + !Flash: bootflash: 1339412480 bytes total
the system.
You probably need a clean working copy.
cd
mv .old
svn co `(cd .old; svn info --show-item url)`
> But thanks, I think that I look that error from SVN then.
>
> -mikko
>
>
> ________
> Lähettäjä: john heasley
> Lähetetty: 8. he
Wed, Feb 10, 2021 at 10:59:21AM +0100, krashoverr...@free.fr:
> Good morning list,
>
> Has any of you successfully backed-up a Lenovo switch config ?
> I'm trying to figure out what's not working, starting from Cisco templates
> and adjusting here and there, however it does not work.
> Basically
92 matches
Mail list logo