If it is a new White Ind BB, the will swap you spindles.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To
Your best choice would be to buy a new spindle that is the right length. Your
cheapest choice that is still a good choice is to trade with somebody. A bottom
bracket that is both the right length and will last for 5+ years is twenty
bucks or so. Sell your too short unit, buy the right sized
Matty,
With the White Ind BB, you need enough threads exposed on the non-drive side BB
cup to thread on the lock ring and tighten it down. Depending on the variance
of width on your BB shell, you may be able to make this work. If you can't
effectively lock down the lock ring, you will
I need 2mm more spindle length on a White Industries Bottom Bracket I want to
use on my Quickbeam.
Is there danger to use a 2mm spacer that there is not enough thread to the
shell?
I figure it is since spacers are sold. I called WI and said 1mm is OK 2mm is a
little too much. It sounded
