[RBW] Re: 0mm offset Nitto Quill Stem

It seems Crust is getting some nitto products made. Maybe the 0 offset stem is kind of like a "Simworks by nitto" sort of deal? https://crustbikes.com/nitto-crust/ -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this

[RBW] Re: 0mm offset Nitto Quill Stem

Related, there's a vintage Jack Taylor variant on Ebay . Historical Reenactment + New Skool Kool FTW Jeff Hagedorn Los Angeles, CA USA -- You received this message because you

Re: [RBW] Re: 0mm offset Nitto Quill Stem

Will do. > On May 6, 2019, at 1:56 PM, esoterica etc wrote: > > > Oooh Kellie, please post some pics when you get that cockpit set up. I’m > planning on doing something very similar to my Atlantis too. > > ~Mark > Raleigh, NC > > >> On May 6, 2019, at 16:08, Kellie wrote: >> >> these

Re: [RBW] Re: 0mm offset Nitto Quill Stem

Oooh Kellie, please post some pics when you get that cockpit set up. I’m planning on doing something very similar to my Atlantis too. ~Mark Raleigh, NC > On May 6, 2019, at 16:08, Kellie wrote: > > these are on the way to my house for my Atlantis, matched with Cowchipper > bars. > >> On

[RBW] Re: 0mm offset Nitto Quill Stem

these are on the way to my house for my Atlantis, matched with Cowchipper bars. On Sunday, May 5, 2019 at 2:55:06 PM UTC-7, jandrews wrote: > > Curious if anyone has tried something like this on their threaded fork? > > Nitto MTC-04, Short Nitto quill to threadless adapter > > [image:

[RBW] Re: 0mm offset Nitto Quill Stem

I don’t know the exact measurements but an 8cm Nitto dirt drop might give you something not too far off from that LD stem but without all the adaptors and extra boltage. ButI guess that crust one is a 4cm. With them being that close, you might as well try the 5cm technomic. Then you can

[RBW] Re: 0mm offset Nitto Quill Stem

Curious if anyone has tried something like this on their threaded fork? Nitto MTC-04, Short Nitto quill to threadless adapter [image: nitto-mtc-04-stem-adapter-130mm-10.gif.jpeg] and a tall and short-extension threadless stem like the LD or something similar [image: raw-ld2-1024x683.jpg]

[RBW] Re: 0mm offset Nitto Quill Stem

VO and Factory Five make some decent faceplate quills, but both are flawed: VO's has those ugly above-bar bolts on it and a 90-degree bend that results in some rise, and the F5 Titan's height is 60mm less than the Technomic and only comes in 90mm extension and for 31.8mm handlebars. I believe

[RBW] Re: 0mm offset Nitto Quill Stem

Me too, but I think most removable face plate stems are ugly. I don't care for the above the bar bolts on them. On Monday, April 29, 2019 at 8:48:14 PM UTC-7, Eric Myers wrote: > > Man, I would love to see nice looking quill stems with removable faces... > > On Monday, April 29, 2019 at 2:52:14

[RBW] Re: 0mm offset Nitto Quill Stem

Man, I would love to see nice looking quill stems with removable faces... On Monday, April 29, 2019 at 2:52:14 PM UTC-7, jandrews wrote: > > I also wrote Matt and this I what he said about the sizing : > > “They are actually 30mm reach. I will also have some in 50mm as well as a > bunch of

[RBW] Re: 0mm offset Nitto Quill Stem

I also wrote Matt and this I what he said about the sizing : “They are actually 30mm reach. I will also have some in 50mm as well as a bunch of removable face versions.” -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from

[RBW] Re: 0mm offset Nitto Quill Stem

"Available soon," to "no idea" in less than a week. Helpful, ha Still looking forward to the next batch, whoever makes them. On Monday, April 29, 2019 at 10:39:39 AM UTC-7, John Phillips wrote: > > I emailed Matt at Crust Bikes asking if he had a "guesstimate" when > these Nitto stems would

[RBW] Re: 0mm offset Nitto Quill Stem

I emailed Matt at Crust Bikes asking if he had a "guesstimate" when these Nitto stems would be in stock, and he said he had "no idea at the moment." John On Saturday, April 27, 2019 at 5:52:18 AM UTC-7, Christopher Cote wrote: > > That stem is incredible. I can see myself building a bike

[RBW] Re: 0mm offset Nitto Quill Stem

That stem is incredible. I can see myself building a bike around one. From the comments on the Radavist page, it sounds like Crust is having Nitto make them, and they intend to be available soon. Given Crust's ability to stock things, I'm not holding my breath. I do hope it happens, though.

[RBW] Re: 0mm offset Nitto Quill Stem

Ah I see that now. Shoulda read the whole thing. I have an analog stem that I like a lot. It’d be cool to have a Nitto version, though I’d hope that analog gets some credit or kickback for taking the (re-)initial plunge. -- You received this message because you are subscribed to the Google

[RBW] Re: 0mm offset Nitto Quill Stem

That particular bike (the owners bike, that has a few other "custom" tidbits) is a threaded one, but yes, the Nor'easter is a threadless bike. I wonder if these are done in conjunction with Analog based on the (W)right stems? I think they were the re-instigiators of the minimal offset stems.