Hey Bob,
I installed an M12 on my Paul Touring Cantis (with the Paul Rack Adapters).
I agree with Bill L. that the UD-2's adjustable side struts -- or the VO
rando rack's adjustable fork crown strut -- make leveling the rack way
easier (for those of us with canti boses but without dedicated ra
Bill,
Thank you for this. I recall reading the very thing some years ago, but
have been unable to find it again; hence my post here.
I have the RH UD-1 on one bike, and am impressed with it, so the UD-2 may
be the way I go.
--
Bob
On Wednesday, August 9, 2023 at 3:41:59 PM UTC-6 Bill Lindsay
You are getting good advice on workarounds for this combination. I think
you understand it, but I think for the benefit of others, it's worth
stating that the Nitto M12 + Paul Cantilever brakes is not an ideal
combination. The Nitto M12 was made to work with cantilever brakes that do
not exte
Yup. I only went to the longer bolt set up after striping out VO canto-rack bolts cause they didn’t provide enough spacing. On Aug 9, 2023, at 7:37 AM, greenteadrinkers wrote:I have a set of the Paul rack mount bolts I'd sell for cheap if you are interested. They didn't work out for me.Best,Scott
I have a set of the Paul rack mount bolts I'd sell for cheap if you are
interested. They didn't work out for me.
Best,
Scott
On Wednesday, August 9, 2023 at 10:20:26 AM UTC-4 rcook...@gmail.com wrote:
> Essentially the procedure, whether using chainring bolts or non-threaded
> spacers, is just
Essentially the procedure, whether using chainring bolts or non-threaded
spacers, is just repace Paul's supplied M6 bolt with a bolt long enough to
clear whatever I'm using for spacers plus the rack stay itself. Seems
simple enough. Thank you.
On Tuesday, August 8, 2023 at 7:27:06 PM UTC-6 brizb
Yes, a longer M6 is needed to make up whatever additional length is added
with the spacer.
On Monday, August 7, 2023 at 6:37:29 PM UTC-4 rcook...@gmail.com wrote:
> Thanks, Steven. So I'd just need a longer M6 screw along with these
> spacers? The Touring Cantis have a 20 mm screw, so I'd need s
Thanks, Steven. So I'd just need a longer M6 screw along with these
spacers? The Touring Cantis have a 20 mm screw, so I'd need something like
an M6x40?
--
Bob
On Monday, August 7, 2023 at 4:00:35 PM UTC-6 S. Greco wrote:
> I recommend using spacers instead of the rack adapters. The rack adap