Helicopter tape-don't have to use zip ties.
On Monday, July 17, 2017 at 2:01:58 PM UTC-7, Carla Waugh wrote:
>
> Someone sent me a picture of how they used a Marks rack with a basket
> showing how the wiring was done. I wondered if someone has a picture they
> could show?
--
You received
Thanks, Ian.
I ran the taillight wire along the shifter cable then (taped) up the inside
of the fender.
On Tuesday, July 18, 2017 at 1:19:14 PM UTC-4, Ian Strader wrote:
>
> What did you use to secure the tail light wire to the frame? Gorgeous
> build, my dude.
>
> On Tuesday, July 18, 2017 at
What did you use to secure the tail light wire to the frame? Gorgeous
build, my dude.
On Tuesday, July 18, 2017 at 6:55:26 AM UTC-7, Shoji Takahashi wrote:
>
> Hi Carla,
> Here's a pic with the Nitto Front Rack instead of Mark's Rack:
> https://flic.kr/p/MU5VJN (enlarge to see some detail).
>
>
Hi Carla,
Here's a pic with the Nitto Front Rack instead of Mark's
Rack: https://flic.kr/p/MU5VJN (enlarge to see some detail).
I wrapped the wire up the drive-side fork leg and then wrapped up the strut
(from the mid-fork brazeon) to the front mount.
Good luck!
shoji
On Monday, July 17,
I don't use a Marks rack, but I'd imagine that you could just run the
wiring up the DS fork leg, across the crown, then forwards on the fork
crown stay and the underside of the rack to the light mount. Ziptied into
place, or just wrapped around the fork leg, stay, and rack rails.
-david
