try teflon tape
On Monday, July 23, 2012 2:44:06 AM UTC-4, Donald Lee wrote:
I installed a CroMo Albatross bar to my Nitto stem, but did not use grease
where the stem clamps to the handlebar. Thinking about it, I'm not sure
what is the best practice. What do you folks recommend?
--
You
I have read on the Jim Langley noise silencing page that putting grease
there stops creaking, if you are getting creaking noises that are from
there.
On Monday, July 23, 2012 2:44:06 AM UTC-4, Donald Lee wrote:
I installed a CroMo Albatross bar to my Nitto stem, but did not use grease
Unanimous consensus for no grease, which makes sense, especially when Jim
pointed out the extra leverage of the a-bars. Maybe beeswax/lanolin for
galvanic corrosion, or maybe not.
--
You received this message because you are subscribed to the Google Groups RBW
Owners Bunch group.
To view this
The only grease I've ever put there also contained a carbide powder -
valve grinding paste, an old trick to prevent the bars from slipping...
--
You received this message because you are subscribed to the Google Groups RBW
Owners Bunch group.
To view this discussion on the web visit
No never nada !
I've never in 40 years of playing with bicycles greased inside the clamp !
Steel bar with steel stem , AL with steel, AL with AL no grease ever
. You want a dry interface there , the friction is it's friend to keep
the bar from shifting :)
On Monday,
I use the Lanolube from Riv. Beeswax will work but I don't have the
patience to soften it.
On Thursday, July 26, 2012 5:01:20 PM UTC-5, Jim M. wrote:
If you want to put something there to prevent galvanic corrosion, I'd
suggest beeswax or lanolin rather than something slippery.
jim m
wc
If you want to put something there to prevent galvanic corrosion, I'd
suggest beeswax or lanolin rather than something slippery.
jim m
wc ca
On Sunday, July 22, 2012 11:44:06 PM UTC-7, Donald Lee wrote:
I installed a CroMo Albatross bar to my Nitto stem, but did not use grease
where the