Ahh apologies, I see what you're saying now. I never actually removed the
shifters from the clamps so can't speak to that. I just reversed the entire
shifter assemblies around.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To
Oh, golly! Thank you. I have outbound hemispheric reversal (a fancy way of
saying I see the correct orientation bit it gets turned around on the way out)
so I frequently have things backwards. This was very helpful.
> On Mar 18, 2024, at 2:31 PM, DavidP wrote:
>
>
> Hi Kiley,
>
> Your
Thank you. The only issue is I kinda like indexing shifters...
On Sunday, March 17, 2024 at 6:06:01 AM UTC-7 Joe Bernard wrote:
> You swap 'em without cables installed: left goes on right, right goes on
> left. Then you put the cables on and run them in friction.
>
> Once it's done it will
Hi Kiley. I'm running 9sp Microshift thumbies reversed and it works really
well. As Joe says, you install (without cabling) the original left/FD
shifter on the right side under the bar, and original right/RD shifter on
the left. I'm not sure what you mean by easy to reverse on the holders or
You swap 'em without cables installed: left goes on right, right goes on
left. Then you put the cables on and run them in friction.
Once it's done it will seem simple but I can verify the brain takes a
minute to grasp the idea.
On Saturday, March 16, 2024 at 11:15:30 AM UTC-7 Kiley Demond
Hi Kiley,
Check out this old thread for some pertinent information:
https://groups.google.com/g/rbw-owners-bunch/c/VS2OKsjxd3U
Doug
On Saturday, March 16, 2024 at 2:15:30 PM UTC-4 Kiley Demond wrote:
> I am *still* getting my Clem L finished (it was 'found' stock which I now
> understand was
