Thanks Patrick, that's great to hear. I'll give it a try.
Pete
On Thursday, August 30, 2018 at 11:19:12 AM UTC-4, Patrick Moore wrote:
>
> With a 10 speed chains, I've only used Sugino and Vuelta, and there is no
> difference in their performance.
>
> Note, I use a 42 in the middle position
With a 10 speed chains, I've only used Sugino and Vuelta, and there is no
difference in their performance.
Note, I use a 42 in the middle position and a 28 in the granny/inside
position; no outer (there's a guard there instead). But no problems
shifting between the inner 2 rings with 10 speed
Thanks everyone.
Patrick, have you found some chainrings better than others on on your Logic
crank? Somewhere -- either here on or iBob -- I read that TA's rings might
work best. I don't have the 42t ring I need so I figure it can't hurt to
get one from Peter White. On the other hand, he
IME, you might well be lucky and have no problem running 10 speeds with old
cranks. I'm happily using a 10 speed chain with a 8-speed era Logic crank;
no problems.
Friction front shifting, btw.
On Wed, Aug 29, 2018 at 7:58 AM, EasyRider wrote:
> Riv has said that these cranks aren't 10 speed
Riv has said that these cranks aren't 10 speed compatible and others have said
it's because the xd2 spider spaces the rings a bit too wide for 10 speed setups
(either the narrower chain falls into the gap between rings or an indexed FD
doesn't push the chain sideways enough to make the shift,
