Resurrecting an old thread – Mainly wondering about the differences between
Simple One and Quick Beam frames, and also if there were any step-ups in
thickness with frame size (e.g. 58 to 60 to 62). Anyone know?
- Max "where's the ultrasound probe when you need one" in A2
On Friday, August 26,
On Fri, Aug 26, 2011 at 7:25 AM, MikeC wrote:
> They all seem to use OS but what wall thicknesses,
> heat treated, manufacturer, etc.?
>
They definitely use OS tubing on the AHH. I kept looking at my AHH and
wondering why the head tube looked so much shorter and the frame looked so
much smaller
When I asked Mark about the Legolas and Roadeo a few months ago, he
showed me the spec sheet they sent to the builders. The Legolas and
Roadeo have the same tubing for top and seat tubes, fork blades and
chain stays. The Legolas downtube is slightly heavier at .7/.5/.7 vs
.65/.45/65 for the Roadeo.
While tubing names may not matter among high-quality tubes, I think wall
thickness can be good to know, especially with OS tubing which IMO can be
dent-prone if the walls are too thin.There's a post on the Rivendell
site somewhere about the specs for the AHH- IIRC it has 8/5/8 top and down
on 8/26/11 7:25 AM, MikeC at mecinib...@sbcglobal.net wrote:
> I was wondering if anyone has compiled a list of tubing specs for
> Rivendell's frames. They all seem to use OS but what wall thicknesses,
> heat treated, manufacturer, etc.?
I've never pulled together a list of such specs, but I'm no
On Aug 26, 2011, at 9:56 AM, Leslie wrote:
> Depends on which frame, which size of which frame, which maker of the frame
> (Waterford, Toyo, Nobliette, etc), when the frame was made... Not really sure
> it'd be quite possible to pin *every* variant down...
Given that Grant took to mixing and m
Depends on which frame, which size of which frame, which maker of the frame
(Waterford, Toyo, Nobliette, etc), when the frame was made... Not really sure
it'd be quite possible to pin *every* variant down...
Any particular frame that you're querying? For example, on cyclofiend's site,
the Ram
I was wondering if anyone has compiled a list of tubing specs for
Rivendell's frames. They all seem to use OS but what wall thicknesses,
heat treated, manufacturer, etc.?
Mike C
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To post to thi