Hi, I have a Hillborne with a Nitto Mini front rack, and would like to install a Nitto M-12 front rack on my Fisher monstercross (700C). The fork has gobs of clearance, and I have been told that these racks don't fit all forks, depending on the distance between the fork crown hole and the canti bosses. The distance on my fork from center of canti boss to center of fork crown hole (measured diagonally) is 11cm. Can anyone tell me if that is going to work? (Here is a photo: http://www.flickr.com/photos/25150...@n08/4439615305/in/photostream/)
Also, note that the crown is only drilled in the back to accept a fender mounting bolt. Any advice on drilling out the fork crown? I am planning to use a drill bit that just fits through the fender mounting hole to drill a pilot hole through the front part of the fork crown, and then use the correct size (8mm?) to widen the hole in the front and back of the crown. Thanks, Gernot -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
